Synthesis of Isoamyl Fatty Acid Ester, a Flavor Compound, by Immobilized Rhodococcus Cutinase.

Isoamyl fatty acid esters (IAFEs) are widely used as fruity flavor compounds in the food industry. In this study, various IAFEs were synthesized from isoamyl alcohol and various fatty acids using a cutinase enzyme (Rcut) derived from Rhodococcus bacteria. Rcut was immobilized on methacrylate divinylbenzene beads and used to synthesize isoamyl acetate, butyrate, hexanoate, octanoate, and decanoate. Among them, Rcut synthesized isoamyl butyrate (IAB) most efficiently. Docking model studies showed that butyric acid was the most suitable substrate in terms of binding energy and distance from the active site serine (Ser114) γ-oxygen. Up to 250 mM of IAB was synthesized by adjusting reaction conditions such as substrate concentration, reaction temperature, and reaction time. When the enzyme reaction was performed by reusing the immobilized enzyme, the enzyme activity was maintained at least six times. These results demonstrate that the immobilized Rcut enzyme can be used in the food industry to synthesize a variety of fruity flavor compounds, including IAB.

Synthesis of New Multifunctional Linolenic Acid Vanillyl Ester and Investigation of Antioxidant and Antibacterial Activities.

Vanillyl alcohol (VA) possesses potent antioxidant activity, yet its applicability is hindered by its limited solubility in emulsions or non-polar organic solvents. Conversely, long-chain polyunsaturated fatty acids exhibit antibacterial properties. The combination of these compounds offers the prospect of developing novel phenolic lipid compounds with dual antioxidant and antibacterial activities, alongside enhanced solubility capabilities. In this investigation, linolenic acid vanillyl ester (LAVE) was synthesized from VA and linseed oil (LO) through a transesterification reaction employing immobilized lipase. Optimization of LAVE production was achieved by varying reaction temperature, substrate concentration, and reaction time. LAVE demonstrated efficacy in scavenging both 2,2-diphenyl-1-picryhydrazyl and 2,2'-azino-bis (3-ethylbenthiazoline-6-sulphonic acid) radicals in organic solvents. Antioxidant testing via lipid oxidation analysis revealed that LAVE, when distributed within emulsions, effectively impeded the formation of conjugated dienes and conjugated trienes. Furthermore, LAVE exhibited antibacterial activity against four strains of spoilage bacteria: Bacillus subtilis, Bacillus coagulans, Pseudomonas fluorescens, and Alcaligenes faecalis. Zeta potential analysis substantiated the binding of LAVE to the bacterial cell surface. Propidium iodide uptake assay and fluorescence microscopy further elucidated that LAVE induces cell lysis by augmenting membrane permeability.

Production of octyl butyrate using psychrophilic mutant lipase from Croceibacter atlanticus LipCA lipase developed by a molecular evolution technique.

Lipases are used to synthesize a variety of industrially useful compounds. Among them, psychrophilic lipase can be used to synthesize thermo-labile compounds at low temperatures. In this study, random mutagenesis was introduced into Antarctic Croceibacter atlanticus lipase gene using error-prone PCR, resulting in changes in its protein sequence. Through two rounds of mutagenesis and screening, we found that a mutant R1 showed an enhanced activity at low temperatures. Mutant R1 had five mutations (F43L, S48G, S49G, D141K, and K297R) and higher kcat/KM value than the wild type (WT) at 10 °C. We immobilized this enzyme on methacrylate divinylbenzene resin and used it to synthesize octyl butyrate, a flavor compound. The esterification reaction proceeded even at 10 °C. Mutant R1 synthesized the ester compound faster than the WT. To determine which amino acids were responsible for the increase of activity, site-directed mutagenesis was performed to introduce five back mutations into mutant R1. Three back mutants (L43F, G48S, G49S) showed significant decreases of activity at low temperatures, indicating that these amino acids were closely related to the increase in activity. This psychrophilic mutant R1 is expected to be used in low-temperature enzyme conversion reactions in the food industry.

Cloning and characterization of an acidic lipase from a lipolytic bacterium in tempeh.

