Microstructural characterization and inductively coupled plasma-reactive ion etching resistance of Y2O3-Y4Al2O9 composite under CF4/Ar/O2 mixed gas conditions.

In the semiconductor manufacturing process, when conducting inductively coupled plasma-reactive ion etching in challenging environments, both wafers and the ceramic components comprising the chamber's interior can be influenced by plasma attack. When ceramic components are exposed to long-term plasma environments, the eroded components must be replaced. Furthermore, non-volatile reactants can form and settle on semiconductor chips, acting as contaminants and reducing semiconductor production yield. Therefore, for semiconductor processing equipment parts to be utilized, it is necessary that they exhibit minimized generation of contaminant particles and not deviate significantly from the composition of conventionally used Al2O3 and Y2O3; part must also last long in various physicochemical etching environment. Herein, we investigate the plasma etching behavior of Y2O3-Y4Al2O9 (YAM) composites with a variety of mixing ratios under different gas fraction conditions. The investigation revealed that the etching rates and changes in surface roughness for these materials were significantly less than those of Y2O3 materials subjected to both chemical and physical etching. Microstructure analysis was conducted to demonstrate the minimization of crater formation. Mechanical properties of the composite were also analyzed. The results show that the composite can be commercialized as next-generation ceramic component in semiconductor processing equipment applications.

Controlling the Phase Transformation of Alumina for Enhanced Stability and Catalytic Properties.

Current transition alumina catalysts require the presence of significant amounts of toxic, environmentally deleterious dopants for their stabilization. Herein, we report a simple and novel strategy to engineer transition aluminas to withstand aging temperatures up to 1200 °C without inducing the transformation to low-surface-area α-Al2O3 and without requiring dopants. By judiciously optimizing the abundance of dominant facets and the interparticle distance, we can control the temperature of the phase transformation from θ-Al2O3 to α-Al2O3 and the specific surface sites on the latter. These specific surface sites provide favorable interactions with supported metal catalysts, leading to improved metal dispersion and greatly enhanced catalytic activity for hydrocarbon oxidation. The results presented herein not only provide molecular-level insights into the critical factors causing deactivation and phase transformation of aluminas but also pave the way for the development of catalysts with improved activity for catalytic hydrocarbon oxidation.

Poly Lactic-co-Glycolic Acid Absorbable Plate Graft for Secondary Rhinoplasty in Asian Patients with Unilateral Cleft Lip Nose Deformity.

INTRODUCTION: In secondary cleft lip and nasal deformity (CLND) correction, structural grafts are commonly used to control the nasal tip and restore the symmetry of the ala. However, the septal cartilage in Asians often weak and small. Biocompatible absorbable materials are alternatives to autologous grafts. This study assessed the surgical outcomes and complications of poly lactic-co-glycolic acid (PLGA) plate grafts in secondary CLND correction. METHODS: This study was retrospectively analyzed for patients who underwent secondary rhinoplasty for unilateral CLND correction between March 2015 and November 2020. Using open rhinoplasty, the PLGA plate was grafted as a columellar strut. Clinical photographs taken at the initial (T0) and follow-up visits (T1: short-term, T2: long-term) were analyzed and anthropometric parameters, such as nostril height and width, dome height, and tip height, were measured. RESULTS: Twenty-four patients were included in this study. The mean T1 and T2 periods were 1.0 ± 0.4 and 15.5 ± 3.1 months, respectively. The nostril height ratio increased from 0.78 ± 0.12 at T0 to 0.88 ± 0.08 at T1 and 0.86 ± 0.09 at T2 (p < 0.001; Relapse ratio -2.6 ± 6.7%). The tip height ratio increased from 0.60 ± 0.07 (T0) to 0.66 ± 0.05 (T2) (Relapse ratio -3.7 ± 3.0%). CONCLUSIONS: The PLGA plate graft provided stable nasal tip projection and alar symmetry without major complications. It can be a good option for patients lacking available septal and concha cartilages or apprehensive of additional scarring.

The Link of COVID-19-Related Beliefs and Information Sources to Ageism: Myth or Reality?

