Comparative Evaluation of Corneal Storage Medias Used as Tooth Avulsion Medias in Maintaining the Viability of Periodontal Ligament Cells Using the Cell Counting Kit-8 Assay.

Purpose: The prime factor in determining the success of reimplantation of an avulsed tooth is the maintenance of the viability of periodontal ligament fibroblast cells (PDFC). This study aims to evaluate and compare Mc Carey Kaufman media (MK), Cornisol, Dulbecco's Modified Eagles Medium (DMEM), Hanks Balanced Salt Solution (HBSS) and distilled water in preserving the viability of the PDFC using the Cell Counting Kit-8 assay (CCK-8). Methods: Cryopreserved PDFC were suspended in DMEM and incubated in CO2 incubator at 370C with 95% humidity and 5% CO2 for attachment. Once cells attained 80% confluence, they were trypsinised and passed into T-25 culture flasks to expand the culture population. Cells from passage 5 were pooled for experimentation. Trypan blue exclusion test was performed before each experiment to measure cell viability and batches showing more than 95% viability were used in the experiment. The viable PDFC with 1×105 were seeded in 96 well plates and incubated in CO2 incubator at 370C, 95% humidity and 5% CO2 for 24 hours to allow cell attachment. A 100µL of the experimental media were added in the wells and the cells were exposed for 1, 24 and 48 hours respectively. The viability was determined using the CCK-8. Experiment was performed in triplicates and data was subjected to statistical analysis. Results: Statistical analysis was performed using repeated measure ANOVA, ANOVA, and post-hoc Bonferroni test with the significance level p<0.05. The values are as follows: MK (1.3146 ±0.0588, 1.9012±0.0511, 2.0723±0.1211) > Cornisol (1.2399±0.0548, 1.9596±0.0652, 1.9592±0.1361) >DMEM (1.1914±0.0691, 1.8479±0.0116, 2.0718±0.0795) > HBSS (0.3665±0.0814, 0.0184±0.0010, 0.0248±0.0042) >distilled water (0.0122±0.0033, 0.0225±0.0085, 0.0104±0.0008) at 1 hour, 24 hours and 48 hours respectively. MK >Cornisol>DMEM>HBSS>distilled water. Conclusion: It can be concluded that the corneal preservation solutions showed promising results in preserving periodontal ligament cell viability for extended time periods.

Survival of human periodontal ligament fibroblast cells in Cornisol and HBSS for transportation of avulsed teeth: a comparative ex vivo study.

OBJECTIVE: Viability of periodontal ligament fibroblast cells (PDFC) is one of the key factors in determining the success of replantation of avulsed teeth. Extra-oral time and transport media are closely related to the same. The present study aims to evaluate and compare the efficiency of Cornisol, Hank's balanced salt solution (HBSS) and normal saline in preserving the viability of PDFC. MATERIALS AND METHODS: The human PDFC were isolated from primary culture from freshly extracted human premolars. Effect of Cornisol, HBSS and normal saline on viability of isolated PDFC was assessed using standard MTT assay. The cells were exposed to the experimental solutions (Cornisol/HBSS/normal saline) for varying time points (30 min, 1 h, 24 h, 48 h and 96 h) and viability was determined by colorimetric MTT method by quantifying the amount of formazan crystal formed (optical density). Experiment was performed in triplicates and the data were subjected to statistical analysis. RESULTS: Statistical analysis was performed using the Kruskal-Wallis ANOVA with post hoc Bonferroni's test with a significance level of p value ≤.05. Cornisol ≥ HBSS > saline. CONCLUSION: Cornisol can be used as a storage media for avulsed teeth and is significantly more effective than HBSS in maintaining the periodontal ligament cell viability at tested time intervals.

Evaluation of Sealing Ability of Biodentine to Root-End Cavities Irrigated either with Maleic Acid or Irritrol Using Glucose Filtration Model

ABSTRACT Objective: To compare the effect of Maleic acid and Irritrol (combination of Chlorhexidine & Ethylenediaminetetraacetic acid) irrigation on the sealing ability of Biodentine when used as root-end filling material. Material and Methods: Thirty single-rooted human premolars were subjected to standardized root canal instrumentation and were irrigated with 2.5% Sodium Hypochlorite (NaOCl) after each instrument change. Apical root resections were done by removing 3 mm of the apex at a 90° angle to the long axis of the root with a diamond bur. The root end cavity preparation was done using ultrasonic tips at a low power setting under water coolant. They were randomly divided into 3 groups (n=10). Group 1 was irrigated with 7% Maleic acid, Group 2 was irrigated with Irritrol, and Group 3 was irrigated with 0.9% Saline (Control). Then, the root end cavities of all the samples were restored with Biodentine and were subjected to leakage analysis using a glucose filtration test. The mean values for each group were calculated and the obtained data was statistically analysed using ANOVA with post-hoc Tukey's test, ANOVA with post-hoc Games-Howell test and repeated measures ANOVA with post-hoc Bonferroni test. Results: The specimens irrigated with Irritrol showed least microleakage as compared to 7% Maleic acid and 0.9% Saline. Conclusion: A regimen involving irrigation of the root-end cavity with Irritrol followed by root-end filling with Biodentine can improve the apical seal.

