RESUMO
This study presents the synthesis and detailed structural analysis of the ternary nitride Ti10Cu3N4. Initially identified as Ti3CuN within the Ti-Cu-N ternary phase diagram, its crystal structure remained unresolved and was characterized solely as belonging to the tetragonal crystal system. Through a comprehensive structural analysis, this study proposes a revised stoichiometry as Ti10Cu3N4; its crystal structure represents a previously unreported structure type within the P4 2 /mnm space group. Its atomic arrangement was elucidated through a combination of X-ray powder diffraction profile analysis and density functional theory calculations, corroborated by neutron diffraction studies. Furthermore, the hydrogen storage properties of Ti10Cu3N4 were characterized, demonstrating a hydrogen absorption capacity of approximately 0.6 wt % with desorption occurring in the temperature range of 200-550 °C.
RESUMO
This study was carried out to assess the quality properties, components associated with taste and aroma of beef as a function of breed. For this purpose, steers from four Korean native cattle breeds: Hanwoo (n=10), Chikso (n=10), black Hanwoo (n=12, BHW) and Jeju black cattle (n=12, JBC) were used. The steers all were raised under identical conditions and finished at a similar age of around 30-months old. Following 24 h of slaughter, all longissimus lumborum muscles were collected and used for analysis of meat quality, fatty acids, and flavor-related components (metabolic compounds, free amino acids, and aroma volatiles). The Hanwoo presented a significantly higher intramuscular fat content (IMF, 22.85%) than the BHW (11.78%), Chikso (9.25%), and JBC (9.14%; p<0.05). The meat of Hanwoo breed showed lighter and redder color, and lower shear force value (p<0.05). The JBC presented a "healthier" fatty acid profiles as it had a higher total unsaturated fatty acids content (p<0.05). With regard to flavor-related components, Hanwoo also had higher total contents of free amino acids and metabolites associated with umami and sweet tastes, and fat-derived volatile compounds (aldehydes, alcohols, and ketones) associated with fatty aroma. It may be concluded that there was a considerable difference in the meat quality properties among breeds. The variations of IMF content and flavor-related components may be the main factors contributing to the typical flavors of beef among the four Korean native cattle breeds.
RESUMO
Hyperinflammation occurs in sepsis, especially in the early phase, and it could have both positive and negative effects on sepsis. Previously, we showed that a new concept of NF-κB inhibitor, exosome-based super-repressor IκBα (Exo-srIκB) delivery, has a beneficial effect on sepsis. Here, we further investigate the therapeutic effects of Exo-srIκB at different severities and phases of sepsis using an animal polymicrobial intra-abdominal infection model. We used a rat model of fecal slurry polymicrobial sepsis. First, we determined the survival effects of Exo-srIκB on sepsis according to the severity. We used two different severities of the animal sepsis model. The severe model had a mortality rate of over 50%. The mild/moderate model had a less than 30% mortality rate. Second, we administered the Exo-srIκB at various time points (1 h, 6 h, and 24 h after fecal slurry administration) to determine the therapeutic effect of Exo-srIκB at different phases of sepsis. Lastly, we determined the effects of the Exo-srIκB on cytokine production, arterial blood gas, electrolyte, and lactate. The survival gain was statistically significant in the severe sepsis model when Exo-srIκB was administered 6 h after sepsis. Interleukin 6 and interleukin-10 were significantly decreased in the kidney when administered with Exo-srIκB. The laboratory data showed that lactate, glucose, and potassium levels were significantly lowered in the NF-κB inhibitor group. In conclusion, Exo-srIκB exhibited a beneficial therapeutic effect when administered 6 h post fecal slurry administration in a severe sepsis model.
