Redefine photoprotection: Sun protection beyond sunburn.

Excessive exposure to ultraviolet (UV) light leads to acute and chronic UV damage and is the main risk factor for the development of skin cancer. In most countries with western lifestyle, the topical application of sunscreens on UV-exposed skin areas is by far the most frequently used preventive measure against sunburn. Further than preventing sunburns, increasing numbers of consumers are appreciating sunscreens with a medium- to high-level sun protective factor (SPF) as basis for sustainable-skin ageing or skin cancer prevention programs. However, recent investigations indicate that clinically significant DNA damages as well as a lasting impairment of cutaneous immunosurveillance already occur far below the standard of one minimal erythema dose (MED) sunburn level, which contributes to the current discussion of the clinical value of high-protective SPF values. Ex vivo investigations on human skin showed that the application of SPF30 reduces DNA damage for a day long sun exposure (24 MED) drastically by about 53% but is significantly surpassed by SPF100 reducing DNA damage by approx. 73%. Further analysis on different SPF protection levels in UV-exposed cell culture assays focusing on IL-18, cell vitality and cis/trans-urocanic acid support these findings. Whereas SPF30 and SPF50+ sunscreens already offer a solid UVB cover for most indications, our results indicate that SPF100 provides significant additional protection against mutagenic (non-apoptotic-) DNA damage and functional impairment of the cutaneous immunosurveillance and therefore qualifies as an optimized sunscreen for specifically vulnerable patient groups such as immunosuppressed patients, or skin cancer patients.

Skin optical properties from 200 to 300 nm support far UV-C skin-safety in vivo.

The growing threat of multi-drug resistant pathogens and airborne microbial diseases has highlighted the need to improve or develop novel disinfection methods for clinical environments. Conventional ultraviolet C (UV-C) lamps effectively inactivate microorganisms but are harmful to human skin and eyes upon exposure. The use of new 233 nm far UV-C LEDs as an antiseptic can overcome those limitations. In this research, the light penetration into the skin was elucidated for the UV-C region (<300 nm) by measuring the scattering and absorption of skin layers and inverse Monte Carlo simulation, and further confirmed by the first clinical pilot trial in which healthy volunteers were irradiated with a dose of 60 mJ/cm2 at 233 nm. The radiation is strongly absorbed in the stratum corneum, resulting in minimal skin damage without inducing inflammatory responses. The results suggest that 233 nm far UV-C light emitting diodes (LEDs) could effectively inactivate microorganisms, while being safe and soft for the skin.

Cell wall composition and biomass saccharification potential of Sida hermaphrodita differ between genetically distant accessions.

Due to its ample production of lignocellulosic biomass, Sida hermaphrodita (Sida), a perennial forb, is considered a valuable raw material for biorefinery processes. The recalcitrant nature of Sida lignocellulosic biomass towards pretreatment and fractionation processes has previously been studied. However, Sida is a non-domesticated species and here we aimed at expanding the potential of such plants in terms of their processability for downstream processes by making use of the natural variety of Sida. To achieve this goal, we established a collection comprising 16 different Sida accessions obtained from North America and Europe. First, we asked whether their cell wall characteristics are reflected in genetic distance or geographical distribution, respectively. A genotyping-by-sequencing (GBS) analysis resulting in a phylogenic tree based on 751 Single Nucleotide Polymorphisms (SNPs), revealed a high genetic diversity and a clear separation between accessions collected in North America and Europe. Further, all three North American accessions were separated from each other. Of the eleven European accessions, five form individual groups and six others belong to a single group. Clonal plants of seven selected accessions of American and European origin were produced and cultivated under greenhouse conditions and the resulting plant material was used for in-depth wet-chemical and spectroscopic cell wall characterization. Two accessions with contrasting cell wall characteristics were then selected and processed using the OrganoCat technology. Results of the different product yields and chemical compositions are reported. Overall, cell wall analyses revealed contrasting clusters regarding these main components between the accessions that can be related to genetic and, partly, geographical distance. Phenotypically, the accessions clustered into two groups that are not entirely overlapping with geographical origin. These results can be the basis for a targeted selection or cultivation of Sida accessions for biorefinery approaches.

Sugarcane bagasse ash as fertilizer for soybeans: Effects of added residues on ash composition, mineralogy, phosphorus extractability and plant availability.

Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K2SO4, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.

