Development of a FRET aptasensor based on MoS2-doped Zn-MOF as luminophore for selective detection of cadmium in aqueous solutions.

A robust "on-off" fluorescent aptasensor was developed using nanohybrids of molybdenum sulfide (MoS2) quantum dot (QD)-doped zinc metal-organic frameworks (Zn-MOF) for selective and sensitive detection of cadmium ions (Cd2+) in water. This nanohybrid (MoS2@Zn-MOF), synthesized via "bottle around the ship" methodology, exhibited a high-intensity fluorescence emission centered at 430 nm (λEm) (blue) on excitation at 320 nm (λEx). Further, the conjugation of this fluorophore to phosphate-modified cadmium aptamer (Cd-2-2) was achieved through carbodiimide reaction. The hybridization of prepared sensing probe (MoS2@Zn-MOF/Cd-2-2 aptamer) was done with dabcyl-conjugated complementary DNA (cDNA), acting as energy donor-acceptor pair in the fluorescence resonance energy transfer (FRET) system. This hybridization causes the fluorescence quenching of the nanohybrid. In the presence of Cd2+, the aptamer from the fabricated nano-biosensing probe binds to these ions, resulting in release of dabcyl-cDNA oligomer. This release of dabcyl-cDNA oligomer from the sensing probes restores the fluorescence of the nanohybrid. Under optimized conditions (sensing probe/dabcyl-cDNA ratio 1/7, pH 7.4, and temp 28 °C), the sensing probe showed a fast response time of 1 min. The fluorescence intensity of the nanohybrid can be utilized to determine the concentration of Cd2+. The proposed aptasensor achieved highly sensitive detection of Cd2+ with a limit of detection (LOD) of 0.24 ppb over the range of 1 × 10-9 to 1 × 10-4 M along with minimal effects of interferences (e.g., Hg2+, Pb2+, and Zn2+) and good reproducibility. The designed aptasensor based on MoS2@Zn-MOF nanofluorophore offers a highly sensitive and selective approach for rapid screening of metal ions in aqueous environments.

Titanium dioxide-supported mercury photocatalysts for oxidative removal of hydrogen sulfide from the air using a portable air purification unit.

Photocatalytic removal of gaseous hydrogen sulfide (H2S) has been studied through the control of key process variables using a prototype air purifier (AP) fabricated with titanium dioxide (TiO2)-supported mercury. The performance of Hg/TiO2 systems, prepared with different Hg mass proportions over TiO2 (such as 0.1%, 1%, 2%, and 5%), is measured against 5 ppm H2S at 160 L min-1 under UV irradiation. Accordingly, their removal efficiency (RE) values after 360 s are 40.3%, 74.8%, 99.3%, and 99.9%, respectively (relative to 33.5% of AP (TiO2)). An AP with a 2% Hg/TiO2 unit achieves a clean air delivery rate of 32 L min-1 with kinetic reaction rate (r (at 10% RE)) of 0.774 mmol h-1 g-1, quantum yield of 2.19E-02 molecules photon-1, and space-time yield of 1.46E-04 molecules photon-1 mg-1. The superior photocatalytic performance of Hg/TiO2 is supported by superoxide anion and hydroxyl radicals formed in dry air and humid nitrogen (N2) environments, respectively. A density functional theory simulation suggests that the presence of oxygen vacancies should promote the disparities in the electronic structure to subsequently affect the reaction pathways and energetics. The presence of moisture enhances the robust formation of a mercury-OH bond to favorably yield ß-mercury sulfide from H2S.

Proanthocyanidins and Phenolic Compounds from the Twigs of Salix chaenomeloides and Their Anti-Lipogenic Effects on 3T3-L1 Preadipocytes.

