Hollow Filaments from Coaxial Dry-Jet Wet Spinning of a Cellulose Solution in an Ionic Liquid: Wet-Strength and Water Interactions.

Hollow tubing and tubular filaments are highly relevant to membrane technologies, vascular tissue engineering, and others. In this context, we introduce hollow filaments (HF) produced through coaxial dry-jet wet spinning of cellulose dissolved in an ionic liquid ([emim][OAc]). The HF, developed upon regeneration in water (23 °C), displays superior mechanical performance (168 MPa stiffness and 60% stretchability) compared to biobased counterparts, such as those based on collagen. The results are rationalized by the effects of crystallinity, polymer orientation, and other factors associated with rheology, thermal stability, and dynamic vapor sorption. The tensile strength and strain of the HF (dry and wet) are enhanced by drying and wetting cycles (water vapor sorption and desorption experiments). Overall, we unveil the role of water molecules in the wet performance of HF produced by cellulose regeneration from [emim][OAc], which offers a basis for selecting suitable applications.

Wood-based superblack.

Light is a powerful and sustainable resource, but it can be detrimental to the performance and longevity of optical devices. Materials with near-zero light reflectance, i.e. superblack materials, are sought to improve the performance of several light-centered technologies. Here we report a simple top-down strategy, guided by computational methods, to develop robust superblack materials following metal-free wood delignification and carbonization (1500 °C). Subwavelength severed cells evolve under shrinkage stresses, yielding vertically aligned carbon microfiber arrays with a thickness of ~100 µm and light reflectance as low as 0.36% and independent of the incidence angle. The formation of such structures is rationalized based on delignification method, lignin content, carbonization temperature and wood density. Moreover, our measurements indicate a laser beam reflectivity lower than commercial light stoppers in current use. Overall, the wood-based superblack material is introduced as a mechanically robust surrogate for microfabricated carbon nanotube arrays.

Cannabis detection with solid sensors and paper-based immunoassays by conjugating antibodies to nanocellulose.

Highly sensitive and specific diagnostics for cannabis usage are essential for rapid on-site screening for illicit drug usage. To improve the sensitivity of THC immunoassays, a proper immobilization of the sensing elements on the sensor substrate is critical. In this work, we demonstrated the utilization of EDC/NHS coupling chemistry with nanocellulose to obtain efficient anchor layers for the immobilization of anti-immune complex antibodies on surfaces. In our approach, the high surface-to-volume ratio, OH-group-rich surface, and high hygroscopicity of TOCNF enable efficient surface functionalization and enhance water permeation inside the nanocellulose network structure, offering a hydrophilic spacer for the sensing antibodies. THC detection was shown in both SPR (surface plasmon resonance technique) and paper-based sensing systems. In SPR, antibody immobilization and the related interactions with the target molecule complex with 1-10 µg/mL THC were followed in-situ in aqueous environment, revealing robust attachment of the antibody to the nanocellulose layer and preserved bioactivity. Additionally, quantitative THC detection was enabled on paper substrate by colorimetric means by employing labeled anti-THC Fab antibody fragments as detection antibodies. THC detection efficiency of covalently linked biointerface was superior compared to the performance of physically linked biointerface. The chemical conjugation of anti-IC to nanocellulose allowed efficient binding, whereas supramolecular conjugation led to insufficient binding, highlighting the relevance of the developed nanocellulose-based anchor layer.

Nanocellulose Removes the Need for Chemical Crosslinking in Tannin-Based Rigid Foams and Enhances Their Strength and Fire Retardancy.

