Phonon-Assisted Auger-Meitner Recombination in Silicon from First Principles.

We present a consistent first-principles methodology to study both direct and phonon-assisted Auger-Meitner recombination (AMR) in indirect-gap semiconductors that we apply to investigate the microscopic origin of AMR processes in silicon. Our results are in excellent agreement with experimental measurements and show that phonon-assisted contributions dominate the recombination rate in both n-type and p-type silicon, demonstrating the critical role of phonons in enabling AMR. We also decompose the overall rates into contributions from specific phonons and electronic valleys to further elucidate the microscopic origins of AMR. Our results highlight potential pathways to modify the AMR rate in silicon via strain engineering.

Nanophotonic control of thermal emission under extreme temperatures in air.

Nanophotonic materials offer spectral and directional control over thermal emission, but in high-temperature oxidizing environments, their stability remains low. This limits their applications in technologies such as solid-state energy conversion and thermal barrier coatings. Here we show an epitaxial heterostructure of perovskite BaZr0.5Hf0.5O3 (BZHO) and rocksalt MgO that is stable up to 1,100 °C in air. The heterostructure exhibits coherent atomic registry and clearly separated refractive-index-mismatched layers after prolonged exposure to this extreme environment. The immiscibility of the two materials is corroborated by the high formation energy of substitutional defects from density functional theory calculations. The epitaxy of immiscible refractory oxides is, therefore, an effective method to avoid prevalent thermal instabilities in nanophotonic materials, such as grain-growth degradation, interlayer mixing and oxidation. As a functional example, a BZHO/MgO photonic crystal is implemented as a filter to suppress long-wavelength thermal emission from the leading bulk selective emitter and effectively raise its cutoff energy by 20%, which can produce a corresponding gain in the efficiency of mobile thermophotovoltaic systems. Beyond BZHO/MgO, computational screening shows that hundreds of potential cubic oxide pairs fit the design principles of immiscible refractory photonics. Extending the concept to other material systems could enable further breakthroughs in a wide range of photonic and energy conversion applications.

Scalable Synthesis of Monolayer Hexagonal Boron Nitride on Graphene with Giant Bandgap Renormalization.

Monolayer hexagonal boron nitride (hBN) has been widely considered a fundamental building block for 2D heterostructures and devices. However, the controlled and scalable synthesis of hBN and its 2D heterostructures has remained a daunting challenge. Here, an hBN/graphene (hBN/G) interface-mediated growth process for the controlled synthesis of high-quality monolayer hBN is proposed and further demonstrated. It is discovered that the in-plane hBN/G interface can be precisely controlled, enabling the scalable epitaxy of unidirectional monolayer hBN on graphene, which exhibits a uniform moiré superlattice consistent with single-domain hBN, aligned to the underlying graphene lattice. Furthermore, it is identified that the deep-ultraviolet emission at 6.12 eV stems from the 1s-exciton state of monolayer hBN with a giant renormalized direct bandgap on graphene. This work provides a viable path for the controlled synthesis of ultraclean, wafer-scale, atomically ordered 2D quantum materials, as well as the fabrication of 2D quantum electronic and optoelectronic devices.

Dielectric Engineering for Manipulating Exciton Transport in Semiconductor Monolayers.

The dielectric screening from the disordered media surrounding atomically thin transition metal dichalcogenides (TMDs) monolayers modifies the effective defect energy levels and thereby the transport and energy dynamics of excitons. In this work, we study this effect in WSe2 monolayers for different combinations of surrounding dielectric media. Specifically, we study the source of the anomalous diffusion of excitons in the WSe2 monolayer and attribute the anomaly to the modification of the energy distribution of defect states in different disordered dielectric environments. We use this insight to manipulate exciton transport by engineering the dielectric environment using a graphene/hexagonal boron nitride (h-BN) moiré superlattice. Finally, we observe that the effect of dielectric disorder is even more significant at high excitation fluences, contributing to the nonequilibrium phonon drag effect. These results provide an important step toward achieving control over the exciton energy transport for next-generation opto-excitonic devices.

Deep Ultraviolet Luminescence Due to Extreme Confinement in Monolayer GaN/Al(Ga)N Nanowire and Planar Heterostructures.

