Role of Electronegativity in Environmentally Persistent Free Radicals (EPFRs) Formation on ZnO.

Environmentally persistent free radicals (EPFRs), a group of emerging pollutants, have significantly longer lifetimes than typical free radicals. EPFRs form by the adsorption of organic precursors on a transition metal oxide (TMO) surface involving electron charge transfer between the organic and TMO. In this paper, dihalogenated benzenes were incorporated to study the role of electronegativity in the electron transfer process to obtain a fundamental knowledge of EPFR formation mechanism on ZnO. Upon chemisorption on ZnO nanoparticles at 250 °C, electron paramagnetic resonance (EPR) confirms the formation of oxygen adjacent carbon-centered organic free radicals with concentrations between 1016 and 1017 spins/g. The radical concentrations show a trend of 1,2-dibromobenzene (DBB) > 1,2-dichlorobenzene (DCB) > 1,2-difluorobenzene (DFB) illustrating the role of electronegativity on the amount of radical formation. X-ray absorption spectroscopy (XAS) confirms the reduction of the Zn2+ metal center, contrasting previous experimental evidence of an oxidative mechanism for ZnO single crystal EPFR formation. The extent of Zn reduction for the different organics (DBB > DCB > DFB) also correlates to their polarity. DFT calculations provide theoretical evidence of ZnO surface reduction and exhibit a similar trend of degree of reduction for different organics, further building on the experimental findings. The lifetimes of the EPFRs formed confirm a noteworthy persistency.

Predictive role of magnetic resonance imaging in the distinction of isocitrate dehydrogenase (IDH) mutant grade 4 astrocytomas versus glioblastomas.

BACKGROUND: Isocitrate dehydrogenase (IDH) mutation status is a crucial prognostic factor in high-grade glial tumors. PURPOSE: To investigate whether magnetic resonance imaging (MRI) features can display a diagnostic performance in the determination of IDH mutation in high-grade gliomas. MATERIAL AND METHODS: A total of 170 patients including 24 IDH mutant grade 4 astrocytomas and 146 glioblastomas (GBM) were retrospectively examined via contrast-enhanced (CE) MRI before surgery. Immunohistochemistry and genomic sequence analyses were performed on specimen materials for the determination of IDH mutational status. Certain morphological and diffusion-weighted imaging (DWI) parameters were utilized to see if they could play a role to be non-invasive potential imaging predictors in the discrimination of IDH mutant versus wild-type (WT) high-grade gliomas. RESULTS: On histopathological examination, IDH mutation was detected in 24 patients with high-grade glioma and 146 of the patients were found to be WT. Certain morphological criteria of tumor location and involvement, tumor margins, visual detection of diffusion restriction on DWI, and quantitative apparent diffusion coefficient (ADC) parameters consisting of ADCmean, ADCmin, and ADCr could be used as imaging predictors in the discrimination of high-grade IDH mutant versus WT tumors. CONCLUSION: Certain MRI morphologic features and visual detection of diffusion restriction on DWI and quantitative ADC parameters consisting of ADCmean, ADCmin, and ADCr can be considered non-invasive, significant independent imaging predictors in the discrimination and can obviate invasive procedures for histopathological diagnosis.

Emergent properties from CuPd alloy films under near-infrared excitation.

Noble-transition metal alloys offer emergent optical and electronic properties for near-infrared (NIR) optoelectronic devices. We investigate the optical and electronic properties of CuxPd1-x alloy thin films and their ultrafast electron dynamics under NIR excitation. Ultraviolet photoelectron spectroscopy measurements supported by density functional theory calculations show strong d-band hybridization between the Cu 3d and Pd 4d bands. These hybridization effects result in emergent optical properties, most apparent in the dilute Pd case. Time-resolved terahertz spectroscopy with NIR (e.g., 1550 nm) excitation displays composition-tunable electron dynamics. We posit that the negative peak in the normalized increment of transmissivity (ΔT/T) below 2 ps from dilute Pd alloys is due to non-thermalized hot-carrier generation. On the other hand, Pd-rich alloys exhibit an increase in ΔT/T due to thermalization effects upon ultrafast NIR photoexcitation. CuxPd1-x alloys in the dilute Pd regime may be a promising material for future ultrafast NIR optoelectronic devices.

