Solar light driven atomic and electronic transformations in a plasmonic Ni@NiO/NiCO3 photocatalyst revealed by ambient pressure X-ray photoelectron spectroscopy.

This work employs ambient pressure X-ray photoelectron spectroscopy (APXPS) to delve into the atomic and electronic transformations of a core-shell Ni@NiO/NiCO3 photocatalyst - a model system for visible light active plasmonic photocatalysts used in water splitting for hydrogen production. This catalyst exhibits reversible structural and electronic changes in response to water vapor and solar simulator light. In this study, APXPS spectra were obtained under a 1 millibar water vapor pressure, employing a solar simulator with an AM 1.5 filter to measure spectral data under visible light illumination. The in situ APXPS spectra indicate that the metallic Ni core absorbs the light, exciting plasmons, and creates hot electrons that are subsequently utilized through hot electron injection in the hydrogen evolution reaction (HER) by NiCO3. Additionally, the data show that NiO undergoes reversible oxidation to NiOOH in the presence of water vapor and light. The present work also investigates the contribution of carbonate and its involvement in the photocatalytic reaction mechanism, shedding light on this seldom-explored aspect of photocatalysis. The APXPS results highlight the photochemical reduction of carbonates into -COOH, contributing to the deactivation of the photocatalyst. This work demonstrates the APXPS efficacy in examining photochemical reactions, charge transfer dynamics and intermediates in potential photocatalysts under near realistic conditions.

Redox dynamics and surface structures of an active palladium catalyst during methane oxidation.

Catalysts based on palladium are among the most effective in the complete oxidation of methane. Despite extensive studies and notable advances, the nature of their catalytically active species and conceivable structural dynamics remains only partially understood. Here, we combine operando transmission electron microscopy (TEM) with near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT) calculations to investigate the active state and catalytic function of Pd nanoparticles (NPs) under methane oxidation conditions. We show that the particle size, phase composition and dynamics respond appreciably to changes in the gas-phase chemical potential. In combination with mass spectrometry (MS) conducted simultaneously with in situ observations, we uncover that the catalytically active state exhibits phase coexistence and oscillatory phase transitions between Pd and PdO. Aided by DFT calculations, we provide a rationale for the observed redox dynamics and demonstrate that the emergence of catalytic activity is related to the dynamic interplay between coexisting phases, with the resulting strained PdO having more favorable energetics for methane oxidation.

Ultrathin Two-dimensional Layered Composite Carbosilicates from in situ Unzipped Carbon Nanotubes and Exfoliated Bulk Silica.

A key task in today's inorganic synthetic chemistry is to develop effective reactions, routes, and associated techniques aiming to create new functional materials with specifically desired multilevel structures and properties. Herein, we report an ultrathin two-dimensional layered composite of graphene ribbon and silicate via a simple and scalable one-pot reaction, which leads to the creation of a novel carbon-metal-silicate hybrid family: carbosilicate. The graphene ribbon is in situ formed by unzipping carbon nanotubes, while the ultrathin silicate is in situ obtained from bulk silica or commercial glass; transition metals (Fe or Ni) oxidized by water act as bridging agent, covalently bonding the two structures. The unprecedented structure combines the superior properties of the silicate and the nanocarbon, which triggers some specific novel properties. All processes during synthesis are complementary to each other. The associated synergistic chemistry could stimulate the discovery of a large class of more interesting, functionalized structures and materials.

Carbon Encapsulation of Supported Metallic Iridium Nanoparticles: An in Situ Transmission Electron Microscopy Study and Implications for Hydrogen Evolution Reaction.

Carbon-supported metal nanoparticles (NPs) comprise an important class of heterogeneous catalysts. The interaction between the metal and carbon support influences the overall material properties, viz., the catalytic performance. Herein we use in situ and ex situ transmission electron microscopy (TEM) in combination with in situ X-ray spectroscopy (XPS) to investigate the encapsulation of metallic iridium NPs by carbon in an Ir/C catalyst. Real-time atomic-scale imaging visualizes particle reshaping and increased graphitization of the carbon support upon heating of Ir/C in vacuum. According to in situ TEM results, carbon overcoating grows over Ir NPs during the heating process, starting from ca. 550 °C. With the carbon overlayers formed, no sintering and migration of Ir NPs is observed at 800 °C, yet the initial Ir NPs sinter at or below 550 °C, i.e., at a temperature associated with an incomplete particle encapsulation. The carbon overlayer corrugates when the temperature is decreased from 800 to 200 °C and this process is associated with the particle surface reconstruction and is reversible, such that the corrugated carbon overlayer can be smoothed out by increasing the temperature back to 800 °C. The catalytic performance (activity and stability) of the encapsulated Ir NPs in the hydrogen evolution reaction (HER) is higher than that of the initial (nonencapsulated) state of Ir/C. Overall, this work highlights microscopic details of the currently understudied phenomenon of the carbon encapsulation of supported noble metal NPs and demonstrates additionally that the encapsulation by carbon is an effective measure for tuning the catalytic performance.

Low-Temperature Hydrogenation of CO2 to Methanol in Water on ZnO-Supported CuAu Nanoalloys.

Optimizing processes and materials for the valorization of CO2 to hydrogen carriers or platform chemicals is a key step for mitigating global warming and for the sustainable use of renewables. We report here on the hydrogenation of CO2 in water on ZnO-supported CuAu nanoalloys, based on ≤7 mol % Au. Cux Auy /ZnO catalysts were characterized using 197 Au Mössbauer, in situ X-ray absorption (Au LIII - and Cu K-edges), and ambient pressure X-ray photoelectron (APXP) spectroscopic methods together with X-ray diffraction and high-resolution electron microscopy. At 200 °C, the conversion of CO2 showed a significant increase by 34 times (from 0.1 to 3.4 %) upon increasing Cu93 Au7 loading from 1 to 10 wt %, while maintaining methanol selectivity at 100 %. Limited CO selectivity (4-6 %) was observed upon increasing temperature up to 240 °C but associated with a ≈3-fold increase in CO2 conversion. Based on APXPS during CO2 hydrogenation in an H2 O-rich mixture, Cu segregates preferentially to the surface in a mainly metallic state, while slightly charged Au submerges deeper into the subsurface region. These results and detailed structural analyses are topics of the present contribution.

Photocatalytic setup for in situ and operando ambient-pressure X-ray photoelectron spectroscopy at MAX IV Laboratory.

The Ambient-Pressure X-ray Photoelectron Spectroscopy (APXPS) endstation at the SPECIES beamline at MAX IV Laboratory has been improved. The latest upgrades help in performing photo-assisted experiments under operando conditions in the mbar pressure range using gas and vapour mixtures whilst also reducing beam damage to the sample caused by X-ray irradiation. This article reports on endstation upgrades for APXPS and examples of scientific cases of in situ photocatalysis, photoreduction and photo-assisted atomic layer deposition (photo-ALD).

Insights into the electronic structure of hydroxyl on Ag(110) under near ambient conditions.

Adsorbed hydroxyl is a key intermediate present in many catalytic reactions and electrochemical processes. In particular, hydroxyl adsorbed on noble metal surfaces has attracted attention due to its role in water-gas shift, selective oxidation of hydrocarbons and water splitting. In this work, from a well-defined oxygen covered Ag(110) surface with O-p(2 × 1) reconstruction, we prepared a fully hydroxylated surface phase in equilibrium with water and oxygen in the gas phase under near ambient conditions. In situ soft X-ray spectroscopy combined with density functional theory revealed distinctive modifications in the electronic structure of the adsorbate layer upon hydroxylation. We show that both the core and valence electronic states of OH adsorbates have higher binding energies relative to the Fermi level than the states for the O adsorbate. The OH orbitals interact with the d band of Ag giving rise to hybridized orbitals with bonding and anti-bonding symmetry, with larger energy splitting than the oxygen adsorbate.

Near-Ambient Pressure XPS and MS Study of CO Oxidation over Model Pd-Au/HOPG Catalysts: The Effect of the Metal Ratio.