We present experimental results confirming extreme quantum confinement in GaN/AlxGa1-xN (x = 0.65 and 1.0) nanowire and planar heterostructures, where the GaN layer thickness is of the order of a monolayer. The results were obtained from temperature- and excitation-dependent and time-resolved photoluminescence measurements. In the GaN/AlN nanowire heterostructure array sample, the measured emission peak at 300 K is ∼5.18-5.28 eV. This is in excellent agreement with the calculated optical gap of 5.23 eV and 160-260 meV below the calculated electronic gap of 5.44 eV, suggesting that the observed emission is excitonic in nature with an exciton binding energy of ∼160-260 meV. Similarly, in the monolayer GaN/Al0.65Ga0.35N planar heterostructure, the measured emission peak at 300 K is 4.785 eV and in good agreement with the calculated optical gap of 4.68 eV and 95 meV below the calculated electronic gap of 4.88 eV. The estimated exciton binding energy is 95 meV and in close agreement with our theoretical calculations. Excitation-dependent and time-resolved photoluminescence data support the presence of excitonic transitions. Our results indicate that deep-ultraviolet excitonic light sources and microcavity devices can be realized with heterostructures incorporating monolayer-thick GaN.

Alloy-Free Band Gap Tuning across the Visible Spectrum.

We present evidence, from theory and experiment, that ZnSnN_{2} and MgSnN_{2} can be used to match the band gap of InGaN without alloying-by exploiting cation disorder in a controlled fashion. We base this on the determination of S, the long-range order parameter of the cation sublattice, for a series of epitaxial thin films of ZnSnN_{2} and MgSnN_{2} using three different techniques: x-ray diffraction, Raman spectroscopy, and in situ electron diffraction. We observe a linear relationship between S^{2} and the optical band gap of both ZnSnN_{2} (1.12-1.98 eV) and MgSnN_{2} (1.87-3.43 eV). The results clearly demonstrate the correlation between controlled heterovalent cation ordering and the optical band gap, which applies to a broad group of emerging ternary heterovalent compounds and has implications for similar trends in other material properties besides the band gap.

Charge Transition of Oxygen Vacancies during Resistive Switching in Oxide-Based RRAM.

Resistive random-access memory (RRAM) devices have attracted broad interest as promising building blocks for high-density nonvolatile memory and neuromorphic computing applications. Atomic level thermodynamic and kinetic descriptions of resistive switching (RS) processes are essential for continued device design and optimization but are relatively lacking for oxide-based RRAMs. It is generally accepted that RS occurs due to the redistribution of charged oxygen vacancies driven by an external electric field. However, this assumption contradicts the experimentally observed stable filaments, where the high vacancy concentration should lead to a strong Coulomb repulsion and filament instability. In this work, through predictive atomistic calculations in combination with experimental measurements, we attempt to understand the interactions between oxygen vacancies and the microscopic processes that are required for stable RS in a Ta2O5-based RRAM. We propose a model based on a series of charge transition processes that explains the drift and aggregation of vacancies during RS. The model was validated by experimental measurements where illuminated devices exhibit accelerated RS behaviors during SET and RESET. The activation energies of ion migration and charge transition were further experimentally determined through a transient current measurement, consistent with the modeling results. Our results help provide comprehensive understanding on the internal dynamics of RS and will benefit device optimization and applications.

Effect of growth temperature on the structural and optical properties of few-layer hexagonal boron nitride by molecular beam epitaxy.

We have studied the epitaxy of few-layer hexagonal boron nitride (h-BN) by plasma-assisted molecular beam epitaxy (MBE) using a low growth rate and nitrogen-rich condition. It has been determined that under such conditions, the growth temperature is the factor having the most significant impact on the structural and optical quality of the material. When grown at temperatures <1000 °C, the h-BN film is polycrystalline, and defect-related photoluminescence (PL) emission dominates. Epitaxial domains of exceptional crystalline quality are obtained at elevated substrate temperatures of ~1300 °C, which exhibit strong band-edge PL emission at ~220 nm and negligible defect-related emission at room temperature. Our atomistic calculations reveal that, even though the gap of h-BN is indirect, it luminesces as strongly as direct-gap materials. Experimentally, the luminescence intensity of such a few-layer h-BN sample is measured to be two orders of magnitude stronger than that of a 4-µm thick commercially grown AlN template on sapphire, demonstrating the extraordinary potential of epitaxial h-BN for deep ultraviolet (UV) optoelectronics and quantum photonics.

Sustainable p-type copper selenide solar material with ultra-large absorption coefficient.