The present study investigated potential bioactive natural products from the EtOH extract of Salix chaenomeloides twigs using column chromatography, leading to the isolation of six compounds (1-6), which were characterized as two proanthocyanidins, procyanidin B2 (1) and procyanidin B1 (2), and four phenolic compounds, 4-hydroxybenzoic acid ß-D-glucosyl ester (3), di-O-methylcrenatin (4), p-coumaric acid glucoside (5), and syringin (6) by the comparison of their NMR spectra with the reported data and high-resolution (HR)-electrospray ionization mass spectroscopy (ESI-MS) analysis. We investigated the potential of six compounds (1-6) to inhibit adipogenesis in 3T3-L1 preadipocytes, which showed that the compounds (1-6) significantly reduced lipid accumulation in 3T3-L1 adipocytes without affecting cell proliferation. Notably, compound 1 demonstrated a remarkable 60% and 90% reduction in lipid levels with 50 and 100 µM treatments, respectively. Oil Red O staining results indicated that compound 1 significantly inhibits the formation of lipid droplets, comparable to the effect of T863, an inhibitor of triglyceride used as a positive control, in adipocytes. Compound 1 had no effect on the regulators PPARγ, C/EBPα, and SREBF1 of adipocyte differentiation in 3T3-L1 preadipocytes, but compound 1 activated the fatty acid oxidation regulator, PPARα, compared to the lipogenic-induced control. It also suppressed fatty acid synthesis by downregulating the expression of fatty acid synthase (FAS). Finally, compound 1 induced the mRNA and protein levels of CPT1A, an initial marker of mitochondrial fatty acid oxidation in 3T3-L1. This finding substantiates the anti-lipogenic and lipolytic effects of procyanidin B2 (1) in 3T3-L1 preadipocytes, emphasizing its pivotal role in modulating obesity-related markers.

Prediction of apparent total tract digestion of crude protein in adult dogs.

To predict the apparent total tract digestibility (ATTD) of crude protein (CP) in dogs we developed an in vitro system using an in vitro digestion method and a statistical analysis. The experimental diets used chicken meat powder as the protein source, with CP levels of 20% (22.01%, analyzed CP value as dry-based), 30% (31.35%, analyzed CP value as dry-based), and 40% (41.34%, analyzed CP value as dry-based). To simulate in vivo digestive processes a static in vitro digestion was performed in two steps; stomach and small intestine. To analyze ATTD the total fecal samples were collected in eight neutered beagle dogs during the experimental period. CP digestibility was calculated by measuring CP levels in dog food, in vitro undigested fraction, and dog feces. In result, CP digestibility at both in vivo and in vitro was increased with increasing dietary CP levels. To estimate in vivo digestibility the co-relation of in vivo ATTD and in vitro digestibility was investigated statistically and a regression equation was developed to predict the CP ATTD (% = 2.5405 × in vitro CP digestibility (%) + 151.8). The regression equation was evaluated its feasibility by using a commercial diet. The predicted CP digestibility which was calculated by the regression equation showed high index of similarity (100.16%) with that of in vivo in dogs. With that, it would be a feasible non-animal method to predict in vivo CP digestibility by using in vitro digestion method and the proposed linear regression equation in adult dogs.

The effects of metal-oxide content in MnO2-activated carbon composites on reactive adsorption and catalytic oxidation of formaldehyde and toluene in air.

The deterioration in air quality caused by volatile organic compounds (VOCs) has become an important environmental issue. Here, activated carbon (AC) composites with manganese oxide (MnO2: 1 % to 50 %) are synthesized as MAC for the removal of formaldehyde (FA) and toluene in air through a combination of reactive adsorption and catalytic oxidation (RACO) at room temperature (RT). The best-performing composite (MAC-20: 20 % of MnO2) exhibits a 10 % breakthrough volume (BTV10%) of FA and toluene at 41.2 and 377 L g-1, respectively while realizing complete oxidation of FA and toluene into carbon dioxide (CO2) at 100 °C and 275 °C, respectively. The reaction kinetic rates (r) for 10 % removal efficiency of FA and toluene (XFA or T) at RT are estimated as 9.82E-02 and 3.20E-02 mmol g-1 h-1, respectively. The high performance of MAC-20 can be attributed to its enriched adsorption capacity of oxygen vacancy (OV) and the presence of adsorbed oxygen (OA), as shown by an Mn3+/Mn4+ ratio of 0.729 and an OA/lattice­oxygen (OL) ratio of 1.50. The results of this study highlight the interactive roles of oxygen abundance and temperature in the generation of distinctive oxidation patterns for FA in reference to toluene. This study is expected to offer practical guidance for the implementation of RACO against diverse VOCs for efficient management of air quality.

The practical utility of ternary nickel-cobalt-manganese oxide-supported platinum catalysts for room-temperature oxidative removal of formaldehyde from the air.

