Bio-Inspired Aquatic Propulsion Mechanism Using Viscoelastic Fin Containing Fiber Composite Shear Thickening Fluid.

Many propulsion mechanisms utilizing elastic fins inspired by the caudal fins of aquatic animals have been developed. However, these elastic fins possess a characteristic whereby the rigidity required to achieve propulsion force and speed increases as the oscillation velocity increases. Therefore, by adding an actuator including a variable stiffness mechanism to the fin it is possible to maintain the optimal stiffness at all times. However, if the aforementioned characteristics allowing the fin itself to change stiffness are present, the need for a variable stiffness mechanism is eliminated, leading to possibilities such as the simplification of the mechanism, improvements in fault tolerance, and enhancements in fin efficiency. The authors developed a fiber composite viscoelastic fin by adding fibers to a shear thickening fluid (STF) and examined the speed dependency of the fin's rigidity. In this work, we examined the structure and speed dependency of the fin's rigidity, as well as the propulsion characteristics in still water and in uniform flow. As a result, the fiber-containing fin containing the STF oobleck (an aqueous suspension of potato starch) demonstrated higher propulsion in still water and higher self-propelled equivalent speed in uniform water flow than elastic fins.

Development and practical evaluation of a saturation effect learning simulator for inflow magnetic resonance angiography.

The quality of visualization in inflow magnetic resonance angiography (MRA) depends highly on the excitation state of the longitudinal magnetization obtained using specified imaging parameters. In addition, signal intensity changes controlled by the preparation pulse-such as inversion recovery (IR) and saturation recovery (SR)-can potentially be used as quantitative physiological values. Although having practitioners understand these relationships both qualitatively and quantitatively is important, handling clinical equipment in practical learning or experiments involves limited opportunities. The simulator corresponds to a three-dimensional spoiled gradient echo sequence and allows users to freely input multiple virtual excitation effects in space and time. The purpose of this study was to quantitatively evaluate the agreement between the measured MRAs obtained in flow phantom tests and virtual MRAs simulated under similar conditions. We imaged two vascular flow phantoms on a 3.0 T MR system using three-dimensional (3D) time-of-flight (TOF) MRA and 3D inversion recovery tissue signal suppression (IR-suppression) MRA protocols. We evaluated quantitative values for consistency between the measured and virtual MRAs images with matched spatial resolution. Then we assessed the coincidence by reformatting maximum-intensity projection images with 1 mm isotropic pixels, with it ranging from 89.6 to 92.0% and 89.1 to 92.9% for TOF MRA and IR-suppression MRA, respectively. These results may be useful as a reference index for the theoretical study of MRA images by practitioners, for complementary validation by phantom testing, or for the development of MRI-related simulators.

Light-induced production of isobutanol and 3-methyl-1-butanol by metabolically engineered cyanobacteria.

BACKGROUND: Cyanobacteria are engineered via heterologous biosynthetic pathways to produce value-added chemicals via photosynthesis. Various chemicals have been successfully produced in engineered cyanobacteria. Chemical inducer-dependent promoters are used to induce the expression of target biosynthetic pathway genes. A chemical inducer is not ideal for large-scale reactions owing to its high cost; therefore, it is important to develop scaling-up methods to avoid their use. In this study, we designed a green light-inducible alcohol production system using the CcaS/CcaR green light gene expression system in the cyanobacterium Synechocystis sp. PCC 6803 (PCC 6803). RESULTS: To establish the green light-inducible production of isobutanol and 3-methyl-1-butanol (3MB) in PCC 6803, keto-acid decarboxylase (kdc) and alcohol dehydrogenase (adh) were expressed under the control of the CcaS/CcaR system. Increases in the transcription level were induced by irradiation with red and green light without severe effects on host cell growth. We found that the production of isobutanol and 3MB from carbon dioxide (CO2) was induced under red and green light illumination and was substantially repressed under red light illumination alone. Finally, production titers of isobutanol and 3MB reached 238 mg L-1 and 75 mg L-1, respectively, in 5 days under red and green light illumination, and these values are comparable to those reported in previous studies using chemical inducers. CONCLUSION: A green light-induced alcohol production system was successfully integrated into cyanobacteria to produce value-added chemicals without using expensive chemical inducers. The green light-regulated production of isobutanol and 3MB from CO2 is eco-friendly and cost-effective. This study demonstrates that light regulation is a potential tool for producing chemicals and increases the feasibility of cyanobacterial bioprocesses.

