TASL mediates keratinocyte differentiation by regulating intracellular calcium levels and lysosomal function.

Maintaining epidermal homeostasis relies on a tightly organized process of proliferation and differentiation of keratinocytes. While past studies have primarily focused on calcium regulation in keratinocyte differentiation, recent research has shed light on the crucial role of lysosome dysfunction in this process. TLR adaptor interacting with SLC15A4 on the lysosome (TASL) plays a role in regulating pH within the endo-lysosome. However, the specific role of TASL in keratinocyte differentiation and its potential impact on proliferation remains elusive. In our study, we discovered that TASL deficiency hinders the proliferation and migration of keratinocytes by inducing G1/S cell cycle arrest. Also, TASL deficiency disrupts proper differentiation process in TASL knockout human keratinocyte cell line (HaCaT) by affecting lysosomal function. Additionally, our research into calcium-induced differentiation showed that TASL deficiency affects calcium modulation, which is essential for keratinocyte regulation. These findings unveil a novel role of TASL in the proliferation and differentiation of keratinocytes, providing new insights into the intricate regulatory mechanisms of keratinocyte biology.

Advancements in alveolar bone grafting and ridge preservation: a narrative review on materials, techniques, and clinical outcomes.

This narrative review systematically explores the progression of materials and techniques in alveolar ridge preservation (ARP). We commence by delineating the evolution from traditional ARP methods to cutting-edge alternatives, including platelet-rich fibrin, injectable bone repair materials, and hydrogel systems. Critical examination of various studies reveals these innovative approaches not only accelerate bone healing but also significantly improve patient-reported outcomes, such as satisfaction, pain perception, and overall quality of life. Emphasis is placed on the correlation between advanced ARP techniques and enhanced patient comfort and clinical efficacy, underscoring their transformative potential in dental implantology. Highlighting the effectiveness of ARP, the implant survival rate over a span of 5 to 7 years was high, showcasing the reliability and success of these methods. Further, patients expressed high aesthetic satisfaction with the soft tissue outcome, evidenced by an average visual analog scale (VAS) score of 94. This positive aesthetic appraisal is linked to the clinical health of implants, potentially due to the employment of tooth-supported surgical guides. The economic analysis reveals a varied cost range for bone graft substitutes ($46.2 to $140) and socket sealing materials ($12 to $189), with a noteworthy correlation between the investment in barrier membranes and the diminished horizontal and vertical ridge resorption. This suggests that membrane usage significantly contributes to preserving ridge dimensions, offering a cost-effective strategy for enhancing ARP outcomes. In conclusion, this review illuminates the significant advancements in ARP, highlighting the shift towards innovative materials and techniques that not only promise enhanced bone regeneration and reduced healing times but also improve patient satisfaction and aesthetic outcomes. The documented high implant survival rate and the beneficial economic implications of membrane use further validate the effectiveness of contemporary ARP strategies, paving the way for their broader adoption in dental implantology.

Therapeutic Potential of 4-Hexylresorcinol in Preserving Testicular Function in Streptozotocin-Induced Diabetic Rats.

It is known that many diabetic patients experience testicular atrophy. This study sought to investigate the effect of 4-hexylresorcinol (4HR) on testicular function in rats with streptozotocin (STZ)-induced diabetes, focusing on testicular weight, sperm motility, histological alterations, and serum testosterone levels to understand the efficacy of 4HR on testes. Our findings reveal that 4HR treatment significantly improves testicular health in diabetic rats. Notably, the STZ group exhibited a testicular weight of 1.22 ± 0.48 g, whereas the STZ/4HR group showed a significantly enhanced weight of 1.91 ± 0.26 g (p < 0.001), aligning closely with the control group's weight of 1.99 ± 0.17 g and the 4HR group's weight of 2.05 ± 0.24 g, indicating no significant difference between control and 4HR groups (p > 0.05). Furthermore, the STZ/4HR group demonstrated significantly improved sperm motility compared to the STZ group, with apoptotic indicators notably reduced in the STZ/4HR group relative to the STZ group (p < 0.05). These results underscore the therapeutic potential of 4HR for maintaining testicular function under diabetic conditions.

