RESUMO
Purpose: This paper investigates the biomechanical benefits of using hybrid constructs that combine cannulated screws with tension band wiring (TBW) cerclage compared to cannulated screws with anterior Variable Angle locking neutralisation plates (VA LNP). These enhancements can bear heavier loads and maintain the repaired patella's integrity, in contrast to traditional methods. Method: Eighteen fresh-frozen human cadaver patellae were carefully fractured transversely at their midpoints using a saw. They were then divided into two groups of nine for subsequent utilisation. Fixation methods included Cannulated Screw Fixation added with either TBW or VA LNP Fixation Technique. Cyclic loading simulations (500 cycles) were conducted to mimic knee motion, tracking fracture displacement with Optotrak. After that, the constructs were secured over a servo-hydraulic testing machine to determine the load-to-failure on axial mode. Results: The average fracture displacement for the anterior neutralisation plate group was 0.09 ± 0.12 mm, compared to 0.77 ± 0.54 mm for the tension band wiring with cannulated screw group after 500 cyclic loading. This result is statistically significant (p = 0.004). The anterior neutralisation plate group exhibited a mean load-to-failure of 1359 ± 21.53 N, whereas the tension band wiring group showed 780.1 ± 22.62 N, resulting in a significant difference between the groups (p = 0.007). Conclusion: This research highlights the superior biomechanical advantage of VA LNP over TBW for treating simple transverse patella fractures with two cannulated screws. It also highlights how the TBW is still a valuable option considering the load-to-failure limit. Level of Evidence: Not Applicable.
RESUMO
INTRODUCTION: The escalating incidence of anterior cruciate ligament (ACL) injuries, particularly among adolescents, is a pressing concern. The study of ACL biomechanics in this demographic presents challenges due to the scarcity of cadaveric specimens. This research endeavors to validate the adolescent porcine stifle joint as a fitting model for ACL studies. METHODS: We conducted experiments on 30 fresh porcine stifle knee joints. (Breed: Yorkshire, Weight: avg 90 lbs, Age Range: 2-4 months). They were stored at - 22 °C and a subsequent 24-h thaw at room temperature before being prepared for the experiment. These joints were randomly assigned to three groups. The first group served as a control and underwent only the load-to-failure test. The remaining two groups were subjected to 100 cycles, with forces of 300N and 520N, respectively. The load values of 300N and 520N correspond to three and five times the body weight (BW) of our juvenile porcine, respectively. RESULT: The 520N force demonstrated a higher strain than the 300N, indicating a direct correlation between ACL strain and augmented loads. A significant difference in load-to-failure (p = 0.014) was observed between non-cyclically loaded ACLs and those subjected to 100 cycles at 520N. Three of the ten samples in the 520N group failed before completing 100 cycles. The ruptured ACLs from these tests closely resembled adolescent ACL injuries in detachment patterns. ACL stiffness was also measured post-cyclical loading by applying force and pulling the ACL at a rate of 1 mm per sec. Moreover, ACL stiffness measurements decreased from 152.46 N/mm in the control group to 129.42 N/mm after 100 cycles at 300N and a more significant drop to 86.90 N/mm after 100 cycles at 520N. A one-way analysis of variance (ANOVA) and t-test were chosen for statistical analysis. CONCLUSIONS: The porcine stifle joint is an appropriate model for understanding ACL biomechanics in the skeletally immature demographic. The results emphasize the ligament's susceptibility to injury under high-impact loads pertinent to sports activities. The study advocates for further research into different loading scenarios and the protective role of muscle co-activation in ACL injury prevention.
Assuntos
Ligamento Cruzado Anterior , Joelho de Quadrúpedes , Suporte de Carga , Animais , Suínos , Ligamento Cruzado Anterior/fisiologia , Ligamento Cruzado Anterior/fisiopatologia , Joelho de Quadrúpedes/fisiologia , Joelho de Quadrúpedes/fisiopatologia , Suporte de Carga/fisiologia , Fenômenos Biomecânicos , Lesões do Ligamento Cruzado Anterior/fisiopatologia , Estresse Mecânico , Técnicas In VitroRESUMO
Introduction: The varus and valgus knee deformities result from imbalance in tension between medial and lateral soft tissue compartments. These conditions need to be addressed during total knee arthroplasty (TKA). However, there is no consensus on optimal soft-tissue release techniques for correcting varus and valgus deformities during TKA. We assessed the efficacy of a novel grid-based pie-crusting technique on soft-tissue release. Methods: Cadaver knees were dissected, leaving only the femur and tibia connected by an isolated MCL or the femur and fibula connected by an isolated LCL. Bone cuts were made as performed during primary TKA. Mechanical testing was performed using an MTS machine. A 3D-printed 12-hole grid was placed directly over the MCL and LCL. Using an 18-gauge needle, horizontal in-out perforations were made 3â mm apart. Deformation and stiffness of the ligaments were collected after every 2 perforations. Means were calculated, and regression analyses were performed. Results: A total of 7 MCL and 6 LCL knees were included in our analysis. The mean medial femorotibial (MFT) space increased from 6.018 ± 1.4â mm-7.078 ± 1.414â mm (R2 = 0.937) following 12 perforations. The mean MCL stiffness decreased from 32.15â N/mm-26.57â N/mm (R2 = 0.965). For the LCL group, the mean gap between the femur and ï¬bula increased from 4.287â mm-4.550â mm following 8 perforations. The mean LCL stiffness decreased from 29.955â N/mm-25.851â N/mm. LCL stiffness displayed a strong inverse relationship with the number of holes performed (R2 = 0.988). Discussion: Our results suggest that using this novel grid for pie-crusting of the MCL and LCL allows for gradual lengthening of the ligaments without sacrificing their structural integrity. Our proposed technique may serve as a valuable piece in the soft-tissue release toolkit for orthopaedic surgeons performing TKA in varus and valgus deformed knees.
RESUMO
Orthopedic surgery as a field is the least diverse medical specialty. Multiple factors contribute to the lack of diversity, including lack of diversity in medical school, lack of role models and mentors, and discrimination and bias. Addressing the lack of diversity includes use of data, implementation of targeted pipeline programs, individual physician advocacy, institutional recruitment and DEI initiatives, and leadership from professional organizations. Targeted pipeline programs and role models and mentors are very effective in increasing diversity. Cultural change is occurring, and the future orthopaedic workforce will be more diverse.
Assuntos
Procedimentos Ortopédicos , Ortopedia , HumanosRESUMO
BACKGROUND: Knowledge of acromioclavicular (AC) joint kinematics and distance may provide insight into the biomechanical function and development of new treatment methods. However, accurate data on in vivo AC kinematics and distance between the clavicle and acromion remain unknown. PURPOSE/HYPOTHESIS: The purpose of this study was to investigate 3-dimensional AC kinematics and distance during arm elevation in abduction, scaption, and forward flexion in a healthy population. It was hypothesized that AC kinematics and distance would vary with the elevation angle and plane of the arm. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 19 shoulders of healthy participants were enrolled. AC kinematics and distance were investigated with a combined dual fluoroscopic imaging system and computed tomography. Rotation and translation of the AC joint were calculated. The AC distance was measured as the minimum distance between the medial border of the acromion and the articular surface of the distal clavicle (ASDC). The minimum distance point (MDP) ratio was defined as the length between the MDP and the posterior edge of the ASDC divided by the anterior-posterior length of the ASDC. AC kinematics and distance between different elevation planes and angles were compared. RESULTS: Progressive internal rotation, upward rotation, and posterior tilt of the AC joint were observed in all elevation planes. The scapula rotated more upward relative to the clavicle in abduction than in scaption (P = .002) and flexion (P = .005). The arm elevation angle significantly affected translation of the AC joint. The acromion translated more laterally and more posteriorly in scaption than in abduction (P < .001). The AC distance decreased from the initial position to 75° in all planes and was significantly greater in flexion (P < .001). The MDP ratio significantly increased with the elevation angle (P < .001). CONCLUSION: Progressive rotation and significant translation of the AC joint were observed in different elevation planes. The AC distance decreased with the elevation angle from the initial position to 75°. The minimum distance between the ASDC and the medial border of the acromion moved anteriorly as the shoulder elevation angle increased. CLINICAL RELEVANCE: These results could serve as benchmark data for future studies aiming to improve the surgical treatment of AC joint abnormalities to restore optimal function.