Thermal insulation and fire protection are two of the most critical features affecting energy efficiency and safety in built environments. Together with the associated environmental footprint, there is a strong need to consider new insulation materials. Tannin rigid foams have been proposed as viable and sustainable alternatives to expanded polyurethanes, traditionally used in building enveloping. Tannin foams structure result from polymerization with furfuryl alcohol via self-expanding. We further introduce cellulose nanofibrils (CNFs) as a reinforcing agent that eliminates the need for chemical crosslinking during foam formation. CNF forms highly entangled and interconnected nanonetworks, at solid fractions as low as 0.1 wt %, enabling the formation of foams that are ca. 30% stronger and ca. 25% lighter compared to those produced with formaldehyde, currently known as one of the best performers in chemically coupling tannin and furfuryl alcohol. Compared to the those chemically crosslinked, our CNF-reinforced tannin foams display higher thermal degradation temperature (peak shifted upward, by 30-50 °C) and fire resistance (40% decrease in mass loss). Furthermore, we demonstrate partially hydrophobized CNF to tailor the foam microstructure and derived physical-mechanical properties. In sum, green and sustainable foams, stronger, lighter, and more resistant to fire are demonstrated compared to those produced by formaldehyde crosslinking.

Multilayers of Renewable Nanostructured Materials with High Oxygen and Water Vapor Barriers for Food Packaging.

Natural biopolymers have become key players in the preparation of biodegradable food packaging. However, biopolymers are typically highly hydrophilic, which imposes limitations in terms of barrier properties that are associated with water interactions. Here, we enhance the barrier properties of biobased packaging using multilayer designs, in which each layer displays a complementary barrier function. Oxygen, water vapor, and UV barriers were achieved using a stepwise assembly of cellulose nanofibers, biobased wax, and lignin particles supported by chitin nanofibers. We first engineered several designs containing CNFs and carnauba wax. Among them, we obtained low water vapor permeabilities in an assembly containing three layers, i.e., CNF/wax/CNF, in which wax was present as a continuous layer. We then incorporated a layer of lignin nanoparticles nucleated on chitin nanofibrils (LPChNF) to introduce a complete barrier against UV light, while maintaining film translucency. Our multilayer design which comprised CNF/wax/LPChNF enabled high oxygen (OTR of 3 ± 1 cm3/m2·day) and water vapor (WVTR of 6 ± 1 g/m2·day) barriers at 50% relative humidity. It was also effective against oil penetration. Oxygen permeability was controlled by the presence of tight networks of cellulose and chitin nanofibers, while water vapor diffusion through the assembly was regulated by the continuous wax layer. Lastly, we showcased our fully renewable packaging material for preservation of the texture of a commercial cracker (dry food). Our material showed functionality similar to that of the original packaging, which was composed of synthetic polymers.

Carboxymethyl Cellulose (CMC) Optical Fibers for Environment Sensing and Short-Range Optical Signal Transmission.

Optical fibers are a key component in modern photonics, where conventionally used polymer materials are derived from fossil-based resources, causing heavy greenhouse emissions and raising sustainability concerns. As a potential alternative, fibers derived from cellulose-based materials offer renewability, biocompatibility, and biodegradability. In the present work, we studied the potential of carboxymethyl cellulose (CMC) to prepare optical fibers with a core-only architecture. Wet-spun CMC hydrogel filaments were cross-linked using aluminum ions to fabricate optical fibers. The transmission spectra of fibers suggest that the light transmission window for cladding-free CMC fibers was in the range of 550-1350 nm, wherein the attenuation coefficient for CMC fibers was measured to be 1.6 dB·cm-1 at 637 nm. CMC optical fibers were successfully applied in touch sensing and respiratory rate monitoring. Finally, as a proof-of-concept, we demonstrate high-speed (150 Mbit/s) short-distance signal transmission using CMC fibers (at 1310 nm) in both air and water media. Our results establish the potential of carboxymethyl cellulose-based biocompatible optical fibers for highly demanding advanced sensor applications, such as in the biomedical domain.

Bicomponent Cellulose Fibrils and Minerals Afford Wicking Channels Stencil-Printed on Paper for Rapid and Reliable Fluidic Platforms.

