Oxyntic Gland Neoplasms - From Adenoma to Advanced Gastric Cancer: A Review of 29 Cases.

PURPOSE: Oxyntic gland neoplasm (OGN) is a rare condition that can be classified as oxyntic gland adenoma (OGA) or gastric adenocarcinoma of fundic-gland type (GA-FG). GA-FG primarily presents as early gastric cancer, with only a few reported cases of advanced gastric cancer (AGC). We aimed to investigate the clinicopathological features of OGN and describe an aggressive variant. MATERIALS AND METHODS: We investigated a total of 29 cases, including a patient with double primary cases, diagnosed with OGN or differentiated-type adenocarcinoma with GA-FG morphology, between November 2016 and April 2022. We analyzed 54 pathological specimens and reviewed their clinicopathological, endoscopic, and histological features. The lesions were reclassified as OGA or GA-FG, and immunohistochemical (IHC) staining for MUC-5AC and MUC-6 was performed on available resected GA-FG cases. RESULTS: The median patient age was 65 years and males accounted for 58.6% of patients. Most cases occurred in the body horizontally (69.0%) and on the greater curvature side cross-sectionally (48.3%). Endoscopically, type 0-IIa (41.4%) and a subepithelial tumor-like appearance (24.1%) were the most common findings. Histologically, there were 8 cases of OGA (27.6%) and 21 cases of GA-FG (72.4%). In GA-FG, MUC-6 was positive in 13 cases (81.3%), whereas MUC-5AC was positive in 8 cases (50.0%). Three cases presented as AGCs. CONCLUSIONS: Although OGNs are generally considered low-grade, they can present as AGCs and may exhibit features of lymphovascular or perineural invasion. Recognizing the clinicopathological features and accurately diagnosing OGN are important for providing adequate treatment.

Artificial intelligence algorithm for neoplastic cell percentage estimation and its application to copy number variation in urinary tract cancer.

BACKGROUND: Bladder cancer is characterized by frequent mutations, which provide potential therapeutic targets for most patients. The effectiveness of emerging personalized therapies depends on an accurate molecular diagnosis, for which the accurate estimation of the neoplastic cell percentage (NCP) is a crucial initial step. However, the established method for determining the NCP, manual counting by a pathologist, is time-consuming and not easily executable. METHODS: To address this, artificial intelligence (AI) models were developed to estimate the NCP using nine convolutional neural networks and the scanned images of 39 cases of urinary tract cancer. The performance of the AI models was compared to that of six pathologists for 119 cases in the validation cohort. The ground truth value was obtained through multiplexed immunofluorescence. The AI model was then applied to 41 cases in the application cohort that underwent next-generation sequencing testing, and its impact on the copy number variation (CNV) was analyzed. RESULTS: Each AI model demonstrated high reliability, with intraclass correlation coefficients (ICCs) ranging from 0.82 to 0.88. These values were comparable or better to those of pathologists, whose ICCs ranged from 0.78 to 0.91 in urothelial carcinoma cases, both with and without divergent differentiation/ subtypes. After applying AI-driven NCP, 190 CNV (24.2%) were reclassified with 66 (8.4%) and 78 (9.9%) moved to amplification and loss, respectively, from neutral/minor CNV. The neutral/minor CNV proportion decreased by 6%. CONCLUSIONS: These results suggest that AI models could assist human pathologists in repetitive and cumbersome NCP calculations.

Enhanced Free Li-Ion Mobility in Solid-State Electrolytes via Long-Range Assembly of Porous Materials.

Metal-organic frameworks (MOFs), with their tunable pore sizes and high surface areas, are gaining prominence in Li metal battery applications, including their use as nanofillers in solid composite electrolytes (SCEs) for enhanced ionic conductivity. Yet, when used in SCEs, individual dispersed MOF particles in isolation as nanofillers can impede efficient ion transport in all-solid-state batteries due to the insufficient supply of ionic transport pathways within SCEs. Here, we introduced a continuous SCE nanofiller with long-range assembly interconnected porous MOFs (IMOF_SCE) for effective ion transport pathway supply along the interface between the nanofiller and the polymer matrix. IMOF_SCE achieved Li-ion conductivity (6.72 × 10-5 S cm-1 at 20 °C) and Li-ion transference number (tLi+ = 0.855), resulting in the improved electrochemical performance of Li metal batteries. Additionally, the Li/LiFePO4 full cell integrated with IMOF_SCE achieved an outstanding stable capacity retention of 98.8% in 300 cycles. This work offers insights into the design strategy of effective nanofillers for SCEs and can be adapted for other porous materials.

Hole transport layer engineering in high performance quasi-2D perovskite blue light emitting diodes.

Quasi-2D perovskites have emerged as highly promising materials for application in perovskite light-emitting diodes (PeLEDs), garnering significant attention due to their outstanding semiconductor properties. These materials boast an inherent multi-quantum well structure that imparts a robust confinement effect, particularly advantageous for blue emission. However, the development of blue emitters utilizing quasi-2D perovskites encounters challenges, notably colour instability, multipeak emission, and suboptimal fluorescence yield. The hole transfer layer (HTL) on which the perovskite layer is deposited in PeLEDs further affects the performance and efficiency. In this review, we delve into the evolution of blue PeLEDs and elucidate the optical properties of quasi-2D perovskites with the primary focus on HTL materials. We explore different HTL materials like PEDOT:PSS, metal oxides, and conjugated polyelectrolytes as well as ionic liquids, and their role in enhancing the colour stability, minimizing interfacial defects and increasing the fluorescence yield. This review endeavours to provide a holistic perspective of the different HTLs and serve as a valuable reference for researchers navigating the realm of HTL engineering towards the realization of high-performance blue quasi-2D PeLEDs.

Clinical Outcomes of Small Cell Carcinoma of the Genitourinary Tract and the Prognostic Significance of the Tumor Immune Microenvironment.

PURPOSE: Small cell carcinoma of the genitourinary tract (GU SCC) is a rare disease with a poor prognosis. There are only limited treatment options due to insufficient understanding of the disease. In this study, we analyzed the clinical outcomes of patients with GU SCC and their association with the tumor immune phenotype. MATERIALS AND METHODS: Patients diagnosed with GU SCC were included. Survival outcomes according to the primary location (prostate and non-prostate) and stages (limited disease [LD] and extensive disease [ED]) were analyzed. We performed multiplex immunohistochemistry (IHC) in non-prostate SCC patients and analyzed the immune cell population. RESULTS: A total of 77 patients were included in this study. Their median age was 71 years, 67 patients (87.0%) were male, and 48 patients (62.3%) had non-prostate SCC. All patients with ED (n=31, 40.3%) received etoposide plus platinum (EP) as initial treatment and median overall survival (OS) was 9.7 months (95% confidence interval [CI], 7.1 to 18.6). Patients with LD (n=46, 59.7%) received EP followed by radiotherapy or surgery, and 24-months OS rate was 63.6% (95% CI, 49.9 to 81.0). The multiplex IHC analysis of 21 patients with non-prostate SCC showed that patients with a higher density of programmed death-ligand 1-expressing CD68+CD206+ M2-like macrophages had significantly worse OS outcomes with an adjusted hazards ratio of 4.17 (95% CI, 1.25 to 14.29; adjusted p=0.02). CONCLUSION: Patients with GU SCC had a poor prognosis, even those with localized disease. The tumor immune phenotypes were significantly associated with survival. This finding provides new insights for treating GU SCC.

Reconsideration of the Diagnostic Criteria for an Atypical Placental Site Nodule Comparing Typical Placental Site Nodule of the Uterus: A Report of Two Cases.

Placental site nodules (PSNs) are non-neoplastic remnants of chorionic-type intermediate trophoblastic cells from a previous gestation that form a well-defined single nodule or multiple nodules in the uterine and extrauterine sites. As the cases of PSNs transformed into gestational trophoblastic tumors were described in the literature, "atypical placental site nodules" (APSNs) have been considered as putative transitional lesions between PSNs and gestational trophoblastic tumors. Although histologic criteria and cutoff point of Ki-67 proliferation index for differentiating an APSN from a typical PSN have not been clearly defined, nodules larger than 5 mm with increased cellularity, a corded or nested appearance, marked nuclear atypia, increased mitotic activity, and an increased Ki-67 proliferation index (>5% or >8%) of intermediate trophoblastic cells seem to be accepted as diagnostic criteria for APSNs. However, some of the criteria, including lesion size and histologic features of the trophoblastic cells in the nodule are not only subjective but have features inherent of the intermediate trophoblastic cells of the fetal membrane and a typical PSN. We thought that it is not reasonable to consider them as diagnostic features of APSNs, if not associated with cellular proliferation. We present 2 cases of incidentally identified PSNs that were larger than 10 mm in size with a corded or nested arrangement of trophoblastic cells, which could have been categorized as APSNs according to the currently proposed criteria to discuss whether the currently proposed diagnostic criteria for APSNs are appropriate.

Enhanced Performance of Inverted Perovskite Quantum Dot Light-Emitting Diode Using Electron Suppression Layer and Surface Morphology Control.

The energy level offset at inorganic layer-organic layer interfaces and the mismatch of hole/electron mobilities of the individual layers greatly limit the establishment of balanced charge carrier injection inside the emissive layer of halide perovskite light-emitting diodes (PeQLEDs). In contrast with other types of light-emitting devices, namely OLEDs and QLEDs, various techniques such as inserting an electron suppression layer between the emissive and electron transport layer have been employed as a means of establishing charge carrier injection into their respective emissive layers. Hence, in this study, we report the use of a thin layer of Poly(4-vinylpyridine) (PVPy) (an electron suppression material) placed between the emissive and electron transport layer of a halide PeQLEDs fabricated with an inverted configuration. With ZnO as the electron transport material, devices fabricated with a thin PVPy interlayer between the ZnO ETL and CsPbBr3 -based green QDs emissive layer yielded a 4.5-fold increase in the maximum observed luminance and about a 10-fold increase in external quantum efficiency (EQE) when compared to ones fabricated without PVPy. Furthermore, the concentration and coating process conditions of CsPbBr3 QDs were altered to produce various thicknesses and film properties which resulted in improved EQE values for devices fabricated with QDs thin films of lower surface root-mean-square (RMS) values. These results show that inhibiting the excessive injection of electrons and adjusting QDs layer thickness in perovskite-inverted QLEDs is an effective way to improve device luminescence and efficiency, thereby improving the carrier injection balance.

Clinical implications of the tumor microenvironment using multiplexed immunohistochemistry in patients with advanced or metastatic renal cell carcinoma treated with nivolumab plus ipilimumab.

Purpose: Immune checkpoint inhibitors (ICIs) such as nivolumab and ipilimumab (N/I) are important treatment options for advanced renal cell carcinoma (RCC). The tumor microenvironment (TME) in these ICI-treated patients is largely unknown. Methods: Twenty-four patients treated with N/I between July 2015 and June 2020 were analyzed. Multiplexed immunohistochemistry (mIHC) was conducted to define the TME, including various T cell subsets, B cells, macrophages, and dendritic cells. Results: The median age of the study patients was 61 years (range, 39-80) and 75.0% of these cases were men. The objective response rate with N/I was 50.0%. The densities of the CD8+ cytotoxic T cells (P=0.005), specifically CD137+ CD8+ T cells (P=0.017), Foxp3- CD4+ helper T cells (P=0.003), Foxp3+ CD4+ regulatory T cells (P=0.045), CD68+ CD206- M1 macrophages (P=0.008), and CD68+ CD206+ M2 macrophages (P=0.021) were significantly higher in the treatment responders. At a median follow-up duration of 24.7 months, the median progression-free survival (PFS) was 11.6 months. The high densities (≥median) of Foxp3- CD4+ helper T cells (P=0.016) and CD68+ CD206- M1 macrophages (P=0.008) were significantly associated with better PFS, and the density of CD137+ CD8+ cytotoxic T cells (P=0.079) was marginally associated with better PFS. After multivariate analysis, the higher density of Foxp3- CD4+ helper T cells was independently associated with better PFS (hazard ratio 0.19; P=0.016). Conclusion: The properties and clinical implications of the TME properties in RCC indicate that Foxp3- CD4+ helper T cells, M1 macrophages, and CD137+ CD8+ T cells are potential predictive biomarkers and treatment targets.