HSPA9 reduction exacerbates symptoms and cell death in DSS-Induced inflammatory colitis.

Inflammatory bowel disease (IBD) is a chronic inflammatory condition that is influenced by various factors, including environmental factors, immune responses, and genetic elements. Among the factors that influence IBD progression, macrophages play a significant role in generating inflammatory mediators, and an increase in the number of activated macrophages contributes to cellular damage, thereby exacerbating the overall inflammatory conditions. HSPA9, a member of the heat shock protein 70 family, plays a crucial role in regulating mitochondrial processes and responding to oxidative stress. HSPA9 deficiency disrupts mitochondrial dynamics, increasing mitochondrial fission and the production of reactive oxygen species. Based on the known functions of HSPA9, we considered the possibility that HSPA9 reduction may contribute to the exacerbation of colitis and investigated its relevance. In a dextran sodium sulfate-induced colitis mouse model, the downregulated HSPA9 exacerbates colitis symptoms, including increased immune cell infiltration, elevated proinflammatory cytokines, decreased tight junctions, and altered macrophage polarization. Moreover, along with the increased mitochondrial fission, we found that the reduction in HSPA9 significantly affected the superoxide dismutase 1 levels and contributed to cellular death. These findings enhance our understanding of the intricate mechanisms underlying colitis and contribute to the development of novel therapeutic approaches for this challenging condition.

Redefining precision and efficiency in orthognathic surgery through virtual surgical planning and 3D printing: a narrative review.

Orthognathic surgery, essential for addressing jaw and facial skeletal irregularities, has historically relied on traditional surgical planning (TSP) involving a series of time-consuming steps including two-dimensional radiographs. The advent of virtual surgical planning (VSP) and 3D printing technologies has revolutionized this field, bringing unprecedented precision and customization to surgical processes. VSP facilitates 3D visualization of the surgical site, allowing for real-time adjustments and improving preoperative stress for patients by reducing planning time. 3D printing dovetails with VSP, offering the creation of anatomical models and surgical guides, enhancing the predictability of surgical outcomes despite higher initial setup and material costs. The integration of VSP and 3D printing promises innovative and effective solutions in orthognathic surgery, surpassing the limitations of traditional methods. Patient-reported outcomes show a positive post-surgery impact on the quality of life, underlining the significant role of these technologies in enhancing self-esteem and reducing anxiety. Economic analyses depict a promising long-term fiscal advantage with these modern technologies, notwithstanding the higher initial costs. The review emphasizes the need for large-scale randomized controlled trials to address existing research gaps and calls for a deeper exploration into the long-term impacts and ethical considerations of these technologies. In conclusion, while standing on the cusp of a technological renaissance in orthognathic surgery, it is incumbent upon the medical fraternity to foster a collaborative approach, balancing innovation with scrutiny to enhance patient care. The narrative review encourages the leveraging of VSP and 3D printing technologies for more efficient and patient-centric orthognathic surgery, urging the community to navigate uncharted territories in pursuit of precision and efficiency in the surgical landscape.

Early Osteogenic-Induced Adipose-Derived Stem Cells and Canine Bone Regeneration Potential Analyzed Using Biodegradable Scaffolds.

The complex process of bone regeneration is influenced by factors such as inflammatory responses, tissue interactions, and progenitor cells. Currently, multiple traumas can interfere with fracture healing, causing the prolonging or failure of healing. In these cases, bone grafting is the most effective treatment. However, there are several drawbacks, such as morbidity at the donor site and availability of suitable materials. Advantages have been provided in this field by a variety of stem cell types. Adipose-derived stem cells (ASCs) show promise. In the radiological examination of this study, it was confirmed that the C/S group showed faster regeneration than the other groups, and Micro-CT also showed that the degree of bone formation in the defect area was highest in the C/S group. Compared to the control group, the change in cortical bone area in the defect area decreased in the sham group (0.874), while it slightly increased in the C/S group (1.027). An increase in relative vascularity indicates a decrease in overall bone density, but a weak depression filled with fibrous tissue was observed outside the compact bone. It was confirmed that newly formed cortical bone showed a slight difference in bone density compared to surrounding normal bone tissue due to increased distribution of cortical bone. In this study, we investigated the effect of bone regeneration by ADMSCs measured by radiation and pathological effects. These data can ultimately be applied to humans with important clinical applications in various bone diseases, regenerative, and early stages of formative differentiation.

