Single-Shot Multispectral Encoding: Advancing Optical Lithography for Encryption and Spectroscopy.

Most modern optical display and sensing devices utilize a limited number of spectral units within the visible range, based on human color perception. In contrast, the rapid advancement of machine-based pattern recognition and spectral analysis could facilitate the use of multispectral functional units, yet the challenge of creating complex, high-definition, and reproducible patterns with an increasing number of spectral units limits their widespread application. Here, we report a technique for optical lithography that employs a single-shot exposure to reproduce perovskite films with spatially controlled optical band gaps through light-induced compositional modulations. Luminescent patterns are designed to program correlations between spatial and spectral information, covering the entire visible spectral range. Using this platform, we demonstrate multispectral encoding patterns for encryption and multivariate optical converters for dispersive optics-free spectroscopy with high spectral resolution. The fabrication process is conducted at room temperature and can be extended to other material and device platforms.

Case of pulmonary Langerhans cell histiocytosis presenting as ground-glass opacity in the lower lung.

Nodules and cysts with upper lobe predominance on chest computed tomography (CT) are highly suggestive of pulmonary Langerhans cell histiocytosis (PLCH). Herein, we describe a case of PLCH that presented with the unusual CT findings of subpleural ground-glass opacity (GGO) and traction bronchiectasis mostly in both lower lungs. No nodules or cysts were observed in the upper or middle lung areas. Video-assisted thoracoscopic biopsies were performed at the right lower lobe. Biopsy specimens showed findings consistent with those of scarred PLCH. To the best of our knowledge, this is the first case of PLCH presenting as GGO in the lower lungs.

Serum Homocysteine Levels and All-Cause and Cause-Specific Mortality in Korean Adult Men: A Cohort Study.

BACKGROUND: Hyperhomocysteinemia can increase the risk of cardiovascular disease (CVD), cancer, and neurological disorders; however, hypohomocysteinemia is generally not considered harmful. This study aimed to evaluate the relationship between all levels of homocysteine, both low and high homocysteine levels, and the risk of all-cause and cause-specific mortality in adult Korean men. METHODS: Adult Korean men (n = 221,356) were categorized into quintiles based on their homocysteine levels. The primary endpoints were all-cause, CVD, cancer, and dementia mortality. Hazard ratios were calculated using Cox proportional hazards models, and the dose-response relationship between homocysteine levels and mortality risk was further explored using restricted cubic spline models. RESULTS: Compared with the reference category (Q2, 8.8-9.9 µmol/L), there was a significant increase in all-cause mortality associated with both low and high levels after multivariable adjustment (Pinteraction = 0.002). Additionally, in spline regression, a U-shaped association between homocysteine levels and all-cause and CVD mortality was observed (inflection point = 9.1 µmol/L). This association was not observed in the vitamin supplementation subgroup. CONCLUSION: Among Korean adult men, both low and high homocysteine levels increased the risk of all-cause and CVD mortality, indicating a U-shaped relationship. However, this relationship was not statistically significant with vitamin supplementation, suggesting a potential protective role for vitamins.

Finite element analysis of fixation stability according to reduction position for internal fixation of intertrochanteric fractures.

In recent years, finite element analysis (FEA) has been instrumental in comparing the biomechanical stability of various implants for femur fracture treatment and in studying the advantages and disadvantages of different surgical techniques. This analysis has proven helpful for enhancing clinical treatment outcomes. Therefore, this study aimed to numerically analyze fixed stability according to location using FEA. In this study, a virtual finite element model was created based on a clinically anatomically reduced patient. It incorporated positive and negative support derived from intramedullary and extramedullary reduction from the anteroposterior (AP) view and neutral support from the lateral view. The generated model was analyzed to understand the biomechanical behavior occurring in each region under applied physiological loads. The simulation results of this study showed that the average von Mises stress (AVMS) of the nail when performing intramedullary reduction for femoral fixation was 187% of the anatomical reduction and 171% of the extramedullary reduction, and individually up to 2.5 times higher. In other words, intramedullary reduction had a very high possibility of fixation failure compared to other reduction methods. This risk is amplified significantly, especially in situations where bone strength is compromised due to factors such as old age or osteoporosis, which substantially affects the stability of fixation. Extramedullary reduction, when appropriately positioned, demonstrates greater stability than anatomical reduction. It exhibits stable fixation even in scenarios with diminished bone strength. In instances in which the bone density was low in the support position, as observed in the lateral view, the AVMS on the nail appeared to be relatively low, particularly in cases of positive support. Additionally, the femur experienced lower equivalent stress only in the extramedullary reduction-negative position. Moreover, by comparing different reduction methods and bone stiffness values using the same femoral shape, this study offers insights into the selection of appropriate reduction methods. These insights could significantly inform decision making regarding surgical strategies for intertrochanteric fractures.

Tailoring the Thermoelectric Properties of 3D-Printed n-Type Bi1.7Sb0.3Te3 with Incorporated Edge-Oxidized Graphene.

Using three-dimensional (3D) printing technology to fabricate Bi2Te3-based thermoelectric (TE) generators opens a potential way to create shape-conformable devices capable of recovering waste heat from thermal energy sources with diverse surface morphologies. However, pores formed in 3D-printed Bi2Te3-based materials by the removal of the organic ink binder result in unsatisfactory performance compared to the bulk materials, which has limited the widespread application of the ink-based 3D printing process. Furthermore, managing the volatile Se element in the n-type materials poses significant technological challenges compared to the p-type counterparts, resulting in a scarcity of research on 3D printing of n-type Bi2Te3. Here, we synthesized edge-oxidized graphene (EOG)-incorporated Se-free n-type Bi1.7Sb0.3Te3 (BST) using a direct ink writing (DIW) process with a binder-free novel ink. The incorporated EOG provides connectivity between small BST grains separated by pores and induces a bimodal-like grain structure during the DIW and sintering process. The optimal EOG content of 0.1 wt % in 3D-printed n-type BST simultaneously achieved both carrier transport control and active phonon scattering, due to its unique microstructure. A maximum ZT of 0.71 was obtained in the 0.1 wt % EOG/BST materials at 448 K, comparable to commercial bulk n-type Bi2Te3-based materials. Further, a single-element device composed of the EOG-BST material exhibited a 2-fold improvement in performance compared to pure-BST. These results open a technological route for the application of 3D printing technology for ink-based TE materials.

SRPK3 Is Essential for Cognitive and Ocular Development in Humans and Zebrafish, Explaining X-Linked Intellectual Disability.

OBJECTIVE: Intellectual disability is often the outcome of neurodevelopmental disorders and is characterized by significant impairments in intellectual and adaptive functioning. X-linked intellectual disability (XLID) is a subset of these disorders caused by genetic defects on the X chromosome, affecting about 2 out of 1,000 males. In syndromic form, it leads to a broad range of cognitive, behavioral, ocular, and physical disabilities. METHODS: Employing exome or genome sequencing, here we identified 4 missense variants (c.475C > G; p.H159D, c.1373C > A; p.T458N, and c.1585G > A; p.E529K, c.953C > T; p.S318L) and a putative truncating variant (c.1413_1414del; p.Y471*) in the SRPK3 gene in 9 XLID patients from 5 unrelated families. To validate SRPK3 as a novel XLID gene, we established a knockout (KO) model of the SRPK3 orthologue in zebrafish. RESULTS: The 8 patients ascertained postnatally shared common clinical features including intellectual disability, agenesis of the corpus callosum, abnormal eye movement, and ataxia. A ninth case, ascertained prenatally, had a complex structural brain phenotype. Together, these data indicate a pathological role of SRPK3 in neurodevelopmental disorders. In post-fertilization day 5 larvae (free swimming stage), KO zebrafish exhibited severe deficits in eye movement and swim bladder inflation, mimicking uncontrolled ocular movement and physical clumsiness observed in human patients. In adult KO zebrafish, cerebellar agenesis and behavioral abnormalities were observed, recapitulating human phenotypes of cerebellar atrophy and intellectual disability. INTERPRETATION: Overall, these results suggest a crucial role of SRPK3 in the pathogenesis of syndromic X-linked intellectual disability and provide new insights into brain development, cognitive and ocular dysfunction in both humans and zebrafish. ANN NEUROL 2024.

Risk factors for the failure of re-implanted dental implants: A 20-year retrospective study.

