Functional Activity of Enantiomeric Oximes and Diastereomeric Amines and Cyano Substituents at C9 in 3-Hydroxy-N-phenethyl-5-phenylmorphans.

The synthesis of stereochemically pure oximes, amines, saturated and unsaturated cyanomethyl compounds, and methylaminomethyl compounds at the C9 position in 3-hydroxy-N-phenethyl-5-phenylmorphans provided µ-opioid receptor (MOR) agonists with varied efficacy and potency. One of the most interesting compounds, (2-((1S,5R,9R)-5-(3-hydroxyphenyl)-2-phenethyl-2-azabicyclo[3.3.1]nonan-9-yl)acetonitrile), was found to be a potent partial MOR agonist (EC50 = 2.5 nM, %Emax = 89.6%), as determined in the forskolin-induced cAMP accumulation assay. Others ranged in potency and efficacy at the MOR, from nanomolar potency with a C9 cyanomethyl compound (EC50 = 0.85 nM) to its totally inactive diastereomer, and three compounds exhibited weak MOR antagonist activity (the primary amine 3, the secondary amine 8, and the cyanomethyl compound 41). Many of the compounds were fully efficacious; their efficacy and potency were affected by both the stereochemistry of the molecule and the specific C9 substituent. Most of the MOR agonists were selective in their receptor interactions, and only a few had δ-opioid receptor (DOR) or κ-opioid receptor (KOR) agonist activity. Only one compound, a C9-methylaminomethyl-substituted phenylmorphan, was moderately potent and fully efficacious as a KOR agonist (KOR EC50 = 18 nM (% Emax = 103%)).

Design, Synthesis, and Structure-Activity Relationship Studies of Novel GPR88 Agonists (4-Substituted-phenyl)acetamides Based on the Reversed Amide Scaffold.

The development of synthetic agonists for the orphan receptor GPR88 has recently attracted significant interest, given the promise of GPR88 as a novel drug target for psychiatric and neurodegenerative disorders. Examination of structure-activity relationships of two known agonist scaffolds 2-PCCA and 2-AMPP, as well as the recently resolved cryo-EM structure of 2-PCCA-bound GPR88, led to the design of a new scaffold based on the "reversed amide" strategy of 2-AMPP. A series of novel (4-substituted-phenyl)acetamides were synthesized and assessed in cAMP accumulation assays as GPR88 agonists, which led to the discovery of several compounds with better or comparable potencies to 2-AMPP. Computational docking studies suggest that these novel GPR88 agonists bind to the same allosteric site of GPR88 that 2-PCCA occupies. Collectively, our findings provide structural insight and SAR requirement at the allosteric site of GPR88 and a new scaffold for further development of GPR88 allosteric agonists.

Potent MOR Agonists from 2'-Hydroxy-5,9-dimethyl-N-phenethyl Substituted-6,7-benzomorphans and from C8-Hydroxy, Methylene and Methyl Derivatives of N-Phenethylnormetazocine.

(-)-5,9-Dimethyl-6,7-benzomorphan (normetazocine) derivatives with a para-OH or ortho-F substituent in the aromatic ring of the N-phenethyl moiety were synthesized and found to have subnanomolar potency at MOR, and both were fully efficacious in vitro. These new compounds, (1R,5R,9R)-6,11-dimethyl-3-(2-fluorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol and (1R,5R,9R)-6,11-dimethyl-3-(4-hydroxyphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol, were more potent than the unsubstituted compound N-phenethylnormetazocine and about 30 or 40 times more potent than morphine, respectively. A variety of substituents in the ortho, meta, or para position in the aromatic ring of the N-phenethyl moiety were synthesized, 25 of these compounds, and found to have varying effects on potency and efficacy as determined by the forskolin-induced cAMP accumulation assay. The N-phenethyl moiety was also modified by increasing chain length to form a N-phenylpropyl side chain with and without a para-nitro moiety, and by an N-cinnamyl side chain. Also, an indole ethylamine normetazocine was synthesized to replace the N-phenethylamine side chain in normetazocine. The phenylpropylamine, propenylamine (cinnamyl) and the para-nitropropylamine had little or no MOR potency. The indole-ethylamine on the normetazocine nucleus, however, had moderate potency (MOR EC50 = 12 nM), and was fully efficacious (%Emax = 102%) in the cAMP assay. Retention of the N-phenethyl moiety and the addition of alkyl and alkenyl moieties on C8 in (-)-N-phenethylnormetazocine gave a C8-methylene derivative that had subnanomolar potency at MOR and a C8-methyl analog that had nanomolar potency. Five C8-substituted compounds were synthesized.