Assuntos
Articulação Acromioclavicular , Articulação do Ombro , Humanos , Fenômenos Biomecânicos , Imageamento Tridimensional , Úmero , Escápula , Acrômio/diagnóstico por imagem , Articulação Acromioclavicular/diagnóstico por imagem , Articulação Acromioclavicular/cirurgia , Amplitude de Movimento ArticularRESUMO
Transverse patella fractures, accounting for approximately 1% of Orthopedic injuries, pose intricate challenges due to their vital role in knee mechanics. This study aimed to compare the biomechanical performance of a construct, integrating cannulated screws and an anterior locking neutralization plate, with the conventional tension band wiring technique for treating these fractures. Experimental testing and Finite Element Analysis were employed to evaluate the constructs and gain profound insights into their mechanical behavior. Sixteen cadaveric knees were prepared, and transverse patella fractures were induced at the midpoints using a saw. The plate construct and tension band wire fixation were randomly assigned to the specimens. A cyclic test evaluated the implants' durability and stability, simulating knee movement during extension and flexion. Tensile testing assessed the implants' maximum failure force after cyclic testing, while Finite Element Analysis provided detailed insights into stress distribution and deformation patterns. Statistical analysis was exclusively performed for the experimental data. Results showed the plate enhanced stability with significantly lower deformation (0.09 ± 0.12 mm) compared to wire fixation (0.77 ± 0.54 mm) after 500 cycles (p = 0.004). In tensile testing, the construct also demonstrated higher failure resistance (1359 ± 21.53 N) than wire fixation (780.1 ± 22.62N) (p = 0.007). Finite Element Analysis highlighted distinct stress patterns, validating the construct's superiority. This research presents a promising treatment approach for transverse patella fractures with potential clinical impact and future research prospects. This study presents a promising advancement in addressing the intricate challenges of transverse patella fractures, with implications for refining clinical practice. The construct's improved stability and resistance to failure offer potential benefits in postoperative management and patient outcomes.
Assuntos
Fraturas Ósseas , Traumatismos do Joelho , Fratura da Patela , Humanos , Análise de Elementos Finitos , Cadáver , Fraturas Ósseas/diagnóstico por imagem , Fraturas Ósseas/cirurgia , Fixação Interna de Fraturas/métodos , Parafusos Ósseos , Fios Ortopédicos , Patela/cirurgia , Patela/lesões , Fenômenos BiomecânicosRESUMO
Given the benefits of patient-reported outcome measure (PROM) implementation and future reporting policies, the PROMs Workgroup conducted a study to evaluate the sentiment and practice patterns related to PROM collection and utilization. A survey including questions regarding sentiment and practice patterns related to PROM importance, collection, and utilization was administered to all members. Data were reported descriptively, and open-ended responses were analyzed using content and frequency analysis. Six hundred twelve surgeons (4%) participated. Most of them (52%) feel that PROMs are important. Forty-six percent collect and 35% use PROMs in practice. The greatest barriers to adoption include concerns about staff burden (72%), challenges in patients completing PROMs (69%), and cost (47%). While most of the surgeons feel that PROMs are important, many do not collect nor use PROMs in practice. The identified barriers may be informative in the development of resources to help comply with mandates and use PROMs to improve patient care.