This study aimed to understand ambivalent ageism among younger adults during the pandemic by examining whether younger adults' beliefs around COVID-19 and the sources from which they received COVID-19 information were associated with the intensity of their ageism. For this aim, survey data were collected from individuals ages 18 to 44 between July and September 2021. Multiple hierarchical regression analysis revealed that benevolent ageism was more intense than hostile ageism when two subscales of ambivalent ageism-benevolent and hostile-were compared. Hispanic or Latinx respondents showed less intense ambivalent ageism than non-Hispanic and non-Latinx respondents. The respondents' beliefs about safety measures and the prioritization of medical resources were significantly associated with the intensity of their ageism. Receiving COVID-19 information via traditional media and social media was also significantly associated with more intense ageism. These findings indicate that social work advocacy should continue to combat ageism in times of crisis.

Engagement of CD300c by a novel monoclonal antibody induces the differentiation of monocytes to M1 macrophages.

Human CD300c is expressed on various immune or cancer cells and is a novel B7 family member, functioning as an activity modulator on immune cells. To elucidate the function of CD300c, we developed CL7, a human CD300c-specific monoclonal antibody, and assessed its biological activity. The specific binding of CL7 monoclonal antibody against recombinant CD300c antigen was confirmed using enzyme-linked immunosorbent assay and surface plasmon resonance analysis. The binding affinity of CL7 was strong at the sub-nanomolar level. Furthermore, CL7 effectively bound to exogenously expressed CD300c on 293T cells. CL7 antibody differentiated monocytes to M1 macrophages, as evidenced by the upregulated expression of M1-specific cell surface markers and increased secretion of M1-specific cytokines in vitro in THP-1 cells and primary macrophages, as well as the increased population size of M1 macrophages in tumors grafted into mice. Additionally, CL7 treatment upregulated PD-L1 expression on THP-1 cells. We confirmed that the mechanism of M1 macrophage differentiation was through the mitogen-activated protein kinase and NF-κB signaling pathways. CD300c expression on various immune and cancer cells was similar to that of the well-known immune checkpoint PD-L1, suggesting the possibility of CD300c as a novel tumor biomarker. We also confirmed that the tumor size was substantially reduced by CL7 antibody treatment in the CT26 mouse model. Our study supports that CD300c is a potential therapeutic target in immuno-oncology. Overall, the CD300c-specific monoclonal antibody, CL7, is a promising immunotherapeutic agent, and it induces enhanced differentiation of M1 macrophages and/or their infiltration into the tumor microenvironment.

Advancements in 2D and 3D In Vitro Models for Studying Neuromuscular Diseases.

Neuromuscular diseases (NMDs) are a genetically or clinically heterogeneous group of diseases that involve injury or dysfunction of neuromuscular tissue components, including peripheral motor neurons, skeletal muscles, and neuromuscular junctions. To study NMDs and develop potential therapies, remarkable progress has been made in generating in vitro neuromuscular models using engineering approaches to recapitulate the complex physical and biochemical microenvironments of 3D human neuromuscular tissues. In this review, we discuss recent studies focusing on the development of in vitro co-culture models of human motor neurons and skeletal muscles, with the pros and cons of each approach. Furthermore, we explain how neuromuscular in vitro models recapitulate certain aspects of specific NMDs, including amyotrophic lateral sclerosis and muscular dystrophy. Research on neuromuscular organoids (NMO) will continue to co-develop to better mimic tissues in vivo and will provide a better understanding of the development of the neuromuscular tissue, mechanisms of NMD action, and tools applicable to preclinical studies, including drug screening and toxicity tests.

Genetic modification regulates pathogenicity of a fowl adenovirus 4 strain after cell line adaptation (genetic mutation in FAdV-4 lowered pathogenicity).

Fowl adenovirus 4 (FAdV-4) is a major avian virus that induces fatal diseases in chicken such as, hydropericardium and hepatitis. The viral structure consists of hexon, penton, fiber-1, and fiber-2 which are associated with immunopathogenesis. In this study, we investigated the genetic modification of a FAdV-4 strain after continuous passages in a cell line and evaluated the pathogenicity associated with mutations. We used the FadV-4 KNU14061 strain, which was isolated from layers in 2014. The virus went through 80 passages in the Leghorn male hepatoma (LMH) cell line. The full genetic sequence was identified, and we found a frameshift in the fiber-2 amino acid sequence after the initial thirty passages. To examine whether the frameshift in the fiber-2 gene affects the pathogenicity in chicken, we inoculated LMH80 (80 times passaged) and LMH10 (10 times passaged) into 3-day-old chickens and examined the pathogenesis. LMH10 infection via intramuscular route induced fatal pathology, but LMH80 did not. Furthermore, LHM80 pre-treatment protected hosts from the LMH10 challenge. Thus, the genetic modification isolated by serial passage lowered pathogenicity and the resulting virus acted as an attenuated vaccine that can be a FAdV-4 vaccine strain candidate.

