Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 31
Filtrar
1.
Clin Implant Dent Relat Res ; 23(3): 444-455, 2021 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-33949108

RESUMO

BACKGROUND: Radiotherapy aggravates implant-based prosthetic rehabilitation in patients with head and neck cancer. PURPOSE: To evaluate the impact of radiation dose at implant and parotid gland site for prosthetic rehabilitation. MATERIAL AND METHODS: The retrospective study includes 121 irradiated head and neck cancer patients with 751 inserted implants. Radiation doses on implant bed and parotid gland site were recorded by 3-dimensional modulated radiation plans. Implant success was clinically and radiographically evaluated according to modified Albrektsson criteria and compared to treatment- and patient-specific data. RESULTS: Implant overall survival after 5 years was 92.4% with an implant success rate of 74.9%. Main reasons for implant failure were marginal bone resorption (20.9%), implant not in situ or unloaded (9.6%) and peri-implantitis (7.5%). A mean radiation dose of 62.6 Gy was applied with a mean parotid dose of 35 Gy. Modulating radiation techniques went along with lower grades of xerostomia (p < 0.001). At implant site mean doses of 57.5, 42.0, and 32.3 Gy were recorded for oral, oropharyngeal, and hypopharyngeal/laryngeal carcinoma, respectively. Implant success inversely correlated to radiation dose at implant site. Strong predictors for implant failure in uni- and multivariate analysis were implant-specific dose >50 Gy (HR 7.9), parotid dose >30 Gy (HR 2.3), bone (HR 14.5) and soft tissue (HR 4.5) transplants, bad oral hygiene (HR 3.8), nonmodulated radiation treatment planning (HR 14.5), and nontelescopic prosthetics (HR 5.2). CONCLUSION: Radiotherapy impedes implant success in a dose-dependent manner at implant site. Modern radiation techniques effectively reduce xerostomia favoring implant-based prosthetic rehabilitation. Implantation in bone grafts is more critical and telescopic-retained overdentures should be preferred.


Assuntos
Implantes Dentários , Neoplasias de Cabeça e Pescoço , Radioterapia Conformacional , Estudos de Coortes , Neoplasias de Cabeça e Pescoço/radioterapia , Neoplasias de Cabeça e Pescoço/cirurgia , Humanos , Doses de Radiação , Estudos Retrospectivos
2.
Clin Oral Investig ; 24(9): 3039-3047, 2020 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-31832793

RESUMO

OBJECTIVES: Definition of implant success is unclear in prosthetic implant-based rehabilitation of head neck cancer patients. MATERIALS AND METHODS: Fifty-two patients with 309 inserted implants were included in this prospective observational study. Implant survival (in situ and loaded) and implant success (modified Albrektsson criteria) at 2-year follow-up were evaluated under the influence of patient- and implant-specific variables. RESULTS: Thirty-nine patients with 234 implants finished the study. Overall implant survival after 2 years was 92.3% (216/234) with an osseointegration rate of 94% (220/234). Implant success was 78.6% (184/234). Main reasons for failure were "bone resorption > 1.7mm" (n = 27, 11.5%) and "implant not in situ or not loaded" (n = 18, 7.7%). Smoking (OR 3.1, p = 0.034), bone grafts (OR 2.4, p = 0.021) and radiation dose > 60 Gy (OR 3.8, p = 0.025) revealed as significant predictors for implant failure. CONCLUSION: Implant survival differs significantly from implant success in head and neck cancer patients. Implant success is mainly determined by radiographic peri-implant bone resorption. CLINICAL RELEVANCE: Dealing with head and neck cancer patients a higher amount of peri-implant bone resorption must be taken into account and warrants for intensified implant monitoring.


Assuntos
Perda do Osso Alveolar , Implantes Dentários , Neoplasias de Cabeça e Pescoço , Implantação Dentária Endóssea , Prótese Dentária Fixada por Implante , Falha de Restauração Dentária , Seguimentos , Neoplasias de Cabeça e Pescoço/reabilitação , Neoplasias de Cabeça e Pescoço/cirurgia , Humanos , Estudos Prospectivos , Resultado do Tratamento
3.
J Mech Behav Biomed Mater ; 101: 103431, 2020 01.
Artigo em Inglês | MEDLINE | ID: mdl-31585349

RESUMO

The aim of the current study was to relate an artificial aging protocol for the analysis of dental materials to their clinical performance. 20 fixed interim restorations (crowns and fixed denture prostheses (FDPs)) fabricated from two commercially available resin-based composites (RBCs) and a previous clinical trial served as templates for the fabrication of duplicate restorations. Duplicates were subjected to artificial aging using thermal cycling and mechanical loading. Subsequent to wear analysis, templates and duplicates were loaded to fracture and were examined using thermal gravimetric analysis (TG) and differential scanning calorimetry (DSC). For both RBCs, a relevant uptake of water was identified, which was more pronounced in the duplicates. Tribological analyses indicated relevant signs of wear in both templates and duplicates. While qualitative analyses indicated macroscopically similar wear traces in templates and duplicates, data showed that wear of FDPs was underrated in the laboratory analyses. The results of the current study suggest that chewing simulation allows a proper estimation of aging processes in materials for the fabrication of fixed interim restorations. However, simulation parameters should be continuously improved using data derived from clinical settings to enhance the quality of the simulation protocols.


