RESUMO
Light-mediated reactions have emerged as an indispensable tool in organic synthesis and drug discovery, enabling novel transformations and providing access to previously unexplored chemical space. Despite their widespread application in both academic and industrial research, the utilization of light as an energy source still encounters challenges regarding reproducibility and data robustness. Herein we present a comprehensive head-to-head comparison of commercially available batch photoreactors, alongside the introduction of the use of batch and flow photoreactors in parallel synthesis. Hence, we aim to establish a reliable and consistent platform for light-mediated reactions in high-throughput mode. Herein, we showcase the identification of several platforms aligning with the rigorous demands for efficient and robust high-throughput experimentation screenings and library synthesis.
RESUMO
(Z)-alkenes are useful synthons but thermodynamically less stable than their (E)-isomers and typically more difficult to prepare. The synthesis of 1,4-hetero-bifunctionalized (Z)-alkenes is particularly challenging due to the inherent regio- and stereoselectivity issues. Herein we demonstrate a general, chemoselective and direct synthesis of (Z)-2-butene-1,4-diol monoesters. The protocol operates within a Pd-catalyzed decarboxylative acyloxylation regime involving vinyl ethylene carbonates (VECs) and various carboxylic acids as the reaction partners under mild and operationally attractive conditions. The newly developed process allows access to a structurally diverse pool of (Z)-2-butene-1,4-diol monoesters in good yields and with excellent regio- and stereoselectivity. Various synthetic transformations of the obtained (Z)-2-butene-1,4-diol monoesters demonstrate how these synthons are of great use to rapidly diversify the portfolio of these formal desymmetrized (Z)-alkenes.
RESUMO
We report a user-friendly approach for the decarboxylative formation of stereodefined and complex tri- and tetra-substituted olefins from vinyl cyclic carbonates and amines as radical precursors. The protocol relies on easy photo-initiated α-amino-radical formation followed by addition onto the double bond of the substrate resulting in a sequence involving carbonate ring-opening, double bond relay, CO2 extrusion and finally O-protonation. The developed protocol is efficient for both mismatched and matched polarity substrate combinations, and the scope of elaborate stereodefined olefins that can be forged including drug-functionalized derivatives is wide, diverse and further extendable to other types of heterocyclic and radical precursors. Mechanistic control reactions show that the decarboxylation step is a key driving force towards product formation, with the initial radical addition under steric control.
RESUMO
ConspectusBiologically active compounds and pharmaceutically relevant intermediates often feature sterically congested stereogenic centers, in particular, carbon stereocenters that are either tertiary tetrasubstituted ones or quaternary in nature. Synthons that comprise such bulky and often structurally complex core units are of high synthetic value and represent important incentives for communities connected to drug discovery and development. Streamlined approaches that give access to a diverse set of compounds incorporating acyclic bulky stereocenters are relatively limited, though vital. They enable further exploration of three-dimensional entities that can be designed and implemented in discovery programs, thereby extending the pool of molecular properties that is inaccessible for flat molecules. However, the lack of modular substrates in particular areas of chemical space inspired us to consider functionalized heterocycles known as cyclic carbonates and carbamates as a productive way to create sterically crowded alkenes and stereocenters.In this Account, we describe the major approximations we followed over the course of 8 years using transition metal (TM) catalysis as an instrument to control the stereochemical course of various allylic and propargylic substitution processes and related transformations. Allylic substitution reactions empowered by Pd-catalysis utilizing a variety of nucleophiles are discussed, with amination being the seed of all of this combined work. These procedures build on vinyl-substituted cyclic carbonates (VCCs) that are simple and easy-to-access precursors and highly modular in nature compared to synthetically limited vinyl oxiranes. Overall these decarboxylative conversions take place with either "linear" or "branched" regioselectivities that are ligand controlled and offer access to a wide scope of functional allylic scaffolds. Alternative approaches, including dual TM/photocatalyzed transformations, allowed us to expand the repertoire of challenging stereoselective conversions. This was achieved through key single-electron pathways and via formal umpolung of intermediates, resulting in new types of carbon-carbon bond formation reactions significantly