Hufsiella ginkgonis gen. nov., sp. nov. and Hufsiella arboris sp. nov., isolated from tree barks.

Two Gram-staining-negative, aerobic, rod-shaped, bacteria that formed pale-pinkish colonies, designated HMF7056T and HMF7647T were isolated from Ginkgo (Ginkgo biloba) and Korean cornel dogwood (Cornus offcinalis), respectively. Phylogenetic analyses based on sequences of 16S rRNA genes and 92 core genes indicated that two strains represent novel species within the family Sphingobacteriaceae. HMF7056T and HMF7647T showed high 16S rRNA sequence similarities to Daejeonella lutea N7d-4T (93.9 % and 95.7 %, respectively). The genomes of HMF7056T and HMF7647T were 5.2 and 4.8 Mbp in size with 50.5 and 42.5 % DNA G+C contents, respectively. Menaquinone-7 was the main respiratory quinone. The predominant fatty acids of HMF7056T and HMF7647T were iso-C15 : 0 and summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c). The major polar lipid of both strains was phosphatidylethanolamine. The average nucleotide identity and digital DNA-DNA hybridization values of HMF7056T, HMF7647T and related species were well below the threshold limit for species delineation (<68.9 and <20.8 %, respectively). The average amino acid identity values of HMF7056T, HMF7647T with related type strains were below 67.8 and 68.3 %, respectively. On the basis of the results of phenotypic and phylogenetic characterizations, the two strains are considered to represent members of a novel genus of the family Sphingobacteriaceae, for which the names Hufsiella ginkgonis gen. nov., sp. nov. and Hufsiella arboris sp. nov. are proposed. The type strains are HMF7056T (=KCTC 72282T =NBRC 113964T) and HMF7647T (=KCTC 72283T =NBRC 113965T), respectively.

Ultrasonographic assessment of rectus abdominis muscle adaptation after deep inferior epigastric artery perforator (DIEP) flap surgery: Single institution retrospective study.

The impact of deep inferior epigastric artery perforator (DIEP) flap on abdominal wall integrity has been the topic of an ongoing debate with previous studies having reported conflicting results using various imaging modalities. Ultrasonography is a noninvasive, cost-effective, and readily available method for evaluating the changes to the rectus muscle after DIEP flap surgery. In the present study, we aimed to compare rectus abdominis muscle thickness between the operated and non-operated sides using ultrasound imaging. The muscle thickness was measured at the cross point of the midclavicular line and the level of the umbilicus and anterior superior iliac spine using real-time B-mode ultrasonography. The muscle anteroposterior diameters of the pedicle-dissected side and the control side were compared using paired t test. In total 31 patients with a mean follow-up of 70.18 weeks were included. The mean diameters at the level of the umbilicus of the operated and non-operated sides were 8.16 ±â€…1.83 and 8.14 ±â€…1.43 mm, respectively (P = .94). The mean thicknesses at the anterior superior iliac spine level were 7.74 ±â€…1.85 on the flap harvested side and 8.04 ±â€…1.84 mm on the control side (P = .35). There was no statistically significant difference between the 2 groups. Ultrasonography can be a reliable, inexpensive, and easily usable modality for evaluating donor site complication following DIEP flap. DIEP flap seems to have minimal impact on the abdominal donor site, and it may be safe and versatile to reconstruct the breast after mastectomy.

Study on ZrSi2 as a Candidate Material for Extreme Ultraviolet Pellicles.