Synaptophysin, CD117, and GATA3 as a Diagnostic Immunohistochemical Panel for Small Cell Neuroendocrine Carcinoma of the Urinary Tract.

Although SCNEC is based on its characteristic histology, immunohistochemistry (IHC) is commonly employed to confirm neuroendocrine differentiation (NED). The challenge here is that SCNEC may yield negative results for traditional neuroendocrine markers. To establish an IHC panel for NED, 17 neuronal, basal, and luminal markers were examined on a tissue microarray construct generated from 47 cases of 34 patients with SCNEC as a discovery cohort. A decision tree algorithm was employed to analyze the extent and intensity of immunoreactivity and to develop a diagnostic model. An external cohort of eight cases and transmission electron microscopy (TEM) were used to validate the model. Among the 17 markers, the decision tree diagnostic model selected 3 markers to classify NED with 98.4% accuracy in classification. The extent of synaptophysin (>5%) was selected as the initial parameter, the extent of CD117 (>20%) as the second, and then the intensity of GATA3 (≤1.5, negative or weak immunoreactivity) as the third for NED. The importance of each variable was 0.758, 0.213, and 0.029, respectively. The model was validated by the TEM and using the external cohort. The decision tree model using synaptophysin, CD117, and GATA3 may help confirm NED of traditional marker-negative SCNEC.

Coiled Conformation Hollow Carbon Nanosphere Cathode and Anode for High Energy Density and Ultrafast Chargeable Hybrid Energy Storage.

Lithium-ion batteries and pseudocapacitors are nowadays popular electrochemical energy storage for many applications, but their cathodes and anodes are still limited to accommodate rich redox ions not only for high energy density but also sluggish ion diffusivity and poor electron conductivity, hindering fast recharge. Here, we report a strategy to realize high-capacity/high-rate cathode and anode as a solution to this challenge. Multiporous conductive hollow carbon (HC) nanospheres with microporous shells for high capacity and hollow cores/mesoporous shells for rapid ion transfer are synthesized as cathode materials using quinoid:benzenoid (Q:B) unit resins of coiled conformation, leading to ∼5-fold higher capacities than benzenoid:benzenoid resins of linear conformation. Also, Ge-embedded Q:B HC nanospheres are derived as anode materials. The atomic configuration and energy storage mechanism elucidate the existence of mononuclear GeOx units giving ∼7-fold higher ion diffusivity than bulk Ge while suppressing volume changes during long ion-insertion/desertion cycles. Moreover, hybrid energy storage with a Q:B HC cathode and Ge-Q:B HC anode exploit the advantages of capacitor-type cathode and battery-type anode electrodes, as exhibited by battery-compatible high energy density (up to 285 Wh kg-1) and capacitor-compatible ultrafast rechargeable power density (up to 22 600 W kg-1), affording recharge within a minute.

A Study on Verification of Equivalence and Effectiveness of Non-Pharmacologic Dementia Prevention and Early Detection Contents : Non-Randomly Equivalent Design.

