Single-Atom Catalysts in Conductive Metal-Organic Frameworks: Enabling Reversible Gas Sensing at Room Temperature.

Conductive metal-organic frameworks (cMOFs) offer high porosity and electrical conductivity simultaneously, making them ideal for application in chemiresistive sensors. Recently, incorporating foreign elements such as catalytic nanoparticles into cMOFs has become a typical strategy to enhance their sensing properties. However, this approach has led to critical challenges, such as pore blockage that impedes gas diffusion, as well as limited improvement in reversibility. Herein, single-atom catalyst (SAC)-functionalized cMOF is presented as a robust solution to the current limitations. Facile functionalization of SACs in a cMOF can be achieved through electrochemical deposition of metal precursors. As a proof of concept, a Pd SAC-functionalized cMOF is synthesized. The Pd SACs are stabilized at the interplanar sites of cMOF with Pd-N4 coordination while preserving the porosity of the MOF matrix. Notably, the microenvironment created by Pd SACs prevents irreversible structural distortion of cMOFs and facilitates a reversible charge transfer with NO2. Consequently, the cMOF exhibits a fully recoverable NO2 response, which was not previously attainable with the nanoparticle functionalization. Additionally, with the combination of preserved porosity for gas diffusion, it demonstrates the fastest level of response and recovery speed compared to other 2D-cMOFs of this class.

Overcoming Chemical and Mechanical Instabilities in Lithium Metal Anodes with Sustainable and Eco-Friendly Artificial SEI Layer.

Construction of a robust artificial solid-electrolyte interphase (SEI) layer has proposed an effective strategy to overcome the instability of the lithium (Li). However, existing artificial SEI layers inadequately controlled ion distribution, leading to dendritic growth and penetration. Furthermore, the environmental impact of the manufacturing process and materials of the artificial layer is often overlooked. In this work, a chemically and physically reinforced membrane (C-Li@P) composed of the biocompatible Li+ coordinated carboxymethyl guar gum (CMGG) and polyacrylamide (PAM) polymers serves as an artificial SEI membrane for dendrite-free Li. This membrane with hollow channels not only directs ion flux along the interspace of fibers, fostering uniform Li plating but also induces a desirable interface chemistry. Consequently, artificial SEI membrane-covered Li exhibits stable electrochemical plating/stripping reactions, surpassing the cycle life of ≈750% of bare Li. It demonstrates exceptional capacity retention of ≈93.9%, ≈88.1%, and ≈79.18% in full cells paired with LiNi0.8Mn0.1Co0.1O2 (NMC811), LiNi0.6Mn0.2Co0.2O2 (NMC622) and S cathodes, respectively over 200 cycles at 1 C rate. Additionally, the water-based green manufacturing and biodegradability of the membrane demonstrated the sustainable development and disposal of electrodes. This work provides a comprehensive framework for the design of an artificial layer chemically and physically regulating dendritic growth.

Unmatched Redox Activity of the Palladium-Doped Indium Oxide Oxygen Carrier for Low-Temperature CO2 Splitting.

The chemical conversion of CO2 into value-added products is the key technology to realize a carbon-neutral society. One representative example of such conversion is the reverse water-gas shift reaction, which produces CO from CO2. However, the activity is insufficient at ambient pressure and lower temperatures (<600 °C), making it a highly energy-intensive and impractical process. Herein, we report indium oxide nanofibers modified with palladium catalysts that exhibit significantly potent redox activities toward the reduction of CO2 splitting via chemical looping. In particular, we uncover that the doped palladium cations are selectively reduced and precipitated onto the host oxide surface as metallic nanoparticles. These catalytic gems formed operando make In2O3 lattice oxygen more redox-active in H2 and CO2 environments. As a result, the composite nanofiber catalysts demonstrate the reverse water-gas shift reaction via chemical looping at record-low temperatures (≤350 °C), while also imparting high activities (CO2 conversion: 45%). Altogether, our findings expand the viability of CO2 splitting at lower temperatures and provide design principles for indium oxide-based catalysts for CO2 conversion.