BACKGROUND: Lipases have emerged as essential biocatalysts, having the ability to contribute to a wide range of industrial applications. Microbial lipases have garnered significant industrial attention due to their stability, selectivity, and broad substrate specificity. In the previous study, a unique lipolytic bacterium (Micrococcus luteus EMP48-D) was isolated from tempeh. It turns out the bacteria produce an acidic lipase, which is important in biodiesel production. Our main objectives were to clone the acidic lipase and investigate its potential in biodiesel production. RESULT: In this study, the gene encoding a lipase from M. luteus EMP48-D was cloned and expressed heterologously in Escherichia coli. To our knowledge, this is the first attempt at the cloning and expression of the lipase gene from Micrococcus luteus. The amino acid sequence was deduced from the nucleotide sequence (1356 bp) corresponded to a protein of 451 amino acid residues with a molecular weight of about 40 kDa. The presence of a signal peptide suggested that the protein was extracellular. A sequence analysis revealed that the protein had a lipase-specific Gly-X-Ser-X-Gly motif. The enzyme was identified as an acidic lipase with a pH preference of 5.0. Fatty acid preferences for enzyme activities were C8 and C12 (p-nitrophenyl esters), with optimum temperatures at 30-40 °C and still remaining active at 80°C. The enzyme was also shown to convert up to 70% of the substrate into fatty acid methyl ester. CONCLUSION: The enzyme was a novel acidic lipase that demonstrated both hydrolytic and transesterification reactions. It appeared particularly promising for the synthesis of biodiesel as this enzyme's catalytic reaction was optimum at low temperatures and was still active at high temperatures.

Development of skin-permeable flexible liposome using ergosterol esters containing unsaturated fatty acids.

Ergosterol (Ergo) and cholesterol contribute to performances of liposomes by increasing membrane packing density and physical stability. However, as these sterols can reduce membrane flexibility, they can lower skin permeability of liposomes. We synthesized ergosterol ester (Ergo-Est) containing unsaturated fatty acid different from Ergo in size and physical properties. In this work, we investigated effects of Ergo-Est and Ergo on physical properties of liposomes. We incorporated Ergo, Ergo-oleate (EO18:1), Ergo-linoleate (EL18:2), and Ergo-linolenate (ELn18:3) into the liposomal membrane of egg phosphatidylcholine and soybean lecithin. Ergo-Est did not reduce membrane fluidity as much as Ergo. Nevertheless, Ergo-Est increased membrane packing density and physical stability of liposomes. EL18:2 and ELn18:3 almost maintained membrane flexibility and skin permeability of liposomes, while Ergo significantly reduced them. Skin permeation test demonstrated that EL18:2 and ELn18:3 liposomes permeated to the dermis, whereas Ergo liposome mostly remained in the stratum corneum. This is the first report to show that EL18:2 and ELn18:3 can be efficient sterol compounds for flexible liposome formulation.

Synthesis of Short-Chain Alkyl Butyrate through Esterification Reaction Using Immobilized Rhodococcus Cutinase and Analysis of Substrate Specificity through Molecular Docking.

Alkyl butyrate with fruity flavor is known as an important additive in the food industry. We synthesized various alkyl butyrates from various fatty alcohol and butyric acid using immobilized Rhodococcus cutinase (Rcut). Esterification reaction was performed in a non-aqueous system including heptane, isooctane, hexane, and cyclohexane. As a result of performing the alkyl butyrate synthesis reaction using alcohols of various chain lengths, it was found that the preference for the alcohol substrate had the following order: C6 > C4 > C8 > C10 > C2. Through molecular docking analysis, it was found that the greater the hydrophobicity of alcohol, the higher the accessibility to the active site of the enzyme. However, since the number of torsions increased as the chain length increased, it became difficult for the hydroxyl oxygen of the alcohol to access the γO of serine at the enzyme active site. These molecular docking results were consistent with substrate preference results of the Rcut enzyme. The Rcut maintained the synthesis efficiency at least for 5 days in isooctane solvent. We synthesized as much as 452 mM butyl butyrate by adding 100 mM substrate daily for 5 days and performing the reaction. These results show that Rcut is an efficient enzyme for producing alkyl butyrate used in the food industry.

Production of 4-Ethyl Malate through Position-Specific Hydrolysis of Photobacterium lipolyticum M37 Lipase.

Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50°C and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.

Functional production, characterization, and immobilization of a cold-adapted cutinase from Antarctic Rhodococcus sp.

