Novel Approach to Landfill Wastewater Treatment Fouling Mitigation: Air Gap Membrane Distillation with Tin Sulfide-Coated PTFE Membrane.

This study addressed the fouling issue in membrane distillation (M.D.) technology, a promising method for water purification and wastewater reclamation. To enhance the anti-fouling properties of the M.D. membrane, a tin sulfide (TS) coating onto polytetrafluoroethylene (PTFE) was proposed and evaluated with air gap membrane distillation (AGMD) using landfill leachate wastewater at high recovery rates (80% and 90%). The presence of TS on the membrane surface was confirmed using various techniques, such as Field Emission Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared Spectroscopy (FT-IR), Energy Dispersive Spectroscopy (EDS), contact angle measurement, and porosity analysis. The results indicated the TS-PTFE membrane exhibited better anti-fouling properties than the pristine PTFE membrane, and its fouling factors (FFs) were 10.4-13.1% compared to 14.4-16.5% for the PTFE membrane. The fouling was attributed to pore blockage and cake formation of carbonous and nitrogenous compounds. The study also found that physical cleaning with deionized (DI) water effectively restored the water flux, with more than 97% recovered for the TS-PTFE membrane. Additionally, the TS-PTFE membrane showed better water flux and product quality at 55 °C and excellent stability in maintaining the contact angle over time compared to the PTFE membrane.

Fouling and Performance Investigation of Membrane Distillation at Elevated Recoveries for Seawater Desalination and Wastewater Reclamation.

This study reports on the impact of elevated recovery (i.e., 80%, 85%, and 90%) on the fouling and performance of air gap membrane distillation (AGMD) with real seawater and landfill leachate wastewater samples using polytetrafluoroethylene (PTFE) polymer membranes. Increasing the feed temperature from 55 °C to 65 °C improved the water flux of seawater and wastewater and shortened the operating time by 42.8% for all recoveries. The average water flux in the 80%, 85%, and 90% recovery experiments at the 65 °C feed temperature was 32%, 37.32%, and 36.7% higher than the case of 55 °C for the same recoveries. The water flux decline was more severe at a higher temperature and recovery. The highest flux decline was observed with a 90% recovery at 65 °C feed temperature, followed by an 85% recovery at 65 °C. Close examination of the foulants layer revealed that seawater formed a cake fouling layer made predominantly of metal oxides. In contrast, the landfill leachate fouling was a combination of pore blocking and cake formation, consisting mainly of carbonous and nitrogenous compounds. Physical cleaning with deionized (DI) water at 55 °C and 65 °C and chemical cleaning with hydrogen peroxide (H2O2) were investigated for their efficiency in removing membrane foulants. Analytical results revealed that seawater fouling caused membrane pore blockage while wastewater fouling formed a porous layer on the membrane surface. The results showed that membrane cleaning with hydrogen peroxide restored >97% of the water flux. Interestingly, the fouling factor in seawater tests was 10%, while it was 16% for the wastewater tests.

Microstructure evolution during nano-emulsification by NMR and microscopy.

HYPOTHESIS: Microstructure evolution in emulsions as a function of composition is of great interest but fundamentals have not yet been fully elucidated. Here, pulsed-field gradient (PFG) NMR diffusion measurements have been combined with confocal laser scanning microscopy (CLSM) to assess evolution of dynamics and microstructure during nano-emulsification. EXPERIMENTS: Diffusion coefficients of emulsions made of water, mineral oil and surfactants (Span 20 and Tween 80) were measured as a function of water composition and compared with the morphological features of the emulsions obtained by CLSM. FINDINGS: In the absence of water, two phases are visible from CLSM, and two diffusion components are observed with PFG NMR, a major fast component attributed to a continuous oil phase containing the more hydrophobic surfactant Span 20 with traces of Tween 80, and a minor slow component attributed to a dispersed phase of the more hydrophilic surfactant Tween 80 with traces of mineral oil and Span 20. At the inversion point (25 wt% water) the two-component diffusion behavior of the oil-rich phase is drastically reversed in terms of populations, with the slow diffusion process becoming dominant. This suggests a significant structuring of the oil-rich phase in the presence of surfactants enhanced by water, which can be explained by the formation of aggregates in the oil phase as reverse micelles or of a lamellar structure, and ties in well with the rheological measurements.

Patterns of prescribing hydroxyurea for sickle cell disease patients from a central hospital, Saudi Arabia.

Sickle cell disease (SCD) is a group of inherited disorders of hemoglobin synthesis. It is prevalent in different parts of the world, including the Kingdom of Saudi Arabia. The disease is associated with multiple acute and chronic life-threatening complications. Hydroxyurea (HU) is an effective preventive medication; its use has resulted in decreased morbidity and mortality. However, practice variability, including underutilization of HU, has been reported. No local publication has addressed this issue. The aim of this work is to consider the pattern of HU prescription for SCD patients. This is a retrospective study included patients seen in the outpatient clinics in a central hospital. Cases of medications unavailability or patient refusal to take the drug were not included. A total of 152 patients were included, of them 118 were prescribed HU and 34 were not. In 133 (87.5%) patients, the physician's decision was appropriate. Inappropriate decisions including both under prescription and, to much lesser extent, over utilization had been demonstrated in 19 (12.5%) cases. Impact of raising the healthcare providers' awareness and improving compliance with the updated SCD management recommendations and guidelines deserve further studying. In our local experience, although the majority of HU prescriptions were appropriate, both under prescription and to a lesser extent, overutilization was demonstrated.

Integrated In†Situ Characterization of a Molten Salt Catalyst Surface: Evidence of Sodium Peroxide and Hydroxyl Radical Formation.

Sodium-based catalysts (such as Na2 WO4 ) were proposed to selectively catalyze OH radical formation from H2 O and O2 at high temperatures. This reaction may proceed on molten salt state surfaces owing to the lower melting point of the used Na salts compared to the reaction temperature. This study provides direct evidence of the molten salt state of Na2 WO4 , which can form OH radicals, using in situ techniques including X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), laser induced fluorescence (LIF) spectrometry, and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). As a result, Na2 O2 species, which were hypothesized to be responsible for the formation of OH radicals, have been identified on the outer surfaces at temperatures of ≥800 °C, and these species are useful for various gas-phase hydrocarbon reactions, including the selective transformation of methane to ethane.

Nalidixic acid-resistant Salmonella enterica serotype typhi infection presenting with sub-intestinal obstruction and mesenteric adenitis.

Nalidixic acid-resistant Salmonella typhi NARST infections increase minimal inhibitory concentrations of fluoroquinolones, due to chromosomal mutations in the gene encoding DNA gyrase, and can lead to a delayed treatment response. This in turn alters the course of the disease allowing for a protracted period of illness and the occurrence of complications. In this case report, we present a patient from the Indian sub-continent, who was diagnosed with NARST complicated by sub-intestinal obstruction, her diagnosis, treatment, and subsequent recovery.