Resonant Plasmonic-Biomolecular Chiral Interactions in the Far-Ultraviolet: Enantiomeric Discrimination of sub-10 nm Amino Acid Films.

Resonant plasmonic-molecular chiral interactions are a promising route to enhanced biosensing. However, biomolecular optical activity primarily exists in the far-ultraviolet regime, posing significant challenges for spectral overlap with current nano-optical platforms. We demonstrate experimentally and computationally the enhanced chiral sensing of a resonant plasmonic-biomolecular system operating in the far-UV. We develop a full-wave model of biomolecular films on Al gammadion arrays using experimentally derived chirality parameters. Our calculations show that detectable enhancements in the chiroptical signals from small amounts of biomolecules are possible only when tight spectral overlap exists between the plasmonic and biomolecular chiral responses. We support this conclusion experimentally by using Al gammadion arrays to enantiomerically discriminate ultrathin (<10 nm thick) films of tyrosine. Notably, the chiroptical signals of the bare films were within instrumental noise. Our results demonstrate the importance of using far-UV active metasurfaces for enhancing natural optical activity.

Large-Area, High-Specific-Power Schottky-Junction Photovoltaics from CVD-Grown Monolayer MoS2.

The deployment of two-dimensional (2D) materials for solar energy conversion requires scalable large-area devices. Here, we present the design, modeling, fabrication, and characterization of monolayer MoS2-based lateral Schottky-junction photovoltaic (PV) devices grown by using chemical vapor deposition (CVD). The device design consists of asymmetric Ti and Pt metal contacts with a work function offset to enable charge separation. These early stage devices show repeatable performance under 1 sun illumination, with VOC of 160 mV, JSC of 0.01 mA/cm2, power conversion efficiency of 0.0005%, and specific power of 1.58 kW/kg. An optoelectronic model for this device is developed and validated with experimental results. This model is used to understand loss mechanisms and project optimized device designs. The model predicts that a 2D PV device with ∼70 kW/kg of specific power can be achieved with minimum optimization to the current devices. By increasing the thickness of the absorber layer, we can achieve even higher performance devices. Finally, a 25 mm2 area solar cell made with a 0.65 nm thick MoS2 monolayer is demonstrated, showing VOC of 210 mV under 1 sun illumination. This is the first demonstration of a large-area PV device made with CVD-grown scalable 2D materials.

Molecular quantum interference effects on thermopower in hybrid 2-dimensional monolayers.

Quantum interference effects in single-molecule devices can significantly enhance the thermoelectric properties of these devices. However, single-molecule systems have limited utility for power conversion. In this work, we study the effects of destructive quantum interference in molecular junctions on the thermoelectric properties of hybrid, 2-dimensional molecule-nanoparticle monolayers. We study two isomers of benzenedithiol molecules, with either a para or meta configuration for the thiol groups, as molecular interlinkers between gold nanoparticles in the structure. The asymmetrical structure in the meta configuration significantly improves the Seebeck coefficient and power factor over the para configuration. These results suggest that thermoelectric performance of engineered, nanostructured material can be enhanced by harnessing quantum interference effects in the substituent components.

CoCrFeNi High-Entropy Alloy as an Enhanced Hydrogen Evolution Catalyst in an Acidic Solution.

High-entropy alloys (HEAs) have intriguing material properties, but their potential as catalysts has not been widely explored. Based on a concise theoretical model, we predict that the surface of a quaternary HEA of base metals, CoCrFeNi, should go from being nearly fully oxidized except for pure Ni sites when exposed to O2 to being partially oxidized in an acidic solution under cathodic bias, and that such a partially oxidized surface should be more active for the electrochemical hydrogen evolution reaction (HER) in acidic solutions than all the component metals. These predictions are confirmed by electrochemical and surface science experiments: the Ni in the HEA is found to be most resistant to oxidation, and when deployed in 0.5 M H2SO4, the HEA exhibits an overpotential of only 60 mV relative to Pt for the HER at a current density of 1 mA/cm2.