OBJECTIVE: The aim of this study was to verify the equivalence and effectiveness of the tablet-administered Korean Repeatable Battery for the Assessment of Neuropsychological Status (K-RBANS) for the prevention and early detection of dementia. METHODS: Data from 88 psychiatry and neurology patient samples were examined to evaluate the equivalence between tablet and paper administrations of the K-RBANS using a non-randomly equivalent group design. We calculated the prediction scores of the tablet-administered K-RBANS based on demographics and covariate-test scores for focal tests using norm samples and tested format effects. In addition, we compared the receiver operating characteristic curves to confirm the effectiveness of the K-RBANS for preventing and detecting dementia. RESULTS: In the analysis of raw scores, line orientation showed a significant difference (t=-2.94, p<0.001), and subtests showed small to large effect sizes (0.04-0.86) between paper- and tablet-administered K-RBANS. To investigate the format effect, we compared the predicted scaled scores of the tablet sample to the scaled scores of the norm sample. Consequently, a small effect size (d≤0.20) was observed in most of the subtests, except word list and story recall, which showed a medium effect size (d=0.21), while picture naming and subtests of delayed memory showed significant differences in the one-sample t-test. In addition, the area under the curve of the total scale index (TSI) (0.827; 95% confidence interval, 0.738-0.916) was higher than that of the five indices, ranging from 0.688 to 0.820. The sensitivity and specificity of TSI were 80% and 76%, respectively. CONCLUSION: The overall results of this study suggest that the tablet-administered K-RBANS showed significant equivalence to the norm sample, although some subtests showed format effects, and it may be used as a valid tool for the brief screening of patients with neuropsychological disorders in Korea.

Idiopathic Inflammatory Arthritis in the Auditory Canal in a Patient With Hearing Impairment: A Case Report and Literature Review.

Inflammatory arthritis can affect the auditory system during the disease course. Although most cases show asymptomatic hearing impairment, it can result in hearing loss. Here we describe the case of a 70-year-old female with hearing impairment associated with idiopathic inflammatory arthritis in her auditory system. She had suffered from hearing difficulties for decades; however, the causes of her hearing impairment had not been evaluated. Pure tone audiometry showed severe sensorineural hearing loss requiring a cochlear implant. The workup for the cochlear implant revealed erosive changes in the incudomalleolar and incudostapedial joints with soft tissue swelling on temporal bone computed tomography. Bone pathology revealed plasmacytic infiltration and granulomatous inflammation. Laboratory examinations showed elevated levels of inflammatory markers; otherwise, she had negative results for all autoantibodies. In patients with idiopathic hearing loss, inflammatory arthritis of the middle ear without peripheral arthritis can provide a clue regarding the cause of the hearing loss.

Short-term serial assessment of electronic patient-reported outcome for depression and anxiety in breast Cancer.

PURPOSE: The incidence of depression and anxiety is higher in patients with breast cancer than in the general population. We evaluated the degree of depression and anxiety and investigated the changes in patients with breast cancer during the treatment period and short-term follow-up period. METHODS: Overall, 137 patients with breast cancer were evaluated using the Patient Health Questionnaire 9-item depression scale (PHQ-9) and Generalized Anxiety Disorder scale (GAD-7). The scales were developed as a web-based electronic patient-reported outcome measure, and serial results were assessed before the operation, after the operation, in the post-treatment period, and in the 6-month follow-up period after surgery. RESULTS: The degree of depression and anxiety increased during treatment and decreased at 6-month follow-up, even if there were no statistical differences among the four periods (PHQ-9: p = 0.128; GAD-7: p = 0.786). However, daily fatigue (PHQ-9 Q4) and insomnia (PHQ-9 Q3) were the most serious problems encountered during treatment and at 6-month follow-up, respectively. In the GAD-7, worrying too much (Q3) consistently showed the highest scores during the treatment and follow-up periods. Of the patients, 7 (5.11%) and 11 (8.03%) patients had a worsened state of depression and anxiety, respectively, after treatment compared with before treatment. CONCLUSION: Most factors associated with depression and anxiety improved after treatment. However, factors such as insomnia and worrying too much still disturbed patients with breast cancer, even at 6-month follow-up. Therefore, serial assessment of depression and anxiety is necessary for such patients.

High-Resolution Colloidal Quantum Dot Film Photolithography via Atomic Layer Deposition of ZnO.