Utility of a GFP-expressing Barley yellow mosaic virus for analyzing disease resistance genes.

The soil-borne plasmodiophorid Polymyxa graminis is a vector for Barley yellow mosaic virus (BaYMV), which can severely damage barley plants. Although 22 disease resistance genes have been identified, only a few have been used for breeding virus-resistant cultivars. Recently, BaYMV strains capable of overcoming the effects of some of these genes have been detected. In this study, green fluorescent protein (GFP)-expressing BaYMV was constructed and used to examine viral dynamics in inoculated barley plants. Leaf inoculations resulted in higher infection rates than root or crown inoculations. Additionally, inoculations of some resistant cultivars produced infections that were similar to those observed in a field test. The results of this study indicate that the GFP-expressing virus is a useful tool for visualizing virus replication and dynamics, and for understanding resistance mechanisms.

Preparation of a Cage-Type Polyglycolic Acid/Collagen Nanofiber Blend with Improved Surface Wettability and Handling Properties for Potential Biomedical Applications.

Electrospun biobased polymeric nanofiber blends are widely used as biomaterials for different applications, such as tissue engineering and cell adhesion; however, their surface wettability and handling require further improvements for their practical utilization in the assistance of surgical operations. Therefore, Polyglycolic acid (PGA) and collagen-based nanofibers with three different ratios (40:60, 50:50 and 60:40) were prepared using the electrospinning method, and their surface wettability was improved using ozonation and plasma (nitrogen) treatment. The effect on the wettability and the morphology of pristine and blended PGA and collagen nanofibers was assessed using the WCA test and SEM, respectively. It was observed that PGA/collagen with the ratio 60:40 was the optimal blend, which resulted in nanofibers with easy handling and bead-free morphology that could maintain their structural integrity even after the surface treatments, imparting hydrophilicity on the surface, which can be advantageous for cell adhesion applications. Additionally, a cage-type collector was used during the electrospinning process to provide better handling properties to (PGA/collagen 60:40) blend. The resultant nanofiber mat was then incorporated with activated poly (α,ß-malic acid) to improve its surface hydrophilicity. The chemical composition of PGA/collagen 60:40 was assessed using FTIR spectroscopy, supported by Raman spectroscopy.

Fabrication of Poly(Ethylene-glycol 1,4-Cyclohexane Dimethylene-Isosorbide-Terephthalate) Electrospun Nanofiber Mats for Potential Infiltration of Fibroblast Cells.

Recently, bio-based electrospun nanofiber mats (ENMs) have gained substantial attention for preparing polymer-based biomaterials intended for use in cell culture. Herein, we prepared poly(ethylene-glycol 1,4-Cyclohexane dimethylene-isosorbide-terephthalate) (PEICT) ENMs using the electrospinning technique. Cell adhesion and cell viability of PEICT ENMs were checked by fibroblast cell culture. Field emission electron microscope (FE-SEM) image showed a randomly interconnected fiber network, smooth morphology, and cell adhesion on PEICT ENM. Fibroblasts were cultured in an adopted cell culturing environment on the surface of PEICT ENMs to confirm their biocompatibility and cell viability. Additionally, the chemical structure of PEICT ENM was checked under Fourier-transform infrared (FTIR) spectroscopy and the results were supported by -ray photoelectron (XPS) spectroscopy. The water contact angle (WCA) test showed the hydrophobic behavior of PEICT ENMs in parallel to good fibroblast cell adhesion. Hence, the results confirmed that PEICT ENMs can be potentially utilized as a biomaterial.

Zein nanofibers via deep eutectic solvent electrospinning: tunable morphology with super hydrophilic properties.