Assuntos
Ensaios Clínicos como Assunto , Prótese Parcial Fixa , Laboratórios , Resinas Sintéticas , Humanos , Temperatura , Fatores de Tempo , Água/química
4.
J Oral Sci ; 61(2): 270-275, 2019 Jun 18.
Artigo em Inglês | MEDLINE | ID: mdl-30930357

RESUMO

This study investigated the handling properties and clinical performance of two commercially available resin materials with slight differences in filler composition for the fabrication of fixed interim restorations. In a dental university setting, patients requiring prosthetic treatment were supplied with fixed interim restorations fabricated from two commercially available resin materials. To clarify the handling properties of the resin materials, dentists and undergraduate students completed a questionnaire. Prior to insertion of the definitive restoration, the interim restorations were analyzed by calibrated examiners using a modification of the United States Public Health Service criteria. Eighty-two fixed interim restorations with a mean clinical service period of 44.5 (±28.3) days were included, including 39 single crowns, 30 fixed denture prostheses, 10 blocked crowns, and 3 partial coverage restorations. No significant differences between the two materials in the rating of their handling properties were identified, with the exception of the parameter "surface". Failures due to fractures were observed in 13% of the interim restorations. No significant differences between the materials in the rating of the clinical performance were identified. These results indicate that slight changes in the filler composition of commercial formulations account for few differences in handling properties and clinical performance.


Assuntos
Coroas , Prótese Parcial Fixa , Falha de Restauração Dentária , Planejamento de Dentadura , Humanos
5.
Clin Oral Investig ; 19(1): 53-60, 2015 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-24578230

RESUMO

OBJECTIVES: This study investigated toothbrush abrasion and in vitro aging on ceramic (indirect technique) and composite veneers (direct technique). MATERIALS AND METHODS: Identical composite and individual human incisors were restored with industrially preformed composite veneers, indirectly produced ceramic veneers, and direct composite restorations. Surface roughness was determined before and after tooth brushing. A 5-year period of oral service was simulated by thermal cycling and mechanical loading (TCML). After TCML, all specimens were examined with microscopy and scanning electron microscopy. Specimens without failures during TCML were loaded until failure. STATISTICS: analysis of variance; Bonferroni's post hoc analysis, Kaplan-Meier-Log Rank test (α = 0.05). RESULTS: Tooth brushing yielded a non-significant increase (p = 0.560) in roughness in all materials (industrial veneer, 0.12+/-0.07 µm, direct restoration, 0.18+/-0.14 µm, ceramic, 0.35+/-0.16 µm). No significant differences in roughness could be determined between the materials, neither before nor after testing (p < 0.001). After TCML of artificial teeth, direct and preformed composite veneers on composite teeth showed no failures or damages. Two ceramic veneers showed cracking in the labial area. After TCML of human teeth, transmission microscopy indicated a facial crack in a ceramic veneer and chipping in the cervical area of a preformed veneer. Two direct composite veneers lost retention. No significantly different survival rates were found between the three veneer groups. Fracture force on human teeth varied between 527.8+/-132.4 N (ceramic), 478.3+/-165.4 N (preformed composite), and 605.0+/-263.5 N (direct composite). CONCLUSION: All materials revealed comparable wear resistance. Indirect ceramic, direct restorative composite, and preformed composite veneers showed comparable failure rates and satisfying longevity. CLINICAL RELEVANCE: The results indicate similar longevity of the chosen materials for veneer restorations.


Assuntos
Restauração Dentária Permanente/métodos , Facetas Dentárias , Abrasão Dentária/etiologia , Abrasão Dentária/terapia , Escovação Dentária/efeitos adversos , Cerâmica/química , Resinas Compostas/química , Falha de Restauração Dentária , Análise do Estresse Dentário , Humanos , Técnicas In Vitro , Incisivo , Microscopia Eletrônica de Varredura , Distribuição Aleatória , Propriedades de Superfície
6.
Clin Oral Investig ; 19(3): 739-44, 2015 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-25096670

RESUMO

OBJECTIVES: This study aims to test the influence of different surface treatments and conditioning on the shear bond strength between polyetherketone (PEEK) and composite. MATERIALS AND METHODS: Surfaces (570 plates) were used untreated, etched, air-particle abraded or activated with silica-modified alumina oxide. Surface roughness was determined after different treatments. Cylinders of composite were polymerized onto the surfaces. Eighteen different pre-treatment combinations were applied, partly combined with opaque application. Shear bond strength (SBS) was determined following ISO TR 11405. Baseline tests were performed 24 h after composite polymerization. For investigating the influence of storage and aging, the specimens were either stored in distilled water (37 °C, 90 days) or thermally cycled (12,000 cycles 5 °C/55 °C, distilled water). Means and standard deviations were calculated (statistics: one-way ANOVA/Bonferroni (α = 0.05)). RESULTS: Surface roughness varied between 0.04 ± 0.01 and 6.76 ± 1.11 µm. Only etching caused a significant (p < 0.001) increase. SBS strongly varied between 0.0 ± 0.0 and 23.2 ± 2.1 MPa. After thermal cycling (TC), nine of the investigated systems showed SBS higher than 5 MPa, varying from 8.8 ± 2.7 MPa (#7) to 19.4 ± 2.5 MPa (#4). After water storage, nine systems provided SBS higher than 5 MPa, seven even values higher than 10 MPa. Maximum SBS was 27.1 ± 3.1 MPa (#2) and lowest value was 5.4 ± 2.6 MPa (#4). Significant (p < 0.001) differences were found between the individual systems after 24 h, TC and after 90 days storage. CONCLUSIONS: For good bonding between PEEK and composite, cleaning and roughening is recommended. Surface conditioning prior to bonding seems essential. Combination with opaque revealed an increase in SBS. CLINICAL RELEVANCE: Successful bonding on PEEK surfaces can be achieved by surface roughening and subsequent surface activation with acetone- or phosphate-based methacrylate primers or tribochemical treatment.


