RESUMO
The present investigation highlights the necessity of monitoring some basic physico-chemical water quality indicators and their phytotoxic effect using ecotoxicological bioassays such as "seed germination tests." The phytotoxicity of raw and treated vegetable oil refinery wastewater (VORW) using different treatment processes was assessed through some physiological responses (relative seed germination (RSG), seedling elongation, and germination index (GI)) using Lactuca sativa cultivar. Biotest results of different raw water samples revealed a noticeable correlation between the organic matter content and water phytotoxicity. In fact, VORW showed a very low RSG (17 ± 0.7 to -47 ± 0.58%) and high phytotoxic effects (GI < 50%). The use of coagulation/flocculation (CF) allowed a satisfactory phytotoxicity removal where RSG obtained ranged from 83 ± 1.58 to 90 ± 1.2%. However, the effluent still presents high to moderate phytotoxicity since GI remained below 80% which indicates the presence of toxic elements remaining after CF treatment. When VORW were treated using membrane processes, their phytotoxicity was gradually decreased with the decrease in the membrane pore size. The use of microfiltration membranes (MF), with pore size of 5 µm, 1.2 µm, 0.45 µm, and 0.22 µm, showed RSG values ranged from 37 ± 1.15 to 77 ± 1.68% and GI of less than 80% indicating a moderate to high phytotoxicity. However, the use of ultrafiltration (UF) membranes with molecular weight cut-off (MWCO) of 100 kDa, 30 kDa, and 10 kDa made it possible to achieve an RSG of 100% and an IG exceeding 80% showing that the VORW-treated using UF does not exhibit any phytotoxicity effect. Hence, UF appears to be the most efficient and environmentally friendly technology that could be used for safely treated VORW irrigation purposes compared to CF and MF processes.
RESUMO
The present paper investigates the efficiency of coagulation/flocculation process using aluminum sulfate as coagulant and CHT industrial flocculent as coagulant aid/flocculent in the treatment of vegetable oil refinery wastewater (VORW). The process optimization was conducted in two steps, jar test experiments for preliminary evaluation to identify the most influencing factors and response surface methodology using Box-Behnken design to investigate the effects of three major factors and their interactions. The variables involved were the coagulant concentration (X1), flocculent dosage (X2), and initial pH (X3) of water samples, while the responses were COD removal (Y1) and residual turbidity (Y2). The optimal conditions obtained by solving the quadratic regression models, as well as by analyzing the response surface contour plots, were as follows: 2.4 g/L of coagulant (aluminum sulfate), 60.05 mg/L of flocculent, and about 9.23 as initial pH. Under these conditions, the coagulation/flocculation treatment was able to achieve 99% of COD removal with total turbidity elimination (100% removal). Analysis of variance showed high variance coefficient (R2) values of 0.929 and 0.836 for COD and turbidity removals, respectively, thus ensuring a satisfactory adjustment of the second-order regression model with the experimental data. This statistical design methodology was demonstrated as an efficient and feasible approach for the optimization of coagulation/flocculation treatment.