The use of organic solvents for the preparation of nanofibers are challenged due to their volatile and hazardous behavior. Recently deep eutectic solvents (DES) are widely recognized as non-volatile and non-hazardous solvents which never been utilized directly for nanofabrication via electrospinning. Here, we present the preparation of Zein nanofibers using deep eutectic solvents (DES-Zein). The DES-Zein nanofibers were produced at an optimized polymer concentration of 45% (w/w) with pH 7.3 and electroconductivity 233 mS cm-1. DES-Zein nanofibers showed aligned to tweed like cedar leaf morphology tuned by varying the spreading angle from 0° to 90°. In contrast to hydrophobic conventional Zein nanofibers, DES-Zein nanofibers showed super hydrophilic character and about 200 nm finer average diameter. The proposed method of preparing Zein nanofibers using DES opens a new door to continuous electrospinning with tunable morphology, having potential to be used for environmental and biomedical applications.

The passive biomechanics of human pelvic collecting lymphatic vessels.

The lymphatic system has a major significance in the metastatic pathways in women's cancers. Lymphatic pumping depends on both extrinsic and intrinsic mechanisms, and the mechanical behavior of lymphatic vessels regulates the function of the system. However, data on the mechanical properties and function of human lymphatics are lacking. Our aim is to characterize, for the first time, the passive biomechanical behavior of human collecting lymphatic vessels removed at pelvic lymph node dissection during primary debulking surgeries for epithelial ovarian cancer. Isolated vessels were cannulated and then pressurized at varying levels of applied axial stretch in a calcium-free Krebs buffer. Pressurized vessels were then imaged using multi-photon microscopy for collagen-elastin structural composition and fiber orientation. Both pressure-diameter and force-elongation responses were highly nonlinear, and axial stretching of the vessel served to decrease diameter at constant pressure. Pressure-diameter behavior for the human vessels is very similar to data from rat mesenteric vessels, though the human vessels were approximately 10× larger than those from rats. Multiphoton microscopy revealed the vessels to be composed of an inner layer of elastin with an outer layer of aligned collagen fibers. This is the first study that successfully described the passive biomechanical response and composition of human lymphatic vessels in patients with ovarian cancer. Future work should expand on this knowledge base with investigations of vessels from other anatomical locations, contractile behavior, and the implications on metastatic cell transport.

Differential Regulation of Plasma Copeptin Levels in Patients with Heart Failure: A Single-Center Prospective Study.

Elevated levels of arginine vasopressin (AVP) have been reported to be involved in the pathogenesis of heart failure (HF). Recent evidence has shown the role of copeptin, the C-terminal fragment of pro-AVP, as a biomarker in patients with HF. However, the relevant information is still limited. Therefore, we evaluated 39 Japanese patients admitted for HF between 2013 and 2015 (23 males and 16 females with an average age of 79.2 years). They were treated according to the Japanese acute HF guideline. Plasma copeptin levels were measured on admission and about 1 week later. The median plasma copeptin levels on admission were 0.5 (0.1-50.6) pmol/L, higher than the normal values (0.24 ± 0.06 pmol/L). Despite the similar clinical severity on admission, the patients showed great variability in plasma copeptin levels. They were divided into three groups (13 patients/group) according to plasma copeptin levels on admission: highest (> 30.8 pmol/L), midrange, and lowest (< 0.2 pmol/L) groups. Initial treatment improved HF symptoms in 37 of 39 patients, with the two unresponsive patients in the lowest group. Notably, plasma copeptin responses to initial treatment were different, depending on admission copeptin levels. The initial treatment significantly decreased copeptin levels in the highest group, but increased copeptin levels in the lowest group. By contrast, patients in the midrange group showed no significant changes. Thus, the treatment appears to restore the plasma copeptin levels. In conclusion, HF is a complex syndrome with the differential integration of stimulatory and inhibitory inputs to the AVP/copeptin secretory system.

Effect of dietary porphyran from the red alga, Porphyra yezoensis, on glucose metabolism in diabetic KK-Ay mice.