An extreme ultraviolet (EUV) pellicle is an ultrathin membrane at a stand-off distance from the reticle surface that protects the EUV mask from contamination during the exposure process. EUV pellicles must exhibit high EUV transmittance, low EUV reflectivity, and superior thermomechanical durability that can withstand the gradually increasing EUV source power. This study proposes an optimal range of optical constants to satisfy the EUV pellicle requirements based on the optical simulation results. Based on this, zirconium disilicide (ZrSi2), which is expected to satisfy the optical and thermomechanical requirements, was selected as the EUV pellicle candidate material. An EUV pellicle composite comprising a ZrSi2 thin film deposited via co-sputtering was fabricated, and its thermal, optical, and mechanical properties were evaluated. The emissivity increased with an increase in the thickness of the ZrSi2 thin film. The measured EUV transmittance (92.7%) and reflectivity (0.033%) of the fabricated pellicle satisfied the EUV pellicle requirements. The ultimate tensile strength of the pellicle was 3.5 GPa. Thus, the applicability of the ZrSi2 thin film as an EUV pellicle material was verified.

Biochemical and biophysical characterization of the RAS family small GTPase protein DiRAS3.

DiRAS3, also called ARHI, is a RAS (sub)family small GTPase protein that shares 50-60% sequence identity with H-, K-, and N-RAS, with substitutions in key conserved G-box motifs and a unique 34 amino acid extension at its N-terminus. Unlike the RAS proto-oncogenes, DiRAS3 exhibits tumor suppressor properties. DiRAS3 function has been studied through genetics and cell biology, but there has been a lack of understanding of the biochemical and biophysical properties of the protein, likely due to its instability and poor solubility. To overcome this solubility issue, we engineered a DiRAS3 variant (C75S/C80S), which significantly improved soluble protein expression in E. coli. Recombinant DiRAS3 was purified by Ni-NTA and size exclusion chromatography (SEC). Concentration dependence of the SEC chromatogram indicated that DiRAS3 exists in monomer-dimer equilibrium. We then produced truncations of the N-terminal (ΔN) and both (ΔNC) extensions to the GTPase domain. Unlike full-length DiRAS3, the SEC profiles showed that ΔNC is monomeric while ΔN was monomeric with aggregation, suggesting that the N and/or C-terminal tail(s) contribute to dimerization and aggregation. The 1H-15N HSQC NMR spectrum of ΔNC construct displayed well-dispersed peaks similar to spectra of other GTPase domains, which enabled us to demonstrate that DiRAS3 has a GTPase domain that can bind GDP and GTP. Taken together, we conclude that, despite the substitutions in the G-box motifs, DiRAS3 can switch between nucleotide-bound states and that the N- and C-terminal extensions interact transiently with the GTPase domain in intra- and inter-molecular fashions, mediating weak multimerization of this unique small GTPase.

Effects of rainfall and temperature on background signal of radiation portal monitor.

For homeland security, radiation portal monitors (RPMs) have been widely used to detect illegal radioactive materials at seaports, airports, nuclear facilities and other highly secured establishments. In general, commercial RPMs are based on a large plastic (i.e. PVT-polyvinyl toluene) scintillator detector and the associated electronics. In order to detect radioactive materials passing through the RPM, the alarm criterion should be set according to the background level, which depends on the operating location due to not only composition differences in soil and rocks but also weather variation (i.e. rainfall and temperature). It is well known that RPM background signal level increases with rainfall and that the PVT signal depends on the temperature due to scintillation light yield variation. In this study, the background signal level of two commercial RPMs (models: 4525-3800 and 7000, Ludlum), both of which are installed and operated at the Incheon and Donghae ports in Korea, was analysed by reference to a 3-year database of minute-to-minute RPM background signals and a rainfall-and-temperature database provided by the Korea Meteorological Administration (KMA). In terms of rainfall, the variation of the background signal level was examined with reference to the amount of rainfall. The averaged variation in the background signal level, which was as high as ~20% as a function of the amount of rainfall, was found to be dependent on a region's specific concentration of 222Rn in the atmosphere. In terms of temperature, the background signal level varied by ~4.7% within the temperature range of -5 to 30°C for the four studied sites (i.e. two sites per region for the Incheon and Donghae regions). Knowledge of the dependency of RPM background signal level on rainfall amount and temperature could be used to achieve more realistic estimation of the background radiation level for optimising commercial RPMs' alarm criteria.

Understanding of Active Sites and Interconversion of Pd and PdO during CH4 Oxidation.

