Characterization of Seven New Steroidal Saponins from Korean Oat Cultivars by UPLC-QTOF-MS and UPLC-MS/MS.

Oat saponins are composed of triterpenoid and steroidal saponins, and their potential biological activities, such as antibacterial, antifungicidal, osteogenic, and anticancer activities, have been reported. In this study, qualitative and quantitative analyses of oat saponins were conducted by using UPLC-QToF-MS and UPLC-Triple Q-MS/MS. A total of 22 saponins were analyzed in seven Korean oat cultivars. Among them, 7 saponins were identified as new compounds in this source, which were tentatively confirmed as nuatigenin-type saponins with 26-O-diglucoside and 3-O-malonylglucoside forms and (25S)-furost-5-en-3ß,22,26-triol-type saponins. In addition, the total content of these saponins ranged from 70.61 to 141.38 mg/100 g dry weight, and it was affected by the type of oat cultivar and the presence or absence of hulling. These detailed profiles will be suggested as fundamental data for breeding superior oat cultivars, evaluating of related products, and various industries.

Relationship between psycho-physiological indicators and task performance under various indoor space designs for telecommuting environment by introducing mixed-reality.

The increase in telecommuting during COVID-19 and advances in digital technology have necessitated the establishment of guidelines for maximizing productivity through indoor space design for telecommuters. Additionally, understanding the physiological response of individuals working in indoor spaces has attracted attention. This study applied mixed-reality environment to alter the design of the indoor space in real-time, while monitoring the task performance and representative psycho-physiological indicators (electroencephalogram and heart rate variability) of 30 individuals with telecommuting experience. To this end, four tasks, including spatial memory, attention, execution, and working memory, were conducted, and the psycho-physiological data from these tests were statistically analyzed. The results revealed that the design of the indoor space did not affect the spatial memory; however, the parasympathetic nerves were stimulated in visually non-preferred spaces, thus reducing mental stress and leading to high efficiency in short-term work. According to the Yerkes-Dodson law, the working memory of an individual is generally efficient and physically stable over time if they adjust to a preferred or decision-making space. Thus, the future design of telecommuting spaces must consider the type of work being done, and guidelines for spatial design should be developed by recognizing the psycho-physiological status of users, while increasing efficiency.

Is it true that treatment in patients with Subaxial Cervical Spine Injury Classification System (SLICS) 4 is the surgeon's choice?

BACKGROUND: The Subaxial Cervical Spine Injury Classification System (SLICS) is a commonly used algorithm for diagnosing and managing subaxial cervical spine trauma. A SLIC score 4 suggests either surgery or non-surgically treatment depending on the surgeon's experience and patient's conditions. OBJECTIVE: Prognosis and treatment results were analyzed in patients with SLIC score 4. METHODS: The patients with SLIC score 4 were retrospectively reviewed from 2012 to 2019. Forty-one patients were included and divided into two groups: non-surgically treated and surgically treated. Demographic data and radiographs were analyzed. Statistical analysis was performed to determine the difference between the two clinical groups. RESULTS: Twenty-two patients were non-surgically treated, and nineteen patients were surgically treated. There was no neurological deterioration in both groups. However, there was no statistically significant difference in the last follow-up AISA and Nurick grade (p> 0.05). There was no significant difference in the number of patients who showed improvement when comparing the initial and the last follow-up neurological status (p> 0.05). CONCLUSION: Regardless of the treatment method, the spinal cord injury patients with SLICS point 4 showed a relatively good prognosis. Patients with SLIC score 4 could be treated non-surgically or surgically based on the surgeon's experience and factors associated with the patient's acute health status and chronic comorbidities.

Patterning Techniques in Coplanar Micro/Nano Capacitive Sensors.

Rapid technological advancements have led to increased demands for sensors. Hence, high performance suitable for next-generation technology is required. As sensing technology has numerous applications, various materials and patterning methods are used for sensor fabrication. This affects the characteristics and performance of sensors, and research centered specifically on these patterns is necessary for high integration and high performance of these devices. In this paper, we review the patterning techniques used in recently reported sensors, specifically the most widely used capacitive sensors, and their impact on sensor performance. Moreover, we introduce a method for increasing sensor performance through three-dimensional (3D) structures.