A lipolytic enzyme (Rcut) was discovered from the Rhodococcusstrain (RosL12) isolated from the Antarctic Ross Sea. The corresponding gene composed of 651 bases encoding 216 amino acids. It was found to be a cutinase gene through BLAST search. Rcut has a signal sequence consisting of 29 amino acids. An active Rcut was produced after the intact gene containing the signal sequence was transformed into Escherichia coli Rosetta-gami™ 2 (DE3) pLysS. Rcut was purified through a nickel-nitrilotriacetic acid purification system and a carboxymethyl Sepharose column chromatography. Its specific activity was 2190 U/mg. Rcut showed the highest activity at 40 °C and had a low activation energy of 3.16 kcal/mol. This means that it is a typical cold-adapted enzyme. Rcut showed high activity towards medium chain fatty acids (C4-C10). Rcut degraded polycaprolactone and polyethylene terephthalate, suggesting that it could be used for decomposition of synthetic plastics causing environmental pollution. Rcut was immobilized on methacrylate-divinyl benzene bead. This immobilized Rcut (immRcut) showed higher thermal stability than the free enzyme. ImmRcut performed transesterification of various esters and ethanol in a non-polar solvent, suggesting that it could be used for the synthesis of industrially useful ester compounds.

Increased mRNA Stability and Expression Level of Croceibacter atlanticus Lipase Gene Developed through Molecular Evolution Process.

In order to use an enzyme industrially, it is necessary to increase the activity of the enzyme and optimize the reaction characteristics through molecular evolution techniques. We used the error-prone PCR method to improve the reaction characteristics of LipCA lipase discovered in Antarctic Croceibacter atlanticus. Recombinant Escherichia coli colonies showing large halo zones were selected in tributyrin-containing medium. The lipase activity of one mutant strain (M3-1) was significantly increased, compared to the wild-type (WT) strain. M3-1 strain produced about three times more lipase enzyme than did WT strain. After confirming the nucleotide sequence of the M3-1 gene to be different from that of the WT gene by four bases (73, 381, 756, and 822), the secondary structures of WT and M3-1 mRNA were predicted and compared by RNAfold web program. Compared to the mean free energy (MFE) of WT mRNA, that of M3-1 mRNA was lowered by 4.4 kcal/mol, and the MFE value was significantly lowered by mutations of bases 73 and 756. Site-directed mutagenesis was performed to find out which of the four base mutations actually affected the enzyme expression level. Among them, one mutant enzyme production decreased as WT enzyme production when the base 73 was changed (T→C). These results show that one base change at position 73 can significantly affect protein expression level, and demonstrate that changing the mRNA sequence can increase the stability of mRNA, and can increase the production of foreign protein in E. coli.

Antioxidant and Antibacterial Activity of Caprylic Acid Vanillyl Ester Produced by Lipase-Mediated Transesterification.

Vanillyl alcohol (VA), which is abundant in Vanilla bean, has strong antioxidant activity. However, the use of VA in the food and cosmetics industries is limited, due to its low solubility in emulsion or organic solvents. Meanwhile, medium chain fatty acids and medium chain monoglycerides have antibacterial activity. We synthesized butyric acid vanillyl ester (BAVE) or caprylic acid vanillyl ester (CAVE) from VA with tributyrin or tricaprylin through transesterification reaction using immobilized lipases. BAVE and CAVE scavenged 2,2-diphenyl-1-picrylhydrazyl radicals in organic solvents. In addition, BAVE and CAVE decreased the production rate of conjugated diene and triene in the menhaden oil-in-water emulsion system. While BAVE showed no antibacterial activity, CAVE showed antibacterial activity against food spoilage bacteria, including Bacillus coagulans. In this study, the antibacterial activity of vanillyl ester with medium chain fatty acid was first revealed. Zeta potential measurements confirmed that BAVE and CAVE were inserted into B. coagulans membrane. In addition, the propidium iodide uptake assay and fluorescent microscopy showed that CAVE increased B. coagulans membrane permeability. Therefore, CAVE is expected to play an important role in the food and cosmetics industries as a bi-functional material with both antioxidant and antibacterial activities.

Antibacterial activity of emulsions containing unsaturated fatty acid ergosterol esters synthesized by lipase-mediated transesterification.