RESUMO
Robust ferroelectricity in HfO2-based ultrathin films has the potential to revolutionize nonvolatile memory applications in nanoscale electronic devices because of their compatibility with the existing Si technology. However, to fully exploit the potential of ferroelectric HfO2-based thin films, it is crucial to develop strategies for the controlled stabilization of various HfO2-based polymorphs in nanoscale heterostructures. This study demonstrates how substrate-orientation-induced anisotropic strain can engineer the crystal symmetry, structural domain morphology, and growth orientation of ultrathin Hf0.5Zr0.5O2 (HZO) films. Epitaxial ultrathin HZO films were grown on the heterostructures of (001)- and (110)-oriented La2/3Sr1/3MnO3/SrTiO3 (LSMO/STO) substrate. Various structural analyses revealed that the (110)-oriented substrate promotes a higher degree of structural order (crystallinity) with improved stability of the (111)-oriented orthorhombic phase (Pca21) of HZO. Conversely, the (001)-oriented substrate not only induces a distorted orthorhombic structure but also facilitates the partial stabilization of nonpolar phases. Electrical measurements revealed robust ferroelectric properties in epitaxial thin films without any wake-up effect, where the well-ordered crystal symmetry stabilized by STO(110) facilitated better ferroelectric characteristics. This study suggests that tuning the epitaxial growth of ferroelectric HZO through substrate orientation can improve the stability of the metastable ferroelectric orthorhombic phase and thereby offer a better understanding of device applications.
RESUMO
OBJECTIVE: Beef of Jeju black cattle (JBC) is considered as a healthy meat type due to its significantly higher unsaturated fatty acids (UFA). Lipid (e.g., UFA) is highly susceptible to oxidizing agents, which results in the quality deterioration and economic value loss of meat products. Therefore, development and application of novel preservative techniques is necessary to improve the shelf-life stability of high-UFA beef. The objective of this study was to assess the applicability of chitosan-based coatings in preservation of JBC beef. METHODS: Different coating solutions: 2% chitosan alone, and 2% chitosan containing 0.1% or 0.3% gallic acid were prepared to investigate their applicability in preservation of fresh beef during storage. Jeju black cattle beef (2-cm thick steaks) were non-coated (control) or coated with the above coating solutions, placed on trays, over-wrapped with plastic film and stored at 4°C. The microbiological indices, color, total volatile basic nitrogen (TVBN) and lipid oxidation of the beef were investigated after 1, 10, and 21 days of storage. RESULTS: Coating with 2% chitosan alone reduced the spoilage bacteria count, TVBN and thiobarbituric acid reactive substances levels in the beef compared with control during storage (p<0.05). Noticeably, coating with 2% chitosan containing 0.1% or 0.3% gallic acid was more effective on retardation of spoilage bacteria growth, lipid oxidation and discoloration in the beef compared to the chitosan coating alone over the storage period (21 days) (p<0.05). CONCLUSION: Taken together, the combined chitosan and gallic acid coating could be used as a bio-preservative technique in the meat industry.
RESUMO
Unraveling local dynamic charge processes is vital for progress in diverse fields, from microelectronics to energy storage. This relies on the ability to map charge carrier motion across multiple length- and timescales and understanding how these processes interact with the inherent material heterogeneities. Towards addressing this challenge, we introduce high-speed sparse scanning Kelvin probe force microscopy, which combines sparse scanning and image reconstruction. This approach is shown to enable sub-second imaging (>3 frames per second) of nanoscale charge dynamics, representing several orders of magnitude improvement over traditional Kelvin probe force microscopy imaging rates. Bridging this improved spatiotemporal resolution with macroscale device measurements, we successfully visualize electrochemically mediated diffusion of mobile surface ions on a LaAlO3/SrTiO3 planar device. Such processes are known to impact band-alignment and charge-transfer dynamics at these heterointerfaces. Furthermore, we monitor the diffusion of oxygen vacancies at the single grain level in polycrystalline TiO2. Through temperature-dependent measurements, we identify a charge diffusion activation energy of 0.18 eV, in good agreement with previously reported values and confirmed by DFT calculations. Together, these findings highlight the effectiveness and versatility of our method in understanding ionic charge carrier motion in microelectronics or nanoscale material systems.