Assuntos
Resinas Compostas/química , Colagem Dentária/métodos , Facetas Dentárias , Cetonas/química , Polietilenoglicóis/química , Benzofenonas , Análise do Estresse Dentário , Teste de Materiais , Polímeros , Resistência ao Cisalhamento , Propriedades de Superfície
7.
Clin Oral Investig ; 18(3): 891-900, 2014 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-23846213

RESUMO

OBJECTIVES: The aim was to investigate the influence of cusp inclinations and curvatures on the failure behaviour and fracture resistance of veneered zirconia crowns. MATERIALS AND METHODS: Five groups (n = 8/group) of zirconia-based molar crowns were fabricated by modifying cusp inclination (S, steep = 45°; M, medium = 30°; F, flat = 10°) and curvature (P, pointed; R, round; O, round-oblate). Combinations MP, MR, SP, SR and FO were investigated. All crowns were fixed on polymethylmethacrylate teeth, thermally cycled and mechanically loaded. Failures were monitored and fracture resistance was determined after ageing. Crowns were fractographically analysed with scanning electron microscopy. RESULTS: Chipping during thermal cycling and mechanical loading (TCML) was observed in groups MR (1×), SP (6×) and SR (3×). Defect sizes varied between 0.12 mm(2) (MR) and 17.28 mm(2) (SP). Failures started from occlusal contacts. Mean fracture varied significantly between 1,354.2 ± 360.0 N (SR) and 3,155.8 ± 444.4 N (FO). CONCLUSIONS: Cusp inclination and curvature influenced failures during TCML and fracture loads. Crowns with medium cusp inclination and pointed or round curvature are recommended for clinical application as they revealed high resistance to chipping. Steep inclination, especially in combination with pointed curvature, was shown to increase chipping rates and areas and to decrease fracture force. CLINICAL RELEVANCE: The results show the necessity of considering design parameters of the veneer in order to reduce failures of zirconia-based crowns.


Assuntos
Coroas , Facetas Dentárias , Zircônio , Técnicas In Vitro
8.
Int J Prosthodont ; 25(2): 138-44, 2012.
Artigo em Inglês | MEDLINE | ID: mdl-22371834

RESUMO

PURPOSE: This retrospective study investigated the survival rate of 174 clasp-retained removable partial dentures (CR-RPDs) made at the Department of Prosthodontics of the Regensburg University Medical Center over a 25-year period (1984 to 2009). MATERIALS AND METHODS: The study analyzed the frequency of and time to the fracture of clasps, connectors, or denture bases; the occurrence of caries or periodontal lesions; the loss of abutment teeth; and the necessity of maintenance procedures such as relining or treatment of pressure areas. RESULTS: The median follow-up time of 3 years was calculated using the inverse Kaplan-Meier method. The 5-year survival rate (time to renewal) of all CR-RPDs was 96.4%; the 10-year survival rate was 89.8%. Fractures most frequently occurred in clasps (n = 28, 16.1%) followed by major connectors (n = 9, 5.1%) and minor connectors (n = 6, 3.4%). The 5-year event-free rate for clasp fracture was 80.4%; the 10-year event-free rate was 76.9%. Caries lesions on abutment teeth were seen in 31.6% of patients, and 35.6% showed inflammation of the periodontal tissue surrounding the abutment teeth. The 5-year event-free rate for caries was 58.4%; the 10-year rate was 39.6%. A frequent complication was loss of abutment teeth (n = 15), but this complication was not age-dependent. After insertion of their prostheses, one-third of patients (n = 53, 30.5%) showed pressure areas of the mucosa. Significantly more (P < .001) pressure areas were caused by prostheses of the mandible (39.6%) than by those of the maxilla (12.5%). CONCLUSIONS: CR-RPDs showed a survival rate of approximately 90% after 10 years of oral service. The predominant complications during oral service were caries lesions, loss of abutment teeth, and fracture of clasps.