Effects of 4-hexylresorcinol on facial skeletal development in growing rats: Considerations for diabetes.

Objective: : To investigate the long-term effects of 4-hexylresorcinol (4HR) on facial skeletal growth in growing male rats, with a focus on diabetic animal models. Methods: : Forty male rats were used. Of them, type 1 diabetes mellitus was induced in 20 animals by administering 40 mg/kg streptozotocin (STZ), and they were assigned to either the STZ or 4HR-injected group (STZ/4HR group). The remaining 20 healthy rats were divided into control and 4HR groups. We administered 4HR subcutaneously at a weekly dose of 10 mg/kg until the rats were euthanized. At 16 weeks of age, whole blood was collected, and micro-computed tomography of the skull and femur was performed. Results: : All craniofacial linear measurements were smaller in the STZ group than in the control group. The mandibular molar width was significantly smaller in the 4HR group than in the control group (P = 0.031) but larger in the STZ/4HR group than in the STZ group (P = 0.011). Among the diabetic animals, the STZ/4HR group exhibited significantly greater cortical bone thickness, bone mineral density, and bone volume than the STZ group. Serum testosterone levels were also significantly higher in the STZ/4HR group than in the STZ group. Conclusions: : 4HR administration may have divergent effects on mandibular growth and bone mass in healthy and diabetic rats. In the context of diabetes, 4HR appears to have beneficial effects, potentially through the modulation of mitochondrial respiration.

Unleashing the power of boron: enhancing nitrogen reduction reaction through defective ReS2 monolayers.

Density functional theory (DFT) calculations were utilized to investigate the electrocatalytic potential of single boron (B) atom doping in defective ReS2 monolayers as an active site. Our investigation revealed that B-doped defective ReS2, containing S and S-Re-S defects, demonstrated remarkable conductivity, and emerged as an exceptionally active catalyst for nitrogen reduction reactions (NRR), exhibiting limiting potentials of 0.63 and 0.53 V, respectively. For both cases, we determined the potential by examining the hydrogenation of adsorbed N2* to N2H*. Although the competing hydrogen evolution reaction (HER) process appeared dominant in the S-Re-S defect case, its impact was minimal. The outstanding NRR performance can be ascribed to the robust chemical interactions between B and N atoms. The adsorption of N2 on B weakens the N-N bond, thereby facilitating the formation of NH3. Moreover, we verified the selectivity and stability of the catalysts for NRR. Our findings indicate that B-doped defective ReS2 monolayers hold considerable promise for electrocatalysis in a variety of applications.

Relevant Properties and Potential Applications of Sericin in Bone Regeneration.

The potential of sericin, a protein derived from silkworms, is explored in bone graft applications. Sericin's biocompatibility, hydrophilic nature, and cost-effectiveness make it a promising candidate for enhancing traditional graft materials. Its antioxidant, anti-inflammatory, and UV-resistant properties contribute to a healthier bone-healing environment, and its incorporation into 3D-printed grafts could lead to personalized medical solutions. However, despite these promising attributes, there are still gaps in our understanding. The precise mechanism through which sericin influences bone cell growth and healing is not fully understood, and more comprehensive clinical trials are needed to confirm its long-term biocompatibility in humans. Furthermore, the best methods for incorporating sericin into existing graft materials are still under investigation, and potential allergic reactions or immune responses to sericin need further study.

Self-Oxidation Resistance of the Curved Surface of Achromatic Copper.

Copper surfaces that exhibit a wide range of achromatic colors while still metallic have not been studied, despite advancements in antireflection coatings. A series of achromatic copper films grown with [111] preferred orientation by depositing 3D porous nanostructures is introduced via coherent/incoherent atomic sputtering epitaxy. The porous copper nanostructures self-regulate the giant oxidation resistance by constructing a curved surface that generates a series of monoatomic steps, followed by shrinkage of the lattice spacing of one or two surface layers. First-principles calculations confirm that these structural components cooperatively increase the energy barrier against oxygen penetration. The achromaticity of the single-crystalline porous copper films is systematically tuned by geometrical parameters such as pore size distribution and 3D linkage. The optimized achromatic copper films with high oxidation resistance show an unusual switching effect between superhydrophilicity and superhydrophobicity. The tailored 3D porous nanostructures can be a candidate material for numerous applications, such as antireflection coatings, microfluidic devices, droplet tweezers, and reversible wettability switches.

Intraoral approach for the treatment of non­infiltrating angiolipoma of the floor of the mouth in an elderly patient: A case report with review of the literature.

A 75-year-old male patient visited Gangneung-Wonju National University Dental Hospital (Gangneung, South Korea) with a 35-mm fluctuant lesion on the floor of the mouth. It was a dome-shaped exophytic lesion with its top on Wharton's duct orifice area. The encapsulated lesion was excised cautiously and the final diagnosis was non-infiltrating angiolipoma. To the best of our knowledge, this is the first report of an intraoral approach for the treatment of a non-infiltrating angiolipoma on the floor of the mouth in an elderly patient. Differentiating it from a ranula is essential for the surgical approach and, as there is a higher transition to infiltrating angiolipoma, definite treatment should be considered in elderly patients.

Highly Efficient Van Der Waals Heterojunction on Graphdiyne toward the High-Performance Photodetector.

Graphdiyne (GDY), a new 2D material, has recently proven excellent performance in photodetector applications due to its direct bandgap and high mobility. Different from the zero-gap of graphene, these preeminent properties made GDY emerge as a rising star for solving the bottleneck of graphene-based inefficient heterojunction. Herein, a highly effective graphdiyne/molybdenum (GDY/MoS2 ) type-II heterojunction in a charge separation is reported toward a high-performance photodetector. Characterized by robust electron repulsion of alkyne-rich skeleton, the GDY based junction facilitates the effective electron-hole pairs separation and transfer. This results in significant suppression of Auger recombination up to six times at the GDY/MoS2 interface compared with the pristine materials owing to an ultrafast hot hole transfer from MoS2 to GDY. GDY/MoS2 device demonstrates notable photovoltaic behavior with a short-circuit current of -1.3 × 10-5 A and a large open-circuit voltage of 0.23 V under visible irradiation. As a positive-charge-attracting magnet, under illumination, alkyne-rich framework induces positive photogating effect on the neighboring MoS2 , further enhancing photocurrent. Consequently, the device exhibits broadband detection (453-1064 nm) with a maximum responsivity of 78.5 A W-1 and a high speed of 50 µs. Results open up a new promising strategy using GDY toward effective junction for future optoelectronic applications.

Self-recovering passive cooling utilizing endothermic reaction of NH4NO3/H2O driven by water sorption for photovoltaic cell.

Power efficiency of photovoltaic cell is significantly affected by the cell temperature. Here, a self-recovering passive cooling unit is developed. The water-saturated zeolite 13X is coated on the back side of photovoltaic cell, and ammonium nitrate is dispersed as a layer to form a thin film. When heat is supplied, water is desorbed from zeolite 13X (latent cooling), and dissolves ammonium nitrate to induce endothermic reaction cooling. It is a reversible process that recovers itself at night. The unit works on the basis that the water sorption performance of porous materials is inversely proportional to temperature, and the solubility of endothermic reaction pairs increases proportionally with temperature. The average temperature of photovoltaic cell can be reduced by 15.1 °C, and the cooling energy density reaches 2,876 kJ/kg with average cooling power of 403 W/m2. We show that highly efficient passive cooling comprising inexpensive materials for photovoltaic cell could be achieved.

Coherent consolidation of trillions of nucleations for mono-atom step-level flat surfaces.