Nature-Inspired Chiral Structures: Fabrication Methods and Multifaceted Applications.

Diverse chiral structures observed in nature find applications across various domains, including engineering, chemistry, and medicine. Particularly notable is the optical activity inherent in chiral structures, which has emerged prominently in the field of optics. This phenomenon has led to a wide range of applications, encompassing optical components, catalysts, sensors, and therapeutic interventions. This review summarizes the imitations and applications of naturally occurring chiral structures. Methods for replicating chiral architectures found in nature have evolved with specific research goals. This review primarily focuses on a top-down approach and provides a summary of recent research advancements. In the latter part of this review, we will engage in discussions regarding the diverse array of applications resulting from imitating chiral structures, from the optical activity in photonic crystals to applications spanning light-emitting devices. Furthermore, we will delve into the applications of biorecognition and therapeutic methodologies, comprehensively examining and deliberating upon the multifaceted utility of chiral structures.

A composite of polymethylmethacrylate, hydroxyapatite, and ß-tricalcium phosphate for bone regeneration in an osteoporotic rat model.

The purpose of this study was to test several modifications of the polymethylmethacrylate (PMMA) bone cement by incorporating osteoconductive and biodegradable materials for enhancing bone regeneration capacity in an osteoporotic rat model. Three bio-composites (PHT-1 [80% PMMA, 16% HA, 4% ß-TCP], PHT-2 [70% PMMA, 24% HA, 6% ß-TCP], and PHT-3 [30% PMMA, 56% HA, 14% ß-TCP]) were prepared using different concentrations of PMMA, hydroxyapatite (HA), and ß-tricalcium phosphate (ß-TCP). Their morphological structure was then examined using a scanning electron microscope (SEM) and mechanical properties were determined using a MTS 858 Bionics test machine (MTS, Minneapolis, MN, USA). For in vivo studies, 35 female Wister rats (250 g, 12 weeks of age) were prepared and divided into five groups including a sham group (control), an ovariectomy-induced osteoporosis group (OVX), an OVX with pure PMMA group (PMMA), an OVX with PHT-2 group (PHT-2), and an OVX with PHT-3 group (PHT-3). In vivo bone regeneration efficacy was assessed using micro-CT and histological analysis after injecting the prepared bone cement into the tibial defects of osteoporotic rats. SEM investigation showed that the PHT-3 sample had the highest porosity and roughness among all samples. In comparison to other samples, the PHT-3 exhibited favorable mechanical properties for use in vertebroplasty procedures. Micro-CT and histological analysis of OVX-induced osteoporotic rats revealed that PHT-3 was more effective in regenerating bone and restoring bone density than other samples. This study suggests that the PHT-3 bio-composite can be a promising candidate for treating osteoporosis-related vertebral fractures.

Amplifying the Output of a Triboelectric Nanogenerator Using an Intermediary Layer of Gallium-Based Liquid Metal Particles.

The production of energy has become a major issue in today's world. Triboelectric nanogenerators (TENGs) are promising devices that can harvest mechanical energy and convert it into electrical energy. This study explored the use of Galinstan particles in the production of TENGs, which convert mechanical energy into electrical energy. During the curing process, the evaporation of the hexane solvent resulted in a film with varying concentrations of Galinstan particles. The addition of n-hexane during ultrasonication reduced the viscosity of the polydimethylsiloxane (PDMS) solution, allowing for the liquid metal (LM) particles to be physically pulverized into smaller pieces. The particle size distribution of the film with a Galinstan concentration of 23.08 wt.% was measured to be within a few micrometers through ultrasonic crushing. As the amount of LM particles in the PDMS film increased, the capacitance of the film also increased, with the LM/PDMS film with a 23.08% weight percentage exhibiting the highest capacitance value. TENGs were created using LM/PDMS films with different weight percentages and tested for open-circuit voltage, short-circuit current, and charge amount Q. The TENG with an LM/PDMS film with a 23.08% weight percentage had the highest relative permittivity, resulting in the greatest voltage, current, and charge amount. The use of Galinstan particles in PDMS films has potential applications in wearable devices, sensors, and biomedical fields.

Predictive role of absolute lymphocyte count in daratumumab-treated patients with relapsed/ refractory multiple myeloma.

BACKGROUND/AIMS: Daratumumab has shown an encouraging antitumor effect in patients with multiple myeloma (MM), and was known to alter the immune properties by off-targeting immunosuppressive cells. Here, we aimed to evaluate the change in absolute lymphocyte count (ALC) as a surrogate marker for predicting survival outcomes of patients treated with daratumumab. METHODS: Between 2018 and 2021, the medical records of patients with relapsed/refractory MM (RRMM) treated with daratumumab monotherapy at 10 centers in South Korea were reviewed. We collected the ALC data at pre-infusion (D0), day 2 after the first infusion (D2), and prior to the third cycle of daratumumab therapy (D56). RESULTS: Fifty patients who were administered at least two cycles of daratumumab were included. Overall response rate was 54.0% after two cycles of daratumumab treatment. On D2, almost all patients experienced a marked reduction in ALC. However, an increase in ALC on D56 (ALCD56) was observed in patients with non-progressive disease, whereas failure of ALC recovery was noted in those with progressive disease. Patients with ALCD56 > 700/µL (n = 39, 78.0%) had prolonged progression- free survival (PFS) and overall survival (OS) than those with ALCD56 ≤ 700/µL (median PFS: 5.8 months vs. 2.6 months, p = 0.025; median OS: 24.1 months vs. 6.1 months, p = 0.004). In addition, ALCD56 >700/µL was a significant favorable prognostic factor for PFS (hazard ratio [HR], 0.22; p = 0.003) and OS (HR, 0.23; p = 0.012). CONCLUSION: Increase in ALC during daratumumab treatment was significantly associated with prolonged survival outcomes in patients with RRMM. The ALC value can predict clinical outcomes in patients treated with daratumumab.

Eco-Friendly Keratin-Based Additives in the Polymer Matrix to Enhance the Output of Triboelectric Nanogenerators.

A triboelectric nanogenerator (TENG) is an energy generator that converts mechanical energy into electrical energy using triboelectricity at a nanoscale. Given their potential application as power sources in electronic devices, various attempts have been made to improve their output performance. Here, we present an eco-friendly, low-cost, and facile fabrication method to enhance TENG characteristics with keratin protein additives. Keratin sources, human and cat hair, are processed into powder and added to the friction layer, which increases their positive charge affinity, thereby boosting the output performance of the TENG. The output performances of the keratin-added TENG (K-TENG) are measured in the vertical contact-separation mode, with both additives having the highest output values at 5 wt % load. The K-TENG generates more output voltage and current values than the pristine TENG by 90 and 208%, respectively. Hence, we conclude that this method would potentially promote TENG as a strong candidate for a competitive "green" energy harvesting device in future electronics applications.

Comprehensive characterization of flavonoid derivatives in young leaves of core-collected soybean (Glycine max L.) cultivars based on high-resolution mass spectrometry.

Most previous studies have been focused on isoflavone profile with biological activities from soybean seed and its related products. However, in the present study, eighty-three flavonoid derivatives (55 flavonols, 9 flavones and 19 isoflavones) were comprehensively identified and quantified from young leaves of 21 core-collected soybean cultivars based on ultra-performance liquid chromatography-diode array detector with quadrupole time of flight/mass spectrometry (UPLC-DAD-QToF/MS). Among total flavonoids from soybean leaves (SLs), the abundant flavonols (83.6%) were primarily composed of di- and tri- glycosides combined to the aglycones (K, kaempferol; Q, quercetin; I, isorhamnetin). Particularly, K-rich SLs (yellow coated seed), Nongrim 51 (breeding line) and YJ208-1 (landrace) contained mainly kaempferol 3-O-(2″-O-glucosyl-6″-O-rhamnosyl)galactoside and 3-O-(2″,6″-di-O-rhamnosyl)galactoside, and were expected to be superior cultivars by their higher flavonoids. Besides, the new tri-I-glycosides (soyanins I-V) were presented as predominant components in Junyeorikong (landrace, black). Thus, this study suggest that the SLs can be considered as valuable edible resources due to their rich flavonoids. Also, these detailed profiles will support breeding of superior varieties with excellent biological activities as well as relationship with seed anthocyanins production, and contribute to perform metabolomics approach to investigate the changes of SLs flavonols during the leaf growth and fermentation in further research.

Simple Fabrication of Photodetectors Based on MoS2 Nanoflakes and Ag Nanoparticles.

Low-dimensional transition-metal dichalcogenides (TMDs) have recently emerged as promising materials for electronics and optoelectronics. In particular, photodetectors based on mono- and multilayered molybdenum disulfide (MoS2) have received much attention owing to their outstanding properties, such as high sensitivity and responsivity. In this study, photodetectors based on dispersed MoS2 nanoflakes (NFs) are demonstrated. MoS2 NFs interact with Ag nanoparticles (NPs) via low-temperature annealing, which plays a crucial role in determining device characteristics such as good sensitivity and short response time. The fabricated devices exhibited a rapid response and recovery, good photo-responsivity, and a high on-to-off photocurrent ratio under visible light illumination with an intensity lower than 0.5 mW/cm2.

Results of Multicenter Phase II Study With Imatinib Mesylate in Allogeneic Recipients With Steroid-Refractory Chronic GVHD.

In this multicenter phase II study, we evaluated the safety and efficacy of imatinib in patients with steroid-resistant chronic graft-versus-host disease (cGVHD) and evaluated the quality of life (QOL) of the enrolled patients using the Short Form 36 (SF-36) health survey questionnaire. Thirty-six patients who were diagnosed with steroid-refractory cGVHD and treated with imatinib between March 2013 and February 2019 received 100 mg/day of imatinib for 2 weeks. Depending on the patient's condition and investigator's decision, the imatinib dose was allowed to be increased by 100 mg every 2 weeks up to 400 mg/day. Patients who achieved stable disease (SD), partial remission (PR), and complete remission (CR) at 3-month response evaluations continued imatinib for up to 6 months. The majority of the patients had multi-organ cGVHD, with skin (63.9%), lungs (44.4%), mouth (38.9%), and eyes (38.9%) as the most common sites. The overall response rate was 58.3%, including 3 and 18 patients with CR and PR, respectively, and an overall decline in National Institutes of Health (NIH) severity scores was observed at study completion in the absence of significant adverse effects. The overall response rates were 70.5%, 66.7%, 34.8%, and 25% in patients with gastrointestinal, liver, skin, and lung cGVHD, respectively. Factors representing emotional well-being were significantly improved based on the patient-reported QOL evaluation using SF-36. The effect of imatinib on steroid tapering, which was notable in responders, was also present in 50% of those who achieved SD without worsening cGVHD. Imatinib exhibited therapeutic efficacy in steroid-refractory and steroid-dependent cGVHD with tolerable toxicity.Clinical Trial Registration: KCT0006785.

Changes in Isoflavone Profile from Soybean Seeds during Cheonggukjang Fermentation Based on High-Resolution UPLC-DAD-QToF/MS: New Succinylated and Phosphorylated Conjugates.