Discovery of a Potent Highly Biased MOR Partial Agonist among Diastereomeric C9-Hydroxyalkyl-5-phenylmorphans.

All possible diastereomeric C9-hydroxymethyl-, hydroxyethyl-, and hydroxypropyl-substituted 5-phenylmorphans were synthesized to explore the three-dimensional space around the C9 substituent in our search for potent MOR partial agonists. These compounds were designed to lessen the lipophilicity observed with their C9-alkenyl substituted relatives. Many of the 12 diastereomers that were obtained were found to have nanomolar or subnanomolar potency in the forskolin-induced cAMP accumulation assay. Almost all these potent compounds were fully efficacious, and three of those chosen for in vivo evaluation, 15, 21, and 36, were all extremely G-protein biased; none of the three compounds recruited beta-arrestin2. Only one of the 12 diastereomers, 21 (3-((1S,5R,9R)-9-(2-hydroxyethyl)-2-phenethyl-2-azabicyclo[3.3.1]nonan-5-yl)phenol), was a MOR partial agonist with good, but not full, efficacy (Emax = 85%) and subnanomolar potency (EC50 = 0.91 nM) in the cAMP assay. It did not have any KOR agonist activity. This compound was unlike morphine in that it had a limited ventilatory effect in vivo. The activity of 21 could be related to one or more of three well-known theories that attempt to predict a dissociation of the desired analgesia from the undesirable opioid-like side-effects associated with clinically used opioids. In accordance with the theories, 21 was a potent MOR partial agonist, it was highly G-protein biased and did not attract beta-arrestin2, and it was found to have both MOR and DOR agonist activity. All the other diastereomers that were synthesized were either much less potent than 21 or had either too little or too much efficacy for our purposes. It was also noted that a C9-methoxymethyl compound with 1R,5S,9R stereochemistry (41) was more potent than the comparable C9-hydroxymethyl compound 11 (EC50 = 0.65 nM for 41 vs. 2.05 nM for 11). Both 41 and 11 were fully efficacious.

Room-Temperature Postannealing Reduction via Aqueous Sodium Borohydride and Composition Optimization of Fully Solution-Processed Indium Tin Oxide Films.

Solution-processed transparent conductive oxides offer the advantages of low-cost, high-throughput fabrication of electronic devices compared to the specific requirements of vacuum deposition techniques. However, adapting the current state of the art to ink deposition calls for optimization of the precursor ink composition and the postdeposition process. Solution processing of indium tin oxide films can be accomplished at reduced temperatures (250-400 °C) by annealing soluble precursor metal salts together with a fuel/oxidizer, causing an exothermic reaction with elevated local temperatures. Following layer-by-layer cycles of deposition and annealing, a postprocessing step is required via heating (300 °C) under a 5% H2 reducing atmosphere. To address the discrepancy between the versatility of ink deposition and the limitations of controlled atmosphere postprocessing, here we investigate the effects of postprocess dipping in aqueous sodium borohydride at room temperature as an alternative, which allows for a completely solution-based process from ink to film. In addition to postprocessing, the solution composition was also optimized by removing the fuel additive and by adjusting the In/Sn content. Indium tin oxide (ITO) films were spin-coated and annealed in air at 250, 300, and 400 °C and characterized by UV/vis spectroscopy to obtain optical transmittance, atomic force microscopy to obtain film thickness and surface morphology, and a Hall effect system for electrical parameters. Additional data from X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) indicate that crystallinity is affected by the reducing environment. Results revealed an order-of-magnitude improvement of the Haacke figure of merit (FOM) from 4.3 × 10-4 Ω-1, 382 Ω/□ sheet resistance (Rs), and 84% transmittance (%T) for the traditional 9:1 In/Sn precursor ink with fuel additive followed by 300 °C of 5% H2-furnace post-treatment compared to that of the optimized fully solution-processed 8.5:1.5 In/Sn ink without fuel followed by an ambient air at 25 °C dipping in aqueous sodium borohydride, leading to 3.0 × 10-3 Ω-1 FOM, 84.5 Ω/□ Rs, and 87%T including the glass substrate.

Examination of Jeltrate Plus as a tissue equivalent bolus material.

A product available commercially for making dental impressions, Jeltrate Plus, was evaluated as a tissue equivalent bolus material. Jeltrate Plus was found to be tissue equivalent in 6 and 15 MV photon energy beams and 6, 12, and 20 MeV electron energy beams. As a first step, different preparations for making the bolus material were investigated and an optimal mixture was determined to be two parts Jeltrate Plus powder to three parts water by weight. A suitable method for storing the material was found to be in a water filled plastic container. Since the product is fairly inexpensive and is easily and quickly made and moulded into different shapes, it is an excellent bolus material to use when treating irregular patient contours.