Anomalies and Clinical Significance of Mylohyoid Nerve: A Review.

BACKGROUND: The mylohyoid nerve is a branch of the inferior alveolar nerve (IAN), which is a branch of the posterior division of the mandibular nerve (MN). It is the source of motor nerve supply to the mylohyoid and anterior belly of the digastric muscle. At times, it provides sensory innervation to the mandibular teeth and skin below the chin. Since the location, anatomical variation and communications of the mylohyoid nerve are varied, it becomes clinically important to have an in-depth knowledge when treating patients for dental and maxillofacial procedures. Such anatomical variations of the mylohyoid nerve innervations may account for failure of the nerve blocks and hence, knowledge is very important for the practitioner. MATERIALS AND METHODS: A thorough literature search was done using the key words mandibular nerve, communications of the mylohyoid nerve, inferior alveolar nerve, lingual nerve, failure of dental anaesthesia, mylohyoid nerve and dental implants "from the Databases - PubMed, Scopus Embase and Web of Science (years 1952-2020)". RESULTS: The mylohyoid nerve may contain motor and sensory fibres, it may pass through the mylohyoid groove or canal and communicate with other nerves, which is clinically significant. Such anatomical variations may be one of the reasons for the failure of the inferior alveolar nerve block. CONCLUSION: Awareness of these variations is very significant in planning treatment and avoiding any unnecessary steps. The most frequently encountered anatomic variation of the mylohyoid nerve was innervation of the submental skin and the anterior teeth.

Comparative Evaluation of Fluoride Release From Two Different Glass Ionomer Cement and a Novel Alkasite Restorative Material - An in Vitro Study

Abstract Objective: To compare the fluoride release from Conventional Glass Ionomer Cement (GIC), Resin Modified GIC (RMGIC), and Cention N Alkasite Material. Material and Methods: Forty- five disc-shaped specimens of three different restorative materials (Conventional GIC, RMGIC, and Alkasite material) were made and divided into 3 groups (n=15). Fluoride release was evaluated at the end of Day 1, 7, 14, and Day 28 using fluoride ion-selective electrode. Intergroup and Intra-group analysis was done using One-way ANOVA with a Post-hoc test. A p-value of <0.05 was considered statistically significant. Results: Cention showed more fluoride release (in parts per million) than GIC and RMGIC at increased time duration. However, at the end of day 1, there was lesser fluoride release with Cention, as compared with the other groups. Conclusion: The new Alkasite restorative material showed promising results in terms of fluoride release and is better than GIC and RMGIC at increased time duration.

Effect of Thermocycling on the Colour Stability of Aesthetic Restorative Materials: An in-vitro Spectrophotometric Analysis

Abstract Objective: To compare the color stability of Cention N, Fuji IX GP Extra, and Fuji IX GP after thermocycling. Material and Methods: Ten discs of each material of dimension 10 x 1 mm were prepared using a split mold. The preparations of the specimens were done according to the powder/liquid ratio as recommended by the manufacturers [4.6:1, 3.4:1 and 3.6:1 for the groups I, II, and III, respectively]. After setting, the samples were retrieved, and the thickness of each specimen was measured using a micrometer at five different locations. The specimens with variations in thickness, porosity or cracks were discarded and thus not included in the study. The selected specimens were stored in distilled water for 24 hours prior to testing. The prepared specimens were thermocycled at 5°C and 55°C, with a dwell time of 15 seconds for 250 or 500 cycles. Subsequently, the color parameters of the discs were measured using a spectrophotometer. The data were analyzed using two way ANOVA test, and a p-value <0.001 was considered. Results: Thermocycling resulted in changes in the color of both Glass Ionomer cement and Cention N (p<0.001). Among the materials tested, Cention N showed superior color stability. Conclusion: Cention N exhibited better color stability compared to Glass ionomer cements.

Restoration of an endodontically treated premolar with limited interocclusal clearance.

Endodontically treated teeth with the loss of coronal tooth structure when left untreated for a long period may cause supraeruption, drifting, tipping, and rotation of adjacent and opposing teeth. This may be challenging to the clinician, when fabricating a crown because of inadequate interocclusal space. This case report describes a simple technique to restore an endodontically treated maxillary first premolar with the loss of coronal tooth structure and lack of interocclusal space. The maxillary first premolar had a single root canal and was endodontically treated. The lower premolar had supraerupted reducing the interocclusal space. A minimally invasive and esthetic technique was used to restore the tooth with limited interocclusal clearance. The tooth was restored with a Richmond crown, which had the morphology of a canine instead of a premolar. Thus, the tooth was salvaged by changing the morphology of the crown and the desired functional and esthetic results were obtained.