RESUMO
Previously, we demonstrated that mitochondrial transplantation has beneficial effects in a polymicrobial sepsis model. However, the mechanism has not been fully investigated. Mitochondria have their own genes, and genomic changes in sepsis are an important issue in terms of pathophysiology, biomarkers, and therapeutic targets. To investigate the changes in transcriptomic features after mitochondrial transplantation in a polymicrobial sepsis model, we used a rat model of fecal slurry polymicrobial sepsis. Total RNA from splenocytes of sham-operated (SHAM, n = 10), sepsis-induced (SEPSIS, n = 7), and sepsis receiving mitochondrial transplantation (SEPSIS + MT, n = 8) samples was extracted and we conducted a comparative transcriptome-wide analysis between three groups. We also confirmed these results with qPCR. In terms of percentage of mitochondrial mapped reads, the SEPSIS + MT group had a significantly higher mapping ratio than the others. RT1-M2 and Cbln2 were identified as highly expressed in SEPSIS + MT compared with SEPSIS. Using SHAM expression levels as another control variable, we further identified six genes (Fxyd4, Apex2l1, Kctd4, 7SK, SNORD94, and SNORA53) that were highly expressed after sepsis induction and observed that their expression levels were attenuated by mitochondrial transplantation. Changes in transcriptomic features were identified after mitochondrial transplantation in sepsis. This might provide a hint for exploring the mechanism of mitochondrial transplantation in sepsis.
Assuntos
Sepse , Transcriptoma , Ratos , Animais , Mitocôndrias/genética , Mitocôndrias/metabolismo , Perfilação da Expressão Gênica , Sepse/genética , Sepse/metabolismoRESUMO
The browning of white adipocytes may be an innovative approach to address obesity. This study investigated the effects of rabbit meat extract on 3T3-L1 adipocytes, with a specific emphasis on inducing browning. The browning effects of rabbit meat extract were evaluated by analyzing genes specifically expressed in 3T3-L1 adipocytes using quantitative PCR and immunoblotting. Rabbit meat extract increased the expression of brown adipocyte-specific markers, UCP1 and PGC1α, and mitochondrial biogenesis factors, TFAM and NRF1, without affecting cell viability in fully differentiated 3T3-L1 adipocytes. Moreover, adipocyte differentiation and the triglyceride content were decreased; hormone-sensitive lipase activity was promoted. Rabbit meat extract activated the AMPK pathway in the differentiated 3T3-L1 cells. However, in adipocytes treated with rabbit meat extract, the expression of genes related to browning was reduced by the AMP-activated protein kinase (AMPK) inhibitor, dorsomorphin dihydrochloride. To the best of our knowledge, this is the first study to demonstrate that rabbit meat extract induces the browning of white adipocytes via the activation of the AMPK pathway, thereby demonstrating its therapeutic potential in preventing obesity.
RESUMO
Previously, we have shown that mitochondrial transplantation in the sepsis model has immune modulatory effects. The mitochondrial function could have different characteristics dependent on cell types. Here, we investigated whether the effects of mitochondrial transplantation on the sepsis model could be different depending on the cell type, from which mitochondria were isolated. We isolated mitochondria from L6 muscle cells, clone 9 liver cells and mesenchymal stem cells (MSC). We tested the effects of mitochondrial transplantation using in vitro and in vivo sepsis models. We used the LPS stimulation of THP-1 cell, a monocyte cell line, as an in vitro model. First, we observed changes in mitochondrial function in the mitochondria-transplanted cells. Second, we compared the anti-inflammatory effects of mitochondrial transplantation. Third, we investigated the immune-enhancing effects using the endotoxin tolerance model. In the in vivo polymicrobial fecal slurry sepsis model, we examined the survival and biochemical effects of each type of mitochondrial transplantation. In the in vitro LPS model, mitochondrial transplantation with each cell type improved mitochondrial function, as measured by oxygen consumption. Among the three cell types, L6-mitochondrial transplantation significantly enhanced mitochondrial function. Mitochondrial transplantation with each cell type reduced hyper-inflammation in the acute phase of in vitro LPS model. It also enhanced immune function during the late immune suppression phase, as shown by endotoxin tolerance. These functions were not significantly different between the three cell types of origin for mitochondrial transplantation. However, only L6-mitochondrial transplantation significantly improved survival compared to the control in the polymicrobial intraabdominal sepsis model. The effects of mitochondria transplantation on both in vitro and in vivo sepsis models differed depending on the cell types of origin for mitochondria. L6-mitochondrial transplantation might be more beneficial in the sepsis model.