In this study, thirty-eight isoflavone derivatives were comprehensively identified and quantified from the raw, steamed and fermented seeds of four selected soybean cultivars based on UPLC-DAD-QToF/MS results with reference to the previously reported LC-MS library and flavonoid database, and summarized by acylated group including glucosides (Glu), malonyl-glucosides (Mal-Glu), acetyl-glucosides (Ac-Glu), succinyl-glucosides (Suc-Glu) and phosphorylated conjugates (Phos) in addition to aglycones. Among them, Suc-Glu and Phos derivatives were newly generated due to fermentation by B. subtilis AFY-2 (cheonggukjang). In particular, Phos were characterized for the first time in fermented soy products using Bacillus species. From a proposed roadmap on isoflavone-based biotransformation, predominant Mal-Glu (77.5-84.2%, raw) decreased rapidly by decarboxylation and deesterification into Ac-Glu and Glu (3.5-8.1% and 50.0-72.2%) during steaming, respectively. As fermentation continued, the increased Glu were mainly succinylated and phosphorylated as well as gradually hydrolyzed into their corresponding aglycones. Thus, Suc-Glu and Phos (17.3-22.4% and 1.5-5.4%, 36 h) determined depending on cultivar type and incubation time, and can be considered as important biomarkers generated during cheonggukjang fermentation. Additionally, the changes of isoflavone profile can be used as a fundamental report in applied microbial science as well as bioavailability research from fermented soy foods.

Favorable Long-Term Outcomes with Autologous Stem Cell Transplantation for High-Risk Multiple Myeloma Patients with a Positive Result On 18F-FDG PET/CT at Baseline.

BACKGROUND: 18F-fluorodeoxyglucose positron emission tomography/computed tomography (18F-FDG PET/CT) is a useful tool for identifying high-risk features in patients with newly diagnosed multiple myeloma (NDMM). This study evaluated the role of autologous stem cell transplantation (ASCT) in patients presenting with positive results on PET/CT scans. MATERIALS AND METHODS: The medical records of 210 patients who underwent PET/CT at diagnosis were retrospectively reviewed. Eligible patients for transplantation proceeded to upfront ASCT with high-dose chemotherapy (HDT) after induction therapy with novel agents. RESULTS: The presence of a number of focal lesions (FL) >3 and extramedullary disease (EMD) occurred in 111 and 35 patients, respectively. ASCT was performed in 54 patients. Among patients with FL > 3, those treated with ASCT showed a prolonged 2-year progression-free survival (PFS) and overall survival (OS) rates compared to those not treated with ASCT (PFS, 60.2% vs. 23.5%, P < 0.001; OS, 91.7% vs. 63.6%, P = 0.005). In patients with FL ≤ 3, treatment by ASCT was associated with a higher 2-year PFS rate than no treatment by ASCT (74.0% vs. 54.9%, P = 0.040). The OS of patients treated with ASCT was not significantly longer than that of patients not treated with ASCT (P = 0.115). In multivariate analysis, FL > 3, Revised International Staging System (R-ISS), and upfront ASCT were independent prognostic factors for PFS and OS. CONCLUSION: Presenting FL > 3 on baseline PET/CT represents a high-risk feature in patients with NDMM. Frontline ASCT with HDT prolonged the survival of patients with FL > 3.

Intaglio Contact Printing of Versatile Carbon Nanotube Composites and Its Applications for Miniaturizing High-Performance Devices.

Composites based on carbon nanotubes (CNTs) are promising patternable materials that can be engineered to incorporate the outstanding properties of CNTs into various applications via printing technologies. However, conventional printing methods for CNTs require further improvement to overcome the major drawbacks that limit the patterning resolution and target substrate. Herein, an intaglio contact printing method based on a CNT/paraffin composite is presented for realizing highly precise CNT network patterns without restrictions on the substrate. In this method, the CNT/paraffin composite can be patterned with a high resolution (<10 µm) and neatly transferred onto various substrates with a wide range of surface energies, including human skin. The patterned composite exhibits high durability against structural deformations, and structural damage caused by fatigue accumulation can be cured in a few seconds. In addition, miniaturized sensing and energy-harvesting applications are demonstrated with high performances. The present method facilitates the rapid fabrication of highly precise interdigitated electrodes via one-step printing, enabling high-performance operation and miniaturization of the devices. It is anticipated that these results will not only spur the further development of various applications of CNTs but also contribute to advances in soft lithography methods applicable to many fields of science and engineering.

Dynamic properties of floating floor system and its influence on heavy-weight impact sound in residential buildings.