Assuntos
Grampos Dentários , Prótese Parcial Removível , Dente Suporte , Cárie Dentária/classificação , Falha de Restauração Dentária , Bases de Dentadura , Reembasamento de Dentadura , Feminino , Seguimentos , Humanos , Arcada Parcialmente Edêntula/classificação , Arcada Parcialmente Edêntula/reabilitação , Masculino , Mandíbula , Maxila , Pessoa de Meia-Idade , Periodontite/classificação , Estudos Retrospectivos , Análise de Sobrevida , Perda de Dente/classificação
9.
Clin Oral Investig ; 16(3): 935-43, 2012 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-21739199

RESUMO

The aim of this in vitro study was to investigate the two-body wear of different ceramics. Two-body wear tests were performed in a chewing simulator with steatite and enamel antagonists, respectively. Specimens were loaded in a pin-on-block design with a vertical load of 50 N for 1.2 × 10(5) cycles; (f = 1.6 Hz; lateral movement, 1 mm; mouth opening: 2 mm). Human enamel was used as a reference. Three zirconia ceramics, three veneering porcelains, two glass-infiltrated and one lithium disilicate ceramic were investigated. Veneering and lithium disilicate ceramics were glazed before testing. Surface roughness Ra (SP6, Perthen-Feinprüf, G) and wear depth were determined using a 3D scanner (Laserscan 3D, Willytec, G). SEM (Quanta FEG 400, FEI, USA) pictures of the worn specimens and antagonists were made for evaluating wear performance. Veneering porcelain provided wear traces between 71.2 and 124.1 µm (enamel antagonist) and 117.4 and 274.1 µm (steatite). Wear of the steatite antagonists varied between 0.618 and 2.85 mm². No wear was found for zirconia and glass-infiltrated substructure ceramics. Also, no wear was found for the corresponding antagonists. Wear of specimens and antagonists was strongly material dependent. No visible wear was found on zirconia and glass-infiltrated ceramics. Porcelain and lithium disilicate ceramic showed a comparable or lower wear than the enamel reference. Antagonist wear was found to be lower when specimens were made of substructure oxide ceramics instead of veneering porcelain. From the point of wear testing, zirconia may be used for the fabrication of fixed dental prosthesis without veneering.


Assuntos
Esmalte Dentário , Porcelana Dentária , Desgaste de Restauração Dentária , Desgaste dos Dentes , Óxido de Alumínio , Análise de Variância , Análise do Estresse Dentário , Humanos , Óxido de Magnésio , Mastigação , Microscopia Eletrônica de Varredura , Dióxido de Silício , Estatísticas não Paramétricas , Zircônio
10.
Clin Oral Investig ; 16(1): 319-23, 2012 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-21181215

RESUMO

The study examined the bond between different denture base resins and highly cross-linked acrylic denture teeth with different base surface-conditioning methods. One hundred fifty highly cross-linked resin denture teeth (SR-Antaris, No. 11, Ivoclar-Vivadent, FL) were divided into five groups with different surface-conditioning methods of the base surfaces of the teeth (C = control, no surface conditioning, MM = application of methyl methacrylate monomer, SB = sand blasting, SBB = sand blasting + bonding agent, TSS = tribochemical silica coating + silanization). Teeth were bonded to either a cold-cured denture base resin (ProBase Cold, Ivoclar-Vivadent, FL) or heat-cured denture base resins (SR Ivocap Plus, Ivoclar-Vivadent, FL and Lucitone 199, Dentsply, USA). After 24 h of storage in distilled water, compressive load was applied at 90° on the palatal surface of each tooth until fracture. Median failure load ranged between 103 and 257 N for Probase Cold groups, 91 to 261 N for Lucitone 199, and 149 to 320 N for SR Ivocap Plus. For Probase Cold, significant highest failure loads resulted when teeth were treated with SB, SBB, or TSS. For Lucitone 199, significant highest failure loads has been found with MM and TSS treatment. For SR Ivocap Plus, highest failure loads resulted using SBB and TSS. Conditioning of the base surfaces of the teeth prior to denture base processing is highly recommended. Tooth bond is significantly affected by the surface-conditioning method and applied denture base resin. Tribochemical silica coating + silanization method can be recommended for pre-treatment of teeth applying either heat-cured or cold-cured denture base resin.


Assuntos
Resinas Acrílicas/química , Colagem Dentária , Materiais Dentários/química , Bases de Dentadura , Dente Artificial , Óxido de Alumínio/química , Corrosão Dentária/métodos , Falha de Restauração Dentária , Análise do Estresse Dentário/instrumentação , Humanos , Teste de Materiais , Metilmetacrilato/química , Polimetil Metacrilato/química , Silanos/química , Dióxido de Silício/química , Estresse Mecânico , Propriedades de Superfície , Temperatura , Fatores de Tempo , Água/química
11.
Ann Anat ; 194(2): 216-9, 2012 Mar 20.
Artigo em Inglês | MEDLINE | ID: mdl-22035706

RESUMO

Bruxism is characterized by non-functional contact of mandibular and maxillary teeth resulting in clenching or grating of teeth. Theories on factors causing bruxism are a matter of controversy in current literature. The dental profession has predominantly viewed peripheral local morphological disorders, such as malocclusion, as the cause of clenching and gnashing. This etiological model is based on the theory that occlusal maladjustment results in reduced masticatory muscle tone. In the absence of occlusal equilibration, motor neuron activity of masticatory muscles is triggered by periodontal receptors. The second theory assumes that central disturbances in the area of the basal ganglia are the main cause of bruxism. An imbalance in the circuit processing of the basal ganglia is supposed to be responsible for muscle hyperactivity during nocturnal dyskinesia such as bruxism. Some authors assume that bruxism constitutes sleep-related parafunctional activity (parasomnia). A recent model, which may explain the potential imbalance of the basal ganglia, is neuroplasticity. Neural plasticity is based on the ability of synapses to change the way they work. Activation of neural plasticity can change the relationship between inhibitory and excitatory neurons. It seems obvious that bruxism is not a symptom specific to just one disease. Many forms (and causes) of bruxism may exist simultaneously, as, for example, peripheral or central forms.


