Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros








Base de dados
Intervalo de ano de publicação
1.
ACS Appl Mater Interfaces ; 10(40): 34163-34171, 2018 Oct 10.
Artigo em Inglês | MEDLINE | ID: mdl-30222310

RESUMO

Two-dimensional (2D) transition-metal dichalcogenides (TMDCs) have attracted considerable attention as promising building blocks for a new generation of gas-sensing devices because of their excellent electrical properties, superior response, flexibility, and low-power consumption. Owing to their large surface-to-volume ratio, various 2D TMDCs, such as MoS2, MoSe2, WS2, and WSe2, have exhibited excellent gas-sensing characteristics. However, exploration toward the enhancement of TMDC gas-sensing performance has not yet been intensively addressed. Here, we synthesized large-area uniform WS2 xSe2-2 x alloys for room-temperature gas sensors. As-synthesized WS2 xSe2-2 x alloys exhibit an elaborative composition control owing to their thermodynamically stable sulfurization process. Further, utilizing uniform WS2 xSe2-2 x alloys over a large area, we demonstrated improved NO2-sensing performance compared to WSe2 on the basis of an electronic sensitization mechanism. The WS0.96Se1.04 alloy gas sensor exhibits 2.4 times enhanced response for NO2 exposure. Further, we demonstrated a low-power wearable NO2-detecting wristband that operates at room temperature. Our results show that the proposed method is a promising strategy to improve 2D TMDC gas sensors and has a potential for applications in advanced gas-sensing devices.

2.
ACS Appl Mater Interfaces ; 10(37): 31505-31514, 2018 Sep 19.
Artigo em Inglês | MEDLINE | ID: mdl-30133251

RESUMO

Flexible zinc oxide (ZnO) nanorod (NR) ultraviolet (UV)/gas dual sensors using silver (Ag) nanoparticle (NP) templates were successfully fabricated on a polyimide substrate with nickel electrodes. Arrays of Ag NPs were used as a template for the growth of ZnO NRs, which could enhance the flexibility and the sensing properties of the devices through the localized surface plasmon resonance (LSPR) effect. The Ag NPs were fabricated by the rapid thermal annealing process of Ag thin films, and ZnO NRs were grown on Ag NPs to maximize the surface area and form networks with rod-to-rod contacts. Because of the LSPR effect by Ag NPs, the UV photoresponse of the ZnO NRs was amplified and the depletion region of ZnO NRs was formed quickly because of the Schottky contact with the Ag NPs. As a consequence, ZnO NR UV/gas dual sensors grown on the Ag NP template with a diameter of 28 nm exhibited the outstanding UV-sensing characteristics with a UV on-off ratio of 3628 and a rising time ( tr) and a decay time ( td) of 3.52 and 0.33 s upon UV exposure, along with excellent NO2-sensing characteristics with a stable gas on-off ratio of 288.5 and a tr and td of 38 and 62 s upon NO2 exposure. Furthermore, the sensors grown on the Ag NP template exhibited good mechanical flexibility and stable sensing properties without significant degradation even after the bending test up to 10 000 cycles at the bending radius of 5 mm.

3.
ACS Appl Mater Interfaces ; 10(28): 23910-23917, 2018 Jul 18.
Artigo em Inglês | MEDLINE | ID: mdl-29932675

RESUMO

Semiconducting two-dimensional transition-metal dichalcogenides are considered promising gas-sensing materials because of their large surface-to-volume ratio, excellent electrical conductivity, and susceptible surfaces. However, enhancement of the recovery performance has not yet been intensively explored. In this study, a large-area uniform WSe2 is synthesized for use in a high-performance semiconductor gas sensor. At room temperature, the WSe2 gas sensor shows a significantly high response (4140%) to NO2 compared to the use of NH3, CO2, and acetone. This paper demonstrates improved recovery of the WSe2 gas sensor's NO2-sensing performance by utilizing external thermal energy. In addition, a novel strategy for improving the recovery of the WSe2 gas sensor is realized by reacting NH3 and adsorbed NO2 on the surface of WSe2: the NO2 molecules are spontaneously desorbed, and the recovery time is dramatically decreased (85 min → 43 s). It is expected that the fast recovery of the WSe2 gas sensor achieved here will be used to develop an environmental monitoring system platform.