Assuntos
Cirurgiões Ortopédicos , Cirurgiões , Humanos , Estados Unidos , Medidas de Resultados Relatados pelo Paciente , Inquéritos e QuestionáriosRESUMO
Knee squatting was simulated to characterize the influence of medial patellofemoral ligament (MPFL) reconstruction on patellar tracking and contact pressures for knees with mild patella alta (Caton-Deschamps index = 1.3-1.4). Eight computational models represented knees in the pre-operative condition and following MPFL reconstruction. MPFL reconstruction significantly reduced patellar lateral tracking at low flexion angles based on bisect offset index, significantly decreased the maximum lateral pressure in mid-flexion, and significantly increased the maximum medial pressure in mid-flexion. MPFL reconstruction improves patellar stability for knees with mild patella alta and can reduce the pressure applied to lateral cartilage on the patella.
Assuntos
Instabilidade Articular , Articulação Patelofemoral , Humanos , Articulação Patelofemoral/diagnóstico por imagem , Articulação Patelofemoral/cirurgia , Patela/diagnóstico por imagem , Patela/cirurgia , Articulação do Joelho/cirurgia , Ligamentos Articulares/cirurgia , Amplitude de Movimento ArticularRESUMO
OBJECTIVE: To evaluate the effects of liposomal bupivacaine use for interscalene blocks on postoperative analgesia in total shoulder arthroplasty patients. METHODS: De-identified total or reverse total shoulder arthroplasty patients between 2018 and 2021 were analyzed. Patients were grouped into single shot interscalene block with liposomal bupivacaine (LB) with plain bupivacaine, other block (OB) with other local anesthetics (mepivacaine, ropivacaine, or plain bupivacaine), or no block (NB). The primary outcome was the proportion of patients with clinically tolerable pain scores (mean VAS ≤4) from 0 to 24 âh in each group. Secondary outcomes included averaged visual analog pain scores (VAS) and opioid consumption measured in morphine milligram equivalents (MMEs) from 0 to 24 âh. We also analyzed the proportion of patients with clinically tolerable pain, mean VAS, and opioid consumption from 0 to 72 âh in those patients with at least a 3-day hospital length of stay. RESULTS: A total of 491 de-identified total shoulder arthroplasty patients, 285 liposomal bupivacaine group (LB), 178 other block group (OB), and 28 no block group (NB), were analyzed. The primary outcome showed a statistically significant different proportion of patients with clinically tolerable pain from 0 to 24 âh in the LB group (69 â%) vs. OB group (39 â%) vs. NB group (11 â%) (<0.001). Secondary outcomes included statistically significant differences in VAS (LB median â= â3.35, OB median â= â4.38, NB median â= â5.25 (p â< â0.001, <0.001)) and total MME opioid consumption (LB median â= â40, OB median â= â60, NB median â= â88 (p â< â0.001, 0.001)) between groups from 0 to 24 âh. For patients who had hospital stays of at least 3 days, a significant association was found with having achieved clinically tolerable pain 0-72 âh and the LB group (51 â%) vs. OB group (21 â%) vs. NB group (11 â%) (P â= â0.006). However, there was no statistical difference in mean VAS or opioid consumption between these groups. CONCLUSION: A greater proportion of total shoulder arthroplasty patients that received liposomal bupivacaine in interscalene block have clinically tolerable pain scores from 0 to 24 âh, lower VAS, and lower MME consumption in patients following total shoulder arthroplasty. LEVEL OF EVIDENCE: Level III - Clinical Study.
