Pencil graphite electrodes for in-situ spectroelectrochemical sensing of reaction intermediates and products in organic solvents.

BACKGROUND: Spectroelectrochemistry (SEC) is a valuable analytical tool providing insights to reaction mechanisms and the structure of species involved in charge transfer reactions. Most of commercial SEC setups are based on platinum working electrodes where the adsorption of species involved in reactions often complicates their analysis. RESULTS: In this work, we employ an array of pencil graphite rods as an optically transparent working electrode in a custom-made air-tight thin-layer cell suitable for the SEC analysis performed here in acetonitrile as a representative non-aqueous solvent. The functionality of the device was demonstrated by UV-Vis SEC sensing of charge transfer reactions of ruthenium acetylacetonate, ferrocene and ethylviologen dibromide redox probes performed employing the cyclic voltammetry. The SEC response obtained for all three probes confirmed no adsorption and the absence of oxygen in the cell. Furthermore, we have developed and utilized finite element method numerical simulations considering charge transfer reactions coupled with the diffusional mass transport to model the cyclic voltammetric response and the reaction conversion in the thin-layer SEC cell. SIGNIFICANCE: Our work paves the way for easy-to-assemble customized air-tight adsorption-free SEC devices with the manufacturing costs well below those of commercially available platforms. Developed computational approaches have the predictive power for optimizing reaction conditions and the geometry of the SEC cell.

Eliminating Flooding-related Issues in Electrochemical CO2-to-CO Converters: Two Lines of Defense.

By using silver (Ag) in nanostructured (nanowire, nanosphere, etc.) or thin-layer form as a catalyst for electrochemical CO2 reduction, very high CO-forming selectivity of almost 100% can be achieved. Supported by gas diffusion layers (GDLs),  the reactant CO2 in the gas phase can approach and potentially access active Ag sites, which allows current densities in the range of a few hundred mA cm-2 to be reached. Yet, the stability of gas diffusion electrode (GDE) based electrochemical CO2-to-CO converters is far from perfect, and the activity of GDE cathodes, especially when operated at high current densities, often significantly decays during electrolyses after no more than a few hours. The primary reason of stability losses in GDE-based CO2-to-CO electrolysers is flooding: that is, the excess wetting of the GDE that prevents CO2 from reaching Ag catalytic sites. In the past years, the authors of this paper at Empa and at the University of Bern, cooperating with other partners of the National Competence Center for Research (NCCR) on Catalysis, took different approaches to overcome flooding. While opinions differ with regard to where the first line of defense in protecting GDEs from flooding should lie, a comparison of the recent results of the two groups gives unique insight into the nature of processes occurring in GDE cathodes used for CO2 electrolysis.

Probing charge transfer through antifouling polymer brushes by electrochemical methods: The impact of supporting self-assembled monolayer chain length.

Ultrathin surface-tethered polymer brushes represent attractive platforms for a wide range of sensing applications in strategically vital areas such as medicine, forensics, or security. The recent trends in such developments towards "real world conditions" highlighted the role of zwitterionic poly(carboxybetaine) (pCB) brushes which provide excellent antifouling properties combined with bio-functionalization capacity. Highly dense pCB brushes are usually prepared by the "grafting from" polymerization triggered by initiators on self-assembled monolayers (SAMs). Here, multi-methodological experimental studies are pursued to elucidate the impact of the alkanethiolate SAM chain length (C6, C8 and C11) on structural and functional properties of antifouling poly(carboxybetaine methacrylamide) (pCBMAA) brush. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in a custom-made 3D printed cell employing [Ru(NH3)6]3+/2+ redox probe were used to investigate penetrability of SAM/pCBMAA bilayers for small molecules and interfacial charge transfer characteristics. The biofouling resistance of pCBMAA brushes was characterized by surface plasmon resonance; ellipsometry and FT-IRRAS spectroscopy were used to determine swelling and relative density of the brushes synthesized from initiator-bearing SAMs with varied carbon chain length. The SAM length was found to have a substantial impact on all studied characteristics; the highest value of charge transfer resistance (Rct) was observed for denser pCBMAA on longer-chain (C11) SAM when compared to shorter (C8/C6) SAMs. The observed high value of Rct for C11 implies a limitation for the analytical performance of electrochemical sensing methods. At the same time, the pCBMAA brushes on C11 SAM exhibited the best bio-fouling resistance among inspected systems. This demonstrates that proper selection of supporting structures for brushes is critical in the design of these assemblies for biosensing applications.

Spectroelectrochemical sensing of reaction intermediates and products in an affordable fully 3D printed device.