In this study, the dependence of the catalytic activity of highly oriented pyrolytic graphite (HOPG)-supported bimetallic Pd-Au catalysts towards the CO oxidation based on the Pd/Au atomic ratio was investigated. The activities of two model catalysts differing from each other in the initial Pd/Au atomic ratios appeared as distinctly different in terms of their ignition temperatures. More specifically, the PdAu-2 sample with a lower Pd/Au surface ratio (~0.75) was already active at temperatures less than 150 °C, while the PdAu-1 sample with a higher Pd/Au surface ratio (~1.0) became active only at temperatures above 200 °C. NAP XPS revealed that the exposure of the catalysts to a reaction mixture at RT induces the palladium surface segregation accompanied by an enrichment of the near-surface regions of the two-component Pd-Au alloy nanoparticles with Pd due to adsorption of CO on palladium atoms. The segregation extent depends on the initial Pd/Au surface ratio. The difference in activity between these two catalysts is determined by the presence or higher concentration of specific active Pd sites on the surface of bimetallic particles, i.e., by the ensemble effect. Upon cooling the sample down to room temperature, the reverse redistribution of the atomic composition within near-surface regions occurs, which switches the catalyst back into inactive state. This observation strongly suggests that the optimum active sites emerge under reaction conditions exclusively, involving both high temperature and a reactive atmosphere.

Investigation of Electrocatalysts Produced by a Novel Thermal Spray Deposition Method.

Common methods to produce supported catalysts include impregnation, precipitation, and thermal spray techniques. Supported electrocatalysts produced by a novel method for thermal spray deposition were investigated with respect to their structural properties, elemental composition, and electrochemical performance. This was done using electron microscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. Various shapes and sizes of catalyst particles were found. The materials exhibit different activity towards oxidation and reduction of Fe. The results show that this preparation method enables the selection of particle coverage as well as size and shape of the catalyst material. Due to the great variability of support and catalyst materials accessible with this technique, this approach is a useful extension to other preparation methods for electrocatalysts.

F-doping of nanostructured ZnO: a way to modify structural, electronic, and surface properties.

Polycrystalline ZnO is a material often used in heterogeneous catalysis. Its properties can be altered by the addition of dopants. We used gaseous fluorine (F2(g)) as direct way to incorporate fluoride in ZnO as anionic dopants. Here, the consequences of this treatment on the structural and electronic properties, as well as on the acidic/basic sites of the surface, are investigated. It is shown that the amount of F incorporation into the structure can be controlled by the synthesis parameters (t, T, p). While the surface of ZnO was altered as shown by, e.g., IR spectroscopy, XPS, and STEM/EDX measurements, the F2 treatment also influenced the electronic properties (optical band gap, conductivity) of ZnO. Furthermore, the Lewis acidity/basicity of the surface was affected which is evidenced by using, e.g., different probe molecules (CO2, NH3). In situ investigations of the fluorination process offer valuable insights on the fluorination process itself.

Influence of CO on the Activation, O-Vacancy Formation, and Performance of Au/ZnO Catalysts in CO2 Hydrogenation to Methanol.

The impact of CO on the activation and reaction characteristics of Au/ZnO catalysts in methanol synthesis from a CO2/H2 mixture was studied by kinetic, near ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy at the O K-edge, together with in situ Foureir transform infrared measurements. Transient measurements under up to industrial reaction conditions (50 bar, 240 °C) show a pronounced transient increase of the activity for methanol formation from CO2/H2 after exposure to a CO/H2 reaction gas mixture, while the steady-state activity is similar to that observed directly after oxidative pretreatment. For the reaction in CO/H2, the much longer activation phase is accompanied by formation of CO2 due to reaction of CO with the ZnO catalyst support. This leads to O-vacancy formation on the support at an extent significantly higher than in CO2/H2. The consequences of these findings on the mechanistic understanding of methanol formation from CO2/H2 on Au/ZnO and for ZnO-supported catalysts in general are discussed.

Negative Charging of Au Nanoparticles during Methanol Synthesis from CO2 /H2 on a Au/ZnO Catalyst: Insights from Operando IR and Near-Ambient-Pressure XPS and XAS Measurements.

The electronic and structural properties of Au/ZnO under industrial and idealized methanol synthesis conditions have been investigated. This was achieved by kinetic measurements in combination with time-resolved operando infrared (DRIFTS) as well as in situ near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and X-ray absorption near-edge spectroscopy (XANES) measurements at the O K-edge together with high-resolution electron microscopy. The adsorption of CO during the reaction revealed the presence of negatively charged Au nanoparticles/Au sites during the initial phase of the reaction. Near-ambient-pressure XPS and XANES demonstrate the build-up of O vacancies during the reaction, which goes along with a substantial increase in the rate of methanol formation. The results are discussed in comparison with previous findings for Cu/ZnO and Au/ZnO catalysts.

Are multiple oxygen species selective in ethylene epoxidation on silver?

The nature of the oxygen species active in ethylene epoxidation is a long-standing question. While the structure of the oxygen species that participates in total oxidation (nucleophilic oxygen) is known the atomic structure of the selective species (electrophilic oxygen) is still debated. Here, we use both in situ and UHV X-ray Photoelectron Spectroscopy (XPS) to study the interaction of oxygen with a silver surface. We show experimental evidence that the unreconstructed adsorbed atomic oxygen (Oads) often argued to be active in epoxidation has a binding energy (BE) ≤ 528 eV, showing a core-level shift to lower BE with respect to the O-reconstructions, as previously predicted by DFT. Thus, contrary to the frequent assignment, adsorbed atomic oxygen cannot account for the electrophilic oxygen species with an O 1s BE of 530-531 eV, thought to be the active species in ethylene epoxidation. Moreover, we show that Oads is present at very low O-coverages during in situ XPS measurements and that it can be obtained at slightly higher coverages in UHV at low temperature. DFT calculations support that only low coverages of Oads are stable. The highly reactive species is titrated by background gases even at low temperature in UHV conditions. Our findings suggest that at least two different species could participate in the partial oxidation of ethylene on silver.

Cobalt-Bridged Ionic Liquid Polymer on a Carbon Nanotube for Enhanced Oxygen Evolution Reaction Activity.

By taking inspiration from the catalytic properties of single-site catalysts and the enhancement of performance through ionic liquids on metal catalysts, we exploited a scalable way to place single cobalt ions on a carbon-nanotube surface bridged by polymerized ionic liquid. Single dispersed cobalt ions coordinated by ionic liquid are used as heterogeneous catalysts for the oxygen evolution reaction (OER). Performance data reveals high activity and stable operation without chemical instability.

Ethylene Epoxidation at the Phase Transition of Copper Oxides.

Catalytic materials tend to be metastable. When a material becomes metastable close to a thermodynamic phase transition it can exhibit unique catalytic behavior. Using in situ photoemission spectroscopy and online product analysis, we have found that close to the Cu2O-CuO phase transition there is a boost in activity for a kinetically driven reaction, ethylene epoxidation, giving rise to a 20-fold selectivity enhancement relative to the selectivity observed far from the phase transition. By tuning conditions toward low oxygen chemical potential, this metastable state and the resulting enhanced selectivity can be sustained. Using density functional theory, we find that metastable O precursors to the CuO phase can account for the selectivity enhancements near the phase transition.

A near ambient pressure XPS study of Au oxidation.

The surface of a gold foil under ozone oxidation was examined by near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and scanning electron microscopy (SEM). Our in situ observations show that a surface oxide phase is formed during the exposure to ozone; however this phase decomposes under vacuum and even in the presence of ozone at temperatures higher than 300 °C. Assuming that an oxide overlayer completely covers the Au surface, the thickness of the oxide phase was estimated to be between 0.29 and 0.58 nm by energy-dependent XPS depth profiling. The surface oxidation led to structural modifications of the gold surface. These morphological changes do not disappear even under vacuum. In the Au 4f spectra, an additional component at low binding energy (83.3 eV), which appears during/after O3 treatment, is assigned to the presence of low-coordinated atoms which appear on the Au surface as a result of surface restructuring under oxidation. Ex situ SEM images demonstrate that only the region of the sample that was exposed to O3 shows the presence of ridges on the Au surface.