Assuntos
Anestésicos Locais , Artroplastia do Ombro , Endrin/análogos & derivados , Humanos , Anestésicos Locais/uso terapêutico , Artroplastia do Ombro/efeitos adversos , Analgésicos Opioides/uso terapêutico , Dor Pós-Operatória/tratamento farmacológico , Dor Pós-Operatória/etiologia , Estudos Retrospectivos , Melhoria de Qualidade , Bupivacaína/uso terapêuticoRESUMO
BACKGROUND: This prospective, observational study was designed to assess the phenotype variation of the genes associated with pain and opioid use following total knee arthroplasty (TKA) in comparison to psycho-social elements. METHODS: Preoperative demographic data and Patient-Reported Outcomes Measurement Information System-43 scores were obtained on 305 elective TKA patients. Patient visual analog scale pain scores and opioid use were extracted from the hospital record. Following discharge, participants completed a daily log of visual analog scale pain score, and medications used over 30 days. Pharmacogenomic testing was performed for three genes, CYP2D6, COMT, and OPRM1, which are involved in the opioid pathway and pain modulation. RESULTS: Other than increased pain seen in the COMT high activity group while in the hospital, none of the phenotype variations of the three genes were significantly associated with the participants' pain or opioid use. The Patient-Reported Outcomes Measurement Information System-43 domains of pain interference and anxiety were significantly associated with pain and opioid use using multiple logistic regression. CONCLUSIONS: Pharmacogenomic testing in this study was not predictive of pain and opioid use following TKA compared with psycho-social variables.
RESUMO
Aims: The aim of this study was to establish consensus statements on the diagnosis, nonoperative management, and indications, if any, for medial patellofemoral complex (MPFC) repair in patients with patellar instability, using the modified Delphi approach. Methods: A total of 60 surgeons from 11 countries were invited to develop consensus statements based on their expertise in this area. They were assigned to one of seven working groups defined by subtopics of interest within patellar instability. Consensus was defined as achieving between 80% and 89% agreement, strong consensus was defined as between 90% and 99% agreement, and 100% agreement was considered to be unanimous. Results: Of 27 questions and statements on patellar instability, three achieved unanimous consensus, 14 achieved strong consensus, five achieved consensus, and five did not achieve consensus. Conclusion: The statements that reached unanimous consensus were that an assessment of physeal status is critical for paediatric patients with patellar instability. There was also unanimous consensus on early mobilization and resistance training following nonoperative management once there is no apprehension. The statements that did not achieve consensus were on the importance of immobilization of the knee, the use of orthobiologics in nonoperative management, the indications for MPFC repair, and whether a vastus medialis oblique advancement should be performed.
Assuntos
Traumatismos do Tornozelo , Cartilagem Articular , Instabilidade Articular , Articulação Patelofemoral , Humanos , Criança , Instabilidade Articular/diagnóstico , Instabilidade Articular/cirurgia , Técnica Delphi , Traumatismos do Tornozelo/cirurgia , Articulação do Tornozelo/cirurgia , Cartilagem Articular/cirurgiaRESUMO
Aims: The aim of this study was to establish consensus statements on medial patellofemoral ligament (MPFL) reconstruction, anteromedialization tibial tubercle osteotomy, trochleoplasty, and rehabilitation and return to sporting activity in patients with patellar instability, using the modified Delphi process. Methods: This was the second part of a study dealing with these aspects of management in these patients. As in part I, a total of 60 surgeons from 11 countries contributed to the development of consensus statements based on their expertise in this area. They were assigned to one of seven working groups defined by subtopics of interest. Consensus was defined as achieving between 80% and 89% agreement, strong consensus was defined as between 90% and 99% agreement, and 100% agreement was considered unanimous. Results: Of 41 questions and statements on patellar instability, none achieved unanimous consensus, 19 achieved strong consensus, 15 achieved consensus, and seven did not achieve consensus. Conclusion: Most statements reached some degree of consensus, without any achieving unanimous consensus. There was no consensus on the use of anchors in MPFL reconstruction, and the order of fixation of the graft (patella first versus femur first). There was also no consensus on the indications for trochleoplasty or its effect on the viability of the cartilage after elevation of the osteochondral flap. There was also no consensus on postoperative immobilization or weightbearing, or whether paediatric patients should avoid an early return to sport.
Assuntos
Instabilidade Articular , Luxação Patelar , Articulação Patelofemoral , Humanos , Criança , Instabilidade Articular/cirurgia , Luxação Patelar/cirurgia , Articulação Patelofemoral/cirurgia , Técnica Delphi , Articulação do Joelho/cirurgia , Ligamentos Articulares/cirurgiaRESUMO
Introduction: Current clinical practice suggests using patellar and quadriceps tendon autografts with a 10â mm diameter for ACL reconstruction. This can be problematic for patients with smaller body frames. Our study objective was to determine the minimum diameter required for these grafts. We hypothesize that given the strength and stiffness of these respective tissues, they can withstand a significant decrease in diameter before demonstrating mechanical strength unviable for recreating the knee's stability. Methods: We created a finite element model of the human knee with boundary conditions characteristic of the Lachman test, a passive accessory movement test of the knee performed to identify the integrity of the anterior cruciate ligament (ACL). The Mechanical properties of the model's grafts were directly obtained from cadaveric testing and the literature. Our model estimated the forces required to displace the tibia from the femur with varying graft diameters. Results: The 7â mm diameter patellar and quadriceps tendon grafts could withstand 55-60â N of force before induced tibial displacement. However, grafts of 5.34- and 3.76-mm diameters could only withstand upwards of 47â N and 40â N, respectively. Additionally, at a graft diameter of 3.76â mm, the patellar tendon experienced 234% greater stiffness than the quadriceps tendon, with similar excesses of stiffness demonstrated for the 5.34- and 7-mm diameter grafts. Conclusions: The patellar tendon provided a stronger graft for knee reconstruction at all diameter sizes. Additionally, it experienced higher maximum stress, meaning it dissociates force better across the graft than the quadriceps tendon. Significantly lower amounts of force were required to displace the tibia for the patellar and quadriceps tendon grafts at 3.76- and 5.34-mm graft diameters. Based on this point, we conclude that grafts below the 7â mm diameter have a higher chance of failure regardless of graft selection.
RESUMO
¼ After transplantation revascularization does occur although data are only available for animal models.¼ The time zero biomechanics, that is, the biomechanical properties at the time of transplant, of a meniscus allograft transplantation appear to appropriately mimic the original so long as the graft is sized correctly within 10% of the original and bone plug fixation is used.¼ Allograft type, that is, fresh vs. frozen, does not appear to affect the integration of the allograft.
Assuntos
Produtos Biológicos , Menisco , Humanos , Animais , Transplante Homólogo , Fenômenos Biomecânicos , AloenxertosRESUMO
BACKGROUND: Biomechanical testing of abduction moment arms presents a useful method to assess the contributions of individual rotator cuff muscles to glenohumeral function. This study aimed to investigate the changes in abduction moment arms after the treatment of supraspinatus tears with superior capsular reconstruction (SCR), bursal acromial reconstruction (BAR), and a combined SCR-BAR procedure, all with human dermal allograft. METHODS: We tested 7 fresh-frozen cadaveric specimens under 6 conditions: (1) intact, (2) 50% supraspinatus tear (partial tear), (3) 100% supraspinatus tear, (4) SCR, (5) SCR combined with BAR, and (6) BAR. In each condition, the moment arms for the individual muscles of the teres minor, subscapularis, and infraspinatus were calculated throughout 90° of abduction using a motion capture system. Analysis of variance and post hoc Tukey testing were performed to determine significance. RESULTS: In the teres minor, the moment arms in the SCR (11.9 mm), BAR (10.1 mm), and SCR-BAR (11.9 mm) conditions were greater than those in the intact (8.5 mm; P = .001, P = .001, and P = .001, respectively), partial tear (9.1 mm; P = .001, P = .128, and P = .001, respectively), and complete tear (8.8 mm; P = .001, P = .011, and P = .001, respectively) conditions. Similarly, in the subscapularis, the moment arms in the SCR (13.4 mm), BAR (13.8 mm), and SCR-BAR (13.5 mm) conditions were greater than those in the intact (10.6 mm; P = .006, P = .001, and P = .003, respectively) and partial tear (10.4 mm; P = .006, P = .001, and P = .003, respectively) conditions. In the teres minor, the SCR (11.9 mm) and SCR-BAR (11.9 mm) conditions were also found to have significantly increased moment arms compared with the BAR condition (10.1 mm; P = .001 and P = .001, respectively). In the infraspinatus, the BAR condition (13.8 mm) was found to have a significantly decreased moment arm compared with the partial tear condition (15.8 mm, P = .026), with no other significant findings between conditions. CONCLUSION: Our results suggest that the moment arm contributions of the individual muscles comprising the rotator cuff can change after reconstruction to compensate for tears. SCR and SCR-BAR increase the moment arms in the teres minor and subscapularis, potentially allowing for increased abduction ability.
RESUMO
PURPOSE: To provide a biomechanical comparison between human dermal (HD) allograft and long head of biceps tendon (LHBT) autograft with and without posterior side-to-side suturing for superior capsule reconstruction. METHODS: Eight fresh-frozen cadaveric shoulder specimens were tested in 5 conditions: (1) intact, (2) complete supraspinatus tear, (3) LHBT, (4) LHBT with side-to-side suturing, and (5) HD allograft with side-to-side suturing. Functional abduction force, superior translation of humeral head, translational range of motion, and rotational range of motion were tested at 0°, 30°, 60°, and 90° of abduction within each condition. Data were analyzed using analysis of variance with post-hoc Tukey testing for pairwise comparison, with a significance value set at .05. RESULTS: Functional abduction force in the LHBT, LHBT + suture, and HD + suture conditions was significantly increased compared with the supraspinatus tear condition at abduction angles of 30° (P = .011, .001, and .017, respectively), 60° (P = .004, .001, and .002, respectively), and 90° (P = .013, .001, and .038, respectively). In addition, superior translation of the humeral head in the LHBT, LHBT + suture, and HD + suture conditions was significantly decreased compared with the tear condition at abduction angles of 30° (P = .03, .049, .03, respectively) and 60° (P = .02, .04, .03, respectively). All 3 reconstructive techniques were statistically identical to the intact rotator cuff condition in regard to translational and rotational range of motion. CONCLUSIONS: Superior capsule reconstruction with LHBT autograft without side-to-side suturing, LHBT with posterior side-to-side suturing, and HD allograft with posterior side-to-side suturing all equivalently restore functional abduction force and decrease superior translation of the humeral head after a complete supraspinatus tear. CLINICAL RELEVANCE: Superior capsule reconstruction with long head of the biceps tendon autograft and human dermal allograft both restore functional abduction force and decrease superior translation of the humeral head, while displaying no losses in the range of motion in a cadaveric model.
