Synthesis, characterization and optical properties of polymer-based ZnS nanocomposites.

Nanostructured polymer-semiconductor hybrid materials such as ZnS-poly(vinyl alcohol) (ZnS-PVA), ZnS-starch and ZnS-hydroxypropylmethyl cellulose (Zns-HPMC) are synthesized by a facile aqueous route. The obtained nanocomposites are characterized using various techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), UV/vis spectroscopy and photoluminescence (PL). XRD studies confirm the zinc blende phase of the nanocomposites and indicate the high purity of the samples. SEM studies indicate small nanoparticles clinging to the surface of a bigger particle. The Energy Dispersive Analysis by X-rays (EDAX) spectrum reveals that the elemental composition of the nanocomposites consists primarily of Zn:S. FTIR studies indicate that the polymer matrix is closely associated with ZnS nanoparticles. The large number of hydroxyl groups in the polymer matrix facilitates the complexation of metal ions. The absorption spectra of the specimens show a blue shift in the absorption edge. The spectrum reveals an absorption edge at 320, 310 and 325 nm, respectively. PL of nanocomposites shows broad peaks in the violet-blue region (420-450 nm). The emission intensity changes with the nature of capping agent. The PL intensity of ZnS-HPMC nanocomposites is found to be highest among the studied nanocomposites. The results clearly indicate that hydroxyl-functionalized HPMC is much more effective at nucleating and stabilizing colloidal ZnS nanoparticles in aqueous suspensions compared with PVA and starch.

Influence of thiol capping on the photoluminescence properties of L-cysteine-, mercaptoethanol- and mercaptopropionic acid-capped ZnS nanoparticles.

Mercaptoethanol (ME), mercaptopropionic acid (MPA) and L-cysteine (L-Cys) having -SH functional groups were used as surface passivating agents for the wet chemical synthesis of ZnS nanoparticles. The effect of the thiol group on the optical and photoluminescence (PL) properties of ZnS nanoparticles was studied. L-Cysteine-capped ZnS nanoparticles showed the highest PL intensity among the studied capping agents, with a PL emission peak at 455 nm. The PL intensity was found to be dependent on the concentration of Zn(2+) and S(2-) precursors. The effect of buffer on the PL intensity of L-Cys-capped ZnS nanoparticles was also studied. UV/Vis spectra showed blue shifting of the absorption edge.

Effects of rare earth ions (Tb, Ce, Eu, Dy) on the thermoluminescence characteristics of sol-gel derived and γ-irradiated SiO2 nanoparticles.

Highly pure SiO2 and SiO2 :RE nanoparticles were synthesized by the sol-gel method. The morphological, structural and optical properties of the nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). XRD results indicate that all the samples studied were free from impurities. SEM/TEM results indicate that the samples were well dispersed. Surface characterization of the nanocrystals by Fourier transform infrared spectroscopy has been carried out and the structure of surface-bound SiO2 based on spectral analysis is proposed. Thermoluminescence (TL) characteristics were investigated to study the influence of rare earth dopants (Tb, Ce, Eu, Dy) on SiO2 matrix subjected to 0.5 kG (1 h) γ-irradiation. Among these rare earth elements, Eu(3+) was found to be the most efficient dopant for SiO2 showing maximum thermoluminescence intensity. SiO2 :Eu0.5 seems to be a promising candidate for use as a TL dosimeter.

Synthesis, characterization and optical studies of highly luminescent ZnS nanoparticles associated with hypromellose matrix as a green and novel stabilizer.

ZnS nanoparticles stabilized by a carbohydrate-based matrix, hypromellose (hydroxypropyl methylcellulose) were prepared via a wet chemical method. The nanocomposite was characterized by X-ray diffraction, transmission electon microscopy and Fourier transform infrared spectroscopy. X-Ray diffraction patterns revealed a zinc blende structure. Thermogravimetric analysis suggested that polymer attached to the surface decomposes at 700 °C. Absorption measurements were carried out and calculation of the diameter polydispersity index (DPI) suggests the formation of monodisperse nanoparticles. The optical properties of the as-prepared samples were studied by UV/vis spectroscopy and steady-state photoluminescence (PL) spectroscopy. The PL studies indicate the applicability of these nanoparticles as biocompatible sensors or luminescence markers in future.