Pd-based catalysts are widely used in the oxidation of CH4 and have a significant impact on global warming. However, understanding their active sites remains controversial, because interconversion between Pd and PdO occurs consecutively during the reaction. Understanding the intrinsic active sites under reaction conditions is critical for developing highly active and selective catalysts. In this study, we demonstrated that partially oxidized palladium (PdOx) on the surface plays an important role for CH4 oxidation. Regardless of whether the initial state of Pd corresponds to oxides or metallic clusters, the topmost surface is PdOx, which is formed during CH4 oxidation. A quantitative analysis using CO titration, diffuse reflectance infrared Fourier-transform spectroscopy, X-ray diffraction, and scanning transmission electron microscopy demonstrated that a surface PdO layer was formed on top of the metallic Pd clusters during the CH4 oxidation reaction. Furthermore, the time-on-stream test of CH4 oxidation revealed that the presence of the PdO layer on top of the metallic Pd clusters improves the catalytic activity. Our periodic density functional theory (DFT) calculations with a PdOx slab and nanoparticle models aided the elucidation of the structure of the experimental PdO particles, as well as the experimental C-O bands. The DFT results also revealed the formation of a PdO layer on the metallic Pd clusters. This study helps achieve a fundamental understanding of the active sites of Pd and PdO for CH4 oxidation and provides insights into the development of active and durable Pd-based catalysts through molecular-level design.

A systematic exploration of ginsenoside Rg5 reveals anti-inflammatory functions in airway mucosa cells.

Background: Hyperactivated airway mucosa cells overproduce mucin and cause severe breathing complications. Here, we aimed to identify the effects of saponins derived from Panax ginseng on inflammation and mucin overproduction. Methods: NCI-H292 cells were pre-incubated with 16 saponins derived from P. ginseng, and mucin overproduction was induced by treatment with phorbol 12-myristate 13-acetate (PMA). Mucin protein MUC5AC was quantified by enzyme-linked immunosorbent assay, and mRNA levels were analyzed using quantitative polymerase chain reaction (qPCR). Moreover, we performed a transcriptome analysis of PMA-treated NCI-H292 cells in the absence or presence of Rg5, and differential gene expression was confirmed using qPCR. Phosphorylation levels of signaling molecules, and the abundance of lipid droplets, were measured by western blotting, flow cytometry, and confocal microscopy. Results: Ginsenoside Rg5 effectively reduced MUC5AC secretion and decreased MUC5AC mRNA levels. A systematic functional network analysis revealed that Rg5 upregulated cholesterol and glycerolipid metabolism, resulting in the production of lipid droplets to clear reactive oxygen species (ROS), and modulated the mitogen-activated protein kinase and nuclear factor (NF)-κB signaling pathways to regulate inflammatory responses. Rg5 induced the accumulation of lipid droplets and decreased cellular ROS levels, and N-acetyl-l-cysteine, a ROS inhibitor, reduced MUC5AC secretion via Rg5. Furthermore, Rg5 hampered the phosphorylation of extracellular signal-regulated kinase and p38 proteins, affecting the NF-κB signaling pathway and pro-inflammatory responses. Conclusion: Rg5 alleviated inflammatory responses by reducing mucin secretion and promoting lipid droplet-mediated ROS clearance. Therefore, Rg5 may have potential as a therapeutic agent to alleviate respiratory disorders caused by hyperactivation of mucosa cells.

Coiled-coil structure mediated inhibition of the cytotoxic huntingtin amyloid fibrils by an IP3 receptor fragment.

Disruption of cellular homeostasis by the aggregation of polyglutamine (polyQ) in the huntingtin protein (Htt) leads Huntington's disease (HD). Effective drugs for treating HD have not been developed, as the molecular mechanism underlying HD pathogenesis remains unclear. To develop strategies for inhibiting HD pathogenesis, the intermolecular interaction of Htt with IP3 receptor 1 (IP3R1) was investigated. Peptide (termed ICT60) corresponding to a coiled-coil motif in the C-terminus of IP3R1 was designed. Several biophysical approaches revealed the strong and specific binding of ICT60 to the N-terminal part of HttEx1. ICT60 inhibited not only amyloid formation by HttEx1, but also the cytotoxicity and cell-penetration ability of the amyloid fibrils of HttEx1. The importance of coiled-coil structure was verified by charge-manipulated variants. The coiled-coil structures of ICT60-KK and -EE were partially and largely disrupted, respectively. ICT60 wild-type and -KK inhibited amyloid formation by HttEx1-46Q, whereas ICT60-EE did not block amyloidogenesis. Similarly, the cytotoxicity and cell-penetration ability of the amyloid fibrils of HttEx1-46Q were efficiently inhibited by ICT60 wild-type and ICT60-KK, but not by ICT60-EE. We propose a mechanical model explaining how an IP3 receptor-inspired molecule can modulate cytotoxic amyloid formation by Htt, providing a molecular basis for developing therapeutics to treat HD.