Cobalt-Doped Ceria Sensitizer Effects on Metal Oxide Nanofibers: Heightened Surface Reactivity for High-Performing Chemiresistive Sensors.

Chemiresistive gas sensors based on semiconducting metal oxides typically rely on noble metal catalysts to enhance their sensitivity and selectivity. However, noble metal catalysts have several drawbacks for practical utilization, including their high cost, their propensity for spontaneous agglomeration, and poisoning effects with certain types of gases. As such, in the interest of commercializing the chemiresistive gas sensor technology, we propose an alternative design for a noble-metal-free sensing material through the case study of Co-doped ceria (Co-CeO2) catalysts embedded in a SnO2 matrix. In this investigation, we utilized electrospinning and subsequent calcination to prepare Co-CeO2 catalyst nanoparticles integrated with SnO2 nanofibers (NFs) with uniform particle distribution and particle size regulation down to the sub-2 nm regime. The resulting Co-CeO2@SnO2 NFs exhibited superior gas sensing characteristics toward isoprene (C5H8) gas, a significant biomarker for monitoring the onset of various diseases through breath diagnostics. In particular, we identified that the Co-CeO2 catalysts, owing to the transition metal doping, facilitated the spillover of chemisorbed oxygen species to the SnO2 sensing body. This resulting in the sensor having a 27.4-fold higher response toward 5 ppm of C5H8 (compared to pristine SnO2), exceptionally high selectivity, and a low detection limit of 100 ppb. The sensor also exhibited high stability for prolonged response-recovery cycles, attesting to the strong anchoring of Co-CeO2 catalysts in the SnO2 matrix. Based on our findings, the transition metal-doped metal oxide catalysts, such as Co-CeO2, demonstrate strong potential to completely replace noble metal catalysts, thereby advancing the development of the commercially viable chemiresistive gas sensors free from noble metals, capable of detecting target gases at sub-ppm levels.

Effect of illite pretreatment on germinated Brown rice with Special Reference to amino acids, antioxidants, texture, and mineral elements.

The pretreatment process of various foods has been reported to improve their nutritional properties. The soaking of brown rice improves the texture and nutrients, which are crucial for cooking and maintaining its high functional value. Illite, a clay mineral, has recently been discovered to improve the nutritional value of seeds. Based on these findings, we soaked brown rice with different concentrations of illite solution for different durations and allowed the germination to perform analyses. Soaking the brown rice for 6 h with a germination period of 48 h was determined to be the optimal condition because of its higher sprout length. In addition, this optimal condition had improved textural characteristics such as reduced hardness, gumminess, chewiness, and cohesiveness, and it also had increased adhesiveness and stabilized resilience and springiness. The treatment solutions were free from heavy metal contaminants, whereas the mineral contents such as K, Ca, Fe, Mg, and Na were significantly increased with the increase in illite concentration. Moreover, our results showed that illite treatment could preserve the color appearance and seed germination. The ratio of essential amino acids to non-essential amino acids and antioxidants (phenolic contentγ-oryzanol, and flavonoid) of germinated brown rice was considerably increased with illite treatment. In germinated brown rice, an increase in DPPH and superoxide dismutase levels, a slight decrease in flavonoids, and no difference in polyphenol content were observed. These findings suggest that pre-soaking brown rice seeds with the appropriate concentration of illite could enhance their nutritional properties, which might attract consumers' interest to include this in their daily diet.

Dual-Photosensitizer Synergy Empowers Ambient Light Photoactivation of Indium Oxide for High-Performance NO2 Sensing.