Assuntos
Lipopolissacarídeos , Sepse , Humanos , Lipopolissacarídeos/metabolismo , Mitocôndrias/metabolismo , Sepse/metabolismo , Inflamação/metabolismo , Monócitos/metabolismoRESUMO
Immune suppression is known to occur during sepsis. Endotoxin tolerance is considered a mechanism of immune suppression in sepsis. However, the timing and serial changes in endotoxin tolerance have not been fully investigated. In this study, we investigated serial changes in endotoxin tolerance in a polymicrobial sepsis model. Herein, we used a rat model of fecal slurry polymicrobial sepsis. After induction of sepsis, endotoxin tolerance of peripheral blood mononuclear cells (PBMCs) and splenocytes was measured at various time points (6 h, 12 h, 24 h, 48 h, 72 h, 5 days, and 7 days), through the measurement of TNF-α production after stimulation with lipopolysaccharide (LPS) in an ex vivo model. At each time point, we checked for plasma tumor necrosis factor (TNF)-α, interleukin (IL)-6, and IL-10 levels. Moreover, we analyzed reactive oxygen species (ROS) as measured by 2',7'-dichlorodihydrofluorescein, plasma lactate, serum alanine aminotransferase (ALT), and creatinine levels. Nuclear factor (NF)-κB, IL-1 receptor-associated kinase (IRAK)-M, and cleaved caspase 3 levels were measured in the spleen. Endotoxin tolerance, measured by TNF-α production stimulated through LPS in PBMCs and splenocytes, was induced early in the sepsis model, starting from 6 h after sepsis. It reached a nadir at 24 to 48 h after sepsis, and then started to recover. Endotoxin tolerance was more prominent in the severe sepsis model. Plasma cytokines peaked at time points ranging from 6 to 12 h after sepsis. ROS levels peaked at 12 h and then decreased. Lactate, ALT, and serum creatinine levels increased up to 24 to 48 h, and then decreased. Phosphorylated p65 and IRAK-M levels of spleen increased up to 12 to 24 h and then decreased. Apoptosis was prominent 48 h after sepsis, and then recovered. In the rat model of polymicrobial sepsis, endotoxin tolerance occurred earlier and started to recover from 24 to 48 h after sepsis.
Assuntos
Lipopolissacarídeos , Sepse , Animais , Tolerância à Endotoxina , Interleucina-6 , Lactatos , Leucócitos Mononucleares , Lipopolissacarídeos/farmacologia , NF-kappa B , Ratos , Espécies Reativas de Oxigênio , Sepse/patologia , Fator de Necrose Tumoral alfaRESUMO
Polymorphism allows the symmetry of the lattice and spatial charge distributions of atomically thin materials to be designed. While various polymorphs for superconducting, magnetic, and topological states have been extensively studied, polymorphic control is a challenge for robust ferroelectricity in atomically thin geometries. Here, the atomic and electric manipulation of ferroelectric polymorphs in Mo1- x Wx Te2 is reported. Atomic manipulation for polymorphic control via chemical pressure (substituting tungsten for molybdenum atoms) and charge density modulation can realize tunable polar lattice structures and robust ferroelectricity up to T = 400 K with a constant coercive field in an atomically thin material. Owing to the effective inversion symmetry breaking, the ferroelectric switching withstands a charge carrier density of up to 1.1 × 1013 cm-2 , developing an original diagram for ferroelectric switching in atomically thin materials.
RESUMO
Continuous advancement in nonvolatile and morphotropic beyond-Moore electronic devices requires integration of ferroelectric and semiconductor materials. The emergence of hafnium oxide (HfO2)-based ferroelectrics that are compatible with atomic-layer deposition has opened interesting and promising avenues of research. However, the origins of ferroelectricity and pathways to controlling it in HfO2 are still mysterious. We demonstrate that local helium (He) implantation can activate ferroelectricity in these materials. The possible competing mechanisms, including He ion-induced molar volume changes, vacancy redistribution, vacancy generation, and activation of vacancy mobility, are analyzed. These findings both reveal the origins of ferroelectricity in this system and open pathways for nanoengineered binary ferroelectrics.
RESUMO
To address the demands of emerging data-centric computing applications, ferroelectric field-effect transistors (Fe-FETs) are considered the forefront of semiconductor electronics owing to their energy and area efficiency and merged logic-memory functionalities. Herein, the fabrication and application of an Fe-FET, which is integrated with a van der Waals ferroelectrics heterostructure (CuInP2 S6 /α-In2 Se3 ), is reported. Leveraging enhanced polarization originating from the dipole coupling of CIPS and α-In2 Se3 , the fabricated Fe-FET exhibits a large memory window of 14.5 V at VGS = ±10 V, reaching a memory window to sweep range of ≈72%. Piezoelectric force microscopy measurements confirm the enhanced polarization-induced wider hysteresis loop of the double-stacked ferroelectrics compared to single ferroelectric layers. The Landau-Khalatnikov theory is extended to analyze the ferroelectric characteristics of a ferroelectric heterostructure, providing detailed explanations of the hysteresis behaviors and enhanced memory window formation. The fabricated Fe-FET shows nonvolatile memory characteristics, with a high on/off current ratio of over 106 , long retention time (>104 s), and stable cyclic endurance (>104 cycles). Furthermore, the applicability of the ferroelectrics heterostructure is investigated for artificial synapses and for hardware neural networks through training and inference simulation. These results provide a promising pathway for exploring low-dimensional ferroelectronics.
RESUMO
Electrospun polymeric piezoelectric fibers have a considerable potential for shape-adaptive mechanical energy harvesting and self-powered sensing in biomedical, wearable, and industrial applications. However, their unsatisfactory piezoelectric performance remains an issue to be overcome. While strategies for increasing the crystallinity of electroactive ß phases have thus far been the major focus in realizing enhanced piezoelectric performance, tailoring the fiber morphology can also be a promising alternative. Herein, a design strategy that combines the nonsolvent-induced phase separation of a polymer/solvent/water ternary system and electrospinning for fabricating piezoelectric poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE) fibers with surface porosity under ambient humidity is presented. Notably, electrospun P(VDF-TrFE) fibers with higher surface porosity outperform their smooth-surfaced counterparts with a higher ß phase content in terms of output voltage and power generation. Theoretical and numerical studies also underpin the contribution of the structural porosity to the harvesting performance, which is attributable to local stress concentration and reduced dielectric constant due to the air in the pores. This porous fiber design can broaden the application prospects of shape-adaptive energy harvesting and self-powered sensing based on piezoelectric polymer fibers with enhanced voltage and power performance, as successfully demonstrated in this work by developing a communication system based on self-powered motion sensing.
