Effects of measured and simulated diffraction from a plate on sound source localization.

In daily life, natural or man-made structures influence sound propagation, causing reflections and diffraction with potential effects on auditory spatial perception. While the effect of isolated reflections on binaural localization has been investigated, consequences of edge diffraction on spatial perception have received less attention. Here, effects of edge diffraction on the horizontal localization of a sound source were assessed when a flat square plate occludes the direct sound or produces a reflection in an otherwise anechoic environment. Binaural recordings were obtained with an artificial head for discrete sound source positions along two horizontal trajectories in the vicinity of the plate, including conditions near the incident and reflection shadow boundary. In a listening test, the apparent source position was matched for conditions with and without the plate, resulting in azimuth offsets between the apparent and physical source of up to 12°. The perceived direction of occluded frontal sound sources was laterally shifted to the visible region near the edge of the plate. Geometrical-acoustics-based simulations with different methods to binaurally render diffracted sound paths were technically and perceptually compared to the measurements. The observed localization offset was reproduced with the acoustic simulations when diffraction was rendered considering the individual ear positions.

Variations of skin thermal diffusivity on different skin regions.

BACKGROUND AND OBJECTIVE: Skin thermal diffusivity plays a crucial role in various applications, including laser therapy and cryogenic skin cooling.This study investigates the correlation between skin thermal diffusivity and two important skin parameters, melanin content and erythema, in a cohort of 102 participants. METHODS: An in-house developed device based on transient temperature measurement was used to assess thermal diffusivity at different body locations. Melanin content and erythema were measured using a colorimeter. Statistical analysis was performed to examine potential correlations. RESULTS: The results showed that the measured thermal diffusivity values were consistent with previous reports, with variations observed among subjects. No significant correlation was found between thermal diffusivity and melanin content or erythema. This suggests that other factors, such as skin hydration or epidermis thickness, may have a more dominant influence on skin thermal properties. CONLCUSION: This research provides valuable insights into the complex interplay between skin thermal properties and physiological parameters, with potential implications for cosmetic and clinical dermatology applications.

Proton-Conducting Membranes from Polyphenylenes Containing Armstrong's Acid.

This study demonstrates the use of 1,5-naphthalenedisulfonic acid as a suitable building block for the efficient and economic preparation of alternating sulfonated polyphenylenes with high ion-exchange capacity (IEC) via Suzuki polycondensation. Key to large molar masses is the use of an all-meta-terphenyl comonomer instead of m-phenyl, the latter giving low molar masses and brittle materials. A protection/deprotection strategy for base-stable neopentyl sulfonates is successfully implemented to improve the solubility and molar mass of the polymers. Solution-based deprotection of polyphenylene neopentyl sulfonates at 150 °C in dimethylacetamide eliminates isopentylene quantitatively, resulting in membranes with high IEC (2.93 mequiv/g) and high proton conductivity (σ = 138 mS/cm). Water solubility of these copolymers with high IEC requires thermal cross-linking to prevent their dissolution under operating conditions. By balancing the temperature and time of the cross-linking process, water uptake can be restricted to 50 wt %, retaining an IEC of 2.33 mequiv/g and a conductivity of 85 mS/cm. Chemical stability is addressed by treatment of the membranes under Fenton's conditions and by considering barrier heights for desulfonation using density functional theory (DFT) calculations. The DFT results suggest that 1,5-disulfonated naphthalenes are at least as stable as sulfonated polyphenylenes against desulfonation.

Rydberg electron stabilizes the charge localized state of the diamine cation.

A previous controversial discussion regarding the interpretation of Rydberg spectra of gaseous dimethylpiperazine (DMP) as showing the co-existence of a localized and delocalized mixed-valent DMP+ radical cation is revisited. Here we show by high-level quantum-chemical calculations that an apparent barrier separating localized and delocalized DMP+ minima in previous multi-reference configuration-interaction (MRCI) calculations and in some other previous computations were due to unphysical curve crossings of the reference wave functions. These discontinuities on the surface are removed in state-averaged MRCI calculations and with some other, orthogonal high-level approaches, which do not provide a barrier and thus no localized minimum. We then proceed to show that in the actually observed Rydberg state of neutral DMP the 3s-type Rydberg electron binds more strongly to a localized positive charge distribution, generating a localized DMP* Rydberg-state minimum, which is absent for the DMP+ cation. This work presents a case where interactions of a Rydberg electron with the underlying cationic core alter molecular structure in a fundamental way.

Development of a diffusion-weighed mathematical model for intradermal drainage quantification.

The quantitative assessment of lymphatic dermal clearance using NIR fluorescent tracers is particularly important for the early diagnosis of several potential disabling diseases. Currently, half-life values are computed using a mono-exponential mathematical model, neglecting diffusion of the tracer within the dermis after injection. The size and position of the region of interest are subjectively manually selected around the point of injection on the skin surface where the fluorescence signal intensity is averaged, neglecting any spatial information contained in the image. In this study we present and test a novel mathematical model allowing the objective quantification of dermal clearance, taking into consideration potential dermal diffusion. With only two parameters, this "clearance-diffusion" model is simple enough to be applied in a variety of settings and requires almost no prior information about the system. We demonstrate that if dermal diffusion is low, the mono-exponential approach is suitable but still lacking objectivity. However, if dermal diffusion is substantial, the clearance-diffusion model is superior and allows the accurate calculation of half-life values.

Spatial Resolution of Late Reverberation in Virtual Acoustic Environments.

Late reverberation involves the superposition of many sound reflections, approaching the properties of a diffuse sound field. Since the spatially resolved perception of individual late reflections is impossible, simplifications can potentially be made for modelling late reverberation in room acoustics simulations with reduced spatial resolution. Such simplifications are desired for interactive, real-time virtual acoustic environments with applications in hearing research and for the evaluation of hearing supportive devices. In this context, the number and spatial arrangement of loudspeakers used for playback additionally affect spatial resolution. The current study assessed the minimum number of spatially evenly distributed virtual late reverberation sources required to perceptually approximate spatially highly resolved isotropic and anisotropic late reverberation and to technically approximate a spherically isotropic sound field. The spatial resolution of the rendering was systematically reduced by using subsets of the loudspeakers of an 86-channel spherical loudspeaker array in an anechoic chamber, onto which virtual reverberation sources were mapped using vector base amplitude panning. It was tested whether listeners can distinguish lower spatial resolutions of reproduction of late reverberation from the highest achievable spatial resolution in different simulated rooms. The rendering of early reflections remained unchanged. The coherence of the sound field across a pair of microphones at ear and behind-the-ear hearing device distance was assessed to separate the effects of number of virtual sources and loudspeaker array geometry. Results show that between 12 and 24 reverberation sources are required for the rendering of late reverberation in virtual acoustic environments.

Investigating a Lock-In Thermal Imaging Setup for the Detection and Characterization of Magnetic Nanoparticles.

Magnetic hyperthermia treatments utilize the heat generated by magnetic nanoparticles stimulated by an alternating magnetic field. Therefore, analytical methods are required to precisely characterize the dissipated thermal energy and to evaluate potential amplifying or diminishing factors in order to ensure optimal treatment conditions. Here, we present a lock-in thermal imaging setup specifically designed to thermally measure magnetic nanoparticles and we investigate theoretically how the various experimental parameters may influence the measurement. We compare two detection methods and highlight how an affordable microbolometer can achieve identical sensitivity with respect to a thermal camera-based system by adapting the measurement time. Furthermore, a numerical model is used to demonstrate the optimal stimulation frequency, the degree of nanomaterial heating power, preferential sample holder dimensions and the extent of heat losses to the environment. Using this model, we also revisit some technical assumptions and experimental results that previous studies have stated and suggest an optimal experimental configuration.

Improving the Solubility of Halogenated 1-Ammonio-closo-dodecaborate Anions.

The partly halogenated and N-alkylated closo-dodecaborates [B12Cl6H5N(propyl)3]- and [B12Br6H5NR3]- (R = ethyl-pentyl) were prepared by alkylation of [B12H11NH3]- and subsequent halogenation with elemental chlorine or N-bromosuccinimide. Simple metathesis reactions yielded the [HNMe3]+, [C6mim]+, [NBu4]+, and Na+ salts, which were characterized by heteronuclear NMR and IR spectroscopy as well as electrospray ionization mass spectrometry. The crystal structures of the salts [HNMe3][B12Br6H5N(ethyl)3]·CH3CN, [HNMe3][B12Br6H5N(propyl)3], Na[B12Br6H5N(butyl)3], and [HNMe3][B12Cl7H4N(propyl)3]·CH3CN were determined by single-crystal X-ray diffraction. The [C6mim]+ salts are thermally stable to temperatures higher than 300 °C. The melting points are between 57 and 80 °C, which classify the [C6mim]+ salts of [B12Cl6H5N(propyl)3]- and [B12Br6H5NR3]- (R = propyl-pentyl) as ionic liquids. The anions are oxidized only at potentials higher than 2 V versus Fc0/+ as determined by cyclic voltammetry. The solubility of the sodium salts in CH2Cl2 solution was determined by NMR spectroscopy. With the increasing length of the alkyl chain attached to the ammonio group the solubility is significantly enhanced. A solubility up to 125 mmol/L for Na[B12Br6H5N(pentyl)3] in dichloromethane was determined. In addition, the trialkylation of the perchlorinated anion [B12Cl11NH3]- was investigated in detail. A Hofmann elimination was observed to occur at higher temperatures, when alkyl groups with ß-hydrogen atoms were introduced. Organic substituents without ß-hydrogen atoms gave more stable compounds; however, trialkylation proved to be difficult presumably due to steric hindrance. The crystal structure of the byproduct [PPh4]2[B12Cl11N(propargyl)2] was determined.

Alkoxy substituted halogenated closo-dodecaborates as anions for ionic liquids.