BACKGROUND: Re-implantation of failed implants is common to maintain the original prosthetic plan; however, it may not always be ideal due to various factors. Few studies have thoroughly investigated the outcomes of re-implanted implants, while considering factors that can enhance their survival rates. Therefore, this study aimed to identify the risk factors that may contribute to the refailure of implants placed the second time by analyzing previously failed implants and evaluating their survival. METHODS: Of 10,666 dental implants placed in 4063 patients at the Department of Periodontics of the Gangneung-Wonju National University Dental Hospital between December 1999 and March 2021, 259 failed implants in 170 patients were evaluated through clinical and radiographic records for patient-, surgical-, implant-, and prosthesis-related factors; survival analysis was conducted for implants that met the inclusion criteria. RESULTS: Of the 259 failed implants, 80 second-time-placed implants met the inclusion criteria. Survival analysis showed that the 1-year survival rate of second-time-placed implants was 88.1%. Smoking (hazard ratio [HR] = 5.066, p = 0.081), implant surface (HR = 18.776, p < 0.01), and timing of reimplantation (HR = 0.086, p < 0.01) were identified as risk factors influencing the refailure of second-time-placed implants. CONCLUSIONS: The survival rate of second-time-placed implants was lower than that of first-time-placed implants. The risk factors for second-time-placed implant failure were smoking, implant surface, and timing of reimplantation. To prevent further failure, previous failure factors should be analyzed and modifiable risk factors must be controlled before reimplantation.

Integrated 1D epitaxial mirror twin boundaries for ultrascaled 2D MoS2 field-effect transistors.

In atomically thin van der Waals materials, grain boundaries-the line defects between adjacent crystal grains with tilted in-plane rotations-are omnipresent. When the tilting angles are arbitrary, the grain boundaries form inhomogeneous sublattices, giving rise to local electronic states that are not controlled. Here we report on epitaxial realizations of deterministic MoS2 mirror twin boundaries (MTBs) at which two adjoining crystals are reflection mirroring by an exactly 60° rotation by position-controlled epitaxy. We showed that these epitaxial MTBs are one-dimensionally metallic to a circuit length scale. By utilizing the ultimate one-dimensional (1D) feature (width ~0.4 nm and length up to a few tens of micrometres), we incorporated the epitaxial MTBs as a 1D gate to build integrated two-dimensional field-effect transistors (FETs). The critical role of the 1D MTB gate was verified to scale the depletion channel length down to 3.9 nm, resulting in a substantially lowered channel off-current at lower gate voltages. With that, in both individual and array FETs, we demonstrated state-of-the-art performances for low-power logics. The 1D epitaxial MTB gates in this work suggest a novel synthetic pathway for the integration of two-dimensional FETs-that are immune to high gate capacitance-towards ultimate scaling.

Review of Scoring Systems for Predicting 30-Day Mortality in Ruptured Abdominal Aortic Aneurysm.

BACKGROUND: Ruptured abdominal aortic aneurysms (rAAAs) are a serious disease that can lead to high mortality; thus, their early prediction can save patients' lives. The aim of this study was to compare the accuracies of various models for predicting rAAA mortality-including the Glasgow Aneurysm Score, Vancouver Scoring System, Dutch Aneurysm Score, Edinburgh Ruptured Aneurysm Score (ERAS), and Hardman index-based on rAAA treatment outcomes at our institution. METHODS: Between 2016 and 2022, we retrospectively analyzed the early outcome data-including 30-day mortality-of patients who underwent emergency surgery for rAAA at our institution. Receiver operating characteristic curve analysis was performed to compare the aneurysm scoring systems for mortality using the area under the receiver operating characteristic curve (AUC). RESULTS: The AUC was better for the ERAS (0.718; 95% confidence interval, 0.601-0.817) than for the other scoring systems. Significant differences were observed between ERAS and Hardman indices (difference: 0.179; P = 0.016). No significant differences were found among the Glasgow Aneurysm Score, Vancouver Scoring System, and Dutch Aneurysm Score predictive risk models. CONCLUSIONS: Among the models for predicting mortality in patients with rAAA, the ERAS model demonstrated the highest AUC value; however, significant differences were only observed between ERAS and Hardman indices. This study may help develop strategies for improving rAAA prediction.