Recent advances in fused deposition modelling 3D printing (FDM 3DP) and synthesis of printable electrically conductive materials enabled the manufacture of customized electrodes and electrochemical devices by this technique. The past couple of years have seen a boom in applying approaches of FDM 3DP in the realm of spectroelectrochemistry (SEC). Despite significant progress, reported designs of SEC devices still rely on conventionally manufactured optical components such as quartz windows and cuvettes. To bridge this technological gap, in this work we apply bi-material FDM 3DP combining electrically conductive and optically translucent filaments to manufacture working electrodes and cells, constituting a fully integrated microfluidic platform for transmission absorption UV-Vis SEC measurements. The cell design enables de-aeration of samples and their convenient handling and analysis. Employing cyclic voltammetric measurements with ruthenium(III) acetylacetonate, ethylviologen dibromide and ferrocenemethanol redox-active probes as model analytes, we demonstrate that the presented platform allows SEC sensing of reactants, intermediates and products of charge transfer reactions, including the inspection of their long-term stability. Approaches developed and presented in this work pave the way for manufacturing customized SEC devices with dramatically reduced costs compared to currently available commercial platforms.

Effective perspiration is essential to uphold the stability of zero-gap MEA-based cathodes used in CO2 electrolysers.

The application of gas diffusion electrodes (GDEs) for the electrochemical reduction of CO2 to value-added products creates the possibility of achieving current densities of a few hundred mA cm-2. To achieve stable operation at such high reaction rates remains, however, a challenging task, due to the flooding of the GDE. In order to mitigate flooding in a zero-gap membrane-electrode assembly (MEA) configuration, paths for effective electrolyte perspiration inside the GDE structure have to be kept open during the electrolysis process. Here we demonstrate that apart from the operational parameters of the electrolysis and the structural properties of the supporting gas diffusion layers, also the chemical composition of the applied catalyst inks can play a decisive role in the electrolyte management of GDEs used for CO2 electroreduction. In particular, the presence of excess amounts of polymeric capping agents (used to stabilize the catalyst nanoparticles) can lead to a blockage of micropores, which hinders perspiration and initiates the flooding of the microporous layer. Here we use a novel ICP-MS analysis-based approach to quantitatively monitor the amount of perspired electrolyte that exits a GDE-based CO2 electrolyser, and we show a direct correlation between the break-down of effective perspiration and the appearance of flooding-the latter ultimately leading to a loss of electrolyser stability. We recommend the use of an ultracentrifugation-based approach by which catalyst inks containing no excess amount of polymeric capping agents can be formulated. Using these inks, the stability of electrolyses can be ensured for much longer times.

Direct electrochemical determination of environmentally harmful pharmaceutical ciprofloxacin in 3D printed flow-through cell.

Rising amounts of antibiotic residues in wastewater cause serious problems including increased bacterial resistance. Wastewater treatment plants (WWTPs) do not, in the case of new, modern pharmaceuticals, ensure their complete removal. Ciprofloxacin (CIP) is one of many micropollutants that partially pass through WWTPs, implying that its monitoring is essential for the assessment of the water quality. In real sewage systems, the determination of CIP needs to be performed under flowing conditions, which calls for the deployment of inexpensive, robust, and easily integrable approaches such as electrochemical techniques. However, to the best of our knowledge, there is no report on the electrochemical determination of CIP in a flowing matrix. To bridge this gap, we perform here cyclic and square-wave voltammetric sensing study of CIP employing boron-doped diamond screen printed electrodes in a custom-made 3D printed flow-through cell to mimic conditions in real sewage systems. An irreversible two-step oxidation of CIP is demonstrated, with the first step providing clear Faradaic response as analytically relevant signal. This response was found to scale with the sample flow rate according to the prediction given by Levich equation. Our work provides an in-depth inspection of the electrochemical response of CIP under controlled-convection conditions, which is an essential prerequisite for monitoring this antibiotic in real flowing sewage systems.

3D Printed Platform for Impedimetric Sensing of Liquids and Microfluidic Channels.

Fused deposition modeling 3D printing (FDM-3DP) employing electrically conductive filaments has recently been recognized as an exceptionally attractive tool for the manufacture of sensing devices. However, capabilities of 3DP electrodes to measure electric properties of materials have not yet been explored. To bridge this gap, we employ bimaterial FDM-3DP combining electrically conductive and insulating filaments to build an integrated platform for sensing conductivity and permittivity of liquids by impedance measurements. The functionality of the device is demonstrated by measuring conductivity of aqueous potassium chloride solution and bottled water samples and permittivity of water, ethanol, and their mixtures. We further implement an original idea of applying impedance measurements to investigate dimensions of 3DP channels as base structures of microfluidic devices, complemented by their optical microscopic analysis. We demonstrate that FDM-3DP allows the manufacture of microchannels of width down to 80 µm.

Cracks as Efficient Tools to Mitigate Flooding in Gas Diffusion Electrodes Used for the Electrochemical Reduction of Carbon Dioxide.

The advantage of employing gas diffusion electrodes (GDEs) in carbon dioxide reduction electrolyzers is that they allow CO2 to reach the catalyst in gaseous state, enabling current densities that are orders of magnitude larger than what is achievable in standard H-type cells. The gain in the reaction rate comes, however, at the cost of stability issues related to flooding that occurs when excess electrolyte permeates the micropores of the GDE, effectively blocking the access of CO2 to the catalyst. For electrolyzers operated with alkaline electrolytes, flooding leaves clear traces within the GDE in the form of precipitated potassium (hydrogen)carbonates. By analyzing the amount and distribution of precipitates, and by quantifying potassium salts transported through the GDE during operation (electrolyte perspiration), important information can be gained with regard to the extent and means of flooding. In this work, a novel combination of energy dispersive X-ray and inductively coupled plasma mass spectrometry based methods is employed to study flooding-related phenomena in GDEs differing in the abundance of cracks in the microporous layer. It is concluded that cracks play an important role in the electrolyte management of CO2 electrolyzers, and that electrolyte perspiration through cracks is paramount in avoiding flooding-related performance drops.

Applicability of Selected 3D Printing Materials in Electrochemistry.

This manuscript investigates the chemical and structural stability of 3D printing materials (3DPMs) frequently used in electrochemistry. Four 3D printing materials were studied: Clear photopolymer, Elastic photopolymer, PET filament, and PLA filament. Their stability, solubility, structural changes, flexibility, hardness, and color changes were investigated after exposure to selected organic solvents and supporting electrolytes. Furthermore, the available potential windows and behavior of redox probes in selected supporting electrolytes were investigated before and after the exposure of the 3D-printed objects to the electrolytes at various working electrodes. Possible electrochemically active interferences with an origin from the 3DPMs were also monitored to provide a comprehensive outline for the use of 3DPMs in electrochemical platform manufacturing.

Probing polymer brushes with electrochemical impedance spectroscopy: a mini review.

Polymer brushes are frequently used as surface-tethered antifouling layers in biosensors to improve sensor surface-analyte recognition in the presence of abundant non-target molecules in complex biological samples by suppressing nonspecific interactions. However, because brushes are complex systems highly responsive to changes in their surrounding environment, studying their properties remains a challenge. Electrochemical impedance spectroscopy (EIS) is an emerging method in this context. In this mini review, we aim to elucidate the potential of EIS for investigating the physicochemical properties and structural aspects of polymer brushes. The application of EIS in brush-based biosensors is also discussed. Most common principles employed in these biosensors are presented, as well as interpretation of EIS data obtained in such setups. Overall, we demonstrate that the EIS-polymer brush pairing has a considerable potential for providing new insights into brush functionalities and designing highly sensitive and specific biosensors.

Functionalized Silver Nanoparticles as Colorimetric and Fluorimetric Sensor for Environmentally Toxic Mercury Ions: An Overview.

Nanoscience is a multifaceted field which encompasses metal nanoparticles (MNPs) having novel and size-related optical properties significantly different from the bulk level as well as at the atomic level. Amongst noble MNPs, the silver nanoparticles (AgNPs) have unique properties for metal interaction. Presently, there have been expedite reports which are taken under the review in virtue of sensing the mercury ions in aqueous media. Mercury dissemination in various forms contaminates the ecosystem. Globally mercury is ranked as the most toxic element and an urgent threat to humans since it causes major health issues. Employing MNPs, especially AgNPs for the detection of mercury ions is the economic, handy and apt method in contrast to time-consuming methods that use expensive instrumentations. The review highlights a study of colorimetric and fluorimetric detection of the level of Hg (II) ions in aqueous media selectively with high sensitivity in different courses of conditions using AgNPs synthesized by various approaches. Graphical abstract.

Environmental Control of Single-Molecule Junction Evolution and Conductance: A Case Study of Expanded Pyridinium Wiring.

Environmental control of single-molecule junction evolution and conductance was demonstrated for expanded pyridinium molecules by scanning tunneling microscopy break junction method and interpreted by quantum transport calculations including solvent molecules explicitly. Fully extended and highly conducting molecular junctions prevail in water environment as opposed to short and less conducting junctions formed in non-solvating mesitylene. A theoretical approach correctly models single-molecule conductance values considering the experimental junction length. Most pronounced difference in the molecular junction formation and conductance was identified for a molecule with the highest stabilization energy on the gold substrate confirming the importance of molecule-electrode interactions. Presented concept of tuning conductance through molecule-electrode interactions in the solvent-driven junctions can be used in the development of new molecular electronic devices.

Electrochemical study of ephedrine at the polarized liquid-liquid interface supported with a 3D printed cell.

In this work, we have examined an electrochemical behavior of the ephedrine at the polarized liquid-liquid interface (water/1,2-dichloroethane). In this respect, we first designed and then 3D printed polyamide-based electrochemical cell that was used as the liquid-liquid interface support during electroanalytical measurements. The protonated ephedrine undergoes a reversible ion transfer reaction with the standard Galvani potential difference equal to +0.269 V. This value was used to calculate the water - 1,2-dichloroethane logP equal to -4.6. Ion transfer voltammetry was used to build the calibration curve and allowed for the ephedrine detection from concentration equal to 20 µM. By varying the pH of the aqueous phase from 2 up to 12 we were able to plot the ion partition diagram that was further analyzed and provided several pharmacochemical information. To further push this work towards practical utility, we have formulated the artificial urine and studied the interfacial behavior of all its components at the polarized liquid-liquid interface. Ephedrine detection from real spiked urine samples was also performed.

The development of a fully integrated 3D printed electrochemical platform and its application to investigate the chemical reaction between carbon dioxide and hydrazine.

The combination of computer assisted design and 3D printing has recently enabled fast and inexpensive manufacture of customized 'reactionware' for broad range of electrochemical applications. In this work bi-material fused deposition modeling 3D printing is utilized to construct an integrated platform based on a polyamide electrochemical cell and electrodes manufactured from a polylactic acid-carbon nanotube conductive composite. The cell contains separated compartments for the reference and counter electrode and enables reactants to be introduced and inspected under oxygen-free conditions. The developed platform was employed in a study investigating the electrochemical oxidation of aqueous hydrazine coupled to its bulk reaction with carbon dioxide. The analysis of cyclic voltammograms obtained in reaction mixtures with systematically varied composition confirmed that the reaction between hydrazine and carbon dioxide follows 1/1 stoichiometry and the corresponding equilibrium constant amounts to (2.8 ± 0.6) × 103. Experimental characteristics were verified by results of numerical simulations based on the finite-element-method.

Selected ion flow tube mass spectrometry analyses of isobaric compounds methanol and hydrazine in humid air.

RATIONALE: The volatile compounds generated by the electrochemical reduction of atmospheric carbon dioxide and nitrogen include isobaric methanol (CH3 OH) and, potentially, hydrazine (N2 H4 ). To achieve quantification of hydrazine molecules by selected ion flow tube mass spectrometry (SIFT-MS), its reactions with H3 O+ , NO+ and O2 + reagent ions must be understood. METHODS: A SIFT study (using a SIFT-MS instrument) was carried out to obtain rate coefficients and product ions for the reactions of H3 O+ , NO+ and O2 + reagent ions with N2 H4 and CH3 OH molecules present in the humid headspace of their aqueous solutions. Using the kinetics data obtained, solution headspace concentrations were determined for both compounds as a function of their liquid-phase concentrations at 10, 20 and 35°C. RESULTS: Both compounds react with H3 O+ ions via rapid proton transfer to produce CH3 OH2 + and H5 N2 + ions with the common m/z value of 33. It is revealed that NO+ rapidly transfers charge to N2 H4 (rate coefficient k = 2.3 × 10-9 cm3 s-1 ) but only slowly associates with CH3 OH (k2eff = 7.1 × 10-11 cm3 s-1 ). Thus, selective analysis can be achieved using both H3 O+ and NO+ reagent ions. The headspace methanol vapour concentration was found to increase with increasing solution temperature, but that of hydrazine decreased with an associated increase of ammonia (NH3 ) as measured with O2 + reagent ions. CONCLUSIONS: The isobaric compounds methanol and hydrazine can be separately analysed in real time by SIFT-MS using H3 O+ and NO+ reagent ions, even when they co-occur in humid air. The evolution of hydrazine from aqueous solutions can be quantitatively monitored together with its decomposition at elevated temperatures.

Tuning the contact conductance of anchoring groups in single molecule junctions by molecular design.

A tetraphenylmethane tripod functionalized with three thiol moieties in the para position can serve as a supporting platform for functional molecular electronic elements. A combined experimental scanning tunneling microscopy break junction technique with theoretical approaches based on density functional theory and non-equilibrium Green's function formalism was used for detailed charge transport analysis to find configurations, geometries and charge transport pathways in the molecular junctions of single molecule oligo-1,4-phenylene conductors containing this tripodal anchoring group. The effect of molecular length (n = 1 to 4 repeating phenylene units) on the charge transport properties and junction configurations is addressed. The number of covalent attachments between the electrode and the tripodal platform changes with n affecting the contact conductance of the junction. The longest homologue n = 4 adopts an upright configuration with all three para thiolate moieties of the tripod attached to the gold electrode. The contact conductance of the tetraphenylmethane tripod substituted by thiols in the para position is higher than that substituted in the meta position. Such molecular arrangement is highly conducting and allows well-defined directional positioning of a variety of functional groups.

Probabilistic mapping of single molecule junction configurations as a tool to achieve the desired geometry of asymmetric tripodal molecules.

Four molecules containing identical tripodal anchors and p-oligophenylene molecular wires of increasing length were used to demonstrate tuning of the asymmetric molecular junction to the desired geometry by probabilistic mapping of single molecule junction configurations in a scanning tunnelling microscopy break junction experiment.

Importance of the Anchor Group Position (Para versus Meta) in Tetraphenylmethane Tripods: Synthesis and Self-Assembly Features.

The efficient synthesis of tripodal platforms based on tetraphenylmethane with three acetyl-protected thiol groups in either meta or para positions relative to the central sp(3) carbon for deposition on Au (111) surfaces is reported. These platforms are intended to provide a vertical arrangement of the substituent in position 4 of the perpendicular phenyl ring and an electronic coupling to the gold substrate. The self-assembly features of both derivatives are analyzed on Au (111) surfaces by low-temperature ultra-high-vacuum STM, high-resolution X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and reductive voltammetric desorption studies. These experiments indicated that the meta derivative forms a well-ordered monolayer, with most of the anchoring groups bound to the surface, whereas the para derivative forms a multilayer film with physically adsorbed adlayers on the chemisorbed para monolayer. Single-molecule conductance values for both tripodal platforms are obtained through an STM break junction experiment.

Adsorption of Papain on solid substrates of different hydrophobicity.

Adsorption properties of protein Papain at the solid|liquid (0.1 M KCl) interfaces of different hydrophobicity [highly oriented pyrolytic graphite (HOPG), bare gold, CH3, OH, and COOH-terminated self-assembled monolayers on gold] were studied by a combined quartz crystal microbalance and atomic force microscopy techniques. It was found that Papain forms an incomplete monolayer at hydrophobic interfaces (HOPG and CH3-terminated substrate), whereas on more hydrophilic ones, a complete monolayer formation was always observed with either the onset of the formation of a second layer (bare gold substrate) or adsorption in a multilayer fashion, possibly a bilayer formation (OH-terminated substrate). The surface concentration and compact monolayer film thickness was much lower on the COOH-terminated substrate compared to other surfaces studied. This result was explained by partial dissociation of the interfacial COOH groups leading to additional electrostatic interactions between the positively charged protein domains and negatively charged carboxylate anions, as well as to local pH changes promoting protein denaturation.

Electrochemistry and spectroelectrochemistry of bioactive hydroxyquinolines: a mechanistic study.

The oxidation mechanism of selected hydroxyquinoline carboxylic acids such as 8-hydroxyquinoline-7-carboxylic acid (1), the two positional isomers 2-methyl-8-hydroxyquinoline-7-carboxylic acid (3) and 2-methyl-5-hydroxyquinoline-6-carboxylic acid (4), as well as other hydroxyquinolines were studied in aprotic environment using cyclic voltammetry, controlled potential electrolysis, in situ UV-vis and IR spectroelectrochemistry, and HPLC-MS/MS techniques. IR spectroelectrochemistry showed that oxidation unexpectedly proceeds together with protonation of the starting compound. We proved that the nitrogen atom in the heterocycle of hydroxyquinolines is protonated during the apparent 0.7 electron oxidation process. This was rationalized by the autodeprotonation reaction by another two starting molecules of hydroxyquinoline, so that the overall oxidation mechanism involves two electrons and three starting molecules. Both the electrochemical and spectroelectrochemical results showed that the oxidation mechanism is not influenced by the presence of the carboxylic group in the chemical structure of hydroxyquinolines, as results from oxidation of 2,7-dimethyl-5-hydroxyquinoline (6). In the presence of a strong proton acceptor such as pyridine, the oxidation ECEC process involves two electrons and two protons per one molecule of the hydroxyquinoline derivative. The electron transfer efficiency of hydroxyquinolines in biosystems may be related to protonation of biocompounds containing nitrogen bases. Molecular orbital calculations support the experimental findings.