Formaldehyde (FA), a carcinogenic oxygenated volatile organic compound, is present ubiquitously in indoor air. As such, it is generally regarded as a critical target for air quality management. The oxidative removal of FA under dark and room-temperature (RT) conditions is of practical significance. A series of ternary nickel-cobalt-manganese oxide-supported platinum catalysts (Pt/NiCoMnO4) have been synthesized for FA oxidative removal at RT in the dark. Their RT conversion values for 50 ppm FA (XFA) at 5,964 h-1 gas hourly space velocity (GHSV) decrease in the following order: 1 wt% Pt/NiCoMnO4 (100 %) > 0.5 wt% Pt/NiCoMnO4 (25 %) > 0.05 wt% Pt/NiCoMnO4 (14 %) > NiCoMnO4 (6 %). The catalytic performance of 1 wt% Pt/NiCoMnO4 has been examined further under the control of various process variables (e.g., catalyst mass, flow rate, relative humidity, FA concentration, time on stream, and molecular oxygen content). The catalytic oxidation of FA at low temperatures (e.g., RT and 60 °C) is accounted for by Langmuir-Hinshelwood mechanism (single-site competitive-adsorption), while Mars van Krevelen kinetics is prevalent at higher temperatures. In situ diffuse-reflectance infrared Fourier-transform spectroscopy reveals that FA oxidation proceeds through a series of reaction intermediates such as DOM, HCOO-, and CO32-. Based on the density functional theory simulations, the unique electronic structures of the nearest surface atoms (platinum and nickel) are suggested to be responsible for the superior catalytic activity of Pt/NiCoMnO4.

Endoscopic ultrasound-guided tissue sampling induced pancreatic duct leak resolved by the placement of a pancreatic stent: A case report.

BACKGROUND: Pancreatic ductal leaks complicated by endoscopic ultrasonography-guided tissue sampling (EUS-TS) can manifest as acute pancreatitis. CASE SUMMARY: A 63-year-old man presented with persistent abdominal pain and weight loss. Diagnosis: Laboratory findings revealed elevated carbohydrate antigen 19-9 (5920 U/mL) and carcinoembryonic antigen (23.7 ng/mL) levels. Magnetic resonance imaging of the pancreas revealed an approximately 3 cm ill-defined space-occupying lesion in the inferior aspect of the head, with severe encasement of the superior mesenteric artery. Pancreatic ductal adenocarcinoma was confirmed after pathological examination of specimens obtained by EUS-TS using the fanning method. Interventions and outcomes: The following day, the patient experienced severe abdominal pain with high amylase (265 U/L) and lipase (1173 U/L) levels. Computed tomography of the abdomen revealed edematous wall thickening of the second portion of the duodenum with adjacent fluid collections and a suspicious leak from either the distal common bile duct or the main pancreatic duct in the head. Endoscopic retrograde cholangiopancreatography revealed dye leakage in the head of the main pancreatic duct. Therefore, a 5F 7 cm linear plastic stent was deployed into the pancreatic duct to divert the pancreatic juice. The patient's abdominal pain improved immediately after pancreatic stent insertion, and amylase and lipase levels normalized within a week. Neoadjuvant chemotherapy was then initiated. CONCLUSION: Using the fanning method in EUS-TS can inadvertently cause damage to the pancreatic duct and may lead to clinically significant pancreatitis. Placing a pancreatic stent may immediately resolve acute pancreatitis and shorten the waiting time for curative therapy. When using the fanning method during EUS-TS, ductal structures should be excluded to prevent pancreatic ductal leakage.

Secondary metabolites and transcriptomic analysis of novel pulcherrimin producer Metschnikowia persimmonesis KIOM G15050: A potent and safe food biocontrol agent.