4.
Nanoscale ; 10(19): 9338-9345, 2018 May 17.
Artigo em Inglês | MEDLINE | ID: mdl-29737989

RESUMO

The efficient synthesis of two-dimensional molybdenum disulfide (2D MoS2) at low temperatures is essential for use in flexible devices. In this study, 2D MoS2 was grown directly at a low temperature of 200 °C on both hard (SiO2) and soft substrates (polyimide (PI)) using chemical vapor deposition (CVD) with Mo(CO)6 and H2S. We investigated the effect of the growth temperature and Mo concentration on the layered growth by Raman spectroscopy and microscopy. 2D MoS2 was grown by using low Mo concentration at a low temperature. Through optical microscopy, Raman spectroscopy, X-ray photoemission spectroscopy, photoluminescence, and transmission electron microscopy measurements, MoS2 produced by low-temperature CVD was determined to possess a layered structure with good uniformity, stoichiometry, and a controllable number of layers. Furthermore, we demonstrated the realization of a 2D MoS2-based flexible gas sensor on a PI substrate without any transfer processes, with competitive sensor performance and mechanical durability at room temperature. This fabrication process has potential for burgeoning flexible and wearable nanotechnology applications.

5.
ACS Appl Mater Interfaces ; 9(38): 32876-32886, 2017 Sep 27.
Artigo em Inglês | MEDLINE | ID: mdl-28882036

RESUMO

Micropatternable double-faced (DF) zinc oxide (ZnO) nanoflowers (NFs) for flexible gas sensors have been successfully fabricated on a polyimide (PI) substrate with single-walled carbon nanotubes (SWCNTs) as electrode. The fabricated sensor comprises ZnO nanoshells laid out on a PI substrate at regular intervals, on which ZnO nanorods (NRs) were grown in- and outside the shells to maximize the surface area and form a connected network. This three-dimensional network structure possesses multiple gas diffusion channels and the micropatterned island structure allows the stability of the flexible devices to be enhanced by dispersing the strain into the empty spaces of the substrate. Moreover, the micropatterning technique on a flexible substrate enables highly integrated nanodevices to be fabricated. The SWCNTs were chosen as the electrode for their flexibility and the Schottky barrier they form with ZnO, improving the sensing performance. The devices exhibited high selectivity toward NO2 as well as outstanding sensing characteristics with a stable response of 218.1, fast rising and decay times of 25.0 and 14.1 s, respectively, and percent recovery greater than 98% upon NO2 exposure. The superior sensing properties arose from a combination of high surface area, numerous active junction points, donor point defects in the ZnO NRs, and the use of the SWCNT electrode. Furthermore, the DF-ZnO NF gas sensor showed sustainable mechanical stability. Despite the physical degradation observed, the devices still demonstrated outstanding sensing characteristics after 10 000 bending cycles at a curvature radius of 5 mm.

6.
ACS Nano ; 10(10): 9287-9296, 2016 Oct 25.
Artigo em Inglês | MEDLINE | ID: mdl-27666720

RESUMO

Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDCs) are promising gas-sensing materials due to their large surface-to-volume ratio. However, their poor gas-sensing performance resulting from the low response, incomplete recovery, and insufficient selectivity hinders the realization of high-performance 2D TMDC gas sensors. Here, we demonstrate the improvement of gas-sensing performance of large-area tungsten disulfide (WS2) nanosheets through surface functionalization using Ag nanowires (NWs). Large-area WS2 nanosheets were synthesized through atomic layer deposition of WO3 followed by sulfurization. The pristine WS2 gas sensors exhibited a significant response to acetone and NO2 but an incomplete recovery in the case of NO2 sensing. After AgNW functionalization, the WS2 gas sensor showed dramatically improved response (667%) and recovery upon NO2 exposure. Our results establish that the proposed method is a promising strategy to improve 2D TMDC gas sensors.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA