RESUMO
Retraction of DOI: 10.1103/PhysRevLett.127.016401.
RESUMO
At elevated temperatures SnSe is reported to undergo a structural transition from the low symmetry orthorhombic GeS-type to a higher symmetry orthorhombic TlI-type. Although increasing symmetry should likewise increase lattice thermal conductivity, many experiments on single crystals and polycrystalline materials indicate that this is not the case. Here we present temperature dependent analysis of time-of-flight (TOF) neutron total scattering data in combination with theoretical modeling to probe the local to long-range evolution of the structure. We report that while SnSe is well characterized on average within the high symmetry space group above the transition, over length scales of a few unit cells SnSe remains better characterized in the low symmetry GeS-type space group. Our finding from robust modeling provides further insight into the curious case of a dynamic order-disorder phase transition in SnSe, a model consistent with the soft-phonon picture of the high thermoelectric power above the phase transition.
RESUMO
Cubic energy materials such as thermoelectrics or hybrid perovskite materials are often understood to be highly disordered1,2. In GeTe and related IV-VI compounds, this is thought to provide the low thermal conductivities needed for thermoelectric applications1. Since conventional crystallography cannot distinguish between static disorder and atomic motions, we develop the energy-resolved variable-shutter pair distribution function technique. This collects structural snapshots with varying exposure times, on timescales relevant for atomic motions. In disagreement with previous interpretations3-5, we find the time-averaged structure of GeTe to be crystalline at all temperatures, but with anisotropic anharmonic dynamics at higher temperatures that resemble static disorder at fast shutter speeds, with correlated ferroelectric fluctuations along the <100>c direction. We show that this anisotropy naturally emerges from a Ginzburg-Landau model that couples polarization fluctuations through long-range elastic interactions6. By accessing time-dependent atomic correlations in energy materials, we resolve the long-standing disagreement between local and average structure probes1,7-9 and show that spontaneous anisotropy is ubiquitous in cubic IV-VI materials.
RESUMO
Colloidal bismuth therapeutics have been used for hundreds of years, yet remain mysterious. Here we report an X-ray pair distribution function (PDF) study of the solvolysis of bismuth disalicylate, a model for the metallodrug bismuth subsalicylate (Pepto-Bismol). This reveals catalysis by traces of water, followed by multistep cluster growth. The ratio of the two major species, {Bi9O7} and {Bi38O44}, depends on exposure to air, time, and the solvent. The solution-phase cluster structures are of significantly higher symmetry in comparison to solid-state analogues, with reduced off-center Bi3+ displacements. This explains why such "magic-size" clusters can be both stable enough to crystallize and sufficiently labile for further growth.
Assuntos
Bismuto , Compostos Organometálicos , SalicilatosRESUMO
A reversible density driven insulator to metal to insulator transition in high-spin MnS_{2} is experimentally observed, leading with a colossal electrical resistance drop of 10^{8} Ω by 12 GPa. Density functional theory simulations reveal the metallization to be unexpectedly driven by previously unoccupied S_{2}^{2-} σ_{3p}^{*} antibonding states crossing the Fermi level. This is a unique variant of the charge transfer insulator to metal transition for negative charge transfer insulators having anions with an unsaturated valence. By 36 GPa the emergence of the low-spin insulating arsenopyrite (P2_{1}/c) is confirmed, and the bulk metallicity is broken with the system returning to an insulative electronic state.