Assuntos
Polímeros , UmidadeRESUMO
Steroids are currently being used in sepsis, particularly in septic shock. However, clinical trials to date have shown contradictory results. This could be attributed to the different patient endotypes and steroid doses, which have also contributed to the inconclusive results. We investigated the effects of glucocorticoid therapy on sepsis in a polymicrobial sepsis model in a variety of settings, such as steroid dose, severity, and sepsis phase. We used a rat model of fecal slurry polymicrobial sepsis. First, we investigated the optimum dose of steroids in a sepsis model. We administered different doses of dexamethasone after sepsis induction (0.1DEX; 0.1 mg/kg, 0.2DEX; 0.2 mg/kg, 5DEX; 5 mg/kg). Second, we used two different severities of the fecal slurry polymicrobial sepsis rat model to examine the effects of the steroids. A moderate or severe model was defined as a survival rate of approximately 70% and 30%, respectively. Third, we administered steroids in an early (1 h after sepsis induction) or late phase (25 h after sepsis). In all the experiments, we investigated the survival rates. In the determined optimal model and settings, we measured serum lactate, alanine transferase (ALT), creatinine, tumor necrosis factor-α (TNF-α), interleukin (IL)-6, IL-10, and arterial blood gas. We evaluated the bacterial burden in the blood and spleen. Endotoxin tolerance of peripheral blood mononuclear cells (PBMCs) and splenocytes was also investigated to determine the level of immune suppression 24 h after sepsis by measuring TNF-α production after stimulation with lipopolysaccharide (LPS) in an ex vivo model. Early treatment of 0.2 mg/kg dexamethasone in a severe sepsis model showed the best beneficial effects. In moderate- or late-phase sepsis, there was no survival gain with steroid treatment. DEX0.2 group showed less acute kidney injury manifested by serum creatinine and blood urea nitrogen. DEX decreased the levels of cytokines, including IL-6, IL-10, and TNF-α. Colony-forming units were significantly decreased in the blood when administered with dexamethasone. Endotoxin tolerance was not significantly different between the DEX0.2 and control groups. In conclusion, early treatment of 0.2 mg/kg dexamethasone improved the outcomes of rats in a severe sepsis model.
RESUMO
Owing to their switchable spontaneous polarization, ferroelectric materials have been applied in various fields, such as information technologies, actuators, and sensors. In the last decade, as the characteristic sizes of both devices and materials have decreased significantly below the nanoscale, the development of appropriate characterization tools became essential. Recently, a technique based on conductive atomic force microscopy (AFM), called AFM-positive-up-negative-down (PUND), is employed for the direct measurement of ferroelectric polarization under the AFM tip. However, the main limitation of AFM-PUND is the low frequency (i.e., on the order of a few hertz) that is used to initiate ferroelectric hysteresis. A significantly higher frequency is required to increase the signal-to-noise ratio and the measurement efficiency. In this study, a novel method based on high-frequency AFM-PUND using continuous waveform and simultaneous signal acquisition of the switching current is presented, in which polarization-voltage hysteresis loops are obtained on a high-polarization BiFeO3 nanocapacitor at frequencies up to 100 kHz. The proposed method is comprehensively evaluated by measuring nanoscale polarization values of the emerging ferroelectric Hf0.5 Zr0.5 O2 under the AFM tip.
RESUMO
Colour is one of the important quality traits affecting the meat purchasing decision by consumers, and myoglobin is the principal heme protein responsible for the meat colour. This study aimed to investigate the effects of pH (5.3, 5.8, 6.4 and 7.4) and temperature (4 and 25 °C) on oxymyoglobin (OxyMb) oxidation in model reaction mixtures containing OxyMb, fatty acids (C18:2n-6 and C18:3n-3) and vitamin E. A decrease of the OxyMb concentration with increased acidity was observed for all the reaction mixtures with/without fatty acids and vitamin E. After 48 h of storage at 4 °C, the OxyMb concentration decreased by approximately 60-70%, 61-69%, 53.7-53.9% and 40.93-41.84% in the reaction mixtures containing [OxyMb + C18:2n-6 or C18:3n-3] at pH 5.3, 5.8, 6.4 and 7.4, respectively. While, after 48 h at 25 °C, the OxyMb concentration decreased by 95-98% in all the reaction mixtures containing [OxyMb + C18:2n-6 or C18:3n-3] under all the pH conditions. The presence of vitamin E significantly inhibited the OxyMb oxidation in the reaction mixtures containing fatty acids under acidic conditions, but a higher level of vitamin E may be required for meat(s) containing high n-3 fatty acids content that are stored at high temperature.