High-resolution patterning of quantum dot (QD) films is one of the preconditions for the practical use of QD-based emissive display platforms. Recently, inkjet printing and transfer printing have been actively developed; however, high-resolution patterning is still limited owing to nozzle-clogging issues and coffee ring effects during the inkjet printing and kinetic parameters such as pickup and peeling speed during the transfer process. Consequently, employing direct optical lithography would be highly beneficial owing to its well-established process in the semiconductor industry; however, exposing the photoresist (PR) on top of the QD film deteriorates the QD film underneath. This is because a majority of the solvents for PR easily dissolve the pre-existing QD films. In this study, we present a conventional optical lithography process to obtain solvent resistance by reacting the QD film surface with diethylzinc (DEZ) precursors using atomic layer deposition. It was confirmed that, by reacting the QD surface with DEZ and coating PR directly on top of the QD film, a typical photolithography process can be performed to generate a red/green/blue pixel of 3000 ppi or more. QD electroluminescence devices were fabricated with all primary colors of QDs; moreover, compared to reference QD-LED devices, the patterned QD-LED devices exhibited enhanced brightness and efficiency.

Metal-Organic Fragments with Adhesive Excipient and Their Utilization to Stabilize Multimetallic Electrocatalysts for High Activity and Robust Durability in Oxygen Evolution Reaction.

Multimetallic electrocatalysts have shown great potential to improve electrocatalytic performance, but their deteriorations in activity and durability are yet to be overcome. Here, metal-organic fragments with adhesive excipient to realize high activity with good durability in oxygen evolution reaction (OER) are developed. First, a leaf-like zeolitic-imidazolate framework (ZIF-L) is synthesized. Then, ionized species in hydrogen plasma attack preferentially the organic linkers of ZIF-L to derive cobalt-imidazole fragments (CIFs) as adhesive excipient, while they are designed to retain the coordinated cobalt nodes. Moreover, the vacant coordination sites at cobalt nodes and the unbound nitrogen at organic linkers induce high porosity and conductivity. The CIFs serve to stably impregnate trimetallic FeNiMo electrocatalysts (CIF:FeNiMo), and CIF:FeNiMo containing Fe contents of 22% and hexavalent Mo contents show to enable high activity with low overpotentials (203 mV at 10 mA cm-2 and 238 mV at 100 mA cm-2 ) in OER. The near O K-edge extended X-ray absorption fine structure proves further that high activity for OER originates from the partially filled eg orbitals. Additionally, CIF:FeNiMo exhibit good durability, as demonstrated by high activity retention during at least 45 days in OER.

Highly Stable Bulk Perovskite for Blue LEDs with Anion-Exchange Method.

To date, the light emitting diode (LED) based halide perovskite was rapidly developed due to the outstanding property of perovskite materials. However, the blue perovskite LEDs based on the bulk halide perovskites have been rarely researched and showed low efficiencies. The bulk blue perovskite LEDs suffered from insufficient coverage on the substrate due to the low solubility of the inorganic Cl sources or damaged by the structural instability with participation of organic cations. Here, we show the new method of fabricating stable inorganic bulk blue perovskite LEDs with the anion exchange approach to avoid use of insoluble Cl precursors. The devices showed nice operational spectral stability at the desired blue emission peak. The bulk perovskite blue LEDs showed a maximum luminance of 1468 and 494 cd m-2 for the 490 and 470 nm emission peaks, respectively.

Design and Characterization of Elastic Artificial Skin Containing Adenosine-Loaded Solid Lipid Nanoparticles for Treating Wrinkles.

Adenosine (AD), which is used for treating wrinkles, exhibits poor skin permeation. The aim of the present study was to develop a cross-linked silicone-based cellulose elastomer as an elastic artificial skin for the treatment of skin wrinkles, a biocompatible lipid-based nano-carrier for enhancing the skin permeation of AD, and a formulation consisting of the lipid-based carrier incorporated in the elastic artificial skin. AD-loaded solid lipid nanoparticles (SLNs) were prepared using a double-emulsion method. Particle characteristics and mechanical properties of SLNs and elastic artificial skin, respectively, were assessed. Skin permeation was evaluated using SkinEthic RHE tissue, a reconstructed human epidermis model. The mean particle size and zeta potential for SLNs ranged from 123.57 to 248.90 nm and -13.23 to -41.23 mV, respectively. The components of neither SLNs nor the elastic artificial skin were cytotoxic, according to cell- and tissue-viability assays and EU classification. SLNs and the elastic artificial skin exhibited sustained drug release for 48 h. The amount of AD released from SLNs and elastic artificial skin was approximately 10 times and 5 times higher, respectively, than that from AD solution. Therefore, elastic artificial skin incorporated with AD-loaded SLNs may serve as a promising topical delivery system for cosmeceutical treatment of skin wrinkles.