Assuntos
Bruxismo/fisiopatologia , Gânglios da Base/fisiopatologia , Bruxismo/etiologia , Bruxismo/patologia , Sistema Nervoso Central/fisiopatologia , Gengiva/inervação , Gengiva/fisiologia , Humanos , Má Oclusão/complicações , Músculos da Mastigação/inervação , Músculos da Mastigação/fisiopatologia , Neurônios Motores/fisiologia , Plasticidade Neuronal/fisiologia , Parassonias/fisiopatologia , Sistema Nervoso Periférico/fisiopatologia , Dente/fisiopatologia , Anormalidades Dentárias/patologia
12.
Int J Prosthodont ; 24(5): 465-8, 2011.
Artigo em Inglês | MEDLINE | ID: mdl-21909489

RESUMO

PURPOSE: The influence of resilient support of abutment teeth on the fracture resistance of all-ceramic three-unit fixed partial dentures (FPDs) was tested in this study. MATERIALS AND METHODS: Three groups (n = 8) of glass-infiltrated, alumina-based, all-ceramic FPDs that were adhesively bonded to human molar teeth were investigated. In control group A, teeth that were rigidly inserted in polymethyl methacrylate (PMMA) resin were used for thermocycling and mechanical loading (TCML), as well as for fracture testing. In group B, TCML was conducted on teeth that had their roots covered with a polyether layer. After TCML, the polyether layer was removed entirely, and the teeth were rigidly fixed in PMMA for fracture testing. In group C, teeth roots remained covered with a polyether layer during TCML as well as during fracture testing. Using a resilient attachment, tooth mobility was determined in axial, buccal, and oral directions. RESULTS: Mean tooth mobility was 76 ± 4 Μm in the axial direction, 278 ± 41 Μm in the buccal direction, and 128 ± 17 Μm in the oral direction. Group C showed the lowest mean fracture strength (polyether during both TCML and fracture testing) of 523 N. For group B (polyether during TCML but not during fracture testing), a fracture strength of 676 N was found, and for control group A (rigidly embedded teeth), it was 919 N. CONCLUSION: These results confirmed the influence of resilient attachments on the aging process and fracture strength testing of FPDs. Fracture resistance was significantly reduced when this particular interface was used in both TCML and fracture testing.


Assuntos
Dente Suporte , Porcelana Dentária , Falha de Restauração Dentária , Análise do Estresse Dentário/métodos , Prótese Parcial Fixa , Óxido de Alumínio , Força de Mordida , Temperatura Alta , Humanos , Dente Molar/fisiologia , Ligamento Periodontal/fisiologia , Estatísticas não Paramétricas , Estresse Mecânico , Mobilidade Dentária/fisiopatologia
13.
Dent Mater ; 27(8): 796-804, 2011 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-21524788

RESUMO

AIM: The aim of this in vitro study was to compare the two-body wear resistance of substructure zirconia and veneering porcelain versus steatite and human enamel antagonists, respectively. MATERIALS AND METHODS: Two-body wear tests were performed in a chewing simulator with steatite and enamel antagonists (enamel cusps). A pin-on-block design with a vertical load of 50 N for 1.2 × 10(5) cycles; (f=1.6 Hz; lateral movement: 1mm, mouth opening: 2mm) was used for the wear test. For quantification of the wear resistance, wear tests were performed with standardized steatite spheres. Human enamel was used as a reference. Five zirconia ceramics and four veneering porcelains were investigated. One zirconia ceramic was tested with superficial glaze, which was applied after polishing or sandblasting, respectively. Surface roughness R(a) (SP6, Perthen-Feinprüf, G) and wear depth were determined using a 3D-Profilometer (Laserscan 3D, Willytec, G). SEM (Quanta FEG 400, FEI, USA) pictures were used for evaluating wear performance of both, ceramics and antagonists. RESULTS: No wear was found for zirconia substructures. Veneering porcelain provided wear traces between 186.1±33.2 µm and 232.9±66.9 µm (steatite antagonist) and 90.6±3.5 µm and 123.9±50.7 µm (enamel). Wear of the steatite antagonists varied between 0.812±0.256 mm(2) and 1.360±0.321 mm(2) for zirconia and 1.708±0.275 mm(2) and 2.568±0.827 mm(2) for porcelain. Enamel generally showed wear, cracks or even fractures at the ridge, regardless whether opposed by zirconia or porcelain/glaze. Enamel was polished, when opposed to zirconia, or plowed, provoked and grinded, when opposed to porcelain/glaze. CONCLUSION: The results of the wear test with steatite or enamel antagonists indicated no measurable wear on zirconia surfaces. Porcelain showed higher wear than zirconia, but comparable or lower wear than an enamel reference. Antagonistic wear against zirconia was found to be lower than wear against porcelain.