Antifungal activity of synthetic xanthenone against fluconazole-resistant Candida auris and its mechanism of action.

Candida auris, an emerging multidrug-resistant fungal pathogen discovered in Japan in 2009, poses a significant global health threat, with infections reported in about 25 countries. The escalation of drug-resistant strains underscores the urgent need for new treatment options. This study aimed to investigate the antifungal potential of 2,3,4,4a-tetrahydro-1H-xanthen-1-one (XA1) against C. auris, as well as its mechanism of action and toxic profile. The antifungal activity of XA1 was first evaluated by determining the minimum inhibitory concentration (MIC), time-kill kinetics and biofilm inhibition. In addition, structural changes, membrane permeability, reactive oxygen species (ROS) production, and in vitro and in vivo toxicity of C. auris after exposure to XA1 were investigated. The results indicated that XA1 exhibited an MIC of 50 µg/mL against C. auris, with time-kill kinetics highlighting its efficacy. Field emission scanning electron microscopy (FE-SEM) showed structural damage in XA1-treated cells, supported by increased membrane permeability leading to cell death. Furthermore, XA1 induced ROS production and significantly inhibited biofilm formation. Importantly, XA1 exhibited low cytotoxicity in human epidermal keratinocytes (HaCaT), with a cell viability of over 90 % at 6.25 µg/mL. In addition, an LD50 of 17.68 µg/mL was determined in zebrafish embryos 24 h post fertilization (hpf), with developmental delay observed at prolonged exposure at 6.25 µg/mL (48-96 hpf). These findings position XA1 as a promising candidate for further research and development of an effective antifungal agent.

Evaluation of clinical effectiveness of blood stasis leaflet in patients with blood stasis: A prospective, randomized, and crossover trial.

BACKGROUND: Blood stasis (BS) refers to a pattern of symptoms resulting from circulatory dysfunction or stagnation in the human body. Due to its historical origin and diverse interpretations, communication between patients and doctors of traditional Korean medicine (DKMs) presents challenges. Efforts to improve patients understanding in traditional Korean medicine (TKM) have led to the development of disease-specific standard clinical practice guidelines. However, there is a limited focus on creating clinical practice guidelines or informative leaflet specifically addressing BS, which is a frequently encountered pattern of symptoms in TKM. METHODS: This study aimed to bridge the gap between patients and DKMs by developing an informative leaflet focusing on BS for metabolic diseases. We assessed its appropriateness through expert advisory meetings and the Delphi process, and evaluated its clinical effectiveness. We conducted a prospective, randomized, crossover trial to compare the clinical effectiveness of using BS leaflets in TKM treatment. The hypothesis investigated whether the leaflet group would show higher scores in satisfaction of DKMs' explanations, understanding of DKMs' explanations, improving the reliability of TKM, satisfaction with treatment time, improvement in explanations compared to previous TKM experiences, and necessity of managing BS treatment, compared to the no-leaflet group. RESULTS: In a study involving 40 patients (mean age: 62.3 ±â€…7.8 years), symptoms persisted for an average of 16.75 ±â€…9.3 hours daily, with a severity rating of 2.53. The leaflet group exhibited significantly higher satisfaction scores than the no-leaflet group in all aspects (all P < .0001). After confirming the absence of sequence and period effects using a linear-mixed effect model, we were able to ascertain the presence of a treatment effect, as evidenced by statistically significant higher scores across all survey items in the leaflet group compared to the no-leaflet group (all P < .0001). CONCLUSION: Expert consensus on symptoms aligning with the BS pattern resulted in the development of an informative leaflet. Its utilization notably improved patient satisfaction, comprehension, and trust in TKM treatment, unaffected by temporal influences, thus demonstrating its clinical effectiveness. In summary, the BS leaflet significantly enhanced patient understanding and optimized treatment procedures.

Lyso-H2S: A Mycophenolic Acid-Derived Probe for Ultra-Low Toxicity, Intracellular H2S Detection, and Zebrafish Model Validation.