Modifying Metastable Sr1-xBO3-δ (B = Nb, Ta, and Mo) Perovskites for Electrode Materials.

The presence of surface/deep defects in 4d- and 5d-perovskite oxide (ABO3, B = Nb, Ta, Mo, etc.) nanoparticles (NPs), originating from multivalent B-site cations, contributes to suppressing their metallic properties. These defect states can be removed using a H2/Ar thermal treatment, enabling the recovery of their electronic properties (i.e., low electrical resistivity, high carrier concentration, etc.) as expected from their electronic structure. Therefore, to engineer the electronic properties of these metastable perovskites, an oxygen-controlled crystallization approach coupled with a subsequent H2/Ar treatment was utilized. A comprehensive study of the effect of the post-treatment time on the electronic properties of these perovskite NPs was performed using a combination of scattering, spectroscopic, and computational techniques. These measurements revealed that a metallic-like state is stabilized in these oxygen-reduced NPs due to the suppression of deep rather than surface defects. Ultimately, this synthetic approach can be employed to synthesize ABO3 perovskite NPs with tunable electronic properties for application into electrochemical devices.

Electrolysis on a Chip with Tunable Thin Film Nanostructured PGM Electrocatalysts Generated from Self-Assembled Block Copolymer Templates.

Self-assembled block copolymers are promising templates for fabricating thin film materials with tuned periodic feature sizes and geometry at the nanoscale. Here, a series of nanostructured platinum and iridium oxide electrocatalysts templated from poly(styrene)-block-poly(vinyl pyridine) (PSbPVP) block copolymers via an incipient wetness impregnation (IWI) pathway is reported. Both nanowire and nanocylinder electrocatalysts of varying feature sizes are assessed and higher catalyst loadings are achieved by the alkylation of the pyridine moieties in the PVP block prior to IWI. Electrocatalyst evaluations featuring hydrogen pump and water electrolysis demonstrations are carried out on interdigitated electrode (IDE) chips flexible with liquid supporting electrolytes and thin film polymer electrolytes. Notably, the mass activities of the nanostructured electrocatalysts from alkylated block copolymer templates are 35%-94% higher than electrocatalysts from non-alkylated block copolymer templates. Standing cylinder nanostructures lead to higher mass activities than lamellar variants despite their not having the largest surface area per unit catalyst loading demonstrating that mesostructure architectures have a profound impact on reactivity. Overall, IDE chips with model thin film electrocatalysts prepared from self-assembled block copolymers offer a high-throughput experimental method for correlating electrocatalyst nanostructure and composition to electrochemical reactivity.

Formation of Environmentally Persistent Free Radicals (EPFRs) on the Phenol-Dosed α-Fe2O3(0001) Surface.

Environmentally persistent free radicals (EPFRs) are a class of toxic air pollutants that are found to form by the chemisorption of substituted aromatic molecules on the surface of metal oxides. In this study, we employ X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) to perform a temperature-dependent study of phenol adsorption on α-Fe2O3(0001) to probe the radical formation mechanism by monitoring changes in the electronic structure of both the adsorbed phenol and metal oxide substrate. Upon dosing at room temperature, new phenol-derived electronic states have been clearly observed in the UPS spectrum at saturation coverage. However, upon dosing at high temperature (>200 °C), both photoemission techniques have shown distinctive features that strongly suggest electron transfer from adsorbed phenol to Fe2O3 surface atoms and consequent formation of a surface radical. Consistent with the experiment, DFT calculations show that phenoxyl adsorption on the iron oxide surface at RT leads to a minor charge transfer to the adsorbed molecule. The experimental findings at high temperatures agree well with the EPFRs' proposed formation mechanism and can guide future experimental and computational studies.

Uniform Mesoporous Amorphous Cobalt-Inherent Silicon Oxide as a Highly Active Heterogeneous Catalyst in the Activation of Peroxymonosulfate for Rapid Oxidation of 2,4-Dichlorophenol: The Important Role of Inherent Cobalt in the Catalytic Mechanism.