Assuntos
Porcelana Dentária/química , Facetas Dentárias , Zircônio/química , Silicatos de Alumínio/química , Força de Mordida , Cerâmica/química , Esmalte Dentário/ultraestrutura , Corrosão Dentária/métodos , Polimento Dentário/métodos , Desgaste de Restauração Dentária , Humanos , Óxido de Magnésio/química , Teste de Materiais , Microscopia Eletrônica de Varredura , Compostos de Potássio/química , Dióxido de Silício/química , Estresse Mecânico , Propriedades de Superfície , Temperatura , Fatores de Tempo , Água/química , Ítrio/química
14.
J Mech Behav Biomed Mater ; 4(1): 2-8, 2011 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-21094475

RESUMO

OBJECTIVES: This study investigated the shear bond strength (SBS) and the tensile bond strength (TBS) of the zirconia-to-resin interface using different cement bonding concepts. METHODS: Coplanar zirconia specimens were bonded to CoCr-cylinders measuring 5 mm in diameter and 3 mm in height. All bonding areas were first sandblasted with 110 µm Al(2)O(3) (0.28 MPa, 10 s). SBS and TBS were determined after 24 h and 90 d of water storage as well as after 12,000 thermal cycles (TC, 5°/55 °C, 17 d). The bonding concepts consisted of the application of a silane coupling agent, tribological silica coating (Rocatec system), cements or primers containing phosphone, mono-phosphate, or di-phosphate, and a combination of silica coating and primer. RESULTS: Bond strength higher than 10 MPa was considered clinically sufficient. SBS measured with each bonding concept surpassed this value, except control and MaxCem after 90 d. In contrast, TBS values were rather different. The application of a silane coupling agent alone showed very low values in the TBS test. Silica coating was only sufficient after 90 d of water storage and when combined with phosphate-esters or phosphone-containing primers. Bonding agents based on di-phosphates or phosphones showed stable TBS values of less than 10 MPa under different aging conditions. The predominant mode of failure was adhesive failure at the ceramic surface. CONCLUSIONS: None of the investigated bonding concepts of the zirconia-to-resin interface provided clinically sufficient tensile bond strength. SBS values were inadequate for a sufficient ranking.


Assuntos
Colagem Dentária/métodos , Cimentos de Resina/química , Zircônio/química , Coroas , Análise do Estresse Dentário , Humanos , Técnicas In Vitro , Teste de Materiais , Resistência ao Cisalhamento , Resistência à Tração
15.
Clin Oral Investig ; 15(6): 1007-12, 2011 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-20922439

RESUMO

Chipping of the applied veneering ceramic is reported to be a main clinical failure type of computer-aided design/computer-aided manufacturing- or manually copy-milled zirconia restorations. The aim of this in vitro study was to investigate whether different substructure designs and veneering processes done by different dental technicians do significantly influence chipping in zirconia-based all-ceramic fixed dental prostheses during simulated oral service. Five groups (n = 8 per group) of three-unit zirconia substructures were fabricated in three different laboratories using copy-milling technique. Three series were veneered with identical porcelain (groups 1-3) and one with a second different porcelain (group 4). The fifth group was milled to final contour design without veneering. Dimensions of the connector areas were determined. All fixed partial dentures (FPDs) were adhesively boned on human teeth and thermally cycled and mechanically loaded (1.2 × 10(6) × 50 N; 6,000 × 5°C/55°C) using human antagonists. Restorations were monitored during thermal cycling and mechanical loading (TCML). FPDs which survived were loaded to fracture. FPDs which failed during TCML were investigated with fractographic means. During TCML, chipping took place in groups 1 (two times), 2 (four times) and 3 (five times) (Table 1). Chipping areas varied between 2.3 mm(2) (group 3) and 58.7 mm(2) (group 2). Groups 4 and 5 provided no failures during TCML. Failure in all cases started from contact points, where superficial wear and disruption of the porcelain were found. No significant correlation could be determined between connector thickness and number of failures. Median fracture results varied between 1,011 N (group 3) and 2,126 N (group 2). The results show the necessity of considering individual design and manufacturing of restorations as well as contact situation. Advanced technical training on zirconia-based restorations is recommended.


Assuntos
Materiais Dentários/química , Planejamento de Dentadura/métodos , Prótese Parcial Fixa , Zircônio/química , Fenômenos Biomecânicos , Força de Mordida , Cimentação/métodos , Desenho Assistido por Computador , Coroas , Dente Suporte , Porcelana Dentária/química , Falha de Restauração Dentária , Desgaste de Restauração Dentária , Análise do Estresse Dentário/instrumentação , Técnicos em Prótese Dentária/normas , Facetas Dentárias , Adesivos Dentinários/química , Humanos , Laboratórios Odontológicos/normas , Microscopia Eletrônica de Varredura , Cimentos de Resina/química , Estresse Mecânico , Propriedades de Superfície , Temperatura
16.
Quintessence Int ; 40(9): e62-8, 2009 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-19862391