Earth-abundant solar absorber materials with large optical absorption coefficients in the visible enable the fabrication of low-cost high-efficiency single and multi-junction thin-film solar cells. Here, we report a new p-type semiconductor, Cu4TiSe4 (CTSe), featuring indirect (1.15 eV) and direct (1.34 eV) band gaps in the optimal range for solar absorber materials. CTSe crystallizes in a new noncentrosymmetric cubic structure (space group F4[combining macron]3c) in which CuSe4 tetrahedra share edges and corners to form octahedral anionic clusters, [Cu4Se4]4-, which in turn share corners to build the three-dimensional framework, with Ti4+ ions located at tetrahedral interstices within the channels. The unique crystal structure and the Ti 3d orbital character of the conduction band of CTSe give rise to near-optimal band gap values and ultra-large absorption coefficients (larger than 105 cm-1) throughout the visible range, which are promising for scalable low-cost high-efficiency CTSe-based thin-film solar cells.

Insights on the Synthesis, Crystal and Electronic Structures, and Optical and Thermoelectric Properties of Sr1- xSb xHfSe3 Orthorhombic Perovskite.

Single-phase polycrystalline powders of Sr1- xSb xHfSe3 ( x = 0, 0.005, 0.01), a new member of the chalcogenide perovskites, were synthesized using a combination of high temperature solid-state reaction and mechanical alloying approaches. Structural analysis using single-crystal as well as powder X-ray diffraction revealed that the synthesized materials are isostructural with SrZrSe3, crystallizing in the orthorhombic space group Pnma (#62) with lattice parameters a = 8.901(2) Å; b = 3.943(1) Å; c = 14.480(3) Å; and Z = 4 for the x = 0 composition. Thermal conductivity data of SrHfSe3 revealed low values ranging from 0.9 to 1.3 W m-1 K-1 from 300 to 700 K, which is further lowered to 0.77 W m-1 K-1 by doping with 1 mol % Sb for Sr. Electronic property measurements indicate that the compound is quite insulating with an electrical conductivity of 2.9 S/cm at 873 K, which was improved to 6.7 S/cm by 0.5 mol % Sb doping. Thermopower data revealed that SrHfSe3 is a p-type semiconductor with thermopower values reaching a maximum of 287 µV/K at 873 K for the 1.0 mol % Sb sample. The optical band gap of Sr1- xSb xHfSe3 samples, as determined by density functional theory calculations and the diffuse reflectance method, is ∼1.00 eV and increases with Sb concentration to 1.15 eV. Careful analysis of the partial densities of states (PDOS) indicates that the band gap in SrHfSe3 is essentially determined by the Se-4p and Hf-5d orbitals with little to no contribution from Sr atoms. Typically, band edges of p- and d-character are a good indication of potentially strong absorption coefficient due to the high density of states of the localized p and d orbitals. This points to potential application of SrHfSe3 as absorbing layer in photovoltaic devices.

Electronic and Optical Properties of Two-Dimensional GaN from First-Principles.

Gallium nitride (GaN) is an important commercial semiconductor for solid-state lighting applications. Atomically thin GaN, a recently synthesized two-dimensional material, is of particular interest because the extreme quantum confinement enables additional control of its light-emitting properties. We performed first-principles calculations based on density functional and many-body perturbation theory to investigate the electronic, optical, and excitonic properties of monolayer and bilayer two-dimensional (2D) GaN as a function of strain. Our results demonstrate that light emission from monolayer 2D GaN is blueshifted into the deep ultraviolet range, which is promising for sterilization and water-purification applications. Light emission from bilayer 2D GaN occurs at a similar wavelength to its bulk counterpart due to the cancellation of the effect of quantum confinement on the optical gap by the quantum-confined Stark shift. Polarized light emission at room temperature is possible via uniaxial in-plane strain, which is desirable for energy-efficient display applications. We compare the electronic and optical properties of freestanding two-dimensional GaN to atomically thin GaN wells embedded within AlN barriers in order to understand how the functional properties are influenced by the presence of barriers. Our results provide microscopic understanding of the electronic and optical characteristics of GaN at the few-layer regime.

Giant Ferroelectric Polarization in Ultrathin Ferroelectrics via Boundary-Condition Engineering.