Investigation on the chemiluminescence reaction of the phenylhydrazine-luminol-peroxide system.

We studied the chemiluminescence (CL) oxidation of phenyl hydrazine-luminol with various organic and inorganic peroxides. Maximum CL intensity for this system was obtained for t-butylhydroperoxide. The enhancement in CL depended strongly on pH and was greatest at pH 12.5. The solvent drastically enhanced the CL intensity. DMSO was found to increase the CL intensity many-fold as compared to acetonitrile and water. The effect of temperature on CL intensity has also been studied. The CL spectra revealed a broad peak at 425 nm, which suggests excited 3-aminophthalate ion as the luminophor. A mechanism to explain the reactions is suggested.

Mechanoluminescence properties of gamma-ray-irradiated BaSO4:Eu phosphors.

BaSO(4) activated with various concentrations of Eu were prepared by solid-state reaction technique. Thermoluminescence (TL) and mechanoluminescence (ML) of γ-ray-irradiated BaSO(4):Eu(2)O(3) phosphors were recorded. In the TL glow curve of the phosphor a single peak at 170°C was observed. The TL of the phosphors were also recorded after deforming the phosphors by dropping a piston of mass 0.4 kg onto them with different impact velocities. TL intensity (after deformation) decreased with increasing the impact velocity. In the ML intensity vs time curve two peaks were observed. ML intensity increased with increasing impact velocity of the piston and the time corresponding to peak ML intensity shifted to a shorter time value. ML intensity decreased drastically when it was recorded after annealing the sample at 170°C. The BaSO(4) phosphors activated with 0.1 mol% of Eu(2)O(3) showed optimum TL and ML. The photoluminescence emission spectrum of the sample showed that Eu enters as Eu(2+) ion in host lattice.

Compliance of Bhabhatron-II telecobalt unit with IEC standard - Radiation safety.

Bhabha Atomic Research Centre, Mumbai, India designed and developed a telecobalt unit, which was named as Bhabhatron-II. In this paper, the results pertaining to radiation safety of indigenously developed Bhabhatron-II telecobalt unit are reported. The various tests were carried out as per requirements of International Electrotechnical Commission standard and acceptance criteria developed nationally. Various devices such as CaSO4:Dy based thermoluminescent dosimeters, farmer type ionization chamber, water phantom and radiographic films were used. All the parameters pertaining to radiation leakage/transmission were within the tolerance limits as per IEC-60601-2-11 standard except the collimator transmission through X collimators (upper jaw), which marginally exceeds the tolerance limit.

Study on the response of indigenously developed CaSO4:Dy phosphor-based neutron dosemeter.

In the present paper, we report the indigenous development of a neutron-sensitive thermoluminescent dosemeter (TLD) based on CaSO4:Dy Teflon TL disc. The study includes indigenous development of a neutron dosemeter and its response in terms of operational quantity to different energies of neutrons under various irradiation conditions. It was found that the thermal neutron sensitivity of the CaSO4:Dy Teflon neutron disc is about one-third of TLD-600. However, the thermal neutron sensitivity with respect to CaSO4:Dy Teflon gamma disc is about 42 times for in-air irradiation and about 84 times for on-phantom irradiation condition. This newly developed neutron dosemeter can be used as a routine TLD with a slight change in the design of the TLD badge system in the mixed fields of gamma and neutrons of energy up to 500 keV for radiation workers engaged in nuclear fuel cycle operation and other applications.

Estimation of bremsstrahlung photon energy in the environment of high-energy electron accelerator using CaSO4:Dy based TL dosemeter.