RESUMO

OBJECTIVE: To test casting capacities of impression materials under dry and wet sulcular conditions in vitro. METHOD AND MATERIALS: An incisor with a circular shoulder preparation (1 mm) was inserted in a primary mold. A shiftable secondary mold allowed adaptation of sulcular depth (1 to 4 mm). An outer circular chamfer assured reproducible positioning of an impression material carrier. Tested materials were PVS of differing viscosities (extra low, Panasil Contact Plus [ELV]; low, Affinis Light Body [LV]; and medium, Virtual Monophase [MV]) and one polyether material of low viscosity (Permadyne Garant [PE]). Impressions were made with sulcular depths of 1 to 4 mm in wet and 1 and 4 mm in dry conditions, cut in half, and digitized with a light microscope (Stemi SV8). Surface area of the region of interest (ROI, at inner angle of preparation) was determined with Optimas 6.2. Medians were calculated, and statistical analysis was performed using the Mann-Whitney U test (P # .05). RESULTS: Median values of the measurements under wet condition demonstrated the smallest ROI areas for the ELV (297-330[pixel]) and the MV (253-421[pixel]) materials followed by the LV (582-745[pixel]) and the PELV (544-823[pixel]). All materials showed significantly higher values for the wet compared to dry sulcular conditions. Repeated measurements showed no significant differences to the corresponding first determined series. CONCLUSION: The sulcus model is applicable to assess casting abilities of impression materials in clinically approximated sulcular conditions. The PVS materials with extra low and medium viscosities showed the best properties in dry and wet conditions.


Assuntos
Técnica de Fundição Odontológica , Materiais para Moldagem Odontológica/química , Técnica de Moldagem Odontológica , Modelos Dentários , Preparo da Cavidade Dentária , Dessecação , Humanos , Processamento de Imagem Assistida por Computador , Teste de Materiais , Microscopia , Polivinil/química , Reologia , Siloxanas/química , Propriedades de Superfície , Viscosidade , Água/química
17.
J Dent ; 37(12): 978-83, 2009 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-19695301

RESUMO

OBJECTIVES: The aim of this study was to evaluate the in vitro behaviour of all-ceramic zirconia molar crowns in regard to different core designs and marginal fit. METHODS: Identically shaped methacrylate molars were prepared according to the ceramic restoration directives resulting in a 1-mm deep circular shoulder preparation. They were embedded in polymethylmethacrylate resin after covering their roots with a polyether layer to simulate periodontal mobility. The crown cores were made of yttria-stabilized zirconia veneered with a corresponding veneering ceramic. The crowns were divided into 5 groups (n=8) which differed in core design and cement gap thickness: #1: simple core, 40 microm cement; #2: core with minimal occlusal support, 40 microm cement; #3: core with optimized cusp support, 40 microm cement; #4: core with optimized cusp support, 30 microm cement; #5: core with optimized cusp support, 10 microm cement. All crowns were cemented with zinc oxide phosphate cement and thermo mechanically loaded (1.2 x 10(6) x 50N; 6000x5 degrees C/55 degrees C) with identical metal ceramic restorations as antagonists. Crown failures were monitored and described. Area and direction of the chipping failures of the veneering ceramic were documented by means of scanning electron micrographs. RESULTS: All core designs showed chipping during chewing simulation with different numbers (defect areas). #1: 6 chippings (8.1mm(2)); #2: 2 chippings (3.5mm(2)); #3: 2 chippings (2.1mm(2)); #4: 3 chippings (5.7 mm(2)); #5: 3 chippings (7.3mm(2)). CONCLUSIONS: An optimized core design reduced number and surface area of occurring chippings. A variation of the gap thickness showed no significant influence on the in vitro performance.


Assuntos
Coroas , Adaptação Marginal Dentária , Materiais Dentários/química , Planejamento de Prótese Dentária , Dente Molar , Zircônio/química , Força de Mordida , Porcelana Dentária/química , Falha de Restauração Dentária , Facetas Dentárias , Humanos , Teste de Materiais , Ligas Metalo-Cerâmicas/química , Microscopia Eletrônica de Varredura , Técnica para Retentor Intrarradicular/instrumentação , Estresse Mecânico , Propriedades de Superfície , Temperatura , Preparo Prostodôntico do Dente/métodos , Ítrio/química , Cimento de Fosfato de Zinco/química
18.
Clin Oral Investig ; 13(4): 453-7, 2009 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-19221810

RESUMO

Resin-bonded fixed partial dentures (RBFPD) are used as a minimal invasive, tooth-preventing alternative for replacing anterior teeth. Zirconia cantilever restorations were supposed to show sufficient strength for a clinical application. The aim of this investigation was to determine the fracture characteristics of cantilever and two-retainer RBFPD, which are fabricated by computer-manufactured high-strength zirconia. Human incisors and canines were used to form three groups of 14 RBFPDs with different types of preparation: group 1, an invasive cantilever; group 2, a minimal-invasive cantilever and group 3, a two-retainer RBFPD control. After thermal cycling and mechanical loading, which was performed to simulate oral service, all restorations were loaded to fracture in a universal testing machine. One half of the specimens were investigated as a control without simulated service. Mode of failure was determined for the three designs. Both cantilever groups showed comparable fracture resistance of 227 N (no. 1) and 210 N (no. 2) before thermal cycling and mechanical loading. The resistance after aging was reduced to 210 N for the invasive cantilever RBFPD and to 179 N for the minimal invasive group. Three-unit RBFPDs showed a significantly higher (p < 0.02) fracture resistance than cantilever bridges before (426 N) as well as after aging (360 N). Predominant failure was FPD and retainer fracture for the invasive cantilever design, debonding for the minimal cantilever design and RBFPD fracture for the two-retainer design. The present study revealed a significantly higher fracture resistance for two-retainer RBFPDs than for cantilever RBFPDs. The frequency of adhesive debonding increased for non-retentive prepared cantilever RBFPDs.