Metschnikowia persimmonesis, a novel endophytic yeast strain isolated from Diospyros kaki calyx, possesses strong antimicrobial activity. We investigated its potential use as an environmentally safe food biocontrol agent through genomics, transcriptomics, and metabolomics. Secondary metabolites were isolated from M. persimmonesis, followed by chemical structure elucidation, PUL gene cluster identification, and RNA sequencing. Pulcherrimin was isolated using 2 M NaOH, its structure was confirmed, and the yield was quantified. Biocontrol efficacy of M. persimmonesis on persimmon fruits and calyx was evaluated by assessing lesion diameter and disease incidence. Following compounds were isolated from M. persimmonesis co-culture with Botrytis cinerea and Fusarium oxysporum: fusaric acid, benzoic acid, benzeneacetic acid, 4-hydroxybenzeneacetic acid, 4-(-2-hydoxyethyl)-benzoic acid, cyclo (Leu-Leu), benzenemethanol, 4-hydroxy-benzaldehide, 2-hydroxy-4-methoxy-benzoic acid, 4-hydroxy-benzoic acid, lumichrome, heptadecanoic acid, and nonadecanoic acid. Exposing M. persimmonesis to different growth media conditions (with or without sugar) resulted in the isolation of five compounds: Tyrosol, Cyclo (Pro-Val), cyclo(L-Pro-L-Tyr), cyclo(Leu-Leu), and cyclo(l-tyrosilylicine). Differentially expressed gene analysis revealed 3264 genes that were significantly expressed (fold change ≥2 and p-value ≤0.05) during M. persimmonesis growth in different media, of which only 270 (8.27%) showed altered expression in all sample combinations with Luria-Bertani Agar as control. Minimal media with ferric ions and tween-80 triggered the most gene expression changes, with the highest levels of PUL gene expression and pulcherrimin yield (262.166 mg/L) among all media treatments. M. persimmonesis also produced a higher amount of pulcherrimin (209.733 mg/L) than Metschnikowia pulcherrima (152.8 mg/L). M. persimmonesis inhibited the growth of Fusarium oxysporum in persimmon fruit and calyx. Toxicity evaluation of M. persimmonesis extracts showed no harmful effects on the liver and mitochondria of zebrafish, and no potential risk of cardiotoxicity in hERG-HEK293 cell lines. Thus, M. persimmonesis can be commercialized as a potent and safe biocontrol agent for preserving food products.

Metabolic Comparison and Molecular Networking of Antimicrobials in Streptomyces Species.

Streptomyces are well-known for producing bioactive secondary metabolites, with numerous antimicrobials essential to fight against infectious diseases. Globally, multidrug-resistant (MDR) microorganisms significantly challenge human and veterinary diseases. To tackle this issue, there is an urgent need for alternative antimicrobials. In the search for potent agents, we have isolated four Streptomyces species PC1, BT1, BT2, and BT3 from soils collected from various geographical regions of the Himalayan country Nepal, which were then identified based on morphology and 16S rRNA gene sequencing. The relationship of soil microbes with different Streptomyces species has been shown in phylogenetic trees. Antimicrobial potency of isolates was carried out against Staphylococcus aureus American Type Culture Collection (ATCC) 43300, Shigella sonnei ATCC 25931, Salmonella typhi ATCC 14028, Klebsiella pneumoniae ATCC 700603, and Escherichia coli ATCC 25922. Among them, Streptomyces species PC1 showed the highest zone of inhibition against tested pathogens. Furthermore, ethyl acetate extracts of shake flask fermentation of these Streptomyces strains were subjected to liquid chromatography-tandem mass spectrometric (LC-MS/MS) analysis for their metabolic comparison and Global Natural Products Social Molecular Networking (GNPS) web-based molecular networking. We found very similar metabolite composition in four strains, despite their geographical variation. In addition, we have identified thirty-seven metabolites using LC-MS/MS analysis, with the majority belonging to the diketopiperazine class. Among these, to the best of our knowledge, four metabolites, namely cyclo-(Ile-Ser), 2-n-hexyl-5-n-propylresorcinol, 3-[(6-methylpyrazin-2-yl) methyl]-1H-indole, and cyclo-(d-Leu-l-Trp), were detected for the first time in Streptomyces species. Besides these, other 23 metabolites including surfactin B, surfactin C, surfactin D, and valinomycin were identified with the help of GNPS-based molecular networking.

Evaluation of Esthetic Results after Mass Removal with Elliptical Skin Excision Using Ultrasonography to Measure Skin Thickness.