Light-activated chemiresistors offer a powerful approach to achieving lower-temperature gas sensing with unprecedented sensitivities. However, an incomplete understanding of how photoexcited charge carriers enhance sensitivity obstructs the rational design of high-performance sensors, impeding the practical utilization under commonly accessible light sources instead of ultraviolet or higher-energy sources. Here, a rational approach is presented to modulate the electronic properties of the parent metal oxide phase, exemplified by this model system of Bi-doped In2O3 nanofibers decorated with Au nanoparticles (NPs) that exhibit superior NO2 sensing performance. Bi doping introduces mid-gap energy levels into In2O3, promoting photoactivation even under visible blue light. Additionally, green-absorbing plasmonic Au NPs facilitate electron transfer across the heterojunction, extending the photoactive region toward the green light. It is revealed that the direct involvement of photogenerated charge carriers in gas adsorption and desorption processes is pivotal for enhancing gas sensing performance. Owing to the synergistic interplay between the Bi dopants and the Au NPs, the Au-BixIn2-xO3 (x = 0.04) sensing layers attain impressive response values (Rg/Ra = 104 at 0.6 ppm NO2) under green light illumination and demonstrate practical viability through evaluation under simulated mixed-light conditions, all of which significantly outperforms previously reported visible light-activated NO2 sensors.

Hydrovoltaic Electricity Generator with Hygroscopic Materials: A Review and New Perspective.

The global energy crisis caused by the overconsumption of nonrenewable fuels has prompted researchers to develop alternative strategies for producing electrical energy. In this review, a fascinating strategy that simply utilizes water, an abundant natural substance throughout the globe and even in air as moisture, as a power source is introduced. The concept of the hydrovoltaic electricity generator (HEG) proposed herein involves generating an electrical potential gradient by exposing the two ends of the HEG device to dissimilar physicochemical environments, which leads to the production of an electrical current through the active material. HEGs, with a large variety of viable active materials, have much potential for expansion toward diverse applications including permanent and/or emergency power sources. In this review, representative HEGs that generate electricity by the mechanisms of diffusion, streaming, and capacitance as case studies for building a fundamental understanding of the electricity generation process are discussed. In particular, by comparing the use and absence of hygroscopic materials, HEG mechanism studies to establish active material design principles are meticulously elucidated. The review with future perspectives on electrode design using conducting nanomaterials, considerations for high performance device construction, and potential impacts of the HEG technology in improving the livelihoods are reviewed.

Advancing Breathability of Respiratory Nanofilter by Optimizing Pore Structure and Alignment in Nanofiber Networks.

Respiratory masks are the primary and most effective means of protecting individuals from airborne hazards such as droplets and particulate matter during public engagements. However, conventional electrostatically charged melt-blown microfiber masks typically require thick and dense membranes to achieve high filtration efficiency, which in turn cause a significant pressure drop and reduce breathability. In this study, we have developed a multielectrospinning system to address this issue by manipulating the pore structure of nanofiber networks, including the use of uniaxially aligned nanofibers created via an electric-field-guided electrospinning apparatus. In contrast to the common randomly collected microfiber membranes, partially aligned dual-nanofiber membranes, which are fabricated via electrospinning of a random 150 nm nanofiber base layer and a uniaxially aligned 450 nm nanofiber spacer layer on a roll-to-roll collector, offer an efficient way to modulate nanofiber membrane pore structures. Notably, the dual-nanofiber configuration with submicron pore structure exhibits increased fiber density and decreased volume density, resulting in an enhanced filtration efficiency of over 97% and a 50% reduction in pressure drop. This leads to the highest quality factor of 0.0781. Moreover, the submicron pore structure within the nanofiber networks introduces an additional sieving filtration mechanism, ensuring superior filtration efficiency under highly humid conditions and even after washing with a 70% ethanol solution. The nanofiber mask provides a sustainable solution for safeguarding the human respiratory system, as it effectively filters and inactivates human coronaviruses while utilizing 130 times fewer polymeric materials than melt-blown filters. This reusability of our filters and their minimum usage of polymeric materials would significantly reduce plastic waste for a sustainable global society.

Obesity-induced Ly6CHigh and Ly6CLow monocyte subset changes abolish post-ischemic limb conditioning benefits in stroke recovery.

Remote limb conditioning (RLC), performed by intermittent interruption of blood flow to a limb, triggers endogenous tolerance mechanisms and improves stroke outcomes. The underlying mechanism for the protective effect involves a shift of circulating monocytes to a Ly6CHigh proinflammatory subset in normal metabolic conditions. The current study investigates the effect of RLC on stroke outcomes in subjects with obesity, a vascular comorbidity. Compared to lean mice, obese stroke mice displayed significantly higher circulating monocytes (monocytosis), increased CD45High monocytes/macrophages infiltration to the injured brain, worse acute outcomes, and delayed recovery. Unlike lean mice, obese mice with RLC at 2 hours post-stroke failed to shift circulating monocytes to pro-inflammatory status and nullified RLC-induced functional benefit. The absence of the monocyte shift was also observed in splenocytes incubated with RLC serum from obese mice, while the shift was observed in the cultures with RLC serum from lean mice. These results showed that the alteration of monocytosis and subsets underlies negating RLC benefits in obese mice and suggest careful considerations of comorbidities at the time of RLC application for stroke therapy.

Flash-Thermal Shock Synthesis of Single Atoms in Ambient Air.

Single-atom catalysts feature interesting catalytic activity toward applications that rely on surface reactions such as electrochemical energy storage, catalysis, and gas sensors. However, conventional synthetic approaches for such catalysts require extended periods of high-temperature annealing in vacuum systems, limiting their throughput and increasing their production cost. Herein, we report an ultrafast flash-thermal shock (FTS)-induced annealing technique (temperature > 2850 °C, <10 ms duration, and ramping/cooling rates of ∼105 K/s) that operates in an ambient-air environment to prepare single-atom-stabilized N-doped graphene. Melamine is utilized as an N-doping source to provide thermodynamically favorable metal-nitrogen bonding sites, resulting in a uniform and high-density atomic distribution of single metal atoms. To demonstrate the practical utility of the single-atom-stabilized N-doped graphene produced by the FTS method, we showcased their chemiresistive gas sensing capabilities and electrocatalytic activities. Overall, the air-ambient, ultrafast, and versatile (e.g., Co, Ni, Pt, and Co-Ni dual metal) FTS method provides a general route for high-throughput, large area, and vacuum-free manufacturing of single-atom catalysts.

Metallization of Targeted Protein Assemblies in Cell-Derived Extracellular Matrix by Antibody-Guided Biotemplating.

Biological systems are composed of hierarchical structures made of a large number of proteins. These structures are highly sophisticated and challenging to replicate using artificial synthesis methods. To exploit these structures in materials science, biotemplating is used to achieve biocomposites that accurately mimic biological structures and impart functionality of inorganic materials, including electrical conductivity. However, the biological scaffolds used in previous studies are limited to stereotypical and simple morphologies with little synthetic diversity because of a lack of control over their morphologies. This study proposes that the specific protein assemblies within the cell-derived extracellular matrix (ECM), whose morphological features are widely tailorable, can be employed as versatile biotemplates. In a typical procedure, a fibrillar assembly of fibronectin-a constituent protein of the ECM-is metalized through an antibody-guided biotemplating approach. Specifically, the antibody-bearing nanogold is attached to the fibronectin through antibody-antigen interactions, and then metals are grown on the nanogold acting as a seed. The biomimetic structure can be adapted for hydrogen production and sensing after improving its electrical conductivity through thermal sintering or additional metal growth. This study demonstrates that cell-derived ECM can be an attractive option for addressing the diversity limitation of a conventional biotemplate.

Two-Dimensional Electrically Conductive Metal-Organic Frameworks as Chemiresistive Sensors.

