The Safety Assessment of Cosmetic Perfumes by Using In Chemico and In Vitro Methods in Combination with GC-MS/MS Analysis.

Animal testing has been prohibited for the safety assessment of cosmetic ingredients or finished products. Thus, alternative non-animal methods, followed by confirmatory clinical studies on human volunteers, should be used as the sole legally acceptable approach within the EU. The safety assessment of cosmetic products requires the involvement of multiple scientific disciplines, including analytical chemistry and biomedicine, as well as in chemico, in vitro and in silico toxicology. Recent data suggest that fragrance components may exert multiple adverse biological effects, e.g. cytotoxicity, skin sensitisation, (photo)genotoxicity, mutagenicity, reprotoxicity and endocrine disruption. Therefore, a pilot study was conducted with selected samples of fragrance-based products, such as deodorant, eau de toilette and eau de parfum, with the aim of integrating results from a number of alternative non-animal methods suitable for the detection of the following toxicological endpoints: cytotoxicity (with 3T3 Balb/c fibroblasts); skin sensitisation potential (in chemico method, DPRA); skin sensitisation potential (LuSens in vitro method, based on human keratinocytes); genotoxicity potential (in vitro Comet assay with 3T3 Balb/c cells); and endocrine disruption (in vitro YES/YAS assay). The presence of twenty-four specific known allergens in the products was determined by using GC-MS/MS. The strategies for estimation of the NOAEL of a mixture of allergens, which were proposed by the Scientific Committee on Consumer Products in their 'Opinion on Tea tree oil' document and by the Norwegian Food Safety Authority in their 'Risk Profile of Tea tree oil' report, were used as models for the NOAEL estimation of the mixtures of allergens that were identified in the individual samples tested in this study.

Low-cost and prototype-friendly method for biocompatible encapsulation of implantable electronics with epoxy overmolding, hermetic feedthroughs and P3HT coating.

The research of novel implantable medical devices is one of the most attractive, yet complex areas in the biomedical field. The design and development of sufficiently small devices working in an in vivo environment is challenging but successful encapsulation of such devices is even more so. Industry-standard methods using glass and titanium are too expensive and tedious, and epoxy or silicone encapsulation is prone to water ingress with cable feedthroughs being the most frequent point of failure. This paper describes a universal and straightforward method for reliable encapsulation of circuit boards that achieves ISO10993 compliance. A two-part PVDF mold was machined using a conventional 3-axis machining center. Then, the circuit board with a hermetic feedthrough was placed in the mold and epoxy resin was injected into the mold under pressure to fill the cavity. Finally, the biocompatibility was further enhanced with an inert P3HT polymer coating which can be easily formulated into an ink. The biocompatibility of the encapsulants was assessed according to ISO10993. The endurance of the presented solution compared to silicone potting and epoxy potting was assessed by submersion in phosphate-buffered saline solution at 37 °C. The proposed method showed superior results to PDMS and simple epoxy potting.

The Potential for Genotoxicity, Mutagenicity and Endocrine Disruption in Triclosan and Triclocarban Assessed through a Combination of In Vitro Methods.

Triclosan and Triclocarban, preservatives widely used in cosmetics and other consumer products, underwent evaluation using a battery of new-approach methodologies in vitro (NAMs). Specifically, the Microplate Ames Test (MPF™ Test, Xenometrix, Allschwil, Switzerland) was employed to assess mutagenicity, the Comet assay in vitro on the HaCat cell line and the Mammalian Chromosome Aberration Test were utilized to evaluate genotoxicity, and the XenoScreen® YES/YAS assay was applied to investigate endocrine disruption. The chemicals did not exhibit any positive responses for mutagenicity. However, the mammalian chromosome aberration test identified both chemicals as being positive for genotoxicity at 10 µg/mL. In the Comet assay, the percentage of DNA in the tail significantly increased in a concentration-dependent manner (at 5 and 10 µg/mL for Triclosan, at 2.5, 5, and 10 µg/mL for Triclocarban). The positive response depended on the increasing concentration and the duration of exposure. Triclosan, but not Triclocarban in any of the endocrine assays performed, indicated a potential for endocrine activity in the anti-estrogenic and anti-androgenic assays. The positive in vitro results detected were obtained for concentrations relevant to final products. The alarming findings obtained with the use of new-approach methodologies (NAMs) justify the current precautionary regulatory approach, limiting the use of these preservatives.

