Discovering Pyramidal Treasures: Multi-Scale Design of High Strength-Ductility Titanium Alloys.

Mechanical properties of titanium alloys, one of humankind's most essential structural materials, suffer from the lack of 〈c + a〉 dislocations on pyramidal slip planes, failing homogeneous plastic strain accommodation. This mechanical treasure is not easily accessible in titanium alloys because of the required excessively high stress levels. The present work demonstrates that such a dilemma may be overcome by meticulously tuning the c/a ratio, the simplest crystallographic parameter of the hexagonal close-packed lattice, through Sn alloying. Combining this lattice-scale design concept with a cross-rolling based polycrystal-scale design solution, this study showcases a facile route to bimodal (α + ß) titanium alloys with exceptional strength-ductility synergy.

Residue-free suspended graphene transferred by perforated template.

A residue-free transfer method for graphene is proposed in this study, especially for the fabrication of suspended structures. Using perforated polymer templates, graphene can be precisely transferred onto the specific position in the perforated target SiO2/Si substrates without the need for polymer removal and the subsequent thermal annealing process. The surface of the transferred graphene by the proposed method was analyzed and corroborated via Raman spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy. The results of these analyses suggest that the graphene surface has no polymeric residues resulting from the transfer process. The proposed method provides a powerful approach for the transfer of 2D materials and it enables the exploitation of their suspended structures for device applications as well as the physical characterizations without worry on the effect of contaminants.

Effects of Curing Temperature on Bending Durability of Inkjet-Printed Flexible Silver Electrode.

Flexible electrodes should have a good mechanical durability and electrical properties under even extreme bending and deformation conditions. We fabricated such an electrode using an inkjet printing system. In addition, annealing was perfo3rmed under curing temperatures of 150, 170, and 190 °C to improve the electrical resistance performance of the electrode. Scanning electron microscopy, X-ray diffraction, nanoindentation, and surface profile measurements were performed to measure and analyze the electrode characteristics and the change in the shape of the coffee ring. The bending deformation behavior of the electrode was predicted by simulations. To confirm the bending durability of the flexible electrode according to different curing temperatures, the bending deformation and electrical resistance were simultaneously tested. It was found that the electrode cured at a temperature of 170 °C could endure 20,185 bending cycles and had the best durability, which was consistent with the predicted simulation results. Moreover, the average specific resistance before the electrode was disconnected was 13.45 µΩ cm, which is similar to the conventional electrode value. These results are expected to increase the durability and life of flexible electrodes, which can be used in flexible electronic devices, sensors, and wearable devices that are subjected to significant bending deformation.

High-Performance Stretchable Conductive Composite Fibers from Surface-Modified Silver Nanowires and Thermoplastic Polyurethane by Wet Spinning.

Highly stretchable and conductive fibers have attracted great interest as a fundamental building block for the next generation of textile-based electronics. Because of its high conductivity and high aspect ratio, the Ag nanowire (AgNW) has been considered one of the most promising conducting materials for the percolation network-based conductive films and composites. However, the poor dispersibility of AgNWs in hydrophobic polymers has hindered their application to stretchable conductive composite fibers. In this paper, we present a highly stretchable and conductive composite fiber from the co-spinning of surface-modified AgNWs and thermoplastic polyurethane (PU). The surface modification of AgNWs with a polyethylene glycol derivative improved the compatibility of PU and AgNWs, which allowed the NWs to disperse homogeneously in the elastomeric matrix, forming effective percolation networks and causing the composite fiber to show enhanced electrical and mechanical performance. The maximum AgNW mass fraction in the composite fiber was 75.9 wt %, and its initial electrical conductivity was as high as 14 205 S/cm. The composite fibers also exhibited superior stretchability: the maximum rupture strain of the composite fiber with 14.6 wt % AgNW was 786%, and the composite fiber was also conductive even when it was stretched up to 200%. In addition, 2-dimensional (2-D) Ag nanoplates were added to the AgNW/PU composite fibers to increase the stability of the conductive network under repeated stretching and releasing. The Ag nanoplates acted as a bridge to effectively prevent the AgNWs from slippage and greatly improved the stability of the conductive network.

Double-layer CVD graphene as stretchable transparent electrodes.

The stretchability of CVD graphene with a large area is much lower than that of mechanically exfoliated pristine graphene owing to the intrinsic and extrinsic defects induced during its synthesis, etch-out of the catalytic metal, and the transfer processes. This low stretchability is the main obstacle for commercial application of CVD graphene in the field of flexible and stretchable electronics. In this study, artificially layered CVD graphene is suggested as a promising candidate for a stretchable transparent electrode. In contrast to single-layer graphene (SLG), multi-layer graphene has excellent electromechanical stretchability owing to the strain relaxation facilitated by sliding among the graphene layers. Macroscopic and microscopic electromechanical tensile tests were performed to understand the key mechanism for the improved stretchability, and crack generation and evolution were systematically investigated for their dependence on the number of CVD graphene layers during tensile deformation using lateral force microscopy. The stretchability of double-layer graphene (DLG) is much larger than that of SLG and is similar to that of triple-layer graphene (TLG). Considering the transmittance and the cost of transfer, DLG can be regarded as a suitable candidate for stretchable transparent electrodes.

Measurement of urinary N-telopeptides from type I collagen using a colloidal gold-based immunoassay.

This study aimed to investigate precision of a newly developed gold nanoparticle-based immunoassay for measuring urinary N-telopeptides (NTx) and its correlation with ELISA measurement. NTx concentrations were determined by absorption changes using spectroscopy at 535 nm, which were measured three times with an interval of two hours for precision test, using urine samples of 60 subjects (32 males and 28 females; mean age 30.4 years, SD 21.9 years). The correlation of the immunoassay with the measurement of ELISA kit was also analyzed. Precision of the immunoassay and its correlation with ELISA were 0.924 (ICC, 95% confidence interval, 0.661-0.971) and 0.90 (p<0.001). Our findings suggested that this immunoassay of urinary NTx could be used as a means of screening for bone resorption and point-of-care testing.

Electrically conductive bacterial nanowires produced by Shewanella oneidensis strain MR-1 and other microorganisms.

Shewanella oneidensis MR-1 produced electrically conductive pilus-like appendages called bacterial nanowires in direct response to electron-acceptor limitation. Mutants deficient in genes for c-type decaheme cytochromes MtrC and OmcA, and those that lacked a functional Type II secretion pathway displayed nanowires that were poorly conductive. These mutants were also deficient in their ability to reduce hydrous ferric oxide and in their ability to generate current in a microbial fuel cell. Nanowires produced by the oxygenic phototrophic cyanobacterium Synechocystis PCC6803 and the thermophilic, fermentative bacterium Pelotomaculum thermopropionicum reveal that electrically conductive appendages are not exclusive to dissimilatory metal-reducing bacteria and may, in fact, represent a common bacterial strategy for efficient electron transfer and energy distribution.