RESUMO
The AMnO2 delafossites (A = Na, Cu) are model frustrated antiferromagnets, with triangular layers of Mn3+ spins. At low temperatures (TN = 65 K), a C2/m â P1Ì transition is found in CuMnO2, which breaks frustration and establishes magnetic order. In contrast to this clean transition, A = Na only shows short-range distortions at TN. Here, we report a systematic crystallographic, spectroscopic, and theoretical investigation of CuMnO2. We show that, even in stoichiometric samples, nonzero anisotropic Cu displacements coexist with magnetic order. Using X-ray/neutron diffraction and Raman scattering, we show that high pressures act to decouple these degrees of freedom. This manifests as an isostuctural phase transition at â¼10 GPa, with a reversible collapse of the c-axis. This is shown to be the high-pressure analogue of the c-axis negative thermal expansion seen at ambient pressure. Density functional theory (DFT) simulations confirm that dynamical instabilities of the Cu+ cations and edge-shared MnO6 layers are intertwined at ambient pressure. However, high pressure selectively activates the former, before an eventual predicted reemergence of magnetism at the highest pressures. Our results show that the lattice dynamics and local structure of CuMnO2 are quantitatively different from nonmagnetic Cu delafossites and raise questions about the role of intrinsic inhomogeneity in frustrated antiferromagnets.
RESUMO
The Ising triangular lattice remains the classic test-case for frustrated magnetism. Here we report neutron scattering measurements of short range magnetic order in CuMnO2, which consists of a distorted lattice of Mn3+ spins with single-ion anisotropy. Physical property measurements on CuMnO2 are consistent with 1D correlations caused by anisotropic orbital occupation. However the diffuse magnetic neutron scattering seen in powder measurements has previously been fitted by 2D Warren-type correlations. Using neutron spectroscopy, we show that paramagnetic fluctuations persist up to â¼25 meV above T N = 65 K. This is comparable to the incident energy of typical diffractometers, and results in a smearing of the energy integrated signal, which hence cannot be analysed in the quasi-static approximation. We use low energy XYZ polarised neutron scattering to extract the purely magnetic (quasi)-static signal. This is fitted by reverse Monte Carlo analysis, which reveals that two directions in the triangular layers are perfectly frustrated in the classical spin-liquid phase at 75 K. Strong antiferromagnetic correlations are only found along the b-axis, and our results hence unify the pictures seen by neutron scattering and macroscopic physical property measurements.
RESUMO
ID15A is a newly refurbished beamline at the ESRF devoted to operando and time-resolved diffraction and imaging, total scattering and diffraction computed tomography. The beamline is optimized for rapid alternation between the different techniques during a single operando experiment in order to collect complementary data on working systems. The high available energy (up to 120â keV) means that even bulky and highly absorbing systems may be studied. The beamline is equipped with optimized focusing optics and a photon-counting CdTe pixel detector, allowing for both unprecedented data quality at high energy and for very rapid triggered experiments. A large choice of imaging detectors and ancillary probes and sample environments is also available.
RESUMO
The nature of the Verwey transition occurring at TV ≈ 125 K in magnetite (Fe3O4) has been an outstanding problem over many decades. A complex low temperature electronic order was recently discovered and associated structural fluctuations persisting above TV are widely reported, but the origin of the underlying correlations and hence of the Verwey transition remains unclear. Here we show that local structural fluctuations in magnetite emerge below the Curie transition at TC ≈ 850 K, through X-ray pair distribution function analysis. Around 80% of the low temperature correlations emerge in proportion to magnetization below TC. This confirms that fluctuations in Fe-Fe bonding arising from magnetic order are the primary electronic instability and hence the origin of the Verwey transition. Such hidden instabilities may be important to other spin-polarised conductors and orbitally degenerate materials.
RESUMO
We study the spontaneous crystallization of an assembly of highly monodisperse steel spheres under shaking, as it evolves from localized icosahedral ordering towards a packing reaching crystalline ordering. Towards this end, real space neutron tomography measurements on the granular assembly are carried out, as it is systematically subjected to a variation of frequency and amplitude. As expected, we see a presence of localized icosahedral ordering in the disordered initial state (packing fraction ≈ 0.62). As the frequency is increased for both the shaking amplitudes (0.2 and 0.6 mm) studied here, there is a rise in packing fraction, accompanied by an evolution to crystallinity. The extent of crystallinity is found to depend on both the amplitude and frequency of shaking. We find that the icosahedral ordering remains localized and its extent does not grow significantly, while the crystalline ordering grows rapidly as an ordering transition point is approached. In the ordered state, crystalline clusters of both face centered cubic (FCC) and hexagonal close packed (HCP) types are identified, the latter of which grows from stacking faults. Our study shows that an earlier domination of FCC gives way to HCP ordering at higher shaking frequencies, suggesting that despite their coexistence, there is a subtle dynamical competition at play. This competition depends on both shaking amplitude and frequency, as our results as well as those of earlier theoretical simulations demonstrate. It is likely that this involves the very small free energy difference between the two structures.
RESUMO
The structures and properties of vanadium oxides are often related to the formation of molecule-like clusters of vanadium cations through direct V-V bonding. GaV2O4, a new vanadium spinel, was synthesized. Powder diffraction and X-ray total scattering studies, complemented by magnetization and resistivity measurements, reveal that the low-temperature phase of this material is structurally distorted and features ordered pairs of three- and four-atom vanadium clusters. These clusters persist into a disordered cubic phase above the charge-ordering transition at TCO = 415 K. Furthermore, quasi-elastic neutron scattering indicates that the disordered clusters remain well-defined and static to 1100 K.
RESUMO
Mechanochemical methods offer unprecedented academic and industrial opportunities for solvent-free synthesis of novel materials. The need to study mechanochemical mechanisms is growing, and has led to the development of real-time in situ X-ray powder diffraction techniques (RI-XRPD). However, despite the power of RI-XRPD methods, there remain immense challenges. In the present contribution, many of these challenges are highlighted, and their effect on the interpretation of RI-XRPD data considered. A novel data processing technique is introduced for RI-XRPD, through which the solvent-free mechanochemical synthesis of an organic salt is followed as a case study. These are compared to ex situ studies, where notable differences are observed. The process is monitored over a range of milling frequencies, and a nonlinear correlation between milling parameters and reaction rate is observed. Kinetic analysis of RI-XRPD allows, for the first time, observation of a mechanistic shift over the course of mechanical treatment, resulting from time evolving conditions within the mechanoreactor.
RESUMO
Mechanochemistry provides a rapid, efficient route to metal-organic framework Zn-MOF-74 directly from a metal oxide and without bulk solvent. In situ synchrotron X-ray diffraction monitoring of the reaction course reveals two new phases and an unusual stepwise process in which a close-packed intermediate reacts to form the open framework. The reaction can be performed on a gram scale to yield a highly porous material after activation.
RESUMO
We report the characterisation of natural samples of the cubic pyrite mineral MnS2 using very high resolution synchrotron x-ray diffraction techniques. At low temperatures we find a new low temperature polymorph, which results from coupling between magnetic and lattice degrees of freedom. Below the magnetic ordering temperature T(N) = 48 K, we detect a pseudo-tetragonal distortion with a tiny c/a ratio of 1.0006. The structure can be refined in the space group Pbca The symmetry lowering reduces magnetic frustration in the fcc Mn(2+) lattice and is likely responsible for the previously reported lock-in of the magnetic propagation vector. This behaviour is similar to the spin-Peierls phase transitions reported in other three-dimensional Heisenberg magnets like the chromate spinels.
RESUMO
Chemical and physical transformations by milling are attracting enormous interest for their ability to access new materials and clean reactivity, and are central to a number of core industries, from mineral processing to pharmaceutical manufacturing. While continuous mechanical stress during milling is thought to create an environment supporting nonconventional reactivity and exotic intermediates, such speculations have remained without proof. Here we use in situ, real-time powder X-ray diffraction monitoring to discover and capture a metastable, novel-topology intermediate of a mechanochemical transformation. Monitoring the mechanochemical synthesis of an archetypal metal-organic framework ZIF-8 by in situ powder X-ray diffraction reveals unexpected amorphization, and on further milling recrystallization into a non-porous material via a metastable intermediate based on a previously unreported topology, herein named katsenite (kat). The discovery of this phase and topology provides direct evidence that milling transformations can involve short-lived, structurally unusual phases not yet accessed by conventional chemistry.