Porphyran (POR) from the red alga Porphyra yezoensis is a water soluble dietary fiber. In this study, we investigated the effect of dietary POR on glucose metabolism in KK-Ay mice (a model for type 2 diabetes). Mice were divided into 4 groups and fed a diet containing 5% cellulose (control), POR, POR Arg or POR K. After 3 wk of feeding, plasma insulin levels and the calculated homeostasis model assessment-insulin resistance (HOMA-IR) index were significantly lower in the POR group than in the control group. Compared with the control group, plasma adiponectin levels were significantly increased in the POR, POR Arg and POR K groups. These results suggest that dietary POR should improve glucose metabolism in diabetes via up-regulation of adiponectin levels. In addition, the amount of propionic acid in the cecum of the POR group was significantly higher than in the control group and the profile of bacterial flora was changed by dietary POR. In the cecum of the POR, POR Arg and POR K groups, Bacteroides was significantly increased and Clostridium coccoides was significantly decreased compared with in the control group. The effects of dietary POR on the hindgut environment might contribute to the improvement of glucose metabolism.

Long-term effects of ezetimibe-plus-statin therapy on low-density lipoprotein cholesterol levels as compared with double-dose statin therapy in patients with coronary artery disease.

OBJECTIVE: To assess the mechanism of long-term LDL-C-lowering effect of ezetimibe-plus-statin. METHODS: Coronary artery disease patients whose LDL-C ≥ 70 mg/dL after treatment with atorvastatin 10 mg/day or rosuvastatin 2.5 mg/day were randomly assigned to receive ezetimibe 10 mg/day + statin (n = 78) or double-dose statin (n = 72) for 52 weeks. RESULTS: Greater LDL-C reduction was observed and maintained until 52 weeks in ezetimibe-plus-statin, while LDL-C levels re-increased after 12 weeks in double-dose statin. Although lathosterol/TC increased, campesterol/TC decreased more in ezetimibe-plus-statin. In contrast, lathosterol/TC unchanged and campesterol/TC increased, increasing campesterol/lathosterol ratio for 52 weeks in double-dose statin. Plasma PCSK9 levels were higher in double-dose statin than in ezetimibe-plus-statin at 12 weeks, but similar at 52 weeks. CONCLUSION: Although the difference in PCSK9 between 2 groups was transient, that in both campesterol and lathosterol persisted until 52 weeks. These results demonstrated simultaneous inhibition of cholesterol absorption and synthesis provides stable and greater decrease in LDL-C levels.

Clinical usefulness of additional treatment with ezetimibe in patients with coronary artery disease on statin therapy. - From the viewpoint of cholesterol metabolism.-.

BACKGROUND: Ezetimibe-plus-statin therapy has been reported to provide greater reduction in low-density lipoprotein cholesterol (LDL-C) level than statin monotherapy. The aim of the present study was to evaluate the relationship between LDL-C lowering effect and baseline cholesterol absorption and synthesis markers in patients with coronary artery disease (CAD). METHODS AND RESULTS: A total of 171 patients with CAD whose LDL-C level was ≥ 100 mg/dl after treatment with atorvastatin (10mg/day) or rosuvastatin (2.5 mg/day) for 4 weeks were assigned to additionally receive ezetimibe (10mg/day) plus a statin or a double dose of statin for 12 weeks. The decreases in LDL-C (-30.0 ± 15.6 mg/dl vs. -19.2 ± 14.2 mg/dl) and the ratio of campesterol, an absorption marker, to total cholesterol levels (-1.35 ± 0.90 µg/mg vs. 0.33 ± 0.74 µg/mg) were greater in the ezetimibe-plus-statin group (P<0.05, respectively). The decrease in LDL-C level in the ezetimibe-plus-statin group was greatest in patients with baseline levels of higher absorption and lower synthesis markers and smallest in patients with baseline levels of lower absorption and higher synthesis markers (-34.3 ± 15.6 mg/dl vs. -21.5 ± 16.7 mg/dl, P<0.05). The decrease in LDL-C did not differ, irrespective of baseline levels of cholesterol absorption and synthesis markers, in the double-dose statin group, and was similar to that in patients with lower absorption and higher synthesis markers in the ezetimibe-plus-statin group. CONCLUSIONS: Ezetimibe-plus-statin therapy may be useful for lowering LDL-C level, irrespective of baseline levels of cholesterol absorption and synthesis markers.