Assuntos
Lesões do Manguito Rotador , Articulação do Ombro , Humanos , Lesões do Manguito Rotador/cirurgia , Autoenxertos , Articulação do Ombro/cirurgia , Ruptura/cirurgia , Aloenxertos , Cadáver , Fenômenos Biomecânicos , Amplitude de Movimento ArticularRESUMO
BACKGROUND: Distal triceps ruptures are rare, and complete ruptures are commonly treated with surgery. Studies of patients in small cohorts with distal triceps tear have reported outcomes and risk factors; however, large-scale data are scant. This study seeks to determine current trends, outcomes, and risk factors of distal triceps tears. METHODS: Within a large insurance claims database, distal triceps repair patients were identified through Current Procedural Terminology coding with concomitant distal triceps International Classification of Diseases, 9th Revision/10th Revision diagnosis codes and 1-year active status before and after surgery. Demographics, total costs, 90-day complications, and revision rates within 1 year of index surgery were analyzed. Logistic regression was performed for revision and complication rates using sex, age, and comorbidities (anabolic steroid use, diabetes, ischemic heart disease, tobacco use, rheumatoid arthritis, and chronic kidney disease). RESULTS: A total of 8143 patients were included in the cohort. Male patients and patients aged 40 to 59 years comprised most of the study population. The postoperative complication rate was 5.8%, and the 1-year revision rate was 2.6%. Male sex, age >60 years, ischemic heart disease, rheumatoid arthritis, and chronic kidney disease were statistically significant risk factors for higher 90-day complication rates. Anabolic steroid use significantly increased the risk of surgical revision. CONCLUSIONS: Distal triceps repairs in this large cohort study occur most frequently in men aged 40 to 59 years. Complications are generally low, with age >60 years, male sex, ischemic heart disease, rheumatoid arthritis, and chronic kidney disease as risk factors for 90-day complications and prior anabolic steroid use as a risk factor for 1-year revision surgery. This information can help to improve education and expectations of this procedure.
Assuntos
Artrite Reumatoide , Articulação do Cotovelo , Isquemia Miocárdica , Insuficiência Renal Crônica , Traumatismos dos Tendões , Humanos , Masculino , Articulação do Cotovelo/cirurgia , Estudos de Coortes , Traumatismos dos Tendões/cirurgia , Estudos Retrospectivos , Ruptura/cirurgia , Fatores de Risco , Resultado do TratamentoAssuntos
Instabilidade Articular , Luxação do Ombro , Articulação do Ombro , Humanos , Ontário , Correio Eletrônico , OmbroRESUMO
PURPOSE: This study aimed to investigate clinical and radiological results of arthroscopic repair for isolated medial degenerative meniscus tears (DMTs) in patients over 45 years old at a minimum 2-year follow-up. METHODS: From 2013 to 2017, patients aged over 45 years with isolated medial DMT refractory to conservative management or with true mechanical symptoms who had undergone arthroscopic repair were retrospectively reviewed. Arthroscopic meniscus repair was performed using all-inside or all-inside and inside-out technique in combination with bone marrow venting procedure. Tear patterns were classified according to arthroscopic findings. Magnetic resonance imaging (MRI) and outcome evaluations, including Lysholm score, Tegner activity score, and International Knee Documentation Committee (IKDC) score, were evaluated preoperatively and at the final follow-up. International Cartilage Repair Society grades of the medial compartments and MRI signal at tear sites were assessed preoperatively and at the final follow-up. A grade 0 to 2 signal at the repair site suggested a healed meniscus, whereas a grade 3 signal suggested an unhealed meniscus. Clinical failure was determined according to Barrett criteria. RESULTS: Twenty-seven patients (mean age, 57.7 ± 7.4 years) were enrolled. The mean follow-up was 52.0 ± 15.6 months. Among tear patterns, 48% were complex tears, 30% were horizontal tears, and 22% were other patterns. The mean Lysholm score and IKDC score significantly improved from 53 ± 25 to 89 ± 15 (p < 0.001) and 34 ± 24 to 72 ± 15 (p < 0.001) at the final follow-up, respectively. The median Tegner activity score significantly improved from 1 (range 1-4) to 4 (range 2-7, p < 0.001). Three (11%) patients were considered clinical failures, and five patients (19%) had cartilage lesion progression. At the final follow-up, MRI showed grade 0 in one (4%) patient, grade 1 in nine (33%) patients, grade 2 in six (22%) patients, and grade 3 in eleven (41%) patients. CONCLUSION: Arthroscopic repair of isolated medial DMT refractory to conservative management or with true mechanical symptoms in patients aged over 45 years had good to excellent clinical outcomes with low clinical failure rates, despite unhealed menisci being observed on MRI in 41% of patients at a mean 4.3-year follow-up. Arthroscopic repair could be a treatment option for these patients. LEVEL OF EVIDENCE: IV.