The Current Status and Work of Three Rs Centres and Platforms in Europe.

The adoption of Directive 2010/63/EU on the protection of animals used for scientific purposes has given a major push to the formation of Three Rs initiatives in the form of centres and platforms. These centres and platforms are dedicated to the so-called Three Rs, which are the Replacement, Reduction and Refinement of animal use in experiments. ATLA's 50th Anniversary year has seen the publication of two articles on European Three Rs centres and platforms. The first of these was about the progressive rise in their numbers and about their founding history; this second part focuses on their current status and activities. This article takes a closer look at their financial and organisational structures, describes their Three Rs focus and core activities (dissemination, education, implementation, scientific quality/translatability, ethics), and presents their areas of responsibility and projects in detail. This overview of the work and diverse structures of the Three Rs centres and platforms is not only intended to bring them closer to the reader, but also to provide role models and show examples of how such Three Rs centres and platforms could be made sustainable. The Three Rs centres and platforms are very important focal points and play an immense role as facilitators of Directive 2010/63/EU 'on the ground' in their respective countries. They are also invaluable for the wide dissemination of information and for promoting the implementation of the Three Rs in general.

New approach methods for assessing indoor air toxicity.

Indoor air is typically a mixture of many chemicals at low concentrations without any adverse health effects alone, but in mixtures they may cause toxicity and risks to human health. The aim of this study was by using new approach methods to assess the potential toxicity of indoor air condensates. In specific, different in vitro test methods including cyto-and immunotoxicity, skin sensitization and endocrine disruption were applied. In addition to biological effects, the indoor air samples were subjected to targeted analysis of 25 volatile organic compounds (VOCs) and Genapol X-80 (a nonionic emulsifier) suspected to be present in the samples, and to a non-targeted "total chemical scan" to find out whether the chemical composition of the samples is associated with the biological effects. The results confirm that assessing health risks of indoor air by analysing individual chemicals is not an adequate approach: We were not able to detect the VOCs and Genapol X-80 in the indoor air samples, yet, several types of toxicity, namely, cytotoxicity, immunotoxicity, skin sensitization and endocrine disruption were detected. In the non-targeted total chemical scan of the indoor air samples, a larger number of compounds were found in the cytotoxic samples than in the non-cytotoxic samples supporting the biological findings. If only one biological method would be selected for the screening of indoor air quality, THP-1 macrophage/WST-1 assay would best fit for the purpose as it is sensitive and serves as a good representative for different sub-toxic end points, including immunotoxicity, (skin) sensitization and endocrine disruption.

The Rise of Three Rs Centres and Platforms in Europe.

Public awareness and discussion about animal experiments and replacement methods has greatly increased in recent years. The term 'the Three Rs', which stands for the Replacement, Reduction and Refinement of animal experiments, is inseparably linked in this context. A common goal within the Three Rs scientific community is to develop predictive non-animal models and to better integrate all available data from in vitro, in silico and omics technologies into regulatory decision-making processes regarding, for example, the toxicity of chemicals, drugs or food ingredients. In addition, it is a general concern to implement (human) non-animal methods in basic research. Toward these efforts, there has been an ever-increasing number of Three Rs centres and platforms established over recent years - not only to develop novel methods, but also to disseminate knowledge and help to implement the Three Rs principles in policies and education. The adoption of Directive 2010/63/EU on the protection of animals used for scientific purposes gave a strong impetus to the creation of Three Rs initiatives, in the form of centres and platforms. As the first of a series of papers, this article gives an overview of the European Three Rs centres and platforms, and their historical development. The subsequent articles, to be published over the course of ATLA's 50th Anniversary year, will summarise the current focus and tasks as well as the future and the plans of the Three Rs centres and platforms. The Three Rs centres and platforms are very important points of contact and play an immense role in their respective countries as 'on the ground' facilitators of Directive 2010/63/EU. They are also invaluable for the widespread dissemination of information and for promoting implementation of the Three Rs in general.

Qualitative and Quantitative Analysis of Certain Aspects of the Cytotoxic and Genotoxic Hazard of Hospital Wastewaters by Using a Range of In Vitro Assays.