Ergosterol, like cholesterol, has many beneficial physiological activities, and because it has no adverse clinical problem with cholesterol, it is a substance that can be used as a biomaterial in the food and cosmetics industry. However, ergosterol has low oil solubility and is easily crystallized, which is problematic for its direct use in the industry. This problem can be solved by combining fatty acids with ergosterol. In this study, ergosterol derivatives with unsaturated fatty acids were synthesized from ergosterol and various plant oils. Specifically, ergosterol oleate (EO), ergosterol linoleate (EL), and ergosterol linolenate (ELn) were synthesized using Proteus vulgaris K80 lipase. To effectively synthesize these unsaturated fatty acid ergosterol esters (FAEEs), 25 mM ergosterol and 40 mM plant oil were added into hexane solvent, and transesterification reaction was performed at 40 °C. Proteus vulgaris K80 lipase showed higher conversion yield than other commercial lipases, due to its high affinity to ergosterol and broad substrate specificity. Rapeseed oil, sunflower seed oil, and linseed oil were used to synthesize EO, EL, and ELn, respectively. The FAEEs were purified, and their purity was confirmed by FT-IR and LC-MS. The solubility of the FAEEs in a tricaprylin solvent was increased 11-16 times, compared to that of ergosterol. We found that EL- and ELn-containing emulsions had strong growth inhibitory activity against some dairy and cosmetic spoilage bacteria.

Lipase-mediated synthesis of ricinoleic acid vanillyl ester and evaluation of antioxidant and antibacterial activity.

Castor oil extracted from castor bean has antibacterial property, and has been used in various folk remedies. The major structural component of castor oil, ricinoleic acid, has actual antibacterial activity. Some phenolic compounds derived from plants have antioxidant property. Among them, vanillyl alcohol from vanilla bean has strong antioxidant activity. As vanillyl alcohol has low solubility in hydrophobic solvents and castor oil has low solubility in hydrophilic solvents, there is practical difficulty in using them. We performed lipase-mediated transesterification using vanillyl alcohol and castor oil, and synthesized ricinoleic acid vanillyl ester (RAVE). 2,2-Diphenyl-1-picrylhydrazyl assay and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) assay revealed that RAVE had a strong antioxidant activity in various organic solvents. RAVE also had antibacterial activity against some food spoilage bacteria. It showed more powerful antibacterial activity for gram positive bacteria than for gram negative bacteria. The critical micelle concentration of RAVE was measured at 7.36 µM and it partitioned exclusively into emulsion phase in water-emulsion system. Zeta potential measurement, membrane release test, and fluorescent microscopy showed that RAVE inserted itself into the bacterial cell membrane, destroyed membrane permeability, and induced cell death. As such, RAVE is a novel multi-functional compound with antioxidant and antibacterial activity, so it can be used as a functional material in the food and cosmetic industries.

Characterization of Novel Salt-Tolerant Esterase Isolated from the Marine Bacterium Alteromonas sp. 39-G1.

An esterase gene, estA1, was cloned from Alteromonas sp. 39-G1 isolated from the Beaufort Sea. The gene is composed of 1,140 nucleotides and codes for a 41,190 Da protein containing 379 amino acids. As a result of a BLAST search, the protein sequence of esterase EstA1 was found to be identical to Alteromonas sp. esterase (GenBank: PHS53692). As far as we know, no research on this enzyme has yet been conducted. Phylogenetic analysis showed that esterase EstA1 was a member of the bacterial lipolytic enzyme family IV (hormone sensitive lipases). Two deletion mutants (Δ20 and Δ54) of the esterase EstA1 were produced in Escherichia coli BL21 (DE3) cells with part of the N-terminal of the protein removed and His-tag attached to the C-terminal. These enzymes exhibited the highest activity toward p-nitrophenyl (pNP) acetate (C2) and had little or no activity towards pNP-esters with acyl chains longer than C6. Their optimum temperature and pH of the catalytic activity were 45°C and pH 8.0, respectively. As the NaCl concentration increased, their enzyme activities continued to increase and the highest enzyme activities were measured in 5 M NaCl. These enzymes were found to be stable for up to 8 h in the concentration of 3-5 M NaCl. Moreover, they have been found to be stable for various metal ions, detergents and organic solvents. These salt-tolerant and chemical-resistant properties suggest that the enzyme esterase EstA1 is both academically and industrially useful.

Characterization of Organic Solvent-Tolerant Lipolytic Enzyme from Marinobacter lipolyticus Isolated from the Antarctic Ocean.

The Antarctic marine environment provides a good source of novel lipolytic enzymes that possess beneficial properties, i.e., resistance to extreme physical and chemical conditions. We found a lipolytic Escherichia coli colony that was transformed using genomic DNA from Marinobacter lipolyticus 27-A9 isolated from the Antarctic Ross Sea. DNA sequence analysis revealed an open reading frame of lipolytic enzyme gene. The gene translates a protein (LipA9) of 404 amino acids with molecular mass of 45,247 Da. Recombinant LipA9 was expressed in E. coli BL21 (DE3) cells and purified by anion exchange and gel filtration chromatography. The kcat/Km of LipA9 was 175 s-1 µM-1, and the optimum temperature and pH were 70 °C and pH 8.0, respectively. LipA9 had quite high organic solvent stability; it was stable toward several common organic solvents up to 50% concentration. Substrate specificity studies showed that LipA9 preferred a short acyl chain length of p-nitrophenyl ester and triglyceride. Sequence analysis showed that LipA9 contained catalytic Ser72 and Lys75 in S-x-x-K motif, like family VIII esterases. Homology modeling and site-directed mutagenesis studies revealed that Tyr141 and Tyr188 residues were located near the conserved motif and played an important role in catalytic activity.

Cadaverine Production by Using Cross-Linked Enzyme Aggregate of Escherichia coli Lysine Decarboxylase.

Lysine decarboxylase (CadA) converts L-lysine into cadaverine (1,5-pentanediamine), which is an important platform chemical with many industrial applications. Although there have been many efforts to produce cadaverine through the soluble CadA enzyme or Escherichia coli whole cells overexpressing the CadA enzyme, there have been few reports concerning the immobilization of the CadA enzyme. Here, we have prepared a cross-linked enzyme aggregate (CLEA) of E. coli CadA and performed bioconversion using CadACLEA. CadAfree and CadACLEA were characterized for their enzymatic properties. The optimum temperatures of CadAfree and CadACLEA were 60°C and 55°C, respectively. The thermostability of CadACLEA was significantly higher than that of CadAfree. The optimum pH of both enzymes was 6.0. CadAfree could not be recovered after use, whereas CadACLEA was rapidly recovered and the residual activity was 53% after the 10th recycle. These results demonstrate that CadACLEA can be used as a potential catalyst for efficient production of cadaverine.

Effects of N-/C-Terminal Extra Tags on the Optimal Reaction Conditions, Activity, and Quaternary Structure of Bacillus thuringiensis Glucose 1-Dehydrogenase.

Glucose dehydrogenase (GDH) is an oxidoreductase enzyme and is used as a biocatalyst to regenerate NAD(P)H in reductase-mediated chiral synthesis reactions. In this study, the glucose 1-dehydrogenase B gene (gdhB) was cloned from Bacillus thuringiensis subsp. kurstaki, and wild-type (GDH-BTWT) and His-tagged (GDH-BTN-His, GDH-BTC-His) enzymes were produced in Escherichia coli BL21 (DE3). All enzymes were produced in the soluble forms from E. coli. GDH-BTWT and GDH-BTN-His showed high specific enzymatic activities of 6.6 U/mg and 5.5 U/mg, respectively, whereas GDH-BTC-His showed a very low specific enzymatic activity of 0.020 U/mg. These results suggest that the intact C-terminal carboxyl group is important for GDH-BT activity. GDH-BTWT was stable up to 65°C, whereas GDH-BTN-His and GDH-BTC-His were stable up to 45°C. Gel permeation chromatography showed that GDH-BTWT is a dimer, whereas GDH-BTN-His and GDH-BTC-His are monomeric. These results suggest that the intact N- and C-termini are required for GDH-BT to maintain thermostability and to form its dimer structure. The homology model of the GDH-BTWT single subunit was constructed based on the crystal structure of Bacillus megaterium GDH (PDB ID 3AY6), showing that GDH-BTWT has a Rossmann fold structure with its N- and C-termini located on the subunit surface, which suggests that His-tagging affected the native dimer structure. GDH-BTWT and GDH-BTN-His regenerated NADPH in a yeast reductase-mediated chiral synthesis reaction, suggesting that these enzymes can be used as catalysts in fine-chemical and pharmaceutical industries.

Antibacterial Effect of Fructose Laurate Synthesized by Candida antarctica B Lipase-Mediated Transesterification.

Sugar esters are valuable compounds composed of various sugars and fatty acids that can be used as antibacterial agents and emulsifiers in toothpaste and canned foods. For example, fructose fatty acid esters suppress growth of Streptococcus mutans, a typical pathogenic bacterium causing dental caries. In this study, fructose laurate ester was chosen as a target material and was synthesized by a transesterification reaction using Candida antarctica lipase B. We performed a solvent screening experiment and found that a t-butanol/dimethyl sulfoxide mixture was the best solvent to dissolve fructose and methyl laurate. Fructose laurate was synthesized by transesterification of fructose (100 mM) with methyl laurate (30 mM) in t-butanol containing 20% dimethyl sulfoxide. The conversion yield was about 90%, which was calculated based on the quantity of methyl laurate using high-performance liquid chromatography. Fructose monolaurate (Mr 361) was detected in the reaction mixture by high-resolution mass spectrometry. The inhibitory effect of fructose laurate on growth of oral or food spoilage microorganisms, including S. mutans, Bacillus coagulans, and Geobacillus stearothermophilus, was evaluated.