expanding the scope of allylic substitution reactions.Heterocyclic substrate variants that have triple bond functional groups were also designed by us to enable difficult-to-promote stereoselective propargylic substitution reactions through TM catalysis. In these processes, inspired by the Nishibayashi laboratory and their seminal findings in the area, we discovered various new reactivity patterns. This provided access to a range of different stereodefined building blocks such as 1,2-diborylated 1,3-dienes and tetrasubstituted α-allenols under Cu- or Ni-catalysis. In this realm, the use of lactone-derived substrates gives access to elusive chiral γ-amino acids and lactams with high stereofidelity and good structural diversity.Apart from the synthetic efforts, we have elucidated some of the pertinent mechanistic manifolds operative in these transformations to better understand the limitations and opportunities with these specifically functionalized heterocycles that allowed us to create complex synthons. We combined both theoretical and experimental investigations that lead to several unexpected outcomes in terms of enantioinduction models, catalyst preactivation, and intermediates that are intimately connected to rationales for the observed selectivity profiles. The combined work we have communicated over the years offers insight into the unique reactivity of cyclic carbonates/carbamates acting as privileged precursors. It may inspire other members of the synthetic communities to widen the scope of precursors toward novel stereoselective transformations with added value in drug discovery and development in both academic and commercial settings.
RESUMO
A catalytic domino, three-component reaction has been developed for the transformation of carbon dioxide into functionalized six-membered cyclic carbonates. The catalytic process combines an initial carboxylative cyclization of ß-epoxy alcohols followed by an oxa-Michael reaction affording an unparalleled scope of heterocyclic structures. The wide range of functional groups, including free-alcohols, empowers the access to a range of products including C11-oxo-based bicyclic heterocycles. The versatility of these functionalized carbonates is further complemented by a series of synthetic diversifications. Control experiments are consistent with the first step of this domino process being promoted by a binary Lewis acid/base catalyst, while the second stage only requires catalytic base.
RESUMO
We here report the organocatalytic and temperature-controlled depolymerization of biobased poly(limonene carbonate) providing access to its trans-configured cyclic carbonate as the major product. The base TBD (1,5,7-triazabicyclo[4.4.0]dec-5-ene) offers a unique opportunity to break down polycarbonates via end-group activation or main chain scission pathways as supported by various controls and computational analysis. These energetically competitive processes represent an unprecedented divergent approach to polycarbonate recycling. The trans limonene carbonate can be converted back to its polycarbonate via ring-opening polymerization using the same organocatalyst in the presence of an alcohol initiator, offering thus a potential circular and practical route for polycarbonate recycling.
RESUMO
Asymmetric synthesis of small molecules comprising quaternary stereogenic carbon centers represents a challenging objective. Here regio- and enantioselective synthesis of chiral 1,5-dienes featuring quaternary stereocenters is reported via nickel-promoted by reductive homoallylic coupling. The developed methodology features an atypical preference for the formation of unusual branched regioisomers (rr >20 : 1) in a sterically challenging allylic substitution event and furnishes the products with enantiomeric ratios of up to 98 : 2 and with high chemo- and E-selectivity. A range of experimental evidences suggest that zinc plays a dual role to generate electrophilic and nucleophilic Ni(II)-allyl intermediates empowering a unique formal bimetallic cross-electrophile manifold in two separate kinetic regimes.
RESUMO
A commercially available Lipase B from Candida antarctica immobilized onto a macroporous support (Novozym 435) has been employed in the presence of H2O2 as a benign oxidant for the epoxidation of various biorenewable terpenes. This epoxidation protocol was explored under both heterogeneous batch and continuous flow conditions. The catalyst recyclability was also investigated demonstrating good activity throughout 10 cycles under batch conditions, while the same catalyst system could also be productively used under continuous flow operation for more than 30 h. This practical and relatively safe sustainable flow epoxidation of di- and trisubstituted alkenes by H2O2 allows for the production of gram quantities of a range of terpene epoxides. As a proof of principle, the same protocol can also be applied to the epoxidation of biobased polymers as a means to post-functionalize these macromolecules and equip them with cross-linkable epoxy groups.