Health care facilities and hospitals generate significant amounts of wastewater which are released into the sewage system, either after a preliminary treatment or without any further treatment. Hospital wastewater may contain large amounts of hazardous chemicals and pharmaceuticals, some of which cannot be eliminated entirely by wastewater treatment plants. Moreover, hospital effluents may be loaded with a plethora of pathogenic microorganisms or other microbiota and microbiome residues. The need to monitor hospital effluents for their genotoxic hazard is of high importance, as detailed information is scarce. DNA-based information can be acquired directly from samples through the application of various molecular methods, while cell-based biomonitoring assays can provide important information about impaired cellular pathways or mechanisms of toxicity without prior knowledge of the identity of each toxicant. In our study, we evaluated samples of chlorinated hospital wastewater discharged into the sewage system after this disinfection process. The assessment of cytotoxicity, genotoxicity and mutagenicity of the hospital effluents was performed in vitro by using a broad battery of biomonitoring assays that are relevant for human health effects. All the tested hospital wastewater samples could be classified as potentially genotoxic, and it is concluded that the microbiota present in hospital wastewater might contribute to this genotoxic potential.

Sensitization potential of medical devices detected by in vitro and in vivo methods.

Medical devices must be tested before marketing in accordance with ISO EN 10993-10 in order to avoid skin sensi­tization. This standard predominantly refers to the in vivo test but does not exclude the use of in vitro methods that have been sufficiently technically and scientifically validated for medical device testing. It is foreseen that, due to the complexity of the sensitization endpoint, a combination of several methods will be needed to address all key events occurring in the sensitization process. The objective of this pilot study was to evaluate the sensitization potential of selected medical devices using a combination of in chemico (DPRA, OECD TG 442C) and in vitro (LuSens, OECD TG 442D) methods in comparison with the in vivo (LLNA DA, OECD TG 442A) method and to suggest a possible testing strategy for the safety assessment of medical device extracts. Overall, one of the 42 tested samples exhibited positive results in all employed test methods, while 33 samples were predicted as non-sensitizing in all three performed methods. This study demonstrated good agreement between in vitro and in vivo results regarding non-sensitizing samples; however, some discrepancies in positive classification were recorded. A testing strategy is suggested in which negative results are accepted and any positive results in the in chemico or in vitro tests are followed up with a third in vitro test and evaluated in accordance with the "2 out of 3 approach". This strategy may reduce and replace animal use for testing the sensitization potential of medical devices.

Toxicological testing of a photoactive phthalocyanine-based antimicrobial substance.

The aim of the study was toxicological testing of an innovative and efficient antimicrobial agent based on photoactive phthalocyanine (Pc) derivative. A promising Aluminium phthalocyanine (AlPc) with efficient and stable antimicrobial effects was subjected to a battery of toxicological tests to avoid local and systemic toxicity hazard. In compliance with the current European legislation restricting the use of experimental animals, the methods comprised exclusively in vitro procedures based on cellular and tissue models of human origin or mimicking human tissues. The battery of toxicological tests to identify local toxicity included skin corrosion/irritation, eye irritation, and phototoxicity. The basic systemic toxicity tests included acute toxicity, skin sensitization, genotoxicity, and endocrine disruption. The results showed that AlPc induced skin and eye irritation, exhibited borderline sensitization potential and mutagenic potential in one test strain of the Ames test, which was not confirmed in the chromosome aberration test. The AlPc was found to be phototoxic. The results from the cytotoxicity test designed for acute oral toxicity estimation were not conclusive, the acute toxicity potential has to be determined by conventional tests in vivo. Regarding endocrine disruption, no agonistic activity of the AlPc on human estrogen receptor α, nor human androgen receptor was observed. The skin penetration/absorption test revealed that the AlPc has not penetrated into the dermis and receptor fluid, confirming no risk of systemic exposure via the bloodstream.

Toxicity of food contact paper evaluated by combined biological and chemical methods.

The study was focused on assessment of potential health risks of paper-based food contact materials (FCMs) in a step-wise approach using three toxicological bioassays in vitro and chemical analyses of migrating contaminants. 3T3 NRU cytotoxicity test showed high sensitivity to detect basal toxicity of FCMs extracts and served as a first-line test for selection of samples for further testing. The reconstructed human intestine model EpiIntestinal showed more realistic tissue response than cell culture monolayer and higher resistance despite prolonged exposure to the selected 6 samples, i.e. negligible decrease of viability and intestinal penetration, nevertheless an increase of IL-8 after exposure to black printed sample extract. Yeast based assays identified weak agonistic/antagonostic activity to human androgen receptor of the black printed sample. In accordance with the biological effects, the targeted LC and GC analytical methods confirmed the presence of high amounts of phthalates, photoinitiators and PAHs that could justify the hazard of the black printed sample. Heavily printed uncoated FCMs are recognized not to be suitable for direct contact with food. The selected bioassays and chemical analyses might be useful tools to detect targeted biological effects of xenobiotics suspected to contribute to human exposure from food.

Toxicity of wastewater from health care facilities assessed by different bioassays.

OBJECTIVES: The purpose of this study was to determine toxicity of wastewater from hospitals in the Czech Republic using traditional and alternative toxicological methods. The pilot study comprised weekly dynamics of sewage ecotoxicity of treated wastewater from one hospital in two different seasons. A detailed investigation of wastewater ecotoxicity, genotoxicity and reprotoxicity followed in five different hospitals. METHODS: The seven following bioassays were used in this study: algal growth inhibition test (ISO 8692), Vibrio fischeri test (ISO 11348-2), Daphnia magna acute toxicity test (ISO 6341), Allium cepa assay, Ames test (OECD TG 471), Comet assay and YES/YAS assay. RESULTS: The wastewater ecotoxicity during one week showed no differences in separate working days, however, higher toxicity values were recorded in May compared to November. In the following study, samples from two of the five hospitals were classified as toxic, the others as non toxic. Genotoxicity has not been confirmed in any sample. In several cases, wastewater samples exhibited agonist activity to the estrogen and androgen receptors. CONCLUSION: The study demonstrated different levels of toxicity of treated hospital wastewater. Variable sensitivity of individual bioassays for tested wastewater samples was recognized. A more extensive study including proposal for improvement of hospital wastewater treatment within the Czech Republic can be recommended with the aim to decrease the discharge of toxic chemicals into the local sewage system and the environment.

Selected bisphenols and phthalates screened for estrogen and androgen disruption by in silico and in vitro methods.

OBJECTIVES: The aim of this study was to detect endocrine disruption potential of selected bisphenols and phthalates, compare in silico prediction with results from two in vitro methods and bring up-to-date information on development of EU legislation, available in vitro methods and biomechanisms involved in endocrine disruption. MATERIAL AND METHODS: In silico approach based on the OECD QSAR Toolbox was used for prediction of estrogen receptor α binding. OECD TG 455 assay and a yeast-based YES/YAS assay was used to determine the interactions with human estrogen (ERα) and androgen receptors. RESULTS: In silico results predicted the screened phthalates as non binders and bisphenols as very strong binders of the ERα. In vitro results differed from in silico prediction in several cases but exhibited concordance mainly for strong binders of ERα. Most of the substances exhibited parallel activity (agonist-antagonist) on both estrogen and androgen receptors. Agonistic studies showed the effective concentration of 10% activity (EC10) from 5.0E-07 for strong agonists (e.g. BPC, BPTMC). Cytotoxicity was observed after 48 h exposure of S. cerevisiae to BPFL, BPG, BPM, BPTMC in concentrations starting at 3.6E-05 mol/l. CONCLUSION: Our results suggest multiple parallel interactions of tested compounds and emphasize the importance of determination of an appropriate battery of in vitro methods that will include more receptors and will be appropriate to target specific molecular mechanisms involved in endocrine disruption. Results in agonistic studies indicate agonistic potential and are supported by results of antagonistic studies with consideration of possible multiple interactions.

Comparison of metrological techniques for evaluation of the impact of a cosmetic product containing hyaluronic acid on the properties of skin surface.

The aim of this research was to evaluate mutual interchangeability of four principally different biometric instrumental techniques designed for objective measurement of changes in the physical, mechanical, and topographical properties of the skin surface treated with commercial antiaging cosmetic products with hyaluronic acid. The following instrumental devices were used: Visioscope PC 35, Corneometer Multiprobe Adapter MPA 6, Reviscometer RVM 600, and 3D scanner Talysurf CLI 500. The comparison of the individual methods was performed using cluster analysis. The study involved 25 female volunteers aged 40-65. Measurements were taken before and after 30 daily in vivo applications of an antiaging preparation to the skin surface in the periorbital area. A slight reduction in skin surface roughness was recorded in 55% of the volunteers. On the contrary, a worsening from their initial states was detected in 25% of the subjects, while for 20%, no significant change was reported. Cluster analysis confirmed that the mentioned methodologies can be divided into two basic clusters, namely, a cluster of methods recording the changes in skin relief by means of optical techniques, and a cluster of methods investigating changes in hydration and anisotropy. In practice, the techniques in different clusters are not interchangeable and should be assessed separately.