RESUMO
The triboelectric effect is a ubiquitous phenomenon in which the surfaces of two materials are easily charged during the contact-separation process. Despite the widespread consequences and applications, the charging mechanisms are not sufficiently understood. Here, the authors report that, in the presence of a strain gradient, the charge transfer is a result of competition between flexoelectricity and triboelectricity, which could enhance charge transfer during triboelectric measurements when the charge transfers of both effects are in the same direction. When they are in the opposite directions, the direction and amount of charge transfer could be modulated by the competition between flexoelectric and triboelectric effects, which leads to a distinctive phenomenon, that is, the charge transfer is reversed with varying forces. The subsequent results on the electrical power output signals from the triboelectrification support the proposed mechanism. Therefore, the present study emphasizes the key role of the flexoelectric effect through experimental approaches, and suggests that both the amount and direction of charge transfer can be modulated by manipulating the mixed triboelectric and flexoelectric effects. This finding may provide important information on the triboelectric effect and can be further extended to serve as a guideline for material selection during a nanopatterned device design.
RESUMO
HfO2-based ferroelectrics are highly expected to lead the new paradigm of nanoelectronic devices owing to their unexpected ability to enhance ferroelectricity in the ultimate thickness scaling limit (≤2 nm). However, an understanding of its physical origin remains uncertain because its direct microstructural and chemical characterization in such a thickness regime is extremely challenging. Herein, we solve the mystery for the continuous retention of high ferroelectricity in an ultrathin hafnium zirconium oxide (HZO) film (â¼2 nm) by unveiling the evolution of microstructures and crystallographic orientations using a combination of state-of-the-art structural analysis techniques beyond analytical limits and theoretical approaches. We demonstrate that the enhancement of ferroelectricity in ultrathin HZO films originates from textured grains with a preferred orientation along an unusual out-of-plane direction of (112). In principle, (112)-oriented grains can exhibit 62% greater net polarization than the randomly oriented grains observed in thicker samples (>4 nm). Our first-principles calculations prove that the hydroxyl adsorption during the deposition process can significantly reduce the surface energy of (112)-oriented films, thereby stabilizing the high-index facet of (112). This work provides new insights into the ultimate scaling of HfO2-based ferroelectrics, which may facilitate the design of future extremely small-scale logic and memory devices.
RESUMO
OBJECTIVE: In most retail centers, primal pork cuts for sale are usually prepared into retail-ready slices and overwrapped with air-permeable plastic film. Also, meat of Korean native black pig (KNP) is reputed for its superior quality, however, its shelf life during retail display has not been studied. Thus, the objective of this study was to evaluate shelf life of prepackaged retail-ready KNP belly and shoulder butt slices during refrigerated display. METHODS: Bellies and shoulder butt obtained at 24 h post-mortem from finishing KNP were used. Each belly or shoulder butt was manually cut into 1.5 cm-thick slices. The slices in each cut type were randomly taken and placed on white foam tray (2 slices/tray) overwrapped with polyvinyl chloride film. The retail-ready packages were then placed in a retail display cabinet at 4°C. Shelf life and sensory quality of the samples were evaluated on day 1, 3, 6, 9, 12, and 15 of display. RESULTS: The shoulder butt reached the upper limit (20 mg/100 g) of volatile basic nitrogen for fresh meat after 9 days while, the belly remained within this limit throughout the display time (15 days). Both the cuts reached a thiobarbituric acid reactive substances level of above 0.5 mg malondialdehyde/kg after 9 days. The a* (redness) values remained unchanged during first 9 days in both cuts (p>0.05). After 9 days, off-flavor was not found in either cut, but higher off-flavor intensity was found in shoulder butt after 12 days. The shoulder butt was unacceptable for overall eating quality after 12 days while, belly still was acceptable after 12 days. CONCLUSION: The belly showed a longer shelf life compared to the shoulder butt, and a shelf life of 9 and 12 days is recommended for the prepackaged retail-ready KNP shoulder butt and belly slices, respectively.