Assuntos
Materiais Dentários/química , Prótese Adesiva , Zircônio/química , Cerâmica/química , Desenho Assistido por Computador , Dente Canino , Colagem Dentária , Corrosão Dentária , Falha de Restauração Dentária , Análise do Estresse Dentário , Facetas Dentárias , Planejamento de Dentadura , Retenção de Dentadura , Humanos , Incisivo , Teste de Materiais , Cimentos de Resina/química , Silanos/química , Estresse Mecânico , Temperatura , Fatores de Tempo , Preparo Prostodôntico do Dente/métodos
19.
Int J Prosthodont ; 22(5): 479-87, 2009.
Artigo em Inglês | MEDLINE | ID: mdl-20095198

RESUMO

PURPOSE: The aim of this study was to investigate the survival rates and technical failures of removable prostheses (RPs) supported by telescopic double crown (TDC)-retained abutment teeth luted with zinc-phosphate or glass-ionomer cement. MATERIALS AND METHODS: Clinical records of 577 patients (288 women, 289 men) who received 577 TDC-retained RPs supported by 1,807 abutments at the Department of Prosthodontics of the University Hospital Regensburg, Regensburg, Germany, between 1984 and 2007 were analyzed. The 577 prostheses included 200 attached to telescopic crowns with friction fit (FFs), 62 to conical crowns (CCs), and 315 to parallel-sided telescopic crowns with clearance fit (CFs). Survival probabilities were evaluated for the RPs, loss of cementation of the inner copings, secondary caries, and abutment teeth that required endodontic treatment using the Kaplan-Meier method. A Cox regression analysis determined the impact of covariates such as sex, denture location (maxilla/mandible), Eichner classification, number of abutment teeth, and the type of double crown system used. RESULTS: The 10-year survival probability was 98.8% +/- 0.09% for FFs, 92.9% +/- 0.41% for CCs, and 86.6% +/- 0.05% for CFs. During the observation period, loss of cementation was frequently observed (FFs: 32%, CCs: 53.2%, CFs: 21.3%). After 15 years, more than 75% of patients had experienced at least one "loss of cementation" event. In this respect, zinc-oxide phosphate and glass-ionomer cements did not show any significant difference. CONCLUSION: The long-term successful outcome of the RP experience was not compromised, although numerous clinical visits were required for maintenance. The predominant maintenance procedure was the need for recementation of the inner copings.


Assuntos
Coroas , Cimentos Dentários/química , Retenção de Dentadura , Prótese Total , Revestimento de Dentadura , Prótese Parcial Removível , Cimentação/métodos , Dente Suporte , Cárie Dentária/etiologia , Adaptação Marginal Dentária , Planejamento de Prótese Dentária , Reparação em Prótese Dentária , Reembasamento de Dentadura , Reparação em Dentadura , Feminino , Seguimentos , Cimentos de Ionômeros de Vidro/química , Humanos , Masculino , Probabilidade , Cimentos de Resina/química , Estudos Retrospectivos , Tratamento do Canal Radicular , Fatores Sexuais , Análise de Sobrevida , Resultado do Tratamento , Cimento de Óxido de Zinco e Eugenol/química , Cimento de Fosfato de Zinco/química
20.
Dent Mater ; 25(5): 601-4, 2009 May.
Artigo em Inglês | MEDLINE | ID: mdl-19100611

RESUMO

OBJECTIVES: The literature demonstrates that conventional luting of metal-based restorations using zinc phosphate cements is clinically successful over 20 years. This study compared the clinical outcomes of metal-based fixed partial dentures luted conventionally with zinc phosphate and self-adhesive resin cement. METHODS: Forty-nine patients (mean age 54+/-13 years) received 49 metal-based fixed partial dentures randomly luted using zinc phosphate (Richter & Hoffmann, Berlin, Germany) or self-adhesive resin cement (RelyX Unicem Aplicap, 3M ESPE, Germany) at the University Medical Center Regensburg. The core build-up material was highly viscous glass ionomer; the finishing line was in dentin. The study included 42 posterior, 5 anterior crowns and two onlays. Forty-seven restorations were made of precious alloys, 2 of non-precious alloys. The restorations were clinically examined every year. The clinical performance was checked for plaque (0-5; PI, Quigley-Hein), bleeding (0-4; PBI; Mühlemann) and attachment scores. The examination included pulp vitality and percussion tests. STATISTICS: Means of scores, standard deviation, cumulative survival and complication rates were calculated using life tables. RESULTS: The mean observation time was 3.16+/-0.6 years (min: 2.0; max: 4.5 years). During that time no restoration was lost, no recementation became necessary. One endodontic treatment was performed in the self-adhesive composite group after 2.9 years. At study end bleeding (1.44 RelyX Unicem vs. 1.25 zinc phosphate) and plaque (1.64 RelyX Unicem vs. 1.0 zinc phosphate) scores showed no statistically significant difference. SIGNIFICANCE: The self-adhesive resin cement performed clinically as well and can be used as easily as zinc phosphate cement to retain metal-based restorations over a 38-month observation period.


Assuntos
Colagem Dentária/métodos , Cimentos de Resina , Cimento de Fosfato de Zinco , Ligas Dentárias , Prótese Parcial Fixa , Humanos , Estimativa de Kaplan-Meier , Pessoa de Meia-Idade , Estudos Prospectivos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA