Discovery and Control of Succinimide Formation and Accumulation at Aspartic Acid Residues in The Complementarity-Determining Region of a Therapeutic Monoclonal Antibody.

PURPOSE: Succinimide formation and isomerization alter the chemical and physical properties of aspartic acid residues in a protein. Modification of aspartic acid residues within complementarity-determining regions (CDRs) of therapeutic monoclonal antibodies (mAbs) can be particularly detrimental to the efficacy of the molecule. The goal of this study was to characterize the site of succinimide accumulation in the CDR of a therapeutic mAb and understand its effects on potency. Furthermore, we aimed to mitigate succinimide accumulation through changes in formulation. METHODS: Accumulation of succinimide was identified through intact and reduced LC-MS mass measurements. A low pH peptide mapping method was used for relative quantitation and localization of succinimide formation in the CDR. Statistical modeling was used to correlate levels of succinimide with basic variants and potency measurements. RESULTS: Succinimide accumulation in Formulation A was accelerated when stored at elevated temperatures. A strong correlation between succinimide accumulation in the CDR, an increase in basic charge variants, and a decrease in potency was observed. Statistical modeling suggest that a combination of ion exchange chromatography and potency measurements can be used to predict succinimide levels in a given sample. Reformulation of the mAb to Formulation B mitigates succinimide accumulation even after extended storage at elevated temperatures. CONCLUSION: Succinimide formation in the CDR of a therapeutic mAb can have a strong negative impact on potency of the molecule. We demonstrate that thorough characterization of the molecule by LC-MS, ion exchange chromatography, and potency measurements can facilitate changes in formulation that mitigate succinimide formation and the corresponding detrimental changes in potency.

Development, validation, and implementation of a robust and quality control-friendly focused peptide mapping method for monitoring oxidation of co-formulated monoclonal antibodies.

Monoclonal antibody (mAb) coformulation containing two therapeutic proteins provides benefits of improved therapeutic efficacy and better patient compliance. Monitoring of the individual mAb stability in the coformulation is critical to ensure its quality and safety. Among post-translational modifications (PTMs), oxidation is often considered as one of the critical quality attributes (CQAs) as it potentially affects the structure and potency. Although hydrophobic interaction chromatography (HIC) and reversed phase liquid chromatography (RPLC) have been used to monitor overall protein oxidation, mass spectrometry of peptide digests resolved by LC methods can afford superior selectivity and sensitivity for specific PTMs. With the advent of the Quadrupole Dalton (QDa) mass spectrometer as an affordable add-on detector, implementation of targeted oxidation assays in development and quality control (QC) laboratories is now feasible. In this study, as the first effort to implement MS-based methods for antibody coformulation in QC laboratories, we developed and validated a high-throughput and robust focused peptide mapping method using QDa for simultaneous site-specific monitoring of oxidation of methionine and tryptophan residues in heavy-chain (HC) complementary determining regions (CDRs) of two co-formulated mAbs. The method was validated in terms of accuracy, precision, linearity, range, quantitation limit (QL), specificity, and solution stability per recommendations in ICH Q2. The method robustness was systematically assessed involving multiple sample preparation and instrument method parameters. The method met the validation criteria in GMP laboratories with excellent robustness and was implemented in both GMP and development environments.

Precise O-Glycosylation Site Localization of CD24Fc by LC-MS Workflows.

CD24Fc is a homodimeric recombinant Fc-fusion protein comprised of human CD24 connected to immunoglobulin G1 (IgG1) Fc fragment. CD24 is heavily glycosylated, and its biological function is considered mainly mediated by its glycosylation. Identification of the O-glycosylation sites would facilitate an in-depth understanding of the functional role of O-glycans in CD24. However, the presence of clustered mucin-type O-glycans together with N-glycans makes the determination of O-glycosylation sites and abundance very challenging. In this study, two sets of liquid chromatography-mass spectrometry (LC-MS) workflows were developed for the comprehensive characterization of O-glycosylation in CD24: (1) Fractionation and collision-induced dissociation (CID) workflow involving multienzyme digestion, fractionation, OpeRATOR/SialEXO digestion, and CID analysis; (2) Direct OpeRATOR/SialEXO digestion followed by electron-transfer/higher-energy collision dissociation (EThcD) analysis. The precise O-glycosylation sites were identified in CD24 for the first time, and the site occupancy was assessed. A total of 12 O-glycosylation sites were identified. Seven glycosylation sites were identified by both workflows, and five additional sites were identified only by the EThcD workflow. The predominant O-glycosylation site in CD24 was Thr25 followed by Thr15. The CID workflow provided an overall relative quantitation of O-glycoforms at the CD24 level and site localization for singly O-glycosylated peptides. The EThcD workflow directly identified glycosylation sites by tandem mass spectrometry (MS/MS) for singly, doubly, and triply O-glycosylated peptides. Together, both workflows validated each other's results and can be applied to a complex mucin-type O-glycosylation site analysis of other glycoproteins and Fc-fusion therapeutics.

Extended characterization of unpaired cysteines in an IgG1 monoclonal antibody by LC-MS analysis.

The development of comprehensive methods to characterize unpaired cysteines in monoclonal antibodies (mAbs) is very important for understanding structural heterogeneity, impurity, and stability. In this paper, unpaired cysteines observed in a therapeutic antibody (mAb1) were thoroughly studied by Liquid Chromatography-Mass Spectrometry (LC-MS) methods at the intact mAb, domain, and peptide levels. Three cysteine variants were observed at the intact mAb level with each variant containing two unpaired cysteines. Variants containing four or six unpaired cysteines were not observed. Domain analysis indicated that two Fab variants, each containing two unpaired cysteines, were present while the third variant contained two unpaired cysteines on the Fc region. Peptide mapping analysis localized the six unpaired cysteines to Cys22/Cys96, Cys146/Cys202, and Cys369/Cys427 in the heavy chain. No significant changes were observed for these unpaired cysteines in mAb1 under high pH and heat-stressed conditions. Structural analysis and molecular modeling revealed that these unpaired cysteines were buried inside the three-dimensional structure. The integrated LC-MS methods together with stress studies and structural analysis may potentially be applied to the analysis of unpaired cysteines in other mAbs.

Protein A does not induce allosteric structural changes in an IgG1 antibody during binding.

Affinity chromatography is widely used for antibody purification in biopharmaceutical production. Although there is evidence suggesting that affinity chromatography might induce structural changes in antibodies, allosteric changes in structure have not been well-explored. Here, we used hydrogen exchange-mass spectrometry (HX-MS) to reveal conformational changes in the NIST mAb upon binding with a protein A (ProA) matrix. HX-MS measurements of NIST mAb bound to in-solution and resin forms of ProA revealed regions of the CH2 and CH3 domains with increased protection from HX upon ProA binding, consistent with the known ProA binding region. In-solution ProA experiments revealed regions in the Fab with increased HX uptake when the ProA:mAb molar ratio was increased to 2:1, suggesting an allosterically induced increase in backbone flexibility. Such effects were not observed with lower ProA concentration (1:1 molar ratio) or when ProA resin was used, suggesting some kind of change in binding mode. Since all pharmaceutical processes use ProA bound to resin, our results rule out reversible allosteric effects on the NIST mAb during interaction with resin ProA. However, irreversible effects cannot be ruled out since the NIST mAb was previously exposed to ProA during its original purification.

The heme-regulatory motifs of heme oxygenase-2 contribute to the transfer of heme to the catalytic site for degradation.

Heme-regulatory motifs (HRMs) are present in many proteins that are involved in diverse biological functions. The C-terminal tail region of human heme oxygenase-2 (HO2) contains two HRMs whose cysteine residues form a disulfide bond; when reduced, these cysteines are available to bind Fe3+-heme. Heme binding to the HRMs occurs independently of the HO2 catalytic active site in the core of the protein, where heme binds with high affinity and is degraded to biliverdin. Here, we describe the reversible, protein-mediated transfer of heme between the HRMs and the HO2 core. Using hydrogen-deuterium exchange (HDX)-MS to monitor the dynamics of HO2 with and without Fe3+-heme bound to the HRMs and to the core, we detected conformational changes in the catalytic core only in one state of the catalytic cycle-when Fe3+-heme is bound to the HRMs and the core is in the apo state. These conformational changes were consistent with transfer of heme between binding sites. Indeed, we observed that HRM-bound Fe3+-heme is transferred to the apo-core either upon independent expression of the core and of a construct spanning the HRM-containing tail or after a single turnover of heme at the core. Moreover, we observed transfer of heme from the core to the HRMs and equilibration of heme between the core and HRMs. We therefore propose an Fe3+-heme transfer model in which HRM-bound heme is readily transferred to the catalytic site for degradation to facilitate turnover but can also equilibrate between the sites to maintain heme homeostasis.

Dynamic and structural differences between heme oxygenase-1 and -2 are due to differences in their C-terminal regions.

Heme oxygenase (HO) catalyzes heme degradation, a process crucial for regulating cellular levels of this vital, but cytotoxic, cofactor. Two HO isoforms, HO1 and HO2, exhibit similar catalytic mechanisms and efficiencies. They also share catalytic core structures, including the heme-binding site. Outside their catalytic cores are two regions unique to HO2: a 20-amino acid-long N-terminal extension and a C-terminal domain containing two heme regulatory motifs (HRMs) that bind heme independently of the core. Both HO isoforms contain a C-terminal hydrophobic membrane anchor; however, their sequences diverge. Here, using hydrogen-deuterium exchange MS, size-exclusion chromatography, and sedimentation velocity, we investigated how these divergent regions impact the dynamics and structure of the apo and heme-bound forms of HO1 and HO2. Our results reveal that heme binding to the catalytic cores of HO1 and HO2 causes similar dynamic and structural changes in regions (proximal, distal, and A6 helices) within and linked to the heme pocket. We observed that full-length HO2 is more dynamic than truncated forms lacking the membrane-anchoring region, despite sharing the same steady-state activity and heme-binding properties. In contrast, the membrane anchor of HO1 did not influence its dynamics. Furthermore, although residues within the HRM domain facilitated HO2 dimerization, neither the HRM region nor the N-terminal extension appeared to affect HO2 dynamics. In summary, our results highlight significant dynamic and structural differences between HO2 and HO1 and indicate that their dissimilar C-terminal regions play a major role in controlling the structural dynamics of these two proteins.

Hydrogen-Deuterium Exchange Mass Spectrometry to Study Protein Complexes.

Hydrogen-deuterium exchange (HDX) mass spectrometry (MS) can provide valuable information about binding, allostery, and other conformational effects of interaction in protein complexes. For protein-ligand complexes, where the ligand may be a small molecule, peptide, nucleotide, or another protein(s), a typical experiment measures HDX in the protein alone and then compares that with HDX for the protein when part of the complex. Multiple factors are critical in the design and implementation of such experiments, including thoughtful consideration of the percent protein bound, the effects of the labeling protocol on the protein complex, and the dynamic range of the analysis method. With careful planning and techniques, HDX MS analysis of protein complexes can be very informative.