Background: The growth of benign cutaneous masses causes the overlaying skin to expand and become thinner, especially at the central, most projected point. In this retrospective study, a surgical technique comprising an elliptical skin excision was employed to account for these skin changes. Methods: This retrospective study enrolled 980 patients with benign masses. Preoperatively, all patients underwent ultrasonography to evaluate the mass depth and thickness of the attached skin, and mass excision was performed using the elliptical skin-excision method. The operative time was recorded, and complications and esthetic outcomes were assessed using the Cutometer® and the modified Vancouver Scar Scale (mVSS) during 1- and 3-month follow-up visits. Results: The mean operative time (17.48 ± 3.46 min) was significantly shorter than that of conventional methods (p < 0.05). Cutometer parameters showed no significant differences from those of intact skin. The average mVSS scores were 5.21 ± 1.42 and 3.50 ± 1.79 at 1- and 3-month follow-ups, respectively. Conclusions: Mass excision with an elliptical skin attachment resulted in improved esthetic results and easy removal. The attached skin enabled convenient handling without damaging the capsule or other adjacent structures, leaving a thick dermis on both wound edges. Thus, this technique resulted in minimal scarring.

Sporosarcina jeotgali sp. nov., Sporosarcina oncorhynchi sp. nov., and Sporosarcina trichiuri sp. nov., Isolated from Jeotgal, a Traditional Korean Fermented Seafood.

Three novel, Gram-stain-positive, obligate aerobic, catalase- and oxidase-positive bacterial strains, designated B2O-1T, T2O-4T, and 0.2-SM1T-5T, were isolated from jeotgal, a traditional Korean fermented seafood. Strains B2O-1T, T2O-4T, and 0.2-SM1T-5T exhibited distinct colony colors, characterized by pink, yellow, and red opaque circular colonies, respectively. Phylogenetic analysis revealed that three strains formed a paraphyletic clade within the genus Sporosarcina and shared < 99.0% similarity with Sporosarcina aquimarina KCTC 3840T and Sporosarcina saromensis KCTC 13119T in their 16S rRNA gene sequences. The three strains exhibiting Orthologous Average Nucleotide Identity values < 79.3% and digital DNA-DNA hybridization values < 23.1% within the genus Sporosarcina affirmed their distinctiveness. Strains B2O-1T, T2O-4T, and 0.2-SM1T-5T contained MK-7 as a sole respiratory menaquinone and A4α type peptidoglycan based on lysine with alanine, glutamic acid, and aspartic acid. The common polar lipids include diphosphatidylglycerol, phosphatidylglycerol, and phosphatidylethanolamine. Strain T2O-4T contained one unidentified phospholipid, whereas strain 0.2-SM1T-5T contained two unidentified phospholipids. Cellular fatty acid profiles, with C15:0 anteiso as the major fatty acid, supported the affiliation of the three strains to the genus Sporosarcina. Based on the polyphasic characteristics, strains B2O-1T (= KCTC 43506T = JCM 36032T), T2O-4T (= KCTC 43489T = JCM 36031T), and 0.2-SM1T-5T (= KCTC 43519T = JCM 36034T) represent three novel species within the genus Sporosarcina, named Sporosarcina jeotgali sp. nov., Sporosarcina oncorhynchi sp. nov., and Sporosarcina trichiuri sp. nov., respectively.

Novel kinetic modeling of photocatalytic degradation of ethanol and acetaldehyde in air by commercial and reduced ZnO: Effect of oxygen vacancies and humidity.

A comprehensive kinetic model has been developed to address the factors and processes governing the photocatalytic removal of gaseous ethanol by using ZnO loaded in a prototype air purifier. This model simultaneously tracks the concentrations of ethanol and acetaldehyde (as its primary oxidation product) in both gas phase and on the catalyst surface. It accounts for reversible adsorption of both compounds to assign kinetic reaction parameters for different degradation pathways. The effects of oxygen vacancies on the catalyst have been validated through the comparative assessment on the catalytic performance of commercial ZnO before and after the reduction pre-treatment (10% H2/Ar gas at 500 °C). The influence of humidity has also been assessed by partitioning the concentrations of water molecules across the gas phase and catalyst surface interface. Given the significant impact of adsorption on photocatalytic processes, the beginning phases of all experiments (15 min in the dark) are integrated into the model. Results showcase a notable decrease in the adsorption removal of ethanol and acetaldehyde with an increase in relative humidity from 5% to 75%. The estimated number of active sites, as determined by the model, increases from 7.34 10-6 in commercial ZnO to 8.86 10-6 mol gcat-1 in reduced ZnO. Furthermore, the model predicts that the reaction occurs predominantly on the catalyst surface while only 14% in the gas phase. By using quantum yield calculations, the optimal humidity level for photocatalytic degradation is identified as 25% with the highest quantum yield of 6.98 10-3 (commercial ZnO) and 10.41 10-3 molecules photon-1 (reduced ZnO) catalysts.