Effect of structural variation in the promoter region of RsMYB1.1 on the skin color of radish taproot.

Accumulation of anthocyanins in the taproot of radish is an agronomic trait beneficial for human health. Several genetic loci are related to a red skin or flesh color of radish, however, the functional divergence of candidate genes between non-red and red radishes has not been investigated. Here, we report that a novel genetic locus on the R2 chromosome, where RsMYB1.1 is located, is associated with the red color of the skin of radish taproot. A genome-wide association study (GWAS) of 66 non-red-skinned (nR) and 34 red-skinned (R) radish accessions identified three nonsynonymous single nucleotide polymorphisms (SNPs) in the third exon of RsMYB1.1. Although the genotypes of SNP loci differed between the nR and R radishes, no functional difference in the RsMYB1.1 proteins of nR and R radishes in their physical interaction with RsTT8 was detected by yeast-two hybrid assay or in anthocyanin accumulation in tobacco and radish leaves coexpressing RsMYB1.1 and RsTT8. By contrast, insertion- or deletion-based GWAS revealed that one large AT-rich low-complexity sequence of 1.3-2 kb was inserted in the promoter region of RsMYB1.1 in the nR radishes (RsMYB1.1nR), whereas the R radishes had no such insertion; this represents a presence/absence variation (PAV). This insertion sequence (RsIS) was radish specific and distributed among the nine chromosomes of Raphanus genomes. Despite the extremely low transcription level of RsMYB1.1nR in the nR radishes, the inactive RsMYB1.1nR promoter could be functionally restored by deletion of the RsIS. The results of a transient expression assay using radish root sections suggested that the RsIS negatively regulates the expression of RsMYB1.1nR, resulting in the downregulation of anthocyanin biosynthesis genes, including RsCHS, RsDFR, and RsANS, in the nR radishes. This work provides the first evidence of the involvement of PAV in an agronomic trait of radish.

Comparison of Jaw Mode and Field Width for Left-Breast Cancer Using TomoDirect Three-Dimensional Conformal Radiation Therapy: A Phantom Study.

It is very important to use effective parameters in the treatment plan of breast cancer patients in TomoDirect (TD)-three-dimensional conformal radiation therapy (TD-3DCRT). The objective of this study was to compare the radiation treatment plans to the parameters (jaw width and jaw mode) of TD-3DCRT for left-breast cancer. This study was conducted using the phantom, the jaw mode (fixed and dynamic) and field width (2.5 cm and 5.0 cm) were controlled to compare the TD-3DCRT treatment plans. There was small difference in the conformity index (CI) and homogeneity index (HI) values for target according to the jaw mode for each field width. As a result of observation in terms of dose, treatment time and unnecessary damage to surrounding normal organs could be minimized when dynamic jaw with a field width of 5.0 cm was used. In conclusion, we verified that the use of dynamic jaws and 5.0 cm field width was effective in left-breast cancer radiotherapy plan using TD-3DCRT.

Lithium sensors based on photophysical changes of 1-aza-12-crown-4 naphthalene derivatives synthesized via Buchwald-Hartwig amination.