Metal-organic frameworks (MOFs) have emerged as attractive chemical sensing materials due to their exceptionally high porosity and chemical diversity. Nevertheless, the utilization of MOFs in chemiresistive type sensors has been hindered by their inherent limitation in electrical conductivity. The recent emergence of two-dimensional conductive MOFs (2D c-MOFs) has addressed this limitation by offering enhanced electrical conductivity, while still retaining the advantageous properties of MOFs. In particular, c-MOFs have shown promising advantages for the fabrication of sensors capable of operating at room temperature. Thus, active research on gas sensors utilizing c-MOFs is currently underway, focusing on enhancing sensitivity and selectivity. To comprehend the potential of MOFs as chemiresistive sensors for future applications, it is crucial to understand not only the fundamental properties of conductive MOFs but also the state-of-the-art works that contribute to improving their performance. This comprehensive review delves into the distinctive characteristics of 2D c-MOFs as a new class of chemiresistors, providing in-depth insights into their unique sensing properties. Furthermore, we discuss the proposed sensing mechanisms associated with 2D c-MOFs and provide a concise summary of the strategies employed to enhance the sensing performance of 2D c-MOFs. These strategies encompass a range of approaches, including the design of metal nodes and linkers, morphology control, and the synergistic use of composite materials. In addition, the review thoroughly explores the prospects of 2D c-MOFs as chemiresistors and elucidates their remarkable potential for further advancements. The insights presented in this review shed light on future directions and offer valuable opportunities in the chemical sensing research field.

Three-Dimensional MoS2/MXene Heterostructure Aerogel for Chemical Gas Sensors with Superior Sensitivity and Stability.

The concept of integrating diverse functional 2D materials into a heterostructure provides platforms for exploring physics that cannot be accessed in a single 2D material. Here, physically mixing two 2D materials, MXene and MoS2, followed by freeze-drying is utilized to successfully fabricate a 3D MoS2/MXene van der Waals heterostructure aerogel. The low-temperature synthetic approach effectively suppresses significant oxidation of the Ti3C2Tx MXene and results in a hierarchical and freestanding 3D heterostructure composed of high-quality MoS2 and MXene nanosheets. Functionalization of MXene with a MoS2 catalytic layer substantially improves sensitivity and long-term stability toward detection of NO2 gas, and computational studies are coupled with experimental results to elucidate that the mechanism behind enhancements in the gas-sensing properties is effective inhibition of HNO2 formation on the MXene surface, due to the presence of MoS2. Overall, this study has a great potential for expansion of applicability to other classes of two-dimensional materials as a general synthesis method, to be applied in future fields of catalysis and electronics.

Flash-Induced High-Throughput Porous Graphene via Synergistic Photo-Effects for Electromagnetic Interference Shielding.

Porous 2D materials with high conductivity and large surface area have been proposed for potential electromagnetic interference (EMI) shielding materials in future mobility and wearable applications to prevent signal noise, transmission inaccuracy, system malfunction, and health hazards. Here, we report on the synthesis of lightweight and flexible flash-induced porous graphene (FPG) with excellent EMI shielding performance. The broad spectrum of pulsed flashlight induces photo-chemical and photo-thermal reactions in polyimide films, forming 5 × 10 cm2-size porous graphene with a hollow pillar structure in a few milliseconds. The resulting material demonstrated low density (0.0354 g cm-3) and outstanding absolute EMI shielding effectiveness of 1.12 × 105 dB cm2 g-1. The FPG was characterized via thorough material analyses, and its mechanical durability and flexibility were confirmed by a bending cycle test. Finally, the FPG was utilized in drone and wearable applications, showing effective EMI shielding performance for internal/external EMI in a drone radar system and reducing the specific absorption rate in the human body.

Flash-Thermal Shock Synthesis of High-Entropy Alloys Toward High-Performance Water Splitting.

High-entropy alloys (HEAs) provide unprecedented physicochemical properties over unary nanoparticles (NPs). According to the conventional alloying guideline (Hume-Rothery rule), however, only size-and-structure similar elements can be mixed, limiting the possible combinations of alloying elements. Recently, it has been reported that based on carbon thermal shocks (CTS) in a vacuum atmosphere at high temperature, ultrafast heating/cooling rates and high-entropy environment play a critical role in the synthesis of HEAs, ruling out the possibility of phase separation. Since the CTS requires conducting supports, the Joule-heating efficiencies rely on the carbon qualities, featuring difficulties in uniform heating along the large area. This work proposes a photo-thermal approach as an alternative and innovative synthetic method that is compatible with ambient air, large-area, remote process, and free of materials selection. Single flash irradiation on carbon nanofibers induced momentary high-temperature annealing (>1800 °C within 20 ms duration, and ramping/cooling rates >104 K s-1 ) to successfully decorate HEA NPs up to nine elements with excellent compatibility for large-scale synthesis (6.0 × 6.0 cm2 of carbon nanofiber paper). To demonstrate their feasibility toward applications, senary HEA NPs (PtIrFeNiCoCe) are designed and screened, showing high activity (ηoverall = 777 mV) and excellent stability (>5000 cycles) at the water splitting, including hydrogen evolution reactions and oxygen evolution reactions.