[A case of a primary gastrointestinal stromal tumor (GIST) found in the greater omentum of a 99-year-old woman].

We report the case of a primary gastrointestinal stromal tumor (GIST) found in the greater omentum of an extremely elderly woman. A 99-year-old woman with a history of heart failure and renal failure presented with dyspnea and disturbance of consciousness. A tumor located between the stomach and spleen had been detected by abdominal computed tomography three years previously. After admission, she received oxygen supplementation and diuretics. However she died of heart failure and disseminated intravascular coagulation on the 31st day of hospitalization. Autopsy was performed on the same day. A large mass measuring 12.5 x 7.0 x 7.5 cm was revealed, originating from the greater omentum. Histopathologically, it was composed of spindle cells with the nuclei showing a focal palisading pattern, however there were no mitoses. Immunohistochemically, the tumor was positive for c-kit. The tumor was diagnosed as a primary GIST of the greater omentum.

3D MRI-based anisotropic FSI models with cyclic bending for human coronary atherosclerotic plaque mechanical analysis.

Heart attack and stroke are often caused by atherosclerotic plaque rupture, which happens without warning most of the time. Magnetic resonance imaging (MRI)-based atherosclerotic plaque models with fluid-structure interactions (FSIs) have been introduced to perform flow and stress/strain analysis and identify possible mechanical and morphological indices for accurate plaque vulnerability assessment. For coronary arteries, cyclic bending associated with heart motion and anisotropy of the vessel walls may have significant influence on flow and stress/strain distributions in the plaque. FSI models with cyclic bending and anisotropic vessel properties for coronary plaques are lacking in the current literature. In this paper, cyclic bending and anisotropic vessel properties were added to 3D FSI coronary plaque models so that the models would be more realistic for more accurate computational flow and stress/strain predictions. Six computational models using one ex vivo MRI human coronary plaque specimen data were constructed to assess the effects of cyclic bending, anisotropic vessel properties, pulsating pressure, plaque structure, and axial stretch on plaque stress/strain distributions. Our results indicate that cyclic bending and anisotropic properties may cause 50-800% increase in maximum principal stress (Stress-P1) values at selected locations. The stress increase varies with location and is higher when bending is coupled with axial stretch, nonsmooth plaque structure, and resonant pressure conditions (zero phase angle shift). Effects of cyclic bending on flow behaviors are more modest (9.8% decrease in maximum velocity, 2.5% decrease in flow rate, 15% increase in maximum flow shear stress). Inclusion of cyclic bending, anisotropic vessel material properties, accurate plaque structure, and axial stretch in computational FSI models should lead to a considerable improvement of accuracy of computational stress/strain predictions for coronary plaque vulnerability assessment. Further studies incorporating additional mechanical property data and in vivo MRI data are needed to obtain more complete and accurate knowledge about flow and stress/strain behaviors in coronary plaques and to identify critical indicators for better plaque assessment and possible rupture predictions.

Cyclic Bending Contributes to High Stress in a Human Coronary Atherosclerotic Plaque and Rupture Risk: In Vitro Experimental Modeling and Ex Vivo MRI-Based Computational Modeling Approach.