We investigated the effects of a floating floor on heavy impact sound in the low-frequency range below 100 Hz with focus on the structural vibration. To verify the mechanism of amplifying the floor impact sound, field measurements were conducted before and after the installation of a floating floor while the other conditions were kept constant. Field tests were performed on five apartment units where the material properties of the resilient materials in the floating floors differed. Slab accelerations and sound pressure levels were measured simultaneously. The test results indicated that the low-frequency responses of slab acceleration and the corresponding heavy impact sounds were amplified in all apartment units after the installation of the floating floor, while high-frequency responses greater than 100 Hz were significantly reduced. The amplified responses were attributed to the interactions between the mortar plate (floating floor) and concrete slab, which were connected by a resilient material layer. The degree of amplification tended to increase as the loss factor of the resilient material decreased while the amplified frequency range was determined by the stiffness of the resilient material layer. The result was numerically verified using a simplified mass-spring model.

Flexible and Stretchable Liquid Metal Electrodes Working at Sub-Zero Temperature and Their Applications.

We investigated characteristics of highly flexible and stretchable electrodes consisting of Galinstan (i.e., a gallium-based liquid metal alloy) under various conditions including sub-zero temperature (i.e., <0 °C) and demonstrated solar-blind photodetection via the spontaneous oxidation of Galinstan. For this work, a simple and rapid method was introduced to fabricate the Galinstan electrodes with precise patterns and to exfoliate their surface oxide layers. Thin conductive films possessing flexibility and stretchability can be easily prepared on flexible substrates with large areas through compression of a dried suspension of Galinstan microdroplets. Furthermore, a laser marking machine was employed to facilitate patterning of the Galinstan films at a high resolution of 20 µm. The patterned Galinstan films were used as flexible and stretchable electrodes. The electrical conductivity of these electrodes was measured to be ~1.3 × 106 S m-1, which were still electrically conductive even if the stretching ratio increased up to 130% below 0 °C. In addition, the surface oxide (i.e., Ga2O3) layers possessing photo-responsive properties were spontaneously formed on the Galinstan surfaces under ambient conditions, which could be solely exfoliated using elastomeric stamps. By combining Galinstan and its surface oxide layers, solar-blind photodetectors were successfully fabricated on flexible substrates, exhibiting a distinct increase of up to 14.7% in output current under deep ultraviolet irradiation (254 nm wavelength) with an extremely low light intensity of 0.1 mW cm-2, whereas no significant change was observed under visible light irradiation.

Surface and Interface Engineering for Organic Device Applications.

In last few decades, organic materials (or carbon-based materials in a broad sense) including polymers have received much attention for their potential applications in electronics, because they have outstanding advantages such as high processibility, mechanical flexibility, and low weight [...].

Characterization of Saponins from Various Parts of Platycodon grandiflorum Using UPLC-QToF/MS.

Platycodon grandiflorum (PG) is known as a high-potential material in terms of its biological activity. The objective of this report is to provide chromatographic and mass fragment ion data of 38 simultaneously identified saponins, including novel compounds, by analyzing them through ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-QToF/MS). In so doing, we investigated their diverse conditions, including morphological parts (stems, roots, buds, and leaves), peeling (or not), and blanching of PG. The total contents of individual saponins indicated an order of roots (containing peel, 1674.60 mg/100 g, dry weight) > buds (1364.05) > roots (without peel, 1058.83) ≈ blanched roots (without peel, 945.17) ≈ stems (993.71) ≈ leaves (881.16). When considering three types of aglycone, the platycodigenin group (55.04 ~ 68.34%) accounted for the largest proportion of the total content, whereas the platycogenic acid A group accounted for 17.83 ~ 22.61%, and the polygalacic acid group represented 12.06 ~ 22.35%. As they are classified as major compounds, novel saponins might be utilized for their role in healthy food for human consumption. Additionally, during blanching, the core temperature of PG was satisfied with the optimal condition, thus activating the enzymes related to biotransformation. Furthermore, through the use of this comprehensive data, additional studies related to buds, as well as roots or the characterization of individual saponins, can be conducted in a rapid and achievable manner.