Behaviour of silver nanoparticles in simulated saliva and gastrointestinal fluids.

Continuously increasing application of silver nanoparticles (AgNPs) requires information on their safety and performance under biological conditions. Assessment of AgNPs in biological systems is also related to availability of robust toxicological methods for evaluation of toxic potential of AgNPs and information on their physicochemical state. Silver nanoparticles were subjected to action of simulated saliva, gastric and intestinal fluids, appropriately supplemented with digestive enzymes pepsin or pancreatin. The behaviour of AgNPs was determined using dynamic light scattering and transmission electron microscopy, and their toxicity as well as capability to induce inflammatory reactions were assessed using reconstructed human tissue models (EpiOral, EpiGingival, EpiIntestinal). The study revealed that during exposure to the fluids, AgNPs size and morphology changed and depended on composition and pH of the respective fluid. If present, the change in terms of growth of AgNPs size occurred immediately after contact of AgNPs with the respective fluid and continued with prolonged time of contact. A pilot study on reconstituted human tissue models revealed low toxicity and inflammatory effects of AgNPs and confirmed the suitability of 3-D models for toxicological studies including bioavailability.

Adverse Phototoxic Effect of Essential Plant Oils on NIH 3T3 Cell Line after UV Light Exposure.

AIM: Natural or artificial substances have become an inseparable part of our lives. It is questionable whether adequate testing has been performed in order to ensure these substances do not pose a serious health risk. The principal aim of our research was to clarify the potential risk of adding essential oils to food, beverages and cosmetic products. METHODS: The toxicity of substances frequently employed in cosmetics, aromatherapy and food industry (bergamot oil, Litsea cubeba oil, orange oil, citral) were investigated using cell line NIH3T3 (mouse fibroblasts) with/without UV irradiation. The MTT assay was used to estimate the cell viability. Reactive oxygen species (ROS) which are products of a number of natural cellular processes such as oxygen metabolism and inflammation were measured to determine the extent of cellular stress. DNA damage caused by strand breaks was examined by comet assay. RESULTS: MTT test determined EC50 values for all tested substances, varying from 0.0023% v/v for bergamot oil to 0.018% v/v for citral. ROS production measurement showed that UV radiation induces oxidative stress to the cell resulting in higher ROS production compared to the control and non-irradiated samples. Comet assay revealed that both groups (UV, without UV) exert irreversible DNA damage resulting in a cell death. CONCLUSIONS: Our findings suggest that even low concentrations (lower than 0.0464% v/v) of orange oil can be considered as phototoxic (PIF value 8.2) and probably phototoxic for bergamot oil (PIF value 4.6). We also found significant changes in the cell viability, the ROS production and the DNA after the cells were exposed to the tested chemicals. Even though these substances are widely used as antioxidants it should be noted that they present a risk factor and their use in cosmetic and food products should be minimized.

Genotoxicity of wastewater from health care facilities.

Health care facilities use for therapeutic purposes, diagnostics, research, and disinfection a high number of chemical compounds, such as pharmaceuticals (e.g. antibiotics, cytostatics, antidepressants), disinfectants, surfactants, metals, radioactive elements, bleach preparations, etc. Hospitals consume significant amounts of water (in the range of 400 to 1200 liters/day/bed) corresponding to the amount of wastewater discharge. Some of these chemicals are not eliminated in wastewater treatment plants and are the source of pollution for surface and groundwater supplies. Hospital wastewater represents chemical and biological risks for public and environmental health as many of these compounds might be genotoxic and are suspected to contribute to the increased incidence of cancer observed during the last decades. The changes of the genetic information can have a lethal effect, but more often cause tumor processes or mutations in embryonic development causing serious defects. A review of the available literature on the mutagenicity/genotoxicity of medical facilities wastewater is presented in this article.

Alternative methods in vitro for screening of endocrine disruptors.