Surface Modulation of Co3O4 Yolk-Shell Spheres with Tungsten Doping for Superior Acetone Sensitivity.

This study introduces a promising technique to enhance the sensitivity of p-type semiconductors in gas-sensing applications. By utilizing a glycerate-templated synthesis approach, a unique hierarchical W-doped Co3O4 yolk-shell sphere (YSS)-based sensor was developed, exhibiting exceptional sensitivity toward acetone gas. The synthesized YSSs feature a yolk-shell structure with a diameter of approximately 500 nm and a large surface area of 117.46 m2/g, which allows for efficient gas interaction and high sensitivity toward acetone gas. Furthermore, the incorporation of tungsten (W), a non-noble metal, as a dopant significantly enhances the surface activity of Co3O4, leading to a remarkably high response of 16.5 toward 5 ppm acetone, which is substantially higher than that of the pure Co3O4 YSS (2.9). The W-doped Co3O4 YSS also exhibits excellent selectivity to other interfering gases and the ability to detect ultralow concentrations of acetone as low as 10 ppb. The proposed non-noble metal doping strategy presents a practical solution for enhancing the sensitivity and selectivity of p-type semiconductor-based gas sensors. This approach holds great potential for practical gas-sensing applications due to their affordability and abundance, making them a cost-effective and versatile alternative to noble metal-catalyzed sensors.

All-Graphene Quantum Dot-Derived Battery: Regulating Redox Activity Through Localized Subdomains.

In the quest for materials sustainability for grid-scale applications, graphene quantum dot (GQD), prepared via eco-efficient processes, is one of the promising graphitic-organic matters that have the potential to provide greener solutions for replacing metal-based battery electrodes. However, the utilization of GQDs as electroactive materials has been limited; their redox behaviors associated with the electronic bandgap property from the sp2 carbon subdomains, surrounded by functional groups, are yet to be understood. Here, the experimental realization of a subdomained GQD-based anode with stable cyclability over 1000 cycles, combined with theoretical calculations, enables a better understanding of the decisive impact of controlled redox site distributions on battery performance. The GQDs are further employed in cathode as a platform for full utilization of inherent electrochemical activity of bio-inspired redox-active organic motifs, phenoxazine. Using the GQD-derived anode and cathode, an all-GQD battery achieves a high energy density of 290 Wh kgcathode -1 (160 Wh kgcathode+anode -1 ), demonstrating an effective way to improve reaction reversibility and energy density of sustainable, metal-free batteries.

Inspired by Wood: Thick Electrodes for Supercapacitors.

The emergence and development of thick electrodes provide an efficient way for the high-energy-density supercapacitor design. Wood is a kind of biomass material with porous hierarchical structure, which has the characteristics of a straight channel, uniform pore structure, good mechanical strength, and easy processing. The wood-inspired low-tortuosity and vertically aligned channel architecture are highly suitable for the construction of thick electrochemical supcapacitor electrodes with high energy densities. This review summarizes the design concepts and processing parameters of thick electrode supercapacitors inspired by natural woods, including wood-based pore structural design regulation, electric double layer capacitances (EDLCs)/pseudocapacitance construction, and electrical conductivity optimization. In addition, the optimization strategies for preparing thick electrodes with wood-like structures (e.g., 3D printing, freeze-drying, and aligned-low tortuosity channels) are also discussed in detail. Further, this review presents current challenges and future trends in the design of thick electrodes for supercapacitors with wood-inspired pore structures. As a guideline, the brilliant blueprint optimization will promote sustainable development of wood-inspired structure design for thick electrodes and broaden the application scopes.