RESUMO
Metal-catalyzed propargylic transformations represent a powerful tool in organic synthesis to achieve new carbon-carbon and carbon-heteroatom bonds. However, detailed knowledge about the mechanistic intricacies related to the asymmetric formation of propargylic products featuring challenging heteroatom-substituted tertiary stereocenters is scarce and therefore provides an inspiring challenge. Here, we present a meticulous mechanistic analysis of a propargylic sulfonylation reaction promoted by a chiral Cu catalyst through a combination of experimental techniques and computational studies. Surprisingly, the enantio-discriminating step is not the coupling between the nucleophile and the propargylic precursor but rather the following proto-demetalation step, a scenario further validated by computing enantio-induction levels under other previously reported experimental conditions. A full mechanistic scenario for this propargylic substitution reaction is provided, including a catalyst pre-activation stage, a productive catalytic cycle, and an unanticipated non-linear effect at the Cu(I) oxidation level.
RESUMO
A conceptually novel catalytic domino approach is presented for the synthesis of highly functional 1,4-dihydro-2H-1,3-benzoxazine-2-one derivatives. Key to the chemoselectivity is a proper design of the precursor to override thermodynamically favored parasitic cyclization processes and empower the formation of the desired product through Thorpe-Ingold effects. The synthetic diversity of these CO2 -based heterocycles is further demonstrated, and the isolation of a reaction intermediate supports an unusual ring-expansion sequence from an α-alkylidene, five-membered cyclic carbonate to a six-membered cyclic carbamate by N-induced isomerization.
RESUMO
The introduction of circular principles in chemical manufacturing will drastically change the way everyday plastics are produced, thereby affecting several aspects of the respective value chains in terms of raw feedstock, recyclability, and cost. The ultimate aim is to ensure a paradigm shift toward plastic-based (consumer) materials that overall can offer a more attractive and sustainable carbon footprint, which is an important requisite from a societal, political, and eventually economical point of view. To realize this important milestone, it is vitally important to control the polymerization processes associated with the creation of novel sustainable materials. In this respect, we realized that expanding the portfolio of biomass-derived monomers may indeed create an impetus for atom circularity; however, the often sterically congested nature of biomass-derived monomers minimizes the ability of previously developed catalysts to activate and transform these precursors. Our motivation was thus spurred by an apparent lack of catalysts suitable for addressing the conversion of such biomonomers, as we realized the potential that new catalytic processes could have to advance and contribute to the development of sustainable materials produced from polycarbonates and polyesters. These two classes of polymers represent crucial ingredients of important and large-scale consumer products and are therefore ideal fits for implementing new catalytic protocols that enable a gradual transition to plastic materials with an improved carbon footprint.When we started our research expedition, the field was dominated by metal catalysts that incorporated preferred, and in some cases even privileged, ligand backbones (such as salens) able to mediate both ring-opening and ring-opening copolymerization manifolds. One major drawback of these aforementioned catalysts is their rather rigid nature, a feature that reduces their ability to act as adaptive systems, especially in cases where bulky monomers are involved. While our initial focus was on the utilization of sustainable metal salen complexes (M = Zn, Fe) for the activation of small cyclic ethers, which are privileged monomers for polyester and polycarbonate production, we were rapidly confronted with severe limitations related to their inability to activate a wider range of complex epoxides and oxetanes, which was imparted by the planar coordination geometry of the salen ligand in most of its applied metal complexes. In our quest to find a catalytically more effective metal complex with the ability to electronically and sterically tune its substrate-binding and substrate-activation potential, we identified aminotriphenolates as structurally versatile, easily accessible, and scalable ligands for various earth-abundant metal cations. Moreover, the ligand backbone allows for switchable coordination environments around the metal centers, thus offering the necessary adaptation in substrate activation events.This Account describes how Al(III)- and Fe(III)-centered aminotriphenolates have conquered a prominent position as catalyst components in the synthesis of new biobased polyester and polycarbonate architectures, thereby changing the landscape of previously difficult to convert biomonomers, and expanding the chemical space of biobased functional polymers. With the ever-increasing influence of legislation and the restrictions placed on the use of fossil-fuel-based feedstock, the polymer industry needs viable alternatives to design materials that are greener, cost-effective, and allow for the exploration and optimization of their recycling and properties.
Assuntos
Complexos de Coordenação , Poliésteres , Biomassa , Compostos Férricos , Ligantes , Metais , Plásticos , Cimento de Policarboxilato , Polímeros/químicaRESUMO
Glycerol carbonate (GC) has emerged as an attractive synthetic target due to various promising technological applications. Among several viable strategies to produce GC from CO2 and glycerol and its derivatives, the cycloaddition of CO2 to glycidol represents an atom-economic an efficient strategy that can proceed via a halide-free manifold through a proton-shuttling mechanism. Here, it was shown that the synthesis of GC can be promoted by bio-based and readily available organic salts leading to quantitative GC formation under atmospheric CO2 pressure and moderate temperatures. Comparative and mechanistic experiments using sodium citrate as the most efficient catalyst highlighted the role of both hydrogen bond donor and weakly basic sites in the organic salt towards GC formation. The citrate salt was also used as a catalyst for the conversion of other epoxy alcohols. Importantly, the discovery that homogeneous organic salts catalyze the target reaction inspired us to use metal alginates as heterogeneous and recoverable bio-based catalysts for the same process.
Assuntos
Dióxido de Carbono , Glicerol , Dióxido de Carbono/química , Carbonatos/química , Compostos de Epóxi , Halogênios , Propanóis , SaisRESUMO
Metallaphotoredox chemistry has recently witnessed a surge in interest within the field of synthetic organic chemistry through the use of abundant first-row transition metals combined with suitable photocatalysts. The intricate details arising from the combination of two (or more) catalytic components during the reaction and especially the inter-catalyst interactions remain poorly understood. As a representative example of a catalytic process featuring such intricacies, we here present a meticulous study of the mechanism of a cobalt-organophotoredox catalyzed allylation of aldehydes. Importantly, the commonly proposed elementary steps in reductive metallaphotoredox chemistry are more complex than previously assumed. After initial reductive quenching, a transient charge-transfer complex forms that interacts with both the transition-metal catalyst and the catalytic base. Surprisingly, the former interaction leads to deactivation due to induced charge recombination, while the latter promotes deprotonation of the electron donor, which is the crucial step to initiate productive catalysis but is often neglected. Due to the low efficiency of this latter process, the overall catalytic reaction is photon-limited and the cobalt catalyst remains in a dual resting state, awaiting photoinduced reduction. These new insights are of general importance to the synthetic community, as metallaphotoredox chemistry has become a powerful tool used in the formation of elusive compounds through carbon-carbon bond formations. Understanding the underlying aspects that determine the efficiency of such reactions provides a conceptually stronger reactivity paradigm to empower future approaches to synthetic challenges that rely on dual metallaphotoredox catalysis.
Assuntos
Aldeídos , Carbono , Aldeídos/química , Carbono/química , Catálise , CobaltoRESUMO
Conversion of ß-elemene into new ß-elemene dicarbonates through epoxidation and halide salt-catalyzed CO2 cycloaddition reactions is reported. Step-growth polyaddition of this dicarbonate to five different, commercial diamines was investigated under neat conditions at 150 °C yielding non-isocyanate-based low molecular weight oligo(hydroxyurethane)s with 1.3≤Mn ≤6.3â kDa and 1.3≤Ð≤2.1, and with glass transition temperatures ranging from -59 to 84 °C. The preparation of one selected polyhydroxyurethane material, obtained in the presence of Jeffamine® D-2010 was scaled-up to 43â g. The latter, when combined in a formulation using Irgacure® 2100 and Laromer® LR 9000 allowed the preparation of coatings that were analyzed with several techniques showing the potential of these biobased oligourethanes towards the preparation of commercially relevant materials.
Assuntos
Dióxido de Carbono , Sesquiterpenos , Carbonatos , Reação de CicloadiçãoRESUMO
Fatty acid epoxies serve as valuable starting materials for the development of bio-based polyesters. Here we present a new and efficient catalytic process that allows for the copolymerization of fatty acid-based epoxides and various cyclic anhydrides under attractive process conditions affording functional polyesters. The degree of functionalization and the nature of the polymer backbone can be modulated via monomer design. Postpolymerization cross-linking processes were examined to create rigid macromolecular networks that build on orthogonal polyester functionality, creating possible entries for materials with switchable thermal and mechanical properties.
RESUMO
A new catalytic route has been developed for the coupling of epoxides and CO2 affording polymerizable six-membered bicyclic carbonates. Cyclic epoxides equipped with a ß-positioned OH group can be transformed into structurally diverse bicyclic cyclic carbonates in good yields and with high selectivity. Key to the chemo-selectivity is the difference between the reactivity of syn- and anti-configured epoxy alcohols, with the latter leading to six-membered ring carbonate formation in the presence of a binary AlIII aminotriphenolate complex/DIPEA catalyst. X-ray analyses show that the conversion of the syn-configured substrate evolves via a standard double inversion pathway providing a five-membered carbonate product, whereas the anti-isomer allows for activation of the oxirane unit of the substrate opposite to the pendent alcohol. The potential use of these bicyclic products is shown in ring-opening polymerization offering access to rigid polycarbonates with improved thermal resistance.
RESUMO
In the area of coating development, it is extremely difficult to find a substitute for bisphenol A diglycidyl ether (DGEBA), the classical petroleum-based raw material used for the formulation of epoxy thermosets. This epoxy resin offers fast curing reaction with several hardeners and the best thermal and chemical resistance properties for applications in coatings and adhesive technologies. In this work, a new biobased epoxy, derived from poly(limonene carbonate) oxide (PLCO), was combined with polyetheramine and polyamineamide curing agents, offering a spectrum of thermal and mechanical properties, superior to DGEBA-based thermosets. The best formulation was found to be a combination of PLCO and a commercial curing agent (Jeffamine) in a stoichiometric 1:1 ratio. Although PLCO is a solid due to its high molecular weight, it was possible to create a two-component partially biobased epoxy paint without the need of volatile organic compounds (i.e., solvent-free formulation), intended for use in coating technology to partially replace DGEBA-based thermosets.
RESUMO
Biobased epoxy-derived raw materials will be essential for future coating and adhesive designs in industry. Here, a facile approach is reported towards the incorporation of limonene into an epoxy-functionalized polycarbonate and its crosslinking with a polyamine curing agent to obtain a thermoset material. For the first time, a solvent-borne adhesive with excellent film-forming, mechanical and adhesion strength properties is described.
Assuntos
Adesivos , Resinas Epóxi , Plásticos , SolventesRESUMO
A Ni-mediated decarboxylative silylation of alkynyl cyclic carbonates used as versatile propargylic surrogates is reported affording a wide range of highly substituted 2,3- and 3,4-allenol products in good yields. The formal cross-coupling between a tentative intermediate Ni(allenyl) and the silyl reagent was further extended to enantiospecific conversions providing access to chiral allene synthons. This protocol marks the first Ni-catalyzed propargylic silylation proceeding through an SN2' manifold.
RESUMO
Dual palladium/photoredox-catalysis provides an effective method for the decarboxylative asymmetric synthesis of vicinal α,ß-tri/tetra- or α,ß-tetrasubstituted homoallylic alcohols using Hantzsch-type esters as radical precursors. This mild methodology capitalizes on vinyl cyclic carbonates as accessible reagents providing the target molecules in appreciable to good yields, high branch selectivity, and enantiomeric ratios of up to 94:6, making it a rare example of using prochiral electrophiles for the creation of vicinal congested carbon centers.