Production of Omega-3 Fatty Acid Ethyl Esters from Menhaden Oil Using Proteus vulgaris Lipase-Mediated One-Step Transesterification and Urea Complexation.

An organic solvent-stable lipase from Proteus vulgaris K80 was used to produce the omega-3 polyunsaturated fatty acid ethyl esters (ω-3 PUFA EEs). First, the lyophilized recombinant lipase K80 (LyoK80) was used to perform the transesterification reaction of menhaden oil and ethanol. LyoK80 produced the ω-3 PUFA EEs with a conversion yield of 82 % in the presence of 20 % water content via a three-step ethanol-feeding process; however, in a non-aqueous condition, LyoK80 produced only a slight amount of the ω-3 PUFA EEs. To enhance its reaction properties, the lipase K80 was immobilized on a hydrophobic bead to derive ImmK80; the biochemical properties and substrate specificity of ImmK80 are similar to those of LyoK80. ImmK80 was then used to produce ω-3 PUFA EEs in accordance with the same transesterification reaction. Unlike LyoK80, ImmK80 achieved a high ω-3 PUFA EE conversion yield of 86 % under a non-aqueous system via a one-step ethanol-feeding reaction. The ω-3 PUFA EEs were purified up to 92 % using a urea complexation method.

Production of (R)-Ethyl-4-Chloro-3-Hydroxybutanoate Using Saccharomyces cerevisiae YOL151W Reductase Immobilized onto Magnetic Microparticles.

For the synthesis of various pharmaceuticals, chiral alcohols are useful intermediates. Among them, (R)-ethyl-4-chloro-3-hydroxybutanoate ((R)-ECHB) is an important building block for the synthesis of L-carnitine. (R)-ECHB is produced from ethyl-4-chloro-3-oxobutanoate (ECOB) by a reductase-mediated, enantioselective reduction reaction. The Saccharomyces cerevisiae YOL151W reductase that is expressed in Escherichia coli cells exhibited an enantioselective reduction reaction toward ECOB. By virtue of the C-terminal His-tag, the YOL151W reductase was purified from the cell-free extract using Ni(2+)-NTA column chromatography and immobilized onto Ni(2+)-magnetic microparticles. The physical properties of the immobilized reductase (Imm-Red) were measured using electron microscopy, a magnetic property measurement system, and a zeta potential system; the average size of the particles was approximately 1 µm and the saturated magnetic value was 31.76 emu/g. A neodymium magnet was used to recover the immobilized enzyme within 2 min. The Imm-Red showed an optimum temperature at 45°C and an optimum pH at 6.0. In addition, Bacillus megaterium glucose dehydrogenase (GDH) was produced in the E. coli cells and was used in the coupling reaction to regenerate the NADPH cofactor. The reduction/oxidation coupling reaction composed of the Imm-Red and GDH converted 20 mM ECOB exclusively into (R)- ECHB with an e.e.p value of 98%.

Transesterification of plant oils using Staphylococcus haemolyticus L62 lipase displayed on Escherichia coli cell surface using the OmpA signal peptide and EstAß8 anchoring motif.

Staphylococcus haemolyticus L62 (SHL62) lipase was displayed on the outer membrane of Escherichia coli using the OmpA signal peptide and the autotransporter EstAß8 protein. Localization of SHL62 lipase on the outer membrane of E. coli was confirmed using immunofluorescence microscopy and flow cytometry analysis. Lipase activity of the displayed SHL62 lipase was also measured using spectrophotometry and pH titration. SHL62 lipase activity of whole cells reached 2.0U/ml culture (OD600nm of 10) when it was measured by the p-nitrophenyl caprylate assay after being induced with 1mM IPTG for 24h. The optimum temperature and pH for the lipase was 45°C and 10, respectively. Furthermore, it maintained more than 90% of maximum lipase activity at up to 50°C and in a pH range of 5-9. The hydrolytic activity assay conduted with various substrates confirmed that p-nitrophenyl caprylate and corn oil were preferred substrates among various synthetic and natural substrates, respectively. The displayed SHL62 lipase produced fatty acid esters from various alcohols and plant oils through transesterification.