Constructing a mono-atom step-level ultra-flat material surface is challenging, especially for thin films, because it is prohibitively difficult for trillions of clusters to coherently merge. Even though a rough metal surface, as well as the scattering of carriers at grain boundaries, limits electron transport and obscures their intrinsic properties, the importance of the flat surface has not been emphasised sufficiently. In this study, we describe in detail the initial growth of copper thin films required for mono-atom step-level flat surfaces (MSFSs). Deposition using atomic sputtering epitaxy leads to the coherent merging of trillions of islands into a coplanar layer, eventually forming an MSFS, for which the key factor is suggested to be the individual deposition of single atoms. Theoretical calculations support that single sputtered atoms ensure the formation of highly aligned nanodroplets and help them to merge into a coplanar layer. The realisation of the ultra-flat surfaces is expected to greatly assist efforts to improve quantum behaviour by increasing the coherency of electrons.

The optimal scaffold for silk sericin-based bone graft: collagen versus gelatin.

BACKGROUND: Silk sericin is an active ingredient in bone grafts. However, the optimal scaffold for silk sericin has yet to be identified. METHOD: A critical-sized bone defect model in rat calvaria was used to evaluate bone regeneration. Silk sericin from Yeonnokjam, Bombyx mori, was incorporated into gelatin (group G, n = 6) and collagen (group C, n = 6). Bone regeneration was evaluated using micro-computed tomography (mCT) and histology. RESULTS: Group C showed a larger bone volume than group G in the mCT analysis (P = 0.001). Histological analysis showed a larger area of bony defects in group G than in group C. The bone regeneration area in group C was significantly larger than that in group G (P = 0.003). CONCLUSION: Compared with gelatin, collagen shows better bone regeneration in silk sericin-based bone grafts.

Nonpharmacological Complementary Interventions for the Management of Pain after Third Molar Surgery: An Umbrella Review of Current Meta-Analyses.

Objectives: To provide a nonbiased, complete assessment of what the evidence from meta-analyses informs us about complementary and nonpharmacological treatment options for the management of pain after third molar surgery, as well as highlight any discordancy, gaps, or lack of evidence among meta-analyses. Methods: The quality of the included systematic reviews was assessed using the ROBIS tool. Corrected covered area (CCA) was calculated for pairs of similar meta-analyses to identify the amount of overlap. Reviews that were the most recent, comprehensive, and had adequate quality were considered for analyses when reviews showed a high overlap. In cases with a low amount of overlap among meta-analyses, all eligible studies were included. Also, citation matrices were constructed to address overlap. A network meta-analytical approach was adopted to rank different interventions. Results: Ten meta-analyses were included for quantitative synthesis. The quantitative analysis revealed that platelet-rich fibrin and its derivatives as well as ozone therapy reduce early and late pain better than the other complementary interventions compared to control (no complementary intervention). Conclusions: Despite the shortcomings of included meta-analyses, consolidated evidence suggests that platelet-rich-fibrin and its derivatives as well as ozone therapy outperform the other nonpharmacological complementary interventions in reducing early and late postsurgical pain following third molar extraction. However, the results should be interpreted with caution due to an unclear risk of bias and lack of firm evidence in the included meta-analyses. Moreover, there is a need for a standard protocol for the application of nonpharmacological complementary interventions.

Quantum electron liquid and its possible phase transition.

Purely quantum electron systems exhibit intriguing correlated electronic phases by virtue of quantum fluctuations in addition to electron-electron interactions. To realize such quantum electron systems, a key ingredient is dense electrons decoupled from other degrees of freedom. Here, we report the discovery of a pure quantum electron liquid that spreads up to ~3 Å in a vacuum on the surface of an electride crystal. Its extremely high electron density and weak hybridization with buried atomic orbitals show the quantum and pure nature of the electrons, which exhibit a polarized liquid phase, as demonstrated by our spin-dependent measurement. Furthermore, upon enhancing the electron correlation strength, the dynamics of the quantum electrons change to that of a non-Fermi liquid along with an anomalous band deformation, suggestive of a transition to a hexatic liquid crystal phase. Our findings develop the frontier of quantum electron systems and serve as a platform for exploring correlated electronic phases in a pure fashion.