High-energy bremsstrahlung X rays constitute the major radiation hazard to working personnel around the high-energy electron accelerators. Thermoluminescent (TL) dosemeter system based on CaSO4:Dy Teflon disc used in the routine individual monitoring was used to estimate the bremsstruhlung photon energy at different locations of the experimental hall of 450-MeV synchrotron accelerator. The response of TL discs under different filter regions of the dosemeter system undergo change with photon energy due to the lack of build up and interaction of photon in the metal filters. This change in the response of the discs used to estimate the energy of the bremsstrauhlung photon in conjunction with suitable calibration curve generated using known photon energy from medical linear accelerator. The photon energies estimated were in the range 1-4 MeV, depending on the locations.

Response of CaSO4:Dy based TL dosemeter system to high-energy photon beams: theoretical simulation.

Response of thermoluminescence (TL) discs under different filter regions of a CaSO(4):Dy based TL dosemeter system was simulated to high-energy photon beams in the energy range of 1.25 MeV to 24 MV ( approximately 9 MeV). This was done using FLUKA Monte Carlo code and also experimentally verified for some energy points. Response of disc D1 under metal filter combination was found to increase with photon energy, whereas that for the discs under polystyrene filter and open window regions of the dosemeter decreases continuously. The changes in the response of the discs under polystyrene filter and open window were attributed to the lack of build-up material. The increase in the response of disc D1 was due to the contribution from secondary electrons produced through Compton and pair production processes mainly arising out from the metal filter combination. The knowledge of the change in the response of individual discs and the ratio of discs' responses under different filter regions of the dosemeter system could be used for the measurement of energy of bremsstrahlung radiation that exists in and around high-energy electron accelerator and could be used for accurate evaluation of personal dose equivalent in high-energy photon field.

Studies on the response of the TLD badge for high-energy photons.

Absorbed tissue dose measurements are carried out for high-energy photon beams using CaSO4:Dy thermo-luminescence dosemeter (TLD) badge and the results are also verified using ionisation chamber used in radiation therapy. The photon beams generated using linear accelerator at 6 and 18 MV photon beam energies have been used and the absorbed doses are measured at the surface as well as at various depths. It has been found that the depth at which maximum dose is delivered increases with the increase in photon energy and the depth of maximum absorbed dose in tissue occurs beyond 10 mm. It has also been found that the evaluation of the absorbed dose (or Hp(10) as well) using thermoluminescence readout of disc D1 clearly shows that the current TLD badge provides a reasonable estimate of the effective dose for photon fields from 6 to 18 MV linacs for anterior-posterior incidence. The paper also provides information regarding the misinterpretation of radiation pattern in multi-element/filter TLD badge.

Development of an algorithm for TLD badge system for dosimetry in the field of X and gamma radiation in terms of Hp(10).

In view of the introduction of International Commission on Radiation Units and Measurements operational quantities Hp(10) and Hp(0.07), defined for individual monitoring, it became necessary to develop an algorithm that gives direct response of the dosemeter in terms of the operational quantities. Hence, for this purpose and also to improve the accuracy in dose estimation especially in the mixed fields of X ray and gamma, an algorithm was developed based on higher-order polynomial fit of the data points generated from the dose-response of discs under different filter regions of the present TL dosemeter system for known delivered doses. Study on the response of the BARC TL dosemeter system based on CaSO(4):Dy Teflon thermoluminescence dosemeter discs in the mixed fields of X and gamma radiation was carried out to ensure that the accuracies are within the prescribed limits recommended by the international organisations. The prevalent algorithm, based on the ratios of the disc response under various filters regions of the dosemeter to pure photons, was tested for different proportion of two radiations in case of mixed field dosimetry. It was found that the accuracy for few fields is beyond the acceptable limit in case of prevalent algorithm. The new proposed algorithm was also tested in mixed fields of photon fields and to pure photon fields of varied angles. It was found that the response of the dosemeter in mixed fields of photons and its angular response are satisfactory. The new algorithm can be used to record and report the personal dose in terms of Hp(10) as per the international recommendation for the present TL dosemeter.

Deformation luminescence produced during application and release of pressure on to gamma-irradiated CaF2:RE crystals.

Calcium fluoride CaF2 is an interesting host lattice for rare earth (RE) activators. CaF2 crystals doped with different concentrations of Dy, Ce, Er and Gd have been grown by the Bridgman technique and their deformation luminescence (DL) induced by room temperature gamma irradiation has been recorded. When a uniaxial pressure is applied on to gamma-irradiated CaF2:RE crystals, initially the DL intensity increases with time, attains a maximum value and then it decreases with time. Although the DL intensity produced during the release of pressure is less, its rise and decay behaviours are similar to that obtained during the application of pressure. The DL intensity depends on dopant, concentration of dopant, irradiation doses and mass of the load or applied pressure. It is suggested that the moving dislocation produced during deformation of crystals capture holes from hole trapped centres (like perturbed Vk centre) and the subsequent radiative recombination of the dislocation holes with electrons give rise to DL.

Correlation between thermoluminescence and mechanoluminescence of gamma-irradiated Dy activated potassium and magnesium mixed sulphate.

Thermoluminescene (TL) and mechanoluminescence (ML) properties of gamma-irradiated Dy activated potassium and magnesium mixed sulphate have been studied. (K2Mg2:Dy) (SO4)3 samples having different concentrations of Dy were prepared by solid-state diffusion method. Two distinct peaks, the first approximately 130 degrees C and the second approximately 273 degrees C, are observed in the TL glow curve. It is also observed that TL intensities of both peaks decrease when TL glow curves were recorded after deforming the irradiated samples. Only one peak is observed in the ML intensity vs. time curve and the ML intensity decreases markedly with the post-irradiation annealing (to remove 130 degrees C TL peak) of the sample. Both ML and TL intensities have been observed optimum for 1 mol% of Dy in the mixed sulphate system. It is suggested that the recombination of electrons with the free radicals (anion radicals produced by gamma irradiation) released from the traps during the thermal or mechanical excitation is responsible for luminescence in this system.

Correlation of phase transition with the change in TL characteristics in CaSO4:Dy phosphor--effect of thermal treatment.

The study is aimed at optimising the glow curve structure of CaSO4:Dy phosphor for dosimetric purpose and also to understand the observed changes owing to thermal treatment in the thermoluminescence (TL) sensitivity and glow curve structure. The reversible changes in the intensities of the lower temperature satellite peak and the main dosimetric glow peak with temperature of thermal treatment in the temperature range 400-700 degrees C indicates the interconversion of defect complexes responsible for the glow peaks in CaSO4:Dy. Phosphor samples subjected to thermal treatment in temperature range beyond 800 degrees C, showed irreversible changes in the intensities of the lower temperature and dosimetric peaks. The changes in TL characteristics of the phosphor for thermal treatments >800 degrees C are attributed to the partial phase transition in the phosphor as confirmed by the XRD and TG/DTA analysis of the phosphor.

Indoor radon concentration in the rural dwellings of Chhattisgarh state (India).

Inhalation of radon and its daughter products is the major contributor to the total exposure of the population to natural radiation. An indoor radon survey has been carried out in the state of Chhattisgarh (80.26 degrees N to 84.41 degrees N and 17.8 degrees E to 24.1 degrees E), India under the national coordinated radon project of the Department of Atomic Energy. In the frame of this project indoor radon concentration has been measured in 105 dwellings situated in different villages of Chhattisgarh state. Houses were selected for measurements to cover the most common type of houses generally existing in the rural areas. Measurements have been done on quarterly integrating cycle for one full year in each dwelling using radon cup dosemeter employing LR-115, type-II (pelliculable), solid-state nuclear track detectors. The gamma radiation level was also checked in each dwelling using a gamma survey meter. It was found that the annual average indoor radon concentration in these dwellings varies from 9.91 to 87.84 Bq m(-3) with overall mean value of 26.48 Bq m(-3). Gamma level in these rural dwellings varies from 14.84 to 26.56 microR h(-1) with mean value of 18.68 microR h(-1). We observed that the radon concentration is relatively higher in the houses where the floor is bare but relatively lower in those houses where the floor is tiled or cemented.

Studies on automatic hot gas reader used in the countrywide personnel monitoring programme.

In India, approximately 58,000 radiation workers are monitored using locally made CaSO4:Dy teflon embedded thermoluminescence dosemeter (TLD) badge system. The automatic hot gas readers developed locally are also used in TL measurements. The hot gas reader system has many advantages over the manual readers used previously and has completely replaced the manual reader system in all TLD personnel monitoring units in India. In the present study, the new reader system is studied and a theoretical attempt has been made to interpret the experimentally obtained results. The glow curves are generated theoretically and are also plotted experimentally. It has been found that the heat capacity of the heating gas, which is responsible for the transfer of heat, has a role in deciding the position of peak and is verified experimentally using different gas flow rates of nitrogen and argon as heating gases in the reader. The theoretical study may also be helpful in fitting the experimentally obtained glow curves and, therefore, the elimination of unwanted non-radiation-induced contributions, such as dark current, electronic spikes, light leakage and triboluminescence that generally distort the glow curve shape, can be achieved.

Mechano and thermoluminescence of gamma-irradiated CaSO4:Dy phosphor.

In order to have a better idea of the interaction of the defect centres produced by y-irradiation with dislocation in the processes of deformation destruction, mechanoluminescence (ML) and thermoluminescence (TL) of gamma-irradiated CaSO4:Dy, these phosphors have been investigated. CaSO4:Dy phosphors were prepared by dissolving CaSO4.2H2O in sulphuric acid and evaporating the excess acid around 300 degrees C. ML was excited impulsively by dropping a load on to the sample. Two peaks have been observed in the ML intensity against time curve. The total light output, i.e. integrated ML intensity, increases with concentration of dopant, strain rate and with irradiation doses. The TL glow curves of CaSO4:Dy phosphors at different concentrations of dopant and irradiation doses were also recorded. Studies of the influence of post-irradiation annealing on the ML of CaSO4:Dy show that with the removal of the TL dosemetric peak (approximately 210 degrees C) the ML intensity decreases markedly. A spectroscopic study of ML and TL has also been carried out to elucidate the mechanism of ML. Correlation between ML and TL has also been found.

Direct in situ reverse transcriptase-polymerase chain reaction.

In situ hybridization has been used for localization of specific nucleic acid sequences at the cellular level despite providing relatively low-detection sensitivity. In situ reverse transcriptase-polymerase chain reactions (RT-PCR) enhance sensitivity and thus enable localization of low-abundance mRNA in a cell. However, the available methods are fraught with problems of nonspecific amplifications as a result of mispriming and/or amplification from partially digested residual genomic DNA in tissue. Herein, we demonstrate that nonspecific background amplification can be eliminated by pretreatment of samples with restriction enzymes before DNase I digestion. Primers tagged with a far-red shifted fluorescent dye such as Cy5 in PCR reactions allow identification of target mRNA by fluorescence microscopy. These novel modifications lead to increased specificity and rapid in situ detection of cellular mRNA and thus may be used for pathological diagnosis.

Antifertility effects of an LHRH agonist in male mice.

This study was designed to investigate the effects of repeated high doses of an LHRH agonist on Swiss porton mouse seminiferous epithelium. Seminiferous epithelium showed more pronounced degenerative effects at the higher dose (1000 micrograms/kg wt/day) of the drug, with arrest of spermatogenesis at all stages of differentiation; effects on spermatogenesis become more evident after pachytene spermatocyte stage. The decrease in the testis-specific enzyme LDH-X is accounted for by the decrease in the number of cells of gametogenic origin. Although complete azoospermia was not observed, acute inhibition of motility of spermatozoa may account for severely decreased fertility rates after mating. However, reduced fertility rates due to decreased libido as a consequence of diminished testosterone levels cannot be discounted.