In several biological processes, H2S is known to function as an endogenous gaseous agent. It is very necessary to monitor H2S and relevant physiological processes in vivo. Herein, a new type of fluorophore with a reliable leaving group allows for excited-state intramolecular transfer characteristics (ESIPT), inspired by mycophenolic acid. A morpholine ring was connected at the maleimide position of the probe to target the lysosome. Subsequently, the dinitrophenyl group known for a photoinduced electron transfer (PET) effect, was connected to allow for an effective "turn-on" probe Lyso-H2S. Lyso-H2S demonstrated strong selectivity towards H2S, a large Stokes shift (111 nm), and an incredibly low detection limit (41.8 nM). The imaging of endogenous and exogenous H2S in living cells (A549 cell line) was successfully achieved because of the specificity and ultra-low toxicity (100 % cell viability at 50 µM concentration of Lyso-H2S.) Additionally, Lyso-H2S was also employed to visualize the activity of H2S in the gallbladder and intestine in a living zebrafish model. This is the first report of a fluorescent probe to track H2S sensing in specific organ systems to our knowledge.

Complimentary vertebrate Wac models exhibit phenotypes relevant to DeSanto-Shinawi Syndrome.

Monogenic syndromes are associated with neurodevelopmental changes that result in cognitive impairments, neurobehavioral phenotypes including autism and attention deficit hyperactivity disorder (ADHD), and seizures. Limited studies and resources are available to make meaningful headway into the underlying molecular mechanisms that result in these symptoms. One such example is DeSanto-Shinawi Syndrome (DESSH), a rare disorder caused by pathogenic variants in the WAC gene. Individuals with DESSH syndrome exhibit a recognizable craniofacial gestalt, developmental delay/intellectual disability, neurobehavioral symptoms that include autism, ADHD, behavioral difficulties and seizures. However, no thorough studies from a vertebrate model exist to understand how these changes occur. To overcome this, we developed both murine and zebrafish Wac/wac deletion mutants and studied whether their phenotypes recapitulate those described in individuals with DESSH syndrome. We show that the two Wac models exhibit craniofacial and behavioral changes, reminiscent of abnormalities found in DESSH syndrome. In addition, each model revealed impacts to GABAergic neurons and further studies showed that the mouse mutants are susceptible to seizures, changes in brain volumes that are different between sexes and relevant behaviors. Finally, we uncovered transcriptional impacts of Wac loss of function that will pave the way for future molecular studies into DESSH. These studies begin to uncover some biological underpinnings of DESSH syndrome and elucidate the biology of Wac, with advantages in each model.

Rhamnogalacturonan lyase 1 (RGL1), as a suppressor of E3 ubiquitin ligase Arabidopsis thaliana ring zinc finger 1 (AtRZF1), is involved in dehydration response to mediate proline synthesis and pectin rhamnogalacturonan-I composition.

Proline metabolism plays a crucial role in both environmental stress responses and plant growth. However, the specific mechanism by which proline contributes to abiotic stress processes remains to be elucidated. In this study, we utilized atrzf1 (Arabidopsis thaliana ring zinc finger 1) as a parental line for T-DNA tagging mutagenesis and identified a suppressor mutant of atrzf1, designated proline content alterative 31 (pca31). The pca31 mutant suppressed the insensitivity of atrzf1 to dehydration stress during early seedling growth. Using Thermal Asymmetric Interlaced-PCR, we found that the T-DNA of pca31 was inserted into the promoter region of the At2g22620 gene, which encodes the cell wall enzyme rhamnogalacturonan lyase 1 (RGL1). Enzymatic assays indicated that RGL1 exhibited rhamnogalacturonan lyase activity, influencing cell wall pectin composition. The decrease in RGL1 gene expression suppressed the transcriptomic perturbation of the atrzf1 mutant. Silencing of the RGL1 gene in atrzf1 resulted in a sensitive phenotype similar to pca31 under osmotic stress conditions. Treatment with mannitol, salt, hydrogen peroxide, and abscisic acid induced RGL1 expression. Furthermore, we uncovered that RGL1 plays a role in modulating root growth and vascular tissue development. Molecular, physiological, and genetic experiments revealed that the positive modulation of RGL1 during abiotic stress was linked to the AtRZF1 pathway. Taken together, these findings establish that pca31 acts as a suppressor of atrzf1 in abiotic stress responses through proline and cell wall metabolisms.

Subscapularis Repair in Reverse Total Shoulder Arthroplasty: Differences in Outcomes Based on Preoperative Quality of Subscapularis Tendon.

Purpose: This study examines the influence of preoperative fatty infiltration (FI) of the subscapularis tendon (SBS) on outcomes following reverse total shoulder arthroplasty (rTSA) with SBS repair. Methods: A cohort of 161 rTSA patients with SBS repair, followed for a mean of 45.3 months, was divided into three groups based on FI: Group A (intact upper and lower portions, n = 85), Group B (intact lower portions, n = 44), and Group C (fatty infiltrated in both portions, n = 32). The mean age was 74.5 years (range: 65-95). Results: Preoperative FI displayed significant disparity among the groups: Group A (1.18 ± 0.60), Group B (2.95 ± 0.56), and Group C (4.0 ± 0.00) (p < .001). Group A exhibited a more positive trend in activities of daily living, particularly in toileting ability (81% in Group A, 68% in Group B, and 72% in Group C), although without statistical significance (p = 0.220). Complication rates varied: Group A had seven acromial fractures (8%), three cases of instability (3%), and six instances of scapular notching (7%). Group B experienced four acromial fractures (9%) and four cases of scapular notching (9%), while Group C had only one case of scapular notching (3%) (p = 0.733). Conclusion: In cases characterized by favorable preoperative SBS quality, there was an elevation in functional internal rotation (IR) post-surgery, accompanied by an increased incidence of postoperative complications. Hence, careful consideration is advised when determining the necessity for SBS repair. Level of Evidence: Level III, retrospective comparative study.

Molybdenum oxide/nickel molybdenum oxide heterostructures hybridized active platinum co-catalyst toward superb-efficiency water splitting catalysis.

A new catalyst has been developed that utilizes molybdenum oxide (MoO3)/nickel molybdenum oxide (NiMoO4) heterostructured nanorods coupled with Pt ultrafine nanoparticles for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) toward industrial-grade water splitting. This catalyst has been synthesized using a versatile approach and has shown to perform better than noble-metals catalysts, such as Pt/C and RuO2, at industrial-grade current level (≥1000 mA·cm-2). When used simultaneously as a cathode and anode, the proposed material yields 10 mA·cm-2 at a remarkably small cell voltage of 1.55 V and has shown extraordinary durability for over 50 h. Density functional theory (DFT) calculations have proved that the combination of MoO3 and NiMoO4 creates a metallic heterostructure with outstanding charge transfer ability. The DFT calculations have also shown that the excellent chemical coupling effect between the MoO3/NiMoO4 and Pt synergistically optimize the charge transfer capability and Gibbs free energies of intermediate species, leading to remarkably speeding up the reaction kinetics of water electrolysis.

Assessing the Preservation of Lumbar Lordotic Curvature in Everyday Sitting Conditions Assessed with an Inertial Measurement System.

Background/Objectives: Lumbar lordotic curvature (LLC), closely associated with low back pain (LBP) when decreased, is infrequently assessed in clinical settings due to the spatiotemporal limitations of radiographic methods. To overcome these constraints, this study used an inertial measurement system to compare the magnitude and maintenance of LLC across various sitting conditions, categorized into three aspects: verbal instructions, chair type, and desk task types. Methods: Twenty-nine healthy participants were instructed to sit for 3 min with two wireless sensors placed on the 12th thoracic vertebra and the 2nd sacral vertebra. The lumbar lordotic angle (LLA) was measured using relative angles for the mediolateral axis and comparisons were made within each sitting category. Results: The maintenance of LLA (LLAdev) was significantly smaller when participants were instructed to sit upright (-3.7 ± 3.9°) compared to that of their habitual sitting posture (-1.2 ± 2.4°) (p = 0.001), while the magnitude of LLA (LLAavg) was significantly larger with an upright sitting posture (p = 0.001). LLAdev was significantly larger when using an office chair (-0.4 ± 1.1°) than when using a stool (-3.2 ± 7.1°) (p = 0.033), and LLAavg was also significantly larger with the office chair (p < 0.001). Among the desk tasks, LLAavg was largest during keyboard tasks (p < 0.001), followed by mouse and writing tasks; LLAdev showed a similar trend without statistical significance (keyboard, -1.2 ± 3.0°; mouse, -1.8 ± 2.2°; writing, -2.9 ± 3.1°) (p = 0.067). Conclusions: Our findings suggest that strategies including the use of an office chair and preference for computer work may help preserve LLC, whereas in the case of cueing, repetition may be necessary.

A Simple Tube Escape Assay to Test Learning and Memory in Zebrafish with Minimized Habituation.

Various methods have been used in rodents to evaluate learning and memory. Although much less frequently used, the zebrafish emerges as an alternative model organism in this context. For example, it allows assessing potential behavioral deficits because of neurodevelopmental disorders or environmental neurotoxins. A variety of learning tasks have been employed in previous studies that required extensive habituation and training sessions. Here, we introduce a simpler and faster method to evaluate learning and memory of zebrafish with minimum habituation. A new apparatus, a transparent L-shaped tube, was developed in which we trained each zebrafish to swim through a long arm and measured the time to swim through this arm. We demonstrate that in this task, zebrafish could acquire both short-term (1 h) and long-term memory (4 days). We also studied learning and memory of a gene knockout (KO) zebrafish that showed social impairments related to autism. We found KO mutant zebrafish to show a quantitative impairment in habituation, learning, and memory performance compared with wild-type control fish. In conclusion, we established a novel learning apparatus and sensitive paradigm that allowed us to evaluate learning and memory of adult zebrafish that required only a brief habituation period and minimal training.

Downregulation of TRIB3 enhances the sensitivity of lung cancer cells to amino acid deprivation by suppressing AKT activation.

Tribbles pseudokinase 3 (TRIB3), a member of the mammalian Tribbles family, is implicated in multiple biological processes. This study aimed to investigate the biological functions of TRIB3 in lung cancer and its effect on amino acid-deprived lung cancer cells. TRIB3 mRNA expression was elevated in lung cancer tissues and cell lines compared to normal lung tissues and cells. TRIB3 knockdown markedly reduced the viability and proliferation of H1299 lung cancer cells. Deprivation of amino acids, particularly arginine, glutamine, lysine, or methionine, strongly increased TRIB3 expression via ATF4 activation in H1299 lung cancer cells. Knockdown of TRIB3 led to transcriptional downregulation of ATF4 and reduced AKT activation induced by amino acid deprivation, ultimately increasing the sensitivity of H1299 lung cancer cells to amino acid deprivation. Additionally, TRIB3 knockdown enhanced the sensitivity of H1299 cells to V-9302, a competitive antagonist of transmembrane glutamine flux. These results suggest that TRIB3 is a pro-survival regulator of cell viability in amino acid-deficient tumor microenvironments and a promising therapeutic target for lung cancer treatment.

Development of cell-laden photopolymerized constructs with bioactive amorphous calcium magnesium phosphate for bone tissue regeneration via 3D bioprinting.

The synthesis of ideal bioceramics to guide the fate of cells and subsequent bone regeneration within the chemical, biological, and physical microenvironment is a challenging long-term task. This study developed amorphous calcium magnesium phosphate (ACMP) bioceramics via a simple co-precipitation method. The role of Mg2+ in the formation of ACMP is investigated using physicochemical and biological characterization at different Ca/Mg molar ratio of the initial reaction solution. Additionally, ACMP bioceramics show superior cytocompatibility and improved osteogenic differentiation of co-cultured MC3T3-E1 cells. Regulation of the microenvironment with Mg2+ can promote early-stage bone regeneration. For this, bioprinting technology is employed to prepare ACMP-modified 3D porous structures. Our hypothesis is that the incorporation of ACMP into methacrylated gelatin (GelMA) bioink can trigger the osteogenic differentiation of encapsulated preosteoblast and stimulate bone regeneration. The cell-laden ACMP composite structures display stable printability and superior cell viability and cell proliferation. Also, constructs loading the appropriate amount of ACMP bioceramic showed significant osteogenic differentiation activity compared to the pure GelMA. We demonstrate that the dissolved Mg2+ cation microenvironment in ACMP-modified composite constructs plays an effective biochemical role, and can regulate cell fate. Our results predict that GelMA/ACMP bioink has significant potential in patient-specific bone tissue regeneration.