RESUMO
Colloidal nanoparticles, used for applications from catalysis and energy applications to cosmetics, are typically embedded in matrixes or dispersed in solutions. The entire particle surface, which is where reactions are expected to occur, is thus exposed. Here, we show with x-ray pair distribution function analysis that polar and nonpolar solvents universally restructure around nanoparticles. Layers of enhanced order exist with a thickness influenced by the molecule size and up to 2 nanometers beyond the nanoparticle surface. These results show that the enhanced reactivity of solvated nanoparticles includes a contribution from a solvation shell of the size of the particle itself.
RESUMO
An experimental technique for in situ and real-time monitoring of mechanochemical reactions in a shaker ball mill was recently described, which utilises highly penetrating X-ray radiation available at the ID15B beamline of the European Synchrotron Radiation Facility. Herein, we describe the first attempts to perform such reaction monitoring in a quantitative fashion, by introducing an internal X-ray diffraction standard. The use of silicon as an internal standard resolved the issue with variations of the amount of the sample in the X-ray beam due to the non-uniform distribution of the sample in the reaction jar and allowed, via Rietveld analysis, the first quantitative estimate of the amorphous phase content in a mechanochemical reaction as it is being milled. We also highlight problems associated with the non-ideal mixing of the reaction mixture.
Assuntos
Imidazóis/química , Óxido de Zinco/química , Silício/química , Difração de Raios XRESUMO
The atomic structure of Ni-Pd nanoparticles has been studied using atomic pair distribution function (PDF) analysis of X-ray total scattering data and with transmission electron microscopy (TEM). Larger nanoparticles have PDFs corresponding to the bulk face-centered cubic packing. However, the smallest nanoparticles have PDFs that strongly resemble those obtained from bulk metallic glasses (BMGs). In fact, by simply scaling the distance axis by the mean metallic radius, the curves may be collapsed onto each other and onto the PDF from a metallic glass sample. In common with a wide range of BMG materials, the intermediate range order may be fit with a damped single-frequency sine wave. When viewed in high-resolution TEM, these nanoparticles exhibit atomic fringes typical of those seen in small metallic clusters with icosahedral or decahedral order. These two seemingly contradictory results are reconciled by calculating the PDFs of models of icosahedra that would be consistent with the fringes seen in TEM. These model PDFs resemble the measured ones when significant atom-position disorder is introduced, drawing together the two diverse fields of metallic nanoparticles and BMGs and supporting the view that BMGs may contain significant icosahedral or decahedral order.
RESUMO
Dramatic volume collapses under pressure are fundamental to geochemistry and of increasing importance to fields as diverse as hydrogen storage and high-temperature superconductivity. In transition metal materials, collapses are usually driven by so-called spin-state transitions, the interplay between the single-ion crystal field and the size of the magnetic moment. Here we show that the classical S = 5/2 mineral hauerite (MnS2) undergoes an unprecedented (ΔV ~ 22%) collapse driven by a conceptually different magnetic mechanism. Using synchrotron X-ray diffraction we show that cold compression induces the formation of a disordered intermediate. However, using an evolutionary algorithm we predict a new structure with edge-sharing chains. This is confirmed as the thermodynamic ground state using in situ laser heating. We show that magnetism is globally absent in the new phase, as low-spin quantum S = 1/2 moments are quenched by dimerization. Our results show how the emergence of metal-metal bonding can stabilize giant spin-lattice coupling in Earth's minerals.
RESUMO
An emerging theme of modern composites and devices is the coupling of nanostructural properties of materials with their targeted arrangement at the microscale. Of the imaging techniques developed that provide insight into such designer materials and devices, those based on diffraction are particularly useful. However, to date, these have been heavily restrictive, providing information only on materials that exhibit high crystallographic ordering. Here we describe a method that uses a combination of X-ray atomic pair distribution function analysis and computed tomography to overcome this limitation. It allows the structure of nanocrystalline and amorphous materials to be identified, quantified and mapped. We demonstrate the method with a phantom object and subsequently apply it to resolving, in situ, the physicochemical states of a heterogeneous catalyst system. The method may have potential impact across a range of disciplines from materials science, biomaterials, geology, environmental science, palaeontology and cultural heritage to health.