Many acute cardiovascular syndromes such as heart attack and stroke are caused by atherosclerotic plaque ruptures which often happen without warning. MRI-based models with fluid-structure interactions (FSI) have been introduced to perform flow and stress/strain analysis for atherosclerotic plaques and identify possible mechanical and morphological indices for accurate plaque vulnerability assessment. In this paper, cyclic bending was added to 3D FSI coronary plaque models for more accurate mechanical predictions. Curvature variation was prescribed using the data of a human left anterior descending (LAD) coronary artery. Five computational models were constructed based on ex vivo MRI human coronary plaque data to assess the effects of cyclic bending, pulsating pressure, plaque structure, and axial stretch on plaque stress/strain distributions. In vitro experiments using a hydrogel stenosis model with cyclical bending were performed to observe effect of cyclical bending on flow conditions. Our results indicate that cyclical bending may cause more than 100% or even up to more than 1000% increase in maximum principal stress values at locations where the plaque is bent most. Stress increase is higher when bending is coupled with axial stretch, non-smooth plaque structure, or resonant pressure conditions (zero phase angle shift). Effects of cyclic bending on flow behaviors are more modest (21.6% decrease in maximum velocity, 10.8% decrease in flow rate, maximum flow shear stress changes were < 5%). Computational FSI models including cyclic bending, plaque components and structure, axial stretch, accurate in vivo measurements of pressure, curvature, and material properties should lead to significant improvement on stress-based plaque mechanical analysis and more accurate coronary plaque vulnerability assessment.

Effect of a lipid pool on stress/strain distributions in stenotic arteries: 3-D fluid-structure interactions (FSI) models.

Nonlinear 3-D models with fluid-structure interactions (FSI) based on in vitro experiments are introduced and solved by ADINA to perform flow and stress/strain analysis for stenotic arteries with lipid cores. Navier-Stokes equations are used as the governing equations for the fluid. Hyperelastic Mooney-Rivlin models are used for both the arteries and lipid cores. Our results indicate that critical plaque stress/strain conditions are affected considerably by stenosis severity, eccentricity, lipid pool size, shape and position, plaque cap thickness, axial stretch, pressure, and fluid-structure interactions, and may be used for possible plaque rupture predictions.

Effect of stenosis asymmetry on blood flow and artery compression: a three-dimensional fluid-structure interaction model.

A nonlinear three-dimensional thick-wall model with fluid-structure interactions is introduced to simulate blood flow in carotid arteries with an asymmetric stenosis to quantify the effects of stenosis severity, eccentricity, and pressure conditions on blood flow and artery compression (compressive stress in the wall). Mechanical properties of the tube wall are measured using a thick-wall stenosis model made of polyvinyl alcohal hydrogel whose mechanical properties are close to that of carotid arteries. A hyperelastic Mooney-Rivlin model is used to implement the experimentally measured nonlinear elastic properties of the tube wall. A 36.5% pre-axial stretch is applied to make the simulation physiological. The Navier-Stokes equations in curvilinear form are used for the fluid model. Our results indicate that severe stenosis causes critical flow conditions, high tensile stress, and considerable compressive stress in the stenosis plaque which may be related to artery compression and plaque cap rupture. Stenosis asymmetry leads to higher artery compression, higher shear stress and a larger flow separation region. Computational results are verified by available experimental data.

Infected left atrial myxoma.

A 47-year-old Japanese woman with a continuing high fever was promptly diagnosed as having infected atrial myxoma one day after admission based on transthoracic echocardiographic findings and positivity for bacteria in blood culture. The mass was removed by an urgent open heart surgery. Histopathological examination confirmed that this mass was a myxoma with gram-positive bacterial colonies. Generally, antemortem diagnosis is difficult and there is a high mortality of patients with infected myxoma; however, this patient completely recovered from the illness because of the prompt diagnosis. This is the 37th case of definite infected myxoma reported in the literature. The cause of infection of this patient might have been the acupuncture therapy she underwent for weight reduction.

[Biventricular pacing using two pacemakers and triggered VVT mode in patients with atrial fibrillation and congestive heart failure: a case report].

A 76-year-old female had undergone implantation of a single chamber pacemaker for sick sinus syndrome 20 years previously. She developed chronic atrial fibrillation and required repeated admission due to congestive heart failure. She had significant mitral and tricuspid regurgitation. Paradoxical movement of the intraventricular septum was severe. Due to right ventricular apical pacing, significant interventricular conduction delay was present with a paced QRS duration of 189 msec. The left ventricular pacing lead was positioned via the coronary sinus. The mode of the previously implanted pacemaker was set at VVT. Biventricular pacing could be achieved even in intrinsic beats by VVT mode. The battery life time was improved. This method is useful in patients with conventional pacemakers.