Flexible and easy-to-use microfluidic systems are suitable options for point-of-care diagnostics. Here, we investigate liquid transport in fluidic channels produced by stencil printing on flexible substrates as a reproducible and scalable option for diagnostics and paper-based sensing. Optimal printability and flow profiles were obtained by combining minerals with cellulose fibrils of two different characteristic dimensions, in the nano- and microscales, forming channels with ideal wettability. Biomolecular ligands were easily added by inkjet printing on the channels, which were tested for the simultaneous detection of glucose and proteins. Accurate determination of clinically relevant concentrations was possible from linear calibration, confirming the potential of the introduced paper-based diagnostics. The results indicate the promise of simple but reliable fluidic channels for drug and chemical analyses, chromatographic separation, and quality control.

Cross-Linked and Surface-Modified Cellulose Acetate as a Cover Layer for Paper-Based Electrochromic Devices.

We studied the surface and microstructure of cellulose acetate (CA) films to tailor their barrier and mechanical properties for application in electrochromic devices (ECDs). Cross-linking of CA was carried out with pyromellitic dianhydride to enhance the properties relative to unmodified CA: solvent resistance (by 43% in acetone and 37% in DMSO), strength (by 91% for tensile at break), and barrier (by 65% to oxygen and 92% to water vapor). Surface modification via tetraethyl orthosilicate and octyltrichlorosilane endowed the films with hydrophobicity, stiffness, and further enhanced solvent resistance. A detailed comparison of structural, chemical, surface, and thermal properties was performed by using X-ray diffraction, dynamic mechanical analyses, Fourier-transform infrared spectroscopy, and atomic force microscopy. Coplanar ECDs were synthesized by incorporating a hydrogel electrolyte comprising TEMPO-oxidized cellulose nanofibrils and an ionic liquid. When applied as the top layer in the ECDs, cross-linked and hydrophobized CA films extended the functionality of the assembled displays. The results indicate excellent prospects for CA films in achieving environmental-friendly ECDs that can replace poly(ethylene terephthalate)-based counterparts.

High-Throughput Tailoring of Nanocellulose Films: From Complex Bio-Based Materials to Defined Multifunctional Architectures.

This paper demonstrates a high-throughput approach to fabricate nanocellulose films with multifunctional performance using conventionally existing unit operations. The approach comprises cast-coating and direct interfacial atmospheric plasma-assisted gas-phase modification along with the microscale patterning technique (nanoimprint lithography, NIL), all applied in roll-to-roll mode, to introduce organic functionalities in conjunction with structural manipulation. Our strategy results in multifunctional cellulose nanofibrils (CNF) films in which the high optical transmittance (∼90%) is retained while the haze can be adjusted (2-35%). Concomitantly, the hydrophobic/hydrophilic balance can be tuned (50-21 mJ/m2 with the water contact angle ranging from ∼20 up to ∼120°), while intrinsic hygroscopicity of CNF films is not significantly compromised. Therefore, a challenge to produce multifunctional bio-based materials with properties defined by various high-performance applications conjoined to the lack of efficient processing strategies is elucidated. Overall, economically and ecologically viable strategy, which was realized by facile and upscalable unit operations using the R2R technology, is introduced to expand the properties' spaces and thus offer a vast variety of interesting applications for CNF films.

Delignification and Ionic Liquid Treatment of Wood toward Multifunctional High-Performance Structural Materials.

Wood-based multifunctional materials with excellent mechanical performance are increasingly considered for sustainable advanced applications due to their unique hierarchical structure and inherent reinforcing cellulose phase orientation. Nonetheless, a wider multipurpose utilization of wood materials is so far hampered because of constraints arising from scalable functionalization, efficient processing, facile shaping as well asnatural heterogeneity and durability. This study introduces a multifunctional all-wood material fabrication method relying on delignification, ionic liquid (IL) treatment, and pressure-assisted consolidation of wood. Structure-retaining controlled delignification of wood was performed to enable direct access to the hierarchical cellulose assembly, while preserving the highly aligned and thus beneficial wood structural directionality. As a following step, the obtained biobased scaffold with an increased porosity was infiltrated with an IL and heat-activated to partially dissolve and soften the cellulose fiber surface. Samples washed with water to remove IL exhibited pronounced isotropic flexibility, which upon combined compression and lateral shear allowed the fabrication of various 3D shapes with adjustable fiber architecture. The obtained very compact and totally additive-free all-wood materials were extensively characterized, revealing superior mechanical performance, and gained multifunctionality compared to native wood.

Cogrinding Wood Fibers and Tannins: Surfactant Effects on the Interactions and Properties of Functional Films for Sustainable Packaging Materials.

We report on the combination of cellulose nanofibrils (CNFs) and condensed tannins from Acacia mearnsii for the development of hybrid, functional films. The tannins are fractionated and concentrated in polyphenolics that are used for functional components in the hybrid materials. Cogrinding of wood fibers with the tannins in aqueous media allows simultaneous fiber deconstruction and in situ binding of tannins on the freshly exposed cellulosic surfaces. Hence, a tightly bound bicomponent system is produced, which is otherwise not possible if typical adsorption protocols are followed, mainly due to the extensive hydration typical of CNFs. A nonionic surfactant is used to tailor the cellulose-tannin interactions. The proposed strategy not only enables the incorporation of tannins with CNFs but also endows a high and prolonged antioxidant effect of films formed by filtration. Compared to tannin-free films, those carrying tannins are considerably more hydrophobic. In addition, they show selective absorption of ultraviolet light while maintaining optical transparency in the visible range. The proposed simple protocol for incorporating tannins and surfactants with CNFs is suitable to produce functional materials. This is possible by understanding associated interfacial phenomena in the context of sustainable materials within the concept of the circular bioeconomy.

Soft cellulose II nanospheres: sol-gel behaviour, swelling and material synthesis.

High axial aspect crystalline nanomaterials have emerged as polymeric building blocks for the construction of supermaterials. In contrast to this form, amorphous nanospheres have remained largely untapped. This is especially peculiar in the context of material assembly, due to the wide range of opportunities they offer by virtue of their soft particle characteristics, high volume ratio at low solid content and their highly swollen and accessible structure. In the context of cellulose, these colloids represent a new field in the family of nanocelluloses. We report an organic solvent-free, heterogeneous and simple synthesis of spherical carboxylated nanoparticles bearing a distinctive, amorphous outer shell structure. The particle shape is evaluated by atomic force microscopy, cryo-transmission electron microscopy, dynamic light scattering and small-angle X-ray scattering. The soft shell structure of the particles and their responsiveness to ionic strength and pH are quantified by the combination of quartz-crystal microgravimetry and atomic force microscopy. Aqueous dispersions of the nanocolloids feature distinctive sol/gel behaviour: at solid content <2 wt% they behave as a low viscous liquid (sol state), whereas at higher concentrations the shells dominate the interparticle interactions, causing an exponential increase in viscosity, typical of a gel state (hydrogel). Gelation is reversible and can be triggered alternatively by protonation of the carboxylate groups under acidic conditions. Supercritical drying of the hydrogels yields a highly porous, isotropic aerogel composed of aggregated nanoparticles. In contrast, ambient drying results in an anisotropic, fully transparent film. These colloids will allow the study of the interaction between soft cellulose and rigid matter, and have high potential as toughening additives in composites. Furthermore, the amorphous nature of this new class of cellulose nanocolloids makes them attractive as support materials for catalysts and enzymes.

The effect of oxyalkylation and application of polymer dispersions on the thermoformability and extensibility of paper.

Wood fiber-based packaging materials, as renewable materials, have growing market potential due to their sustainability. A new breakthrough in cellulose-based packaging requires some improvement in the mechanical properties of paper. Bleached softwood kraft pulp was mechanically treated, in two stages, using high- and low-consistency refining, sequentially. Chemical treatment of pulp using the oxyalkylation method was applied to modify a portion of fiber material, especially the fiber surface, and its compatibility with polymer dispersions including one carbohydrate polymer. The results showed that the compatibility of the cellulosic fibers with some polymers could be improved with oxyalkylation. By adjusting mechanical and chemical treatments, and the thermoforming conditions, the formability of paper was improved, but simultaneously the strength and stiffness decreased. The results suggest that the formability of the paper is not a direct function of the extensibility of the applied polymer, but also depends on the fiber network structure and surface energy.

Layer-by-layer assembled hydrophobic coatings for cellulose nanofibril films and textiles, made of polylysine and natural wax particles.

Herein we present a simple method to render cellulosic materials highly hydrophobic while retaining their breathability and moisture buffering properties, thus allowing for their use as functional textiles. The surfaces are coated via layer-by-layer deposition of two natural components, cationic poly-l-lysine and anionic carnauba wax particles. The combination of multiscale roughness, open film structure, and low surface energy of wax colloids, resulted in long-lasting superhydrophobicity on cotton surface already after two bilayers. Atomic force microscopy, interference microscopy, scanning electron microscopy and X-ray photoelectron spectroscopy were used to decouple structural effects from changes in surface energy. Furthermore, the effect of thermal annealing on the coating was evaluated. The potential of this simple and green approach to enhance the use of natural cellulosic materials is discussed.

Protein Adsorption Tailors the Surface Energies and Compatibility between Polylactide and Cellulose Nanofibrils.

The state of dispersion and the interactions between a polymer and a filler in a nanocomposite crucially define its properties and performance. The affinity of polylactide (PLA) with vegetable and animal proteins (casein, gelatin, soy protein isolate, and hydrolysate) is investigated and their role as eco-friendly dispersants and compatibilizers of cellulose nanofibrils (CNF) is elucidated. The affinity of the proteins with PLA is determined by using sensograms acquired by electroacoustic (quartz crystal microgravimetry) and optical (surface plasmon resonance) techniques. The surface energy of PLA increases upon protein adsorption while the opposite effect is observed for CNF, under identical experimental conditions. A significant improvement in the thermodynamic work of adhesion for PLA/CNF systems is predicted by application of the denatured proteins at low concentrations (∼20% and ∼15% enhancement with soy protein and casein at pH 3 and pH 8, respectively). We offer a robust method to screen denatured proteins and to tailor the wettability and material compatibility in the synthesis of bionanocomposites based on CNF and PLA.

Effect of PEG-PDMAEMA Block Copolymer Architecture on Polyelectrolyte Complex Formation with Heparin.

Heparin is a naturally occurring polyelectrolyte consisting of a sulfated polysaccharide backbone. It is widely used as an anticoagulant during major surgical operations. However, the associated bleeding risks require rapid neutralization after the operation. The only clinically approved antidote for heparin is protamine sulfate, which is, however, ineffective against low molecular weight heparin and can cause severe adverse reactions in patients. In this study, the facile synthesis of cationic-neutral diblock copolymers and their effective heparin binding is presented. Poly(ethylene glycol)-poly(2-(dimethylamino)ethyl methacrylate) (PEG-PDMAEMA) block copolymers were synthesized in two steps via atom-transfer radical polymerization (ATRP) using PEG as a macroinitiator. Solution state binding between heparin and a range of PEG-PDMAEMA block copolymers and one homopolymer was studied with dynamic light scattering and methylene blue displacement assay. Also in vitro binding in plasma was studied by utilizing a chromogenic heparin anti-Xa assay. Additionally, quartz crystal microbalance and multiparametric surface plasmon resonance were used to study the surface adsorption kinetics of the polymers on a heparin layer. It was shown that the block copolymers and heparin form electrostatically bound complexes with varying colloidal properties, where the block lengths play a key role in controlling the heparin binding affinity, polyelectrolyte complex size and surface charge. With the optimized polymers (PEG114PDMAEMA52 and PEG114PDMAEMA100), heparin could be neutralized in a dose-dependent manner, and bound efficiently into small neutral complexes, with a hydrodynamic radius less than 100 nm. These complexes had only a limited effect on cell viability. Based on these studies, our approach paves the way for the development of new polymeric heparin binding agents.