Optimizing nutrient removal and biomass production of the Algal Turf Scrubber (ATS) under variable cultivation conditions by using Response Surface Methodology.

This study investigated and optimized the nutrient remediation efficiency of a simple low-cost algal biofilm reactor, the algal turf scrubber (ATS), for wastewater treatment. Combined effects of three cultivation variables-total inorganic carbon, nitrogen-to-phosphorous (N:P) ratio, and light intensity-were examined. The ATS nutrient removal efficiency and biomass productivity were analyzed considering the response surface methodology (RSM). The maximum removal rates of total P and N were 8.3 and 19.1 mg L-1 d-1, respectively. As much as 99% of total P and 100% of total N were removed within 7 days. Over the same period, the dissolved oxygen concentration and pH value of the medium increased. The optimal growth conditions for simultaneous maximum P and N removal and biomass productivity were identified. Our RSM-based optimization results provide new insights into the combined effect of nutrient and light availability on the ATS remediation efficiency and biomass productivity.

AlgalTextile - a new biohybrid material for wastewater treatment.

Efficient nutrient extraction from wastewater and reuse as bio-fertilizer is an important task for reducing anthropogenic load toward circular economy. Inspired by microbial mats and biofilms, we developed a new material AlgalTextile (AT) that effectively absorbs nutrients from a medium. AT consists of three fully organic components: microalgae, alginate and textile. AT sequestered up to 99% of phosphorus (P-PO4) and 76% of total bound nitrogen from a medium. The uptake rate of phosphorus and nitrogen by AT was highest among all methods using photosynthetic microorganisms, but lower than EBPR and physicochemical methods for phosphorus removal, and anammox and denitrifying bacteria for nitrogen removal. Advantages of AT are its easy production, possibility of seasonal use and utilization as fertilizer. AT as biofertilizer for cress resulted in 35% greater length compared to the control. This outlines a promising technique for seasonal wastewater treatment, improving soil fertility and treatment of polluted surface runoff.

Insights into cell wall disintegration of Chlorella vulgaris.

With their ability of CO2 fixation using sunlight as an energy source, algae and especially microalgae are moving into the focus for the production of proteins and other valuable compounds. However, the valorization of algal biomass depends on the effective disruption of the recalcitrant microalgal cell wall. Especially cell walls of Chlorella species proved to be very robust. The wall structures that are responsible for this robustness have been studied less so far. Here, we evaluate different common methods to break up the algal cell wall effectively and measure the success by protein and carbohydrate release. Subsequently, we investigate algal cell wall features playing a role in the wall's recalcitrance towards disruption. Using different mechanical and chemical technologies, alkali catalyzed hydrolysis of the Chlorella vulgaris cells proved to be especially effective in solubilizing up to 56 wt% protein and 14 wt% carbohydrates of the total biomass. The stepwise degradation of C. vulgaris cell walls using a series of chemicals with increasingly strong conditions revealed that each fraction released different ratios of proteins and carbohydrates. A detailed analysis of the monosaccharide composition of the cell wall extracted in each step identified possible factors for the robustness of the cell wall. In particular, the presence of chitin or chitin-like polymers was indicated by glucosamine found in strong alkali extracts. The presence of highly ordered starch or cellulose was indicated by glucose detected in strong acidic extracts. Our results might help to tailor more specific efforts to disrupt Chlorella cell walls and help to valorize microalgae biomass.

Fractionation of Lignocellulosic Biomass using the OrganoCat Process.

The shift from a petroleum-based to a more sustainable and bio-based economy requires the development of new refinery concepts to maintain the supply of raw materials and energy. For these novel and sustainable biorefinery concepts, it is important to use catalysts and solvents that are aligned with the principles of Green Chemistry. Therefore, the implementation of biogenic alternatives can be a promising solution. The lignocellulose pretreatment and fractionation process presented herein-OrganoCat-is an integrated fractionation of lignocellulose into its main components using biogenic acids such as 2,5-furandicarboxylic acid as catalyst. Hemicelluloses and other non-cellulosic polysaccharides are selectively depolymerized by the diluted acid and dissolved, while the crystalline cellulose remains in the solid pulp. In the presence of a second organic phase consisting of biogenic 2-methyltetrahydrofuran, disentangled lignin is extracted in situ. The process allows for the efficient fractionation of the three main components-lignin, cellulose, and non-cellulosic sugars. This helps to focus on the quality of the lignin, the improvement of enzymatic hydrolysis of the cellulose-enriched pulp, and the mild non-cellulosic sugar extraction with low degradation.

Lignocellulose Fractionation Using Recyclable Phosphoric Acid: Lignin, Cellulose, and Furfural Production.

The conversion of lignocellulose into its building blocks and their further transformation into valuable platform chemicals (e. g., furfural) are key technologies to move towards the use of renewable resources. This paper explored the disentanglement of lignocellulose into hemicellulose-derived sugars, cellulose, and lignin in a biphasic solvent system (water/2-methyltetrahydrofuran) using phosphoric acid as recyclable catalyst. Integrated with the biomass fractionation, in a second step hemicellulose-derived sugars (mainly xylose) were converted to furfural, which was in situ extracted into 2-methyltetrahydrofuran with high selectivity (70 %) and yield (56 wt %). To further increase the economic feasibility of the process, a downstream and recycling strategy enabled recovery of phosphoric acid without loss of process efficiency over four consecutive cycles. This outlines a more efficient and sustainable use of phosphoric acid as catalyst, as its inherent costs can be significantly lowered.

Multiscale analysis of lignocellulose recalcitrance towards OrganoCat pretreatment and fractionation.

BACKGROUND: Biomass recalcitrance towards pretreatment and further processing can be related to the compositional and structural features of the biomass. However, the exact role and relative importance to those structural attributes has still to be further evaluated. Herein, ten different types of biomass currently considered to be important raw materials for biorefineries were chosen to be processed by the recently developed, acid-catalyzed OrganoCat pretreatment to produce cellulose-enriched pulp, sugars, and lignin with different amounts and qualities. Using wet chemistry analysis and NMR spectroscopy, the generic factors of lignocellulose recalcitrance towards OrganoCat were determined. RESULTS: The different materials were processed applying different conditions (e.g., type of acid catalyst and temperature), and fractions with different qualities were obtained. Raw materials and products were characterized in terms of their compositional and structural features. For the first time, generic correlation coefficients were calculated between the measured chemical and structural features and the different OrganoCat product yields and qualities. Especially lignin-related factors displayed a detrimental role for enzymatic pulp hydrolysis, as well as sugar and lignin yield exhibiting inverse correlation coefficients. Hemicellulose appeared to have less impact, not being as detrimental as lignin factors, but xylan-O-acetylation was inversely correlated with product yield and qualities. CONCLUSION: These results illustrate the role of generic features of lignocellulosic recalcitrance towards acidic pretreatments and fractionation, exemplified in the OrganoCat strategy. Discriminating between types of lignocellulosic biomass and highlighting important compositional variables, the improved understanding of how these parameters affect OrganoCat products will ameliorate bioeconomic concepts from agricultural production to chemical products. Herein, a methodological approach is proposed.

Lignin Precipitation and Fractionation from OrganoCat Pulping to Obtain Lignin with Different Sizes and Chemical Composition.

Fractionation of lignocellulose into its three main components, lignin, hemicelluloses, and cellulose, is a common approach in modern biorefinery concepts. Whereas the valorization of hemicelluloses and cellulose sugars has been widely discussed in literature, lignin utilization is still challenging. Due to its high heterogeneity and complexity, as well as impurities from pulping, it is a challenging feedstock. However, being the most abundant source of renewable aromatics, it remains a promising resource. This work describes a fractionation procedure that aims at stepwise precipitating beech wood (Fagus sp.) lignin obtained with OrganoCat technology from a 2-methyltetrahydrofuran solution, using n-hexane and n-pentane as antisolvents. By consecutive antisolvent precipitation and filtration, lignin is fractionated and then characterized to elucidate the structure of the different fractions. This way, more defined and purified lignin fractions can be obtained. Narrowing down the complexity of lignin and separately valorizing the fractions might further increase the economic viability of biorefineries.

Biomass composition explains fruit relative growth rate and discriminates climacteric from non-climacteric species.

Fleshy fruits are very varied, whether in terms of their composition, physiology, or rate and duration of growth. To understand the mechanisms that link metabolism to phenotypes, which would help the targeting of breeding strategies, we compared eight fleshy fruit species during development and ripening. Three herbaceous (eggplant, pepper, and cucumber), three tree (apple, peach, and clementine) and two vine (kiwifruit and grape) species were selected for their diversity. Fruit fresh weight and biomass composition, including the major soluble and insoluble components, were determined throughout fruit development and ripening. Best-fitting models of fruit weight were used to estimate relative growth rate (RGR), which was significantly correlated with several biomass components, especially protein content (R=84), stearate (R=0.72), palmitate (R=0.72), and lignocerate (R=0.68). The strong link between biomass composition and RGR was further evidenced by generalized linear models that predicted RGR with R-values exceeding 0.9. Comparison of the fruit also showed that climacteric fruit (apple, peach, kiwifruit) contained more non-cellulosic cell-wall glucose and fucose, and more starch, than non-climacteric fruit. The rate of starch net accumulation was also higher in climacteric fruit. These results suggest that the way biomass is constructed has a major influence on performance, especially growth rate.

OrganoCat Fractionation of Empty Fruit Bunches from Palm Trees into Lignin, Sugars, and Cellulose-Enriched Pulp.

The palm oil industry produces large amounts of empty fruit bunches (EFB) as waste. EFB are very recalcitrant toward further processing, although their valorization could create novel incentives and bio-economic opportunities for the industries involved. Herein, EFB have been successfully subjected to the OrganoCat pretreatment-using 2,5-furandicarboxylic acid as the biogenic catalyst-to fractionate and separate this lignocellulosic material into its main components in a single step. The pretreatment of EFB leads to the deacetylation and depolymerization of noncellulosic polysaccharides and to the partial delignification of the cellulosic fiber. The OrganoCat processing of EFB yielded 45 ± 0.5 wt % cellulose-enriched pulp, 20 ± 0.7 wt % extracted lignin, 3.8 ± 0.2 wt % furfural, and 11 ± 0.6 wt % hydrolyzed sugars. The obtained EFB-pulp showed high accessibility to cellulases, resulting in a glucan conversion of 73 ± 2% after 72 h (15 ± 2% after 1 h) with commercial cellulase cocktail (Accellerase 1500). Overall, the results suggest that the treatment of the EFB material using OrganoCat may create promising paths for the full valorization of EFBs.

TRM4 is essential for cellulose deposition in Arabidopsis seed mucilage by maintaining cortical microtubule organization and interacting with CESA3.

The differentiation of the seed coat epidermal (SCE) cells in Arabidopsis thaliana leads to the production of a large amount of pectin-rich mucilage and a thick cellulosic secondary cell wall. The mechanisms by which cortical microtubules are involved in the formation of these pectinaceous and cellulosic cell walls are still largely unknown. Using a reverse genetic approach, we found that TONNEAU1 (TON1) recruiting motif 4 (TRM4) is implicated in cortical microtubule organization in SCE cells, and functions as a novel player in the establishment of mucilage structure. TRM4 is preferentially accumulated in the SCE cells at the stage of mucilage biosynthesis. The loss of TRM4 results in compact seed mucilage capsules, aberrant mucilage cellulosic structure, short cellulosic rays and disorganized cellulose microfibrils in mucilage. The defects could be rescued by transgene complementation of trm4 alleles. Probably, this is a consequence of a disrupted organization of cortical microtubules, observed using fluorescently tagged tubulin proteins in trm4 SCE cells. Furthermore, TRM4 proteins co-aligned with microtubules and interacted directly with CELLULOSE SYNTHASE 3 in two independent assays. Together, the results indicate that TRM4 is essential for microtubule array organization and therefore correct cellulose orientation in the SCE cells, as well as the establishment of the subsequent mucilage architecture.

One-Step Lignocellulose Fractionation by using 2,5-Furandicarboxylic Acid as a Biogenic and Recyclable Catalyst.

To develop novel biorefinery concepts, the use of bio-based catalysts and solvents must be aligned with the principles of green chemistry. In this context, biogenic 2,5-furandicarboxylic acid (FDCA) is a very promising yet underused molecule with high potential for application as an acid catalyst, combining feasibility and sustainability with efficient and straightforward recovery. In this study, FDCA was evaluated as a catalyst in the recently developed OrganoCat pretreatment, a biphasic lignocellulose fractionation system. The catalyst was investigated for the efficient fractionation of the three main components-lignin, cellulose and noncellulosic sugars-with particular focus on the lignin quality, on the effect on enzymatic hydrolysis of the cellulosic residue, and on the noncellulosic sugar extraction. To address recovery of FDCA from the OrganoCat system, a method was developed, leading to the recovery of >97 % of FDCA with a spectroscopic purity of >99 %, maintaining full activity in consecutive runs.

OrganoCat pretreatment of perennial plants: Synergies between a biogenic fractionation and valuable feedstocks.

A successful biorefinery needs to align suitable pretreatment with sustainable production of biomasses. Herein, four perennial plants, (Sida, Silphium, Miscanthus and Szarvasi) regarded as promising feedstocks for biorefineries were subjected to the OrganoCat pretreatment. The technology was successfully applied to the different perennial plants revealing that pretreatment of grasses was more efficient than of non-grasses. Thorough analyses of the lignocellulose - before and after fractionation - enabled a detailed description of the fate of cellulosic, non-cellulosic polysaccharides and lignin during the pretreatment. Especially Szarvasi pulp displayed outstanding results in terms of fractionation efficiency and enzymatic digestibility, though in all cases successful lignocellulose fractionation was observed. These insights into the structural composition of different perennial plant species and the impact of the OrganoCat pretreatment on the plant material leads to useful information to strategically adapt such processes to the individual lignocellulosic material aiming for a full valorisation.

Insights into cell wall structure of Sida hermaphrodita and its influence on recalcitrance.

The perennial plant Sida hermaphrodita (Sida) is attracting attention as potential energy crop. Here, the first detailed view on non-cellulosic Sida cell wall polysaccharide composition, structure and architecture is given. Cell walls were prepared from Sida stems and sequentially extracted with aqueous buffers and alkali. The structures of the quantitatively predominant polysaccharides present in each fraction were determined by biochemical characterization, glycome profiling and mass spectrometry. The amounts of glucose released by Accellerase-1500® treatment of the cell wall and the cell wall residue remaining after each extraction were used to assess the roles of pectin and hemicellulose in the recalcitrance of Sida biomass. 4-O-Methyl glucuronoxylan with a low proportion of side substitutions was identified as the major non-cellulosic glycan component of Sida stem cell walls. Pectic polysaccharides and xylans were found to be associated with lignin, suggesting that these polysaccharides have roles in Sida cell wall recalcitrance to enzymatic hydrolysis.

Cell wall modification in tobacco by differential targeting of recombinant endoglucanase from Trichoderma reesei.

BACKGROUND: The development of transgenic plants as a production platform for biomass-degrading enzymes is a promising tool for an economically feasible allocation of enzymes processing lignocellulose. Previous research has already identified a major limitation of in planta production such as interference with the structure and integrity of the plant cell wall resulting in a negative influence on plant growth and development. RESULTS: Here, we describe the in planta expression of endoglucanase TrCel5A from the mesophilic fungus Trichoderma reesei with differential intracellular targeting and evaluate its impact on the tobacco cell wall composition. Targeting of the enzyme to the apoplast leads to distinct changes in cell polysaccharides such as glucose level in the matrix polysaccharides (MPS). These effects are combined with severe changes in plant development. Retention of TrCel5A in the endoplasmic reticulum (ER) could avoid visible effects on plant growth under the chosen conditions, but exhibits changes in the composition of the MPS. CONCLUSIONS: These results give new insights into the complex interaction of heterologous cellulase expression with cell wall development and it outlines novel promising strategies to engineer plant cell walls for improved biomass processing.

Challenges and advances in the heterologous expression of cellulolytic enzymes: a review.

Second generation biofuel development is increasingly reliant on the recombinant expression of cellulases. Designing or identifying successful expression systems is thus of preeminent importance to industrial progress in the field. Recombinant production of cellulases has been performed using a wide range of expression systems in bacteria, yeasts and plants. In a number of these systems, particularly when using bacteria and plants, significant challenges have been experienced in expressing full-length proteins or proteins at high yield. Further difficulties have been encountered in designing recombinant systems for surface-display of cellulases and for use in consolidated bioprocessing in bacteria and yeast. For establishing cellulase expression in plants, various strategies are utilized to overcome problems, such as the auto-hydrolysis of developing plant cell walls. In this review, we investigate the major challenges, as well as the major advances made to date in the recombinant expression of cellulases across the commonly used bacterial, plant and yeast systems. We review some of the critical aspects to be considered for industrial-scale cellulase production.