Anti-competitive adsorption of gaseous benzene on hydrophilic microporous carbon in humid conditions.

The adsorption capture of ambient volatile organic compounds (VOCs) is of practical importance for air quality management. Herein, unique anti-competitive adsorption behavior of benzene on a hydrophilic activated carbon (Procarb-900 (P900)) is evidenced in the presence of competing components (e.g., formaldehyde (FA) and/or moisture). Contrary to general expectations, the adsorption capacity of 10 Pa benzene (QB) onto P900 (30 mg) at the 99 % breakthrough level improves from 144.8 to 187 mg g-1 as the relative humidity (RH) increases from 0 to 25 %. Such pattern is maintained at 183.9 mg g-1 even at the relatively high RH of 50 %. Furthermore, QB exhibits a remarkable increase of 56.1 % (to 226.0 mg g-1) in the binary phase (100 ppm benzene plus 50 ppm FA) relative to its single phase (144.8 mg g-1). The kinetic studies confirm the occurrence of anti-competitive adsorption of benzene under humid conditions with the unusual decrease in rate constants at the elevated RHs (i.e., 25 and 50 %). The thermodynamic studies suggest the exothermic nature of benzene adsorption onto P900. The hydrophilicity of P900's outer surface promotes the preferential adsorption of polar FA and water vapor over non-polar benzene, which deforms the activated carbon texture and lowers the pore size distribution (PSD). The narrow PSD enhances benzene uptake in the complex systems due to the confinement effect. Overall, this study offers insights into the unique anti-competitive adsorption of non-polar VOCs (e.g., benzene) on hydrophilic microporous adsorbents in the presence of potential interferences such as polar water vapor and FA. These findings offer a guideline for the practical implementation of adsorption techniques for gaseous VOCs in humid conditions.

Plasma enhanced atomic layer deposition of silicon nitride using magnetized very high frequency plasma.

To obtain high-quality SiNxfilms applicable to an extensive range of processes, such as gate spacers in fin field-effect transistors (FinFETs), the self-aligned quadruple patterning process, etc, a study of plasma with higher plasma density and lower plasma damage is crucial in addition to study on novel precursors for SiNxplasma-enhanced atomic layer deposition (PEALD) processes. In this study, a novel magnetized PEALD process was developed for depositing high-quality SiNxfilms using di(isopropylamino)silane (DIPAS) and magnetized N2plasma at a low substrate temperature of 200 °C. The properties of the deposited SiNxfilms were analyzed and compared with those obtained by the PEALD process using a non-magnetized N2plasma source under the same conditions. The PEALD SiNxfilm, produced using an external magnetic field (ranging from 0 to 100 G) during the plasma exposure step, exhibited a higher growth rate (∼1 Å/cycle) due to the increased plasma density. Additionally, it showed lower surface roughness, higher film density, and enhanced wet etch resistance compared to films deposited using the PEALD process with non-magnetized plasmas. This improvement can be attributed to the higher ion flux and lower ion energy of the magnetized plasma. The electrical characteristics, such as interface trap density and breakdown voltage, were also enhanced when the magnetized plasma was used for the PEALD process. Furthermore, when SiNxfilms were deposited on high-aspect-ratio (30:1) trench patterns using the magnetized PEALD process, an improved step coverage of over 98% was achieved, in contrast to the conformality of SiNxdeposited using non-magnetized plasma. This enhancement is possibly a result of deeper radical penetration enabled by the magnetized plasma.

Characterization of Chemical Interactions between Clinical Drugs and the Oral Bacterium, Corynebacterium matruchotii, via Bioactivity-HiTES.

