Multiplexed digital holography for fluid surface profilometry.

Digital holography (DH) has been widely used for imaging and characterization of microstructures and nanostructures in materials science and biology and also has the potential to provide high-resolution, nondestructive measurement of fluid surfaces. DH setups capture the complex wavefronts of light scattered by an object or reflected from a surface, allowing the quantitative measurements of their shape and deformation. However, their use in fluid profilometry is scarce and has not been explored in much depth to the best of our knowledge. We present an alternative use for a DH setup that can measure and monitor the surface of fluid samples. Based on DH reflectometry, our modeling shows that multiple reflections from the sample and the reference interfere and generate multiple holograms of the sample, resulting in a multiplexed image of the wavefront. The individual interferograms can be isolated in the spatial frequency domain, and the fluid surface can be digitally reconstructed from them. We further show that this setup can be used to track changes in the surface of a fluid over time, such as during the formation and propagation of waves or the evaporation of surface layers.

Large non-thermal contribution to picosecond strain pulse generation using the photo-induced phase transition in VO2.

Picosecond strain pulses are a versatile tool for investigation of mechanical properties of meso- and nano-scale objects with high temporal and spatial resolutions. Generation of such pulses is traditionally realized via ultrafast laser excitation of a light-to-strain transducer involving thermoelastic, deformation potential, or inverse piezoelectric effects. These approaches unavoidably lead to heat dissipation and a temperature rise, which can modify delicate specimens, like biological tissues, and ultimately destroy the transducer itself limiting the amplitude of generated picosecond strain. Here we propose a non-thermal mechanism for generating picosecond strain pulses via ultrafast photo-induced first-order phase transitions (PIPTs). We perform experiments on vanadium dioxide VO2 films, which exhibit a first-order PIPT accompanied by a lattice change. We demonstrate that during femtosecond optical excitation of VO2 the PIPT alone contributes to ultrafast expansion of this material as large as 0.45%, which is not accompanied by heat dissipation, and, for excitation density of 8 mJ cm-2, exceeds the contribution from thermoelastic effect by a factor of five.

Heterodyne mixing of millimetre electromagnetic waves and sub-THz sound in a semiconductor device.

We demonstrate heterodyne mixing of a 94 GHz millimetre wave photonic signal, supplied by a Gunn diode oscillator, with coherent acoustic waves of frequency ~100 GHz, generated by pulsed laser excitation of a semiconductor surface. The mixing takes place in a millimetre wave Schottky diode, and the intermediate frequency electrical signal is in the 1-12 GHz range. The mixing process preserves all the spectral content in the acoustic signal that falls within the intermediate frequency bandwidth. Therefore this technique may find application in high-frequency acoustic spectroscopy measurements, exploiting the nanometre wavelength of sub-THz sound. The result also points the way to exploiting acoustoelectric effects in photonic devices working at sub-THz and THz frequencies, which could provide functionalities at these frequencies, e.g. acoustic wave filtering, that are currently in widespread use at lower (GHz) frequencies.

Nanomechanical probing of the layer/substrate interface of an exfoliated InSe sheet on sapphire.

Van der Waals (vdW) layered crystals and heterostructures have attracted substantial interest for potential applications in a wide range of emerging technologies. An important, but often overlooked, consideration in the development of implementable devices is phonon transport through the structure interfaces. Here we report on the interface properties of exfoliated InSe on a sapphire substrate. We use a picosecond acoustic technique to probe the phonon resonances in the InSe vdW layered crystal. Analysis of the nanomechanics indicates that the InSe is mechanically decoupled from the substrate and thus presents an elastically imperfect interface. A high degree of phonon isolation at the interface points toward applications in thermoelectric devices, or the inclusion of an acoustic transition layer in device design. These findings demonstrate basic properties of layered structures and so illustrate the usefulness of nanomechanical probing in nanolayer/nanolayer or nanolayer/substrate interface tuning in vdW heterostructures.

Coherent Acoustic Phonons in Colloidal Semiconductor Nanocrystal Superlattices.

The phonon properties of films fabricated from colloidal semiconductor nanocrystals play a major role in thermal conductance and electron scattering, which govern the principles for building colloidal-based electronics and optics including thermoelectric devices with a high ZT factor. The key point in understanding the phonon properties is to obtain the strength of the elastic bonds formed by organic ligands connecting the individual nanocrystallites. In the case of very weak bonding, the ligands become the bottleneck for phonon transport between infinitively rigid nanocrystals. In the opposite case of strong bonding, the colloids cannot be considered as infinitively rigid beads and the distortion of the superlattice caused by phonons includes the distortion of the colloids themselves. We use the picosecond acoustics technique to study the acoustic coherent phonons in superlattices of nanometer crystalline CdSe colloids. We observe the quantization of phonons with frequencies up to 30 GHz. The frequencies of quantized phonons depend on the thickness of the colloidal films and possess linear phonon dispersion. The measured speed of sound and corresponding wave modulus in the colloidal films point on the strong elastic coupling provided by organic ligands between colloidal nanocrystals.

Coherent phonon optics in a chip with an electrically controlled active device.

Phonon optics concerns operations with high-frequency acoustic waves in solid media in a similar way to how traditional optics operates with the light beams (i.e. photons). Phonon optics experiments with coherent terahertz and sub-terahertz phonons promise a revolution in various technical applications related to high-frequency acoustics, imaging, and heat transport. Previously, phonon optics used passive methods for manipulations with propagating phonon beams that did not enable their external control. Here we fabricate a phononic chip, which includes a generator of coherent monochromatic phonons with frequency 378 GHz, a sensitive coherent phonon detector, and an active layer: a doped semiconductor superlattice, with electrical contacts, inserted into the phonon propagation path. In the experiments, we demonstrate the modulation of the coherent phonon flux by an external electrical bias applied to the active layer. Phonon optics using external control broadens the spectrum of prospective applications of phononics on the nanometer scale.