Amorphous cobalt-inherent silicon oxide (Co-SiOx) was synthesized for the first time and employed as a highly active catalyst in the activation of peroxymonosulfate (PMS) for the rapid oxidation of 2,4-dichlorophenol (2,4-DCP). The characterization results revealed that the 0.15Co-SiOx possessed a high specific surface area of 607.95 m2/g with a uniform mesoporous structure (24.33 nm). The X-ray diffraction patterns indicate that the substituted cobalt atoms enlarge the unit cell parameter of the original SiO2, and the selected area electron diffraction pattern confirmed the amorphous nature of Co-SiOx. More bulk oxygen vacancies (Ov) existing in the Co-SiOx were identified to be one of the primary contributors to the significantly enhanced catalytic activation of PMS. The cobalt substitution both creates and stabilizes the surficial Ov and forms the adequately active Co(II)-Ov pairs which engine the electron transfer process during the catalytic activities. The active Co(II)-Ov pairs weaken the average electronegativity of Co/Si and Co/O sites, resulting in the prevalent changes in final state energy, which is the main driving cause of the binding energy shifts in the X-ray photoelectron spectroscopy (XPS) spectra of Si and O among all samples. The increase of the relative proportion of Co(III) in the spent Co-SiOx probably causes the binding energy shifts of the Co XPS spectrum compared to that of the Co-SiOx. The amorphous Co-SiOx outperforms stable and quick 2,4-DCP degradation, achieving a much higher kinetic rate of 0.7139 min-1 at pH = 7.02 than others via sulfate radical advanced oxidation processes (AOPs), photo-Fenton AOPs, H2O2 reagent AOPs, and other AOP approaches. The efficient degradation performance makes the amorphous Co-SiOx as a promising catalyst in removing 2,4-DCP or organic-rich pollutants.

Effect of Oxide Ion Distribution on a Uranium Structure in Highly U-Doped RE2Hf2O7 (RE = La and Gd) Nanoparticles.

Rare-earth based A2B2O7 compounds have been considered as potential host materials for nuclear waste due to their exceptional chemical, physical, capability of accommodating high concentration of actinides at both A- and B-sites, negligible leaching, tendency to form antisite defects, and radiation stabilities. In this work, La2Hf2O7 (LHO) and Gd2Hf2O7 (GHO) nanoparticles (NPs) were chosen as the RE-based hafnates to study the structural changes and the formation of different U molecular structures upon doping (or alloying) at high concentration (up to 30 mol %) using a combined coprecipitation and molten-salt synthesis. These compounds form similar crystal structures, i.e., ordered pyrochlore (LHO) and disordered fluorite (GHO), but are expected to show different phase transformations at high U doping concentration. X-ray diffraction (XRD) and Rietveld refinement results show that the LHO:U NPs have high structural stability, whereas the GHO:U NPs exhibit a highly disordered structure at high U concentration. Alternatively, the vibrational spectra show an increasingly random oxygen distribution with U doping, driving the LHO:U NPs to the disordered fluorite phase. X-ray spectroscopy indicates that U is stabilized as different U6+ species in both LHO and GHO hosts, resulting in the formation of oxygen vacancies stemming from the U local coordination and different phase transformation. Interestingly, the disordered fluorite phase has been reported to have increased radiation tolerance, suggesting multiple benefits associated with the LHO host. These results demonstrate the importance of the structural and chemical effect of actinide dopants on similar host matrices which are important for the development of RE-based hafnates for nuclear waste hosts, sensors, thermal barrier coatings, and scintillator applications.

Adsorption of Polarized Molecules for Interfacial Band Engineering of Doped TiO2 Thin Films.