Lithium detection is of great significance in many applications. Lithium-sensing compounds with high selectivity are scarce and, if any, complicated to synthesize. We herein report a novel yet simple compound that can detect lithium ions in an organic solvent through changes in absorbance and fluorescence. Naphthalene functionalized with 1-aza-12-crown-4 (1) was synthesized via one step from commercially available 1-bromonaphthalene through Buchwald-Hartwig amination. In order to obtain a structure-property relationship, we also synthesized two other compounds that are structurally similar to 1, wherein the compounds 2 and 3 include an imide moiety (an electron acceptor) and do not include a 1-aza-12-crown-4 unit, respectively. Upon the addition of lithium ions, compound 1 displayed a clear isosbestic point in the absorption spectra and a new peak in the fluorescence spectra, whereas the compounds 2 and 3 indicated miniscule and no spectroscopic changes, respectively. 1H NMR titration studies and the calculated optimized geometry from density functional theory (DFT) indicated the lithium binding on the aza-crown. The calculated limit of detection (LOD) was 21 µM. The lithium detection with 1 is selective among other alkali metals (Na+, K+, and Cs+). DFT calculation indicated that the lone pair electrons in the nitrogen atom of 1 is delocalized yet available to bind lithium, whereas the nitrogen lone pair electrons of 2 showed significant intramolecular charge transfer to the imide acceptor, resulting in a high dipole moment, and thus were unavailable to bind lithium. This work elucidates the key design parameters for future lithium sensors.

Mucilaginibacter rivuli sp. nov., isolated from a water rivulet.

Strain HMF5004T was isolated from a rivulet located in Yongin, Republic of Korea. Phylogenetic analyses based on 16S rRNA gene sequences showed that strain HMF5004T belonged to the genus Mucilaginibacter. Strain HMF5004T was closely related to Mucilaginibacter paludis (97.7%) and Mucilaginibacter gracilis (97.2%). The values of average nucleotide identity and digital DNA-DNA hybridization between strain HMF5004T and M. paludis were 72.8 and 19.2 %, respectively. Cells of strain HMF5004T were Gram-stain-negative, rod-shaped, non-motile, catalase-positive and oxidase-positive. The DNA G+C content of strain HMF5004T was 42.4 mol%. Strain HMF5004T had menaquinone-7 as a major quinone. The major cellular fatty acids included iso-C15 : 0, summed feature 3 (C16 : 1 ω7c and/or C16 : 1 ω6c) and anteiso-C15 : 0. The polar lipids of strain HMF5004T contained phosphatidylethanolamine, five unidentified aminolipids, one unidentified aminophospholipid and four unidentified polar lipids. On the basis of the evidence presented in this polyphasic taxonomic study, strain HMF5004T is considered to represent a novel species for which the name Mucilaginibacter rivuli sp. nov. is proposed. The type strain is HMF5004T (=KCTC 82633T=NBRC 115091T).

Deinococcus betulae sp. nov. and Deinococcus arboris sp. nov., novel bacteria isolated from bark of birch tree (Betula platyphylla).

Two reddish-coloured bacterial strains (HMF7604T and HMF7620T) were isolated from bark of birch tree (Betula platyphylla) together with two strains (designed as HMF7603 and HMF7618). Cells were observed to be Gram-stain-negative, oval- to short rod-shaped and non-motile. Phylogenetic analysis based on 16S rRNA gene sequences indicated that the four isolates belonged to the genus Deinococcus, family Deinococcaceae. They had the highest similarities (95.4-95.6 %) to Deinococcus multiflagellatus ID1504T, with which they formed a clade in phylogenetic trees. Menaquinone-8 was the only respiratory quinone. The predominant fatty acids were summed feature 3 (C16 : 1 ω7c and/or C16 : 1 ω6c), C15 : 1 ω6c, C17 : 0 and C16 : 0. Strain HMF7604T contained two unidentified phosphoglycolipids, nine unidentified glycolipids, one unidentified aminolipid, three unidentified phospholipids and three unidentified polar lipids, while strain HMF7620T contained one unidentified phosphoglycolipid, four unidentified glycolipids, one unidentified aminophospholipid, one unidentified phospholipid and one unidentified polar lipid. The DNA G+C contents of strains HMF7604T and HMF7620T were 65.6 and 65.7 mol%, respectively. The average nucleotide identity and digital DNA-DNA hybridization values between the two isolates and their close relative D. multiflagellatus were 81.1-95.3 and 24.5-61.6 %, respectively. Based on the results of phenotypic and phylogenetic characterizations, the four isolates are considered to represent two novel species of the genus Deinococcus, for which the names Deinococcus betulae sp. nov. and Deinococcus arboris sp. nov. are proposed. The type strains are HMF7604T (=KCTC 43354T=NBRC 115489T) and HMF7620T (=KCTC 43051T=NBRC 113959T).