Tailoring and enhancing the functional properties of materials at reduced dimension is critical for continuous advancement of modern electronic devices. Here, the discovery of local surface induced giant spontaneous polarization in ultrathin BiFeO3 ferroelectric films is reported. Using aberration-corrected scanning transmission electron microscopy, it is found that the spontaneous polarization in a 2 nm-thick ultrathin BiFeO3 film is abnormally increased up to ≈90-100 µC cm-2 in the out-of-plane direction and a peculiar rumpled nanodomain structure with very large variation in c/a ratios, which is analogous to morphotropic phase boundaries (MPBs), is formed. By a combination of density functional theory and phase-field calculations, it is shown that it is the unique single atomic Bi2 O3-x layer at the surface that leads to the enhanced polarization and appearance of the MPB-like nanodomain structure. This finding clearly demonstrates a novel route to the enhanced functional properties in the material system with reduced dimension via engineering the surface boundary conditions.

Electronic and optical properties of oxygen vacancies in amorphous Ta2O5 from first principles.

Oxygen vacancies are important defects considered to play a central role in the electronic and optical properties of tantalum pentoxide (Ta2O5) films and devices. Despite extensive experimental studies on oxygen vacancies in Ta2O5, the reported defect states are ambiguously identified due to the absence of accurate and conclusive theoretical evidence. Here we investigate the thermodynamic, electronic, and optical properties of oxygen vacancies in amorphous Ta2O5 by first-principles calculations based on hybrid-functional density functional theory (DFT). The calculated thermodynamic and optical transition levels are in good agreement with a broad range of diverse measured properties with various experimental methods, providing conclusive evidence for the identification of the defect states observed in experiments as originating from oxygen vacancies. Our calculations also predict the formation of spin-polarized polarons. Our results elucidate the fundamental atomistic properties of oxygen vacancies in various oxidation states as a function of growth conditions and provide guidance to control the properties of Ta2O5 films/devices.

Tuning Ionic Transport in Memristive Devices by Graphene with Engineered Nanopores.

Memristors, based on inherent memory effects in simple two-terminal structures, have attracted tremendous interest recently for applications ranging from nonvolatile data storage to neuromorphic computing based on non-von Neumann architectures. In a memristor, the ability to modulate and retain the state of an internal variable leads to experimentally observed resistive switching (RS) effects. Such phenomena originate from internal, microscopic ionic migration and associated electrochemical processes that modify the materials' electrical and other physical properties. To optimize the device performance for practical applications with large-size arrays, controlling the internal ionic transport and redox reaction processes thus becomes a necessity, ideally at the atomic scale. Here we show that the RS characteristics in tantalum-oxide-based memristors can be systematically tuned by inserting a graphene film with engineered nanopores. Graphene, with its atomic thickness and excellent impermeability and chemical stability, can be effectively integrated into the device stack and can offer unprecedented capabilities for the control of ionic dynamics at the nanoscale. In this device structure, the graphene film effectively blocks ionic transport and redox reactions; thereby the oxygen vacancies required during the RS process are allowed to transport only through the engineered nanosized openings in the graphene layer, leading to effective modulation of the device performance by controlling the nanopore size in graphene. The roles of graphene as an ion-blocking layer in the device structure were further supported by transmission electron microscopy, energy-dispersive X-ray spectroscopy, and atomistic simulations based on first-principles calculations.

Protecting the properties of monolayer MoS2 on silicon based substrates with an atomically thin buffer.

Semiconducting 2D materials, like transition metal dichalcogenides (TMDs), have gained much attention for their potential in opto-electronic devices, valleytronic schemes, and semi-conducting to metallic phase engineering. However, like graphene and other atomically thin materials, they lose key properties when placed on a substrate like silicon, including quenching of photoluminescence, distorted crystalline structure, and rough surface morphology. The ability to protect these properties of monolayer TMDs, such as molybdenum disulfide (MoS2), on standard Si-based substrates, will enable their use in opto-electronic devices and scientific investigations. Here we show that an atomically thin buffer layer of hexagonal-boron nitride (hBN) protects the range of key opto-electronic, structural, and morphological properties of monolayer MoS2 on Si-based substrates. The hBN buffer restores sharp diffraction patterns, improves monolayer flatness by nearly two-orders of magnitude, and causes over an order of magnitude enhancement in photoluminescence, compared to bare Si and SiO2 substrates. Our demonstration provides a way of integrating MoS2 and other 2D monolayers onto standard Si-substrates, thus furthering their technological applications and scientific investigations.