Origin of the luminescence spectra width in perovskite nanocrystals with surface passivation.

Though halide perovskite nanocrystal (PeNC) based blue light emitting devices have been improved in the last few years, and the reasons for the improvements have been successfully explained, the origin of the narrow emission spectra of PeNCs have not been studied much. Here, the factors that affect the width of the emission spectra of PeNCs are analyzed with controlled synthesis and surface passivation treatment. The overall spectra are governed by the size of PeNCs; however, the width could be narrowed by surface passivation treatment. The anion passivation effect of the surface passivation improved most of optoelectronic properties, but had less effect on the emission spectra width. The narrower emission spectra of PeNCs are obtained by ligand passivation effect of the surface passivation. Light emitting devices with enhanced optoelectronic properties are successfully fabricated and narrow (0.094 eV, 16.72 nm) blue electroluminescence emission spectra (∼470 nm) are obtained.

Functionalized PFN-X (X = Cl, Br, or I) for Balanced Charge Carriers of Highly Efficient Blue Light-Emitting Diodes.

All-inorganic perovskite nanocrystals (PeNCs), CsPbX3 (X = Cl, Br, or I), have been considered as one of the prospective emissive materials for display applications, which showed superior photoluminescence quantum yield and high color purity with narrow spectral line width. Recently, high-performance green and red perovskite light-emitting diodes (PeLEDs) were introduced; however, the efficiency of blue PeLEDs still lagged owing to PeNCs' deep HOMO energy level (∼6.0 eV), which is in discord with the adjacent organic interlayer. In this work, we demonstrated an interfacial engineering strategy with conjugated polyelectrolytes, functionalized PFN (poly[(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)]) with halide anions, between the hole injection layer and PeNCs. By introducing PFN-X (X = Cl, Br, or I), they exhibit well-balanced charge carriers and resultant effective radiative recombination in the PeNC layer with reduced hole injection barrier and electron blocking behavior. Among them, in particular, the PFN-Cl-treated PeLEDs display a maximum external quantum efficiency of 1.34% at 470 nm electroluminescence emission with enhanced spectral operating stability.

Generic Strategy to Synthesize High-Tap Density Anode and Cathode Structures with Stratified Graphene Pliable Pockets via Monomeric Polymerization and Evaporation, and Their Utilization to Enable Ultrahigh Performance in Hybrid Energy Storages.

Hybrid energy storage systems have shown great promise for many applications; however, achieving high energy and power densities with long cycle stability remains a major challenge. Here, a strategy to synthesize high-tap density anode and cathode structures that yield ultrahigh performance in hybrid energy storage is reported. First, vinyl acetate monomers are polymerized into molecular sizes via chain reactions controlled by the surface free radicals of graphene and metals. Subsequently, molecular-size polymers are thermally evaporated to construct battery-type anode structures with encapsulated tin metals for high-capacity and stratified graphene pliable pockets (GPPs) for fast charge transfer. Similarly, sulfur particles are attached to GPPs via monomeric polymerization, and capacitor-type hollow GPP (H@GPP) cathode structures are produced by evaporating sulfur, where sublimated S particles yield mesopores for rapid anion movement and micropores for high capacity. Moreover, hybrid full-cell devices with high-tap density anodes and cathodes show high gravimetric energy densities of up to 206.9 Wh kg-1 , exceeding those of capacitors by ≈16-fold, and excellent volumetric energy densities of up to 92.7 Wh L-1 . Additionally, they attain high power densities of up to 23 678 W kg-1 , outperforming conventional devices by a factor of ≈100, and long cycle stability over 10 000 cycles.