Halogenated and alkoxylated closo-dodecaborates [B12X11OR](2-) (X = Cl, Br; R = propyl, octyl, dodecyl) have been synthesized by halogenation of the known [B12H11OH](2-) anion followed by alkylation in the superbasic medium DMSO/KOH. The obtained sodium salts were transformed by simple metathesis reactions in aqueous solution to the tetrabutylammonium ([NBu4](+)) and 1-hexyl-3-methylimidazolium ([C6mim](+)) salts. All compounds were fully characterized by heteronuclear NMR, IR and Raman spectroscopy, ESI mass spectrometry, and thermal analytical measurements. Selected anions were also structurally characterized as their [Ph4P](+) salts by single crystal X-ray diffraction. The [C6mim](+) salts are thermally stable up to more than 300 °C and show clear melting points. Surprisingly, the compound [C6mim]2[B12Cl11O-propyl] having the short propyl group bound to the boron cluster shows the lowest melting point (96 °C) of all the investigated compounds. Thus this compound is a rare member of the class of ionic liquids consisting of dianions.

Influence of chemically p-type doped active organic semiconductor on the film thickness versus performance trend in cyanine/C60 bilayer solar cells.

Simple bilayer organic solar cells rely on very thin coated films that allow for effective light absorption and charge carrier transport away from the heterojunction at the same time. However, thin films are difficult to coat on rough substrates or over large areas, resulting in adverse shorting and low device fabrication yield. Chemical p-type doping of organic semiconductors can reduce Ohmic losses in thicker transport layers through increased conductivity. By using a Co(III) complex as chemical dopant, we studied doped cyanine dye/C60 bilayer solar cell performance for increasing dye film thickness. For films thicker than 50 nm, doping increased the power conversion efficiency by more than 30%. At the same time, the yield of working cells increased to 80%. We addressed the fate of the doped cyanine dye, and found no influence of doping on solar cell long term stability.

TTC staining of damaged brain areas after MCA occlusion in the rat does not constrict quantitative gene and protein analyses.

In models of ischemic stroke, TTC (2,3,5-triphenyltetrazolium chloride) staining is commonly applied for the fast and reliable visualization of hypoxic brain tissue and for defining the size of cerebral infarction and penumbra. Deciphering molecular processes of pathogenesis within the penumbra is of particular interest for the development of therapeutic strategies. The aim of this study was to assess whether TTC-stained tissues can easily and in a reliable quantitative manner be processed for further molecular and biochemical analyses. We applied phenol-based RNA isolation, protein lysis by conventional RIPA buffer, and combined RNA/protein isolation with NucleoSpinRNA/Protein-Kit. Gene and protein expression analyses were performed by RT-rtPCR and Western-blotting. Middle cerebral arteria occlusion (MCAO) in rats was performed following a standardized experimental procedure. After MCAO, TTC staining revealed massive cell death in cortical and sub-cortical areas. TTC processing did not affect the quality of tissue RNA and protein. The expression of housekeeping and regulatory genes and proteins revealed no difference between control and TTC-stained groups. The expression of known stroke-regulated genes such as TNFalpha and IL1beta revealed similar induction profiles after TTC staining as described in the literature. TTC staining allows the precise delineation of lesioned and primarily non-lesioned brain areas for subsequent dissection of selected tissue pieces for molecular analysis. Our study demonstrates that TTC-stained tissues in stroke animal models can be used for quantitative gene and protein expression analyses without constriction. Pathomechanisms of ongoing tissue damage within the penumbra region can now be investigated in detail.

An improved method for the isolation of free-circulating plasma DNA and cell-free DNA from other body fluids.

Cell-free DNA is of increasing interest in different fields, such as cancer research, prenatal diagnosis, and the diagnosis of nonmalignant diseases. The quantity of free-circulating DNA in plasma, serum, and other body fluids is usually low and its isolation is still a challenge. Here we evaluate the application of the new commercially available NucleoSpin Plasma XS Kit for the isolation of cell-free DNA from plasma, serum, and cell-free bronchial lavage samples. The NucleoSpin columns proved superior to the QIAamp system in terms of DNA yield, purity, and retrieval of small DNA fragments. The procedure is fast and easy to standardize and might be valuable for laboratories working in the field of CNAPS.

Two immediate-early pathogen-responsive members of the AtCMPG gene family in Arabidopsis thaliana and the W-box-containing elicitor-response element of AtCMPG1.

The Arabidopsis thaliana genome contains at least 50 predicted AtCMPG genes. The encoded protein family is defined by a common domain possessing four strictly conserved amino acid residues [Cys, Met, Pro, and Gly (CMPG)] that designate the family. Two members, AtCMPG1 and AtCMPG2, with high sequence similarity to the previously described, immediate-early pathogen-responsive PcCMPG1 gene from Petroselinum crispum were selected for analysis of their expression modes and defense-related promoter elements. Among the most striking similarities with PcCMPG1 were immediate-early transcriptional activation on infection or treatment with a pathogen-derived elicitor and the functional importance of a W-box-containing AtCMPG1 promoter element. Remarkably, this strongly pathogen/elicitor-responsive element, F, did not respond to wounding, in contrast to the AtCMPG1 promoter itself. Comparative analysis, both within the A. thaliana genome and across species, provided further insight into the large structural diversity of W-box-containing elements. Possible roles of AtCMPG proteins in regulatory processes are discussed with reference to a large variety of family members, partly with assigned functions, from plants as well as animals.