Development of dispersive XAFS system for analysis of time-resolved spatial distribution of electrode reaction.

Apparatus for a technique based on the dispersive optics of X-ray absorption fine structure (XAFS) has been developed at beamline BL-5 of the Synchrotron Radiation Center of Ritsumeikan University. The vertical axis of the cross section of the synchrotron light is used to disperse the X-ray energy using a cylindrical polychromator and the horizontal axis is used for the spatially resolved analysis with a pixel array detector. The vertically dispersive XAFS (VDXAFS) instrument was designed to analyze the dynamic changeover of the inhomogeneous electrode reaction of secondary batteries. The line-shaped X-ray beam is transmitted through the electrode sample, and then the dispersed transmitted X-rays are detected by a two-dimensional detector. An array of XAFS spectra in the linear footprint of the transmitted X-ray on the sample is obtained with the time resolution of the repetition frequency of the detector. Sequential measurements of the space-resolved XAFS data are possible with the VDXAFS instrument. The time and spatial resolutions of the VDXAFS instrument depend on the flux density of the available X-ray beam and the size of the light source, and they were estimated as 1 s and 100 µm, respectively. The electrode reaction of the LiFePO4 lithium ion battery was analyzed during the constant current charging process and during the charging process after potential jumping.