Anisotropic Spin Transport and Strong Visible-Light Absorbance in Few-Layer SnSe and GeSe.

SnSe and GeSe are layered compound semiconductors that can be exfoliated to form two-dimensional materials. In this work, we use predictive calculations based on density functional and many-body perturbation theory to study the electronic and optical properties of single-layer, double-layer, and bulk SnSe and GeSe. The fundamental band gap is direct in single-layer and double-layer GeSe, but indirect in single-layer and double-layer SnSe. Moreover, the interplay of spin-orbit coupling and lack of inversion symmetry in the monolayer structures results in anisotropic spin splitting of the energy bands, with potential applications in directionally dependent spin transport. We also show that single-layer and double-layer SnSe and GeSe exhibit unusually strong optical absorbance in the visible range. Our results suggest that single-layer and double-layer SnSe and GeSe are promising materials for ultrathin-film photovoltaic applications with theoretical upper bounds to the conversion efficiency that approach the efficiency records realized in organic and dye-sensitized solar cells.

Pb7Bi4Se13: a lillianite homologue with promising thermoelectric properties.

Pb(7)Bi(4)Se(13) crystallizes in the monoclinic space group C2/m (No. 12) with a = 13.991(3) Å, b = 4.262(2) Å, c = 23.432(5) Å, and ß = 98.3(3)° at 300 K. In its three-dimensional structure, two NaCl-type layers A and B with respective thicknesses N(1) = 5 and N(2) = 4 [N = number of edge-sharing (Pb/Bi)Se6 octahedra along the central diagonal] are arranged along the c axis in such a way that the bridging monocapped trigonal prisms, PbSe7, are located on a pseudomirror plane parallel to (001). This complex atomic-scale structure results in a remarkably low thermal conductivity (∼0.33 W m(-1) K(-1) at 300 K). Electronic structure calculations and diffuse-reflectance measurements indicate that Pb(7)Bi(4)Se(13) is a narrow-gap semiconductor with an indirect band gap of 0.23 eV. Multiple peaks and valleys were observed near the band edges, suggesting that Pb(7)Bi(4)Se(13) is a promising compound for both n- and p-type doping. Electronic-transport data on the as-grown material reveal an n-type degenerate semiconducting behavior with a large thermopower (∼-160 µV K(-1) at 300 K) and a relatively low electrical resistivity. The inherently low thermal conductivity of Pb(7)Bi(4)Se(13) and its tunable electronic properties point to a high thermoelectric figure of merit for properly optimized samples.

Designing interchain and intrachain properties of conjugated polymers for latent optical information encoding.

Building molecular-design insights for controlling both the intrachain and the interchain properties of conjugated polymers (CPs) is essential to determine their characteristics and to optimize their performance in applications. However, most CP designs have focused on the conjugated main chain to control the intrachain properties, while the design of side chains is usually used to render CPs soluble, even though the side chains critically affect the interchain packing. Here, we present a straightforward and effective design strategy for modifying the optical and electrochemical properties of diketopyrrolopyrrole-based CPs by controlling both the intrachain and interchain properties in a single system. The synthesized polymers, P1, P2 and P3, show almost identical optical absorption spectra in solution, manifesting essentially the same intrachain properties of the three CPs having restricted effective conjugation along the main chain. However, the absorption spectra of CP films are gradually tuned by controlling the interchain packing through the side-chain design. Based on the tailored optical properties, we demonstrate the encoding of latent optical information utilizing the CPs as security inks on a silica substrate, which reveals and conceals hidden information upon the reversible aggregation/deaggregation of CPs.

Visible-wavelength polarized-light emission with small-diameter InN nanowires.

Group III nitrides are widely used in commercial visible-wavelength optoelectronic devices, but materials issues such as dislocations, composition fluctuations, and strain negatively impact their efficiency. Nitride nanostructures are a promising solution to overcome these issues and to improve device performance. We used first-principles calculations based on many-body perturbation theory to study the electronic and optical properties of small-diameter InN nanowires. We show that quantum confinement in 1 nm wide InN nanowires shifts optical emission to the visible range at green/cyan wavelengths and inverts the order of the top valence bands, leading to linearly polarized visible-light emission. Quantum confinement on this scale also leads to large exciton binding energies of 1.4 eV and electronic band gaps in excess of 3.7 eV. Our results indicate that strong quantum confinement in InN nanostructures is a promising approach to developing efficient visible-wavelength light emitters.