OBJECTIVES: The aim of this study was to compare in silico data with results obtained in two alternative in vitro methods; and to investigate the potential endocrine activity of bisphenol A analogues. This article contributes to recent findings and brings up-to-date information on development of EU legislation and in vitro testing methods of endocrine disruption. METHODS: In silico approach based on the OECD QSAR Toolbox was used for prediction of potential ligands of human estrogen receptor α. Estrogen Receptor Transactivation in vitro Assay to Detect Estrogen Receptor Agonists and Antagonists (OECD TG 455/457) using the VM7Luc4E2 (formerly designated BG1Luc4E2) cell line was performed for measurement of transactivation activity of the tested substances. Commercially available yeast-based microplate assay (XenoScreen YES/YAS, Xenometrix, Switzerland) for detection of compounds with estrogenic and androgenic agonistic/antagonistic activity was used as a comparative test to estrogen receptor transactivation assay (OECD TG 455/457) and for screening of the agonistic/antagonistic potential of human estrogen receptor and agonistic/antagonistic activity of tested compounds on human androgen receptor. RESULTS: The study showed good correlation between the two in vitro assays and significant correlation with in silico data. All tested substances were identified as agonists for human estrogen receptor α by methods in silico and in vitro, four substances showed a potentially higher estrogenic activity comparing to bisphenol A, two substances were identified as very weak antagonists of human androgen receptor and one compound showed a potential of agonistic activity to human androgen receptor. CONCLUSIONS: The study contributes to recent findings and brings new in silico and in vitro data of bisphenol A analogues, revealing that these analogous substances should be further tested as they may show similar or higher activity in vivo comparing to bisphenol A, which has been recently legislatively regulated.

Reprint of: Cytotoxicity, cell uptake and microscopic analysis of titanium dioxide and silver nanoparticles in vitro.

Commercially manufactured nanomaterials are used massively for modification of products of everyday use, including products intended for children. Therefore their potential risks have to be ultimately studied. Aside from toxicity of nanomaterials with known specific parameters, the end-consumer is potentially endangered by materials with unknown specification. Commercially available products are not usually accompanied by parameter/specification sheet providing the consumer with sufficient chemico-physical parameters allowing the evaluation of possible toxic effects. The aim of this work was to evaluate the declared parameters of commercially available TiO2 and Ag NPs employing chemico-physical methods and consequently in vitro cytotoxicity and genotoxicity tests performed on non-cancer cell lines. Based on the results of our complex study we can conclude that the data provided by the producers are not in good agreement with the performed measurements. Furthermore, all tested NPs penetrated into the SVK14 cells and all NPs had significant effect on the kinetics of ROS production in all cell lines (note: the ROS production has not been established as the major mechanism of cell damage elicited by Ag NPs). The study revealed greater cytotoxic potential of Ag NPs in comparison with TiO2 NPs and all of the studied NPs caused significant DNA damage.

Characteristics of silver nanoparticles in vehicles for biological applications.

Silver nanoparticles (AgNPs) have been used for decades as anti-bacterial agents in various industrial fields such as cosmetics, health industry, food storage, textile coatings and environmental applications, although their toxicity is not fully recognized yet. Antimicrobial and catalytic activity of AgNPs depends on their size as well as structure, shape, size distribution, and physico-chemical environment. The unique properties of AgNPs require novel or modified toxicological methods for evaluation of their toxic potential combined with robust analytical methods for characterization of nanoparticles applied in relevant vehicles, e.g., culture medium with/without serum and phosphate buffered saline.

Cytotoxicity, cell uptake and microscopic analysis of titanium dioxide and silver nanoparticles in vitro.

Commercially manufactured nanomaterials are used massively for modification of products of everyday use, including products intended for children. Therefore their potential risks have to be ultimately studied. Aside from toxicity of nanomaterials with known specific parameters, the end-consumer is potentially endangered by materials with unknown specification. Commercially available products are not usually accompanied by parameter/specification sheet providing the consumer with sufficient chemico-physical parameters allowing the evaluation of possible toxic effects. The aim of this work was to evaluate the declared parameters of commercially available TiO2 and Ag NPs employing chemico-physical methods and consequently in vitro cytotoxicity and genotoxicity tests performed on non-cancer cell lines. Based on the results of our complex study we can conclude that the data provided by the producers are not in good agreement with the performed measurements. Furthermore, all tested NPs penetrated into the SVK14 cells and all NPs had significant effect on the kinetics of ROS production in all cell lines (note: the ROS production has not been established as the major mechanism of cell damage elicited by Ag NPs). The study revealed greater cytotoxic potential of Ag NPs in comparison with TiO2 NPs and all of the studied NPs caused significant DNA damage.