Owing to their chemical and mechanical stability, metal-oxides have emerged as potential alternatives for conventional pure-metal and organic molecule-based solid-state electronic devices. Traditionally, band engineering of these metal-oxides has been performed to improve the efficiency of solar cells and transistors. However, recent advancements in the field of oxide-based electronic devices demand reversible band structure engineering for applications in next-generation adaptive electronics and memory devices. Therefore, this work aims to reversibly engineer the surface band structure of doped metal-oxides using stable organic ligands with weak dipoles. Para-substituted benzoic acid (BZA) ligands with positive and negative dipole moments were adsorbed in situ on the surface of TiO2:Ni2+ thin film to modify the interfacial dipole moment, and the valence band structure was probed using surface-sensitive ultraviolet photoelectron spectroscopy (UPS). UPS, paired with density functional theory (DFT) simulations, demonstrate the ability to selectively tune interfacial electronic/chemical landscapes with ligand-dependent dipole moment. The unique ability to reversibly tune the band bending at the organic-inorganic interface of doped metal-oxide semiconductors using molecular dipoles is expected to play a key role in the development of metal-oxide-based adaptive electronics that outperform the conventional polymer-based and Si-based devices.

A Noble-Transition Alloy Excels at Hot-Carrier Generation in the Near Infrared.

Above-equilibrium "hot"-carrier generation in metals is a promising route to convert photons into electrical charge for efficient near-infrared optoelectronics. However, metals that offer both hot-carrier generation in the near-infrared and sufficient carrier lifetimes remain elusive. Alloys can offer emergent properties and new design strategies compared to pure metals. Here, it is shown that a noble-transition alloy, Aux Pd1- x , outperforms its constituent metals concerning generation and lifetime of hot carriers when excited in the near-infrared. At optical fiber wavelengths (e.g., 1550 nm), Au50 Pd50 provides a 20-fold increase in the number of ≈0.8 eV hot holes, compared to Au, and a threefold increase in the carrier lifetime, compared to Pd. The discovery that noble-transition alloys can excel at hot-carrier generation reveals a new material platform for near-infrared optoelectronic devices.

Critical Coupling of Visible Light Extends Hot-Electron Lifetimes for H2O2 Synthesis.

Devices driven by above-equilibrium "hot" electrons are appealing for photocatalytic technologies, such as in situ H2O2 synthesis, but currently suffer from low (<1%) overall quantum efficiencies. Gold nanostructures excited by visible light generate hot electrons that can inject into a neighboring semiconductor to drive electrochemical reactions. Here, we designed and studied a metal-insulator-metal (MIM) structure of Au nanoparticles on a ZnO/TiO2/Al film stack, deposited through room-temperature, lithography-free methods. Light absorption, electron injection efficiency, and photocatalytic yield in this device are superior in comparison to the same stack without Al. Our device absorbs >60% of light at the Au localized surface plasmon resonance (LSPR) peak near 530 nm-a 5-fold enhancement in Au absorption due to critical coupling to an Al film. Furthermore, we show through ultrafast pump-probe spectroscopy that the Al-coupled samples exhibit a nearly 5-fold improvement in hot-electron injection efficiency as compared to a non-Al device, with the hot-electron lifetimes extending to >2 ps in devices photoexcited with fluence of 0.1 mJ cm-2. The use of an Al film also enhances the photocatalytic yield of H2O2 more than 3-fold in a visible-light-driven reactor. Altogether, we show that the critical coupling of Al films to Au nanoparticles is a low-cost, lithography-free method for improving visible-light capture, extending hot-carrier lifetimes, and ultimately increasing the rate of in situ H2O2 generation.

Synergetic effect on catalytic activity and charge transfer in Pt-Pd bimetallic model catalysts prepared by atomic layer deposition.

Pt-Pd bimetallic nanoparticles were synthesized on TiO2 support on the planar substrate as well as on high surface area SiO2 gel by atomic layer deposition to identify the catalytic performance improvement after the formation of Pt-Pd bimetallic nanoparticles by surface analysis techniques. From X-ray absorption near edge spectra of Pt-Pd bimetallic nanoparticles, d-orbital hybridization between Pt 5d and Pd 4d was observed, which is responsible for charge transfer from Pt to Pd. Moreover, it was found from the in situ grazing incidence X-ray absorption spectroscopy study that Pt-Pd nanoparticles have a Pd shell/Pt core structure with CO adsorption. Resonant photoemission spectroscopy on Pt-Pd bimetallic nanoparticles showed that Pd resonant intensity is enhanced compared to that of Pd monometallic nanoparticles because of d-orbital hybridization and electronic states broadening of Pt and Pd compared monometallic catalysts, which results in catalytic performance improvement.

Role of Ce in Manipulating the Photoluminescence of Tb Doped Y2Zr2O7.

Y2Zr2O7 (YZO) is widely used as a host material for luminescent centers because of its high stability and the ability to accommodate anion defects. In this work, the effects of Ce and Tb doping on the photoluminescence (PL) properties of YZO nanoparticles (NPs) are studied in detail to correlate the emission intensity with the dopant concentration. Herein, a two-step synthesis method of coprecipitation and molten salt was employed to prepare the YZO:Tb,Ce NPs. The single doped YZO:Tb (2 mol %) NPs shows a strong Tb3+ emission. However, after codoping with Ce ions, the Tb3+ emission is quenched instead of the expected sensitization. To identify the mechanism of quenching (oxidation state/local symmetry), X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) were performed. The Ce4+ ions were observed to drive further oxidation of Tb to a nonluminescent +4 oxidation state. Alternatively, Eu3+ was employed to probe local symmetry changes upon Ce doping. The asymmetry ratio of the magnetic and electronic transitions indicates that the Ce dopant also pushes the system into a higher symmetry, resulting in two separate quenching mechanisms.

3D Macroporous Zinc Compound/Silicone Hybrid Foams for Amperometric Sensing of Glucose Oxidase.

A 3D porous matrix makes an intriguing sensing platform, which can integrate functional guest molecules. Here, the first demonstration of a zinc compound/silicone hybrid foam is reported for amperometric sensing of glucose oxidase. The silicone foam is fabricated by a self-developed solid-filling-melting method. Two zinc-based polymers, Zn-Compound-1 and Zn-Compound-2, are synthesized. Zn-Compound-1 and Zn-Compound-2 are characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, and X-ray absorption nearedge structure spectroscopy of carbon K-edge, oxygen K-edge, and zinc L-edge. Effective amperometric sensing of glucose oxidase is achieved by introducing Zn-Compound-1 or Zn-Compound-2 into the silicone foam, i.e., an increase of the concentration of the glucose oxidase led to an increase of detected current. This phenomenon can be explained by a possible mechanism of the formation of electron extra bands.

Toward a Rapid-Fabricated Triboelectric Device with a 1,3-Phosphorylated Poly(vinyl alcohol) Polymer for Water Turbulence Energy Harvesting.

Electricity generation from coal, nuclear reaction, and shale gas has brought environmental, safety, and health concerns. The electricity industry is constantly seeking sustainable, safe, and healthy way of electricity generation. The use of triboelectric device is promising for producing electricity from water energy. In this study, we report on the rapid fabrication of a 1,3-phosphorylated poly(vinyl alcohol) gel-based triboelectric device and direct harvesting of water turbulence energy using this device. The gel was prepared by the reaction of poly(vinyl alcohol) with dipotassium phosphate. The synthesized gel was characterized by mass spectroscopy, thermogravimetric analysis/difference thermogravimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscope, Raman, and carbon and oxygen K-edges soft X-ray absorption near edge structure spectroscopy. The triboelectric device was used to harvest electricity from water turbulence.

Probing environmentally significant surface radicals: Crystallographic and temperature dependent adsorption of phenol on ZnO.

Environmentally persistent free radicals (EPFRs) are toxic organic/metal oxide composite particles that have been discovered to form from substituted benzenes chemisorbed to metal oxides. Here, we perform photoelectron spectroscopy, electron energy loss spectroscopy, and low energy electron diffraction of phenol chemisorbed to ZnO(1 0 1̱ 0) and (0 0 0 1̱)-Zn to observe electronic structure changes and charge transfer as a function adsorption temperature. We show direct evidence of charge transfer from the ZnO surfaces to the phenol. This evidence can help gain a better understanding of EPFRs and be used to develop possible future remediation strategies.