In the field of natural product research, the rediscovery of already-known compounds is one of the significant issues hindering new drug development. Recently, an innovative approach called bioactivity-HiTES has been developed to overcome this limitation, and several new bioactive metabolites have been successfully characterized by this method. In this study, we applied bioactivity-HiTES to Corynebacterium matruchotii, the human oral bacterium, with 3120 clinical drugs as potential elicitors. As a result, we identified two cryptic metabolites, methylindole-3-acetate (MIAA) and indole-3-acetic acid (IAA), elicited by imidafenacin, a urinary antispasmodic drug approved by the Japanese Pharmaceuticals and Medical Devices Agency (PMDA). MIAA showed weak antibacterial activity against a pulmonary disease-causing Mycobacterium conceptionense with an IC50 value of 185.7 µM. Unexpectedly, we also found that C. matruchotii metabolized fludarabine phosphate, a USFDA-approved anticancer drug, to 2-fluoroadenine which displayed moderate antibacterial activity against both Bacillus subtilis and Escherichia coli, with IC50 values of 8.9 and 20.1 µM, respectively. Finally, acelarin, a prodrug of the anticancer drug gemcitabine, was found to exhibit unreported antibacterial activity against B. subtilis with an IC50 value of 33.6 µM through the bioactivity-HiTES method as well. These results indicate that bioactivity-HiTES can also be applied to discover biotransformed products in addition to finding cryptic metabolites in microbes.

Determination of the Absolute Configuration of Secondary Alcohols in a Compound Mixture via the Application of Competing Enantioselective Acylation Coupled with LC/MS Analysis.

The determination of natural product stereochemistry plays a significant role in drug discovery and development. Understanding the stereochemistry of natural products is essential for predicting and optimizing their interactions with biological targets, which, in turn, influences their therapeutic efficacy, safety, and overall impact on living organisms. Here, we present the first application of competitive enantioselective acylation (CEA) reactions in conjunction with LC/MS analysis for determining the absolute configuration of secondary alcohols in natural products which were purified as a mixture. This approach utilizes the enantiomeric pair of HBTM (homobenzotetramisole) catalysts, demonstrating sufficient kinetic resolution for the acylation of secondary alcohols. The rapid reaction kinetics were quantitatively estimated with LC/MS analysis as the characterization technique for the enantioselective transformations. Our study has expanded the application of the CEA reaction coupled with LC/MS analysis to mixtures. Utilizing LC/MS analysis, the CEA reaction offers a sensitive and simple method for stereochemistry determination. Additionally, the application of the CEA reaction is cost/time-effective since only small quantities of substrates and a short reaction time are required for characterizing the absolute configuration of secondary alcohols in natural products compared to other conventional methods.

Quality Indicators of Endoscopic Retrograde Cholangiopancreatography in Korea.

Endoscopic retrograde cholangiopancreatography (ERCP) is a procedure that requires significant experiences and skills and has various procedure-related complications, some of which can be severe and even result in the death of patients. Expanding ERCP availability has the advantage of increasing accessibility for patients. However, ERCP poses a substantial risk if performed without proper quality management. ERCP quality management is essential for both ensuring safe and successful procedures and meeting the social demands for enhanced healthcare competitiveness and quality assurance. To address these concerns, the Korean Pancreatobiliary Association established a task force to develop ERCP quality indicators (QIs) tailored to the Korean medical environment. Key questions for five pre-procedure, three intra-procedure, and four post-procedure measures were formulated based on a literature search related to ERCP QIs and a comprehensive clinical review conducted by experts. The statements and recommendations regarding each QI item were selected through peer review. The developed ERCP QIs were reviewed by external experts based on the latest available evidence at the time of development. These domestically tailored ERCP QIs are expected to contribute considerably to improving ERCP quality in Korea.

Chaenomelin, a New Phenolic Glycoside, and Anti-Helicobacter pylori Phenolic Compounds from the Leaves of Salix chaenomeloides.

Salix chaenomeloides Kimura, commonly known as pussy willow, is a deciduous shrub and tree belonging to the Salicaceae family. The genus Salix spp. has been known as a healing herb for the treatment of fever, inflammation, and pain relief. The current study aimed to investigate the potential bioactive natural products from S. chaenomeloides leaves and evaluate their antibacterial activity against Helicobacter pylori. A phytochemical investigation of the ethanol (EtOH) extract of S. chaenomeloides leaves led to the isolation of 13 phenolic compounds (1-13) from the ethyl acetate (EtOAc) fraction, which showed antibacterial activity against H. pylori strain 51. The chemical structure of a new phenolic glycoside, chaenomelin (1), was established by a detailed analysis of 1D and 2D (1H-1H correlation spectroscopy (COSY), heteronuclear single-quantum coherence (HSQC), and heteronuclear multiple-bond correlation (HMBC)) nuclear magnetic resonance (NMR), high-resolution electrospray ionization mass spectroscopy (HR-ESIMS), and chemical reactions. The other known compounds were identified as 5-O-trans-p-coumaroyl quinic acid methyl ester (2), tremulacin (3), citrusin C (4), benzyl 3-O-ß-d-glucopyranosyl-7-hydroxybenzoate (5), tremuloidin (6), 1-[O-ß-d-glucopyranosyl(1→2)-ß-d-glucopyranosyl]oxy-2-phenol (7), arbutin cinnamate (8), tremulacinol (9), catechol (10), 4-hydroxybenzaldehyde (11), kaempferol 3-rutinoside (12), and narcissin (13), based on the comparison of their NMR spectra with the reported data and liquid chromatography/mass spectrometry (LC/MS) analysis. The isolated compounds were evaluated for antibacterial activity against H. pylori strain 51. Among the isolates, 1-[O-ß-d-glucopyranosyl(1→2)-ß-d-glucopyranosyl]oxy-2-phenol (7) and arbutin cinnamate (8) exhibited antibacterial activity against H. pylori strain 51, with inhibitions of 31.4% and 33.9%, respectively, at a final concentration of 100 µM. These results were comparable to that of quercetin (38.4% inhibition), which served as a positive control. Generally, these findings highlight the potential of the active compounds 7 and 8 as antibacterial agents against H. pylori.

Comparative Analysis of Temperature-Responsive Hydrogel (PF 72) for Postoperative Pain After Bimaxillary Surgery: A Retro-spective Study.

Bimaxillary surgery is a painful invasive procedure in plastic surgery. Pain control is typically achieved using intravenous analgesics. We aimed to investigate the efficacy of a novel temperature-responsive hydrogel, PF72, mixed with ropivacaine, as a local pain management solution when applied directly to the surgical site following orthognathic surgery. The study was conducted from October 2022 to July 2023 and included a cohort of 40 candidates for orthognathic surgery, encompassing LeFort I maxillary ostectomy and sagittal split ramus osteotomy. The participants were divided into an Injection group (n = 20), where PF72 was administered at the surgical site before the orthognathic surgery, and a Control group (n = 20), which relied solely on intravenous analgesics. Pain was evaluated at 3, 6, 24, 48, and 72 h after surgery using a numerical rating scale (NRS). The mean NRS scores at 24 h were 6.35 and 4 for the Control and Injection groups, respectively. The mean NRS scores at 72 h were 3.4 and 2.55 for the Control and Injection groups, respectively. Patients who received PF72 experienced less pain than those who received intravenous analgesics. These findings underscore the potential of PF72 as an effective alternative for enhancing pain management in patients undergoing orthognathic surgery.Level of Evidence III Therapeutic study. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

New autophagy-modulating lanostane-type triterpenoids from a hallucinogenic poisonous mushroom Gymnopilus orientispectabilis.

Gymnopilus orientispectabilis, also known as "big laughter mushroom," is a hallucinogenic poisonous mushroom that causes excessive laughter upon ingestion. From the fruiting bodies of G. orientispectabilis, eight lanostane-type triterpenoids (1-8), including seven novel compounds: gymnojunols A-G (2-8), were isolated. The chemical structures of these new compounds (2-8) were determined by analyzing their 1D and 2D NMR spectra and HR-EISMS, and their absolute configurations were unambiguously assigned by quantum chemical ECD calculations and a computational method coupled with a statistical procedure (DP4+). Upon evaluating autophagic activity, compounds 2, 6, and 7 increased LC3B-II levels in HeLa cells to a similar extent as bafilomycin, an autophagy inhibitor. In contrast, compound 8 decreased the levels of both LC3B-I and LC3B-II, and a similar effect was observed following treatment with rapamycin, an autophagy inducer. Our findings provide experimental evidence for new potential autophagy modulators in the hallucinogenic poisonous mushroom G. orientispectabilis.