Synthesis of Chroman-2,4-diones via Ring-Opening/Ring-Closing Reaction Involving Palladium-Catalyzed Intramolecular Aryloxycarbonylation.

Palladium-catalyzed aminocarbonylation of 3-iodochromone was studied in the presence of primary and secondary amines using atmospheric pressure of carbon monoxide as a carbonyl source. This procedure successfully provided a library of chromone-3-carboxamides and 3-substituted chroman-2,4-diones in 40 to 92% isolated yields. The reaction proceeded via highly chemoselective aminocarbonylation (up to 100%) in the presence of secondary amines by using monodentate or bidentate phosphine ligands. The tendency of 3-iodochromone substrate to undergo ANRORC rearrangement with N-nucleophiles was crucial to shift the reaction toward an unprecedented chemoselective carbonylative transformation, where a late-stage carbonyl insertion is favored concomitantly to the last ring-closure step. The proposed aza-Michael addition/ring-opening/intramolecular aryloxycarbonylation sequence showed compatibility, uniquely, to primary amines when XantPhos was used as a ligand. The solid-state structures of chromone-3-carboxamide (2a) and chroman-2,4-dione (3s) were undoubtedly established by single-crystal XRD analysis. A catalytic cycle was proposed to rationalize the formation of the two types of carbonylated compounds.

Palladium-Catalyzed Selective Amino- and Alkoxycarbonylation of Iodoarenes with Aliphatic Aminoalcohols as Heterobifunctional O,N-Nucleophiles.

Palladium-catalyzed amino- and alkoxycarbonylation reactions of aryl iodides were investigated in the presence of aliphatic heterobifunctional N,O-nucleophiles. Selective synthesis of amide alcohols and amide esters was realized, controlled by the base and substrate ratio. The effect of iodobenzene substituents was also studied with surprising results in terms of product selectivity. In addition to the model ethanolamine/iodobenzene system, various heteroaromatic substrates and numerous related nucleophiles were tested under optimized conditions, providing moderate to good yields of the target compounds. Reactions of serinol and 1,3-diamino-2-propanol as model trifunctional compounds showed particularly high chemoselectivity on amide ester products. Considering the coordinative properties of the applied nucleophiles, a rational catalytic cycle was proposed.

A New Application of Spin and Fluorescence Double-Sensor Molecules.

EPR imaging techniques are known to be successful tools for mapping living bodies, especially because of the high transparency of tissues in the microwave range. This technique assumes the presence of radicals whose in vivo transport is also controlled by serum albumins. Accordingly, in this study, the interactions between 3-hydroxymethyl-1-oxyl-4-(pyren-1-yl)-2,2,5,5-tetramethyl-2,5-dihydro-1H-pyrrole radical and the human serum albumin molecules were investigated. To clarify the adsorption processes of this radical onto the surface of human serum albumin (HSA), the interaction of the OMe derivative of the radical was also examined parallel with the studies on the radical-HSA interactions. Considering the solubility issues and also to modulate the transport, inclusion complexes of the radical with a cavitand derivative were also studied. The latter interactions were observed through fluorescence spectroscopy, fluorescence polarization, and by EPR spectroscopy. As a double-sensor molecule, we found that the fluorophore nitroxide is a good candidate as it gave further information about host-guest interactions (fluorescence, fluorescence polarization, and EPR). We also found that in the presence of a cavitand, a complex with greater stability was formed between the sensor molecule and the human serum albumin. Based on these observations, we can conclude that applying this double-sensor (spin, fluorescent) molecule is useful in cases when different interactions can affect the EPR measurements.

Alkyl Levulinates and 2-Methyltetrahydrofuran: Possible Biomass-Based Solvents in Palladium-Catalyzed Aminocarbonylation.

In this research, ethyl levulinate, methyl levulinate, and 2-methyltetrahydrofuran as bio-derived hemicellulose-based solvents were applied as green alternatives in palladium-catalyzed aminocarbonylation reactions. Iodobenzene and morpholine were used in optimization reactions under different conditions, such as temperatures, pressures, and ligands. It was shown that the XantPhos ligand had a great influence on conversion (98%) and chemoselectivity (100% carboxamide), compared with the monodentate PPh3. Following this study, the optimized conditions were used to extend the scope of substrates with nineteen candidates (various para-, ortho-, and meta-substituted iodobenzene derivatives and iodo-heteroarenes), as well as eight different amine nucleophiles.

Synthesis of Novel Cavitand Host Molecules via Palladium-Catalyzed Aryloxy- and Azidocarbonylation.

Novel, elongated, resorcine[4]arene-based cavitands were synthesized via various consecutive reaction steps, including homogeneous catalytic aryloxy- and azidocarbonylation processes. The effects of carbon monoxide pressure and temperature on the conversion were examined in aryloxycarbonylation. It was revealed that a reaction temperature of 100 °C is required to achieve complete conversion both with monodentate (PPh3) and bidentate (Xantphos) phosphines at different carbon monoxide pressures (1-40 bar). Using ten different phenols as O-nucleophiles, partial hydrolysis of the esters to the corresponding carboxylic acids took place-i.e., 58-90% chemoselectivities toward esters were obtained. Moreover, the influences of temperature, reaction time and the catalyst ratio on the selectivity and conversion were described in the case of azidocarbonylation reaction. The formation of the acyl azide with high chemoselevtivity can be achieved at room temperature only. The higher reaction temperatures (50 °C) and higher catalyst loadings favor the formation of the primary amide. The characterization of the target compounds (esters and acyl azides) was carried out by IR and 1H and 13C NMR. The discussion of the influences of various parameters is based on in situ NMR investigations.

Anodic Polymerization of Phenylphenols in Methyl Isobutyl Ketone and Mesityl Oxide: Incorporation of a Cavitand into the Layers Formed for Sensing Phenols in Organic Media.

The electropolymerization of three phenylphenol isomers was studied in methyl isobutyl ketone and mesityl oxide, and the remarkable differences highlighted the importance of the carbon-carbon double bond in mesityl oxide. In the case of each substrate, a brownish deposit formed during the electrooxidation. The obvious difference between the polymers formed from the two solvents was recognized via voltammetric signal enhancement of 4-methoxyphenol and 4-chlorophenol, and it was only observed in the case of mesityl oxide. The experiments highlighted that incorporation of a cavitand with biphenyl groups on the upper rim of the polymers of phenylphenols improved the results to a small extent. The cavitand was, itself, electroactive without any fouling effect. As 2-phenylphenol is by far the cheapest of the three isomers, a cavitand was incorporated into its polymer, which was exploited to solve analytical problems while mesityl oxide was used as solvent. Useful quantifications were achieved in organic solvents; however, it failed under aqueous conditions due to the high hydrophobicity of the deposit. Application of differential pulse voltammetry for 4-methoxyphenol and 4-chlorophenol gave detection limits of 9.28 and 50.8 µM in acetonitrile, respectively. This procedure resulted in the immobilization of cavitand derivatives onto the electrode's surface, and the layer formed offered selective sensing of phenols by electrochemical methods.

Stereoisomeric Tris-BINOL-Menthol Bulky Monophosphites: Synthesis, Characterisation and Application in Rhodium-Catalysed Hydroformylation.

Four stereoisomeric monoether derivatives, based on axially chiral (R)- or (S)-BINOL bearing a chiral (+)- or (-)-neomenthyloxy group were synthesised and fully characterised by NMR spectroscopy and X-ray crystallography. The respective tris-monophosphites were thereof prepared and fully characterised. The coordination ability of the new bulky phosphites with Rh(CO)2(acac), was attested by 31P NMR, which presented a doublet in the range of δ = 120 ppm, with a 1J(103Rh-31P) coupling constant of 290 Hz. The new tris-binaphthyl phosphite ligands were further characterised by DFT computational methods, which allowed us to calculate an electronic (CEP) parameter of 2083.2 cm-1 and an extremely large cone angle of 345°, decreasing to 265° upon coordination with a metal atom. Furthermore, the monophosphites were applied as ligands in rhodium-catalysed hydroformylation of styrene, leading to complete conversions in 4 h, 100% chemoselectivity for aldehydes and up to 98% iso-regioselectivity. The Rh(I)/phosphite catalytic system was also highly active and selective in the hydroformylation of disubstituted olefins, including (E)-prop-1-en-1-ylbenzene and prop-1-en-2-ylbenzene.

Detection of Residual 2-Phenylphenol on Lemon Rind by Electrochemically Deposited Poly(hydroxybenzaldehyde) and Poly(hydroxybenzoic acid) Polymeric Stackings as Electrode Modifiers.

This study explores the characteristics of electrodeposition of the three hydroxybenzaldehyde isomers and selected hydroxybenzoic acids (4-hydroxybenzoic acid, salicylic acid, 3,5-dihydroxybenzoic acid) from mesityl oxide solvent. Similar to recent advances of this solvent, used by electrochemical studies, the carbon-carbon double bond had significant influence on the formation of polymers from the outlined molecules. In case of most substrates the peak currents increased to a steady-state but electropolymerization of some substrates caused significant deactivation. Scanning electron microscopic and complementary voltammetric studies facilitated that the electrochemically formed polymers are present on the electrode surface in stackings. In viewpoint of analysis of 2-phenylphenol, the modifying deposit formed from 4-hydroxybenzaldehyde was the best with 5 µM detection limit obtained with differential pulse voltammetry. Furthermore, a new procedure was chosen for the involvement of a cavitand derivative into the organic layers with the purpose to improve the layer selectivity (subsequent electrochemical polymerization in an other solution). Further studies showed that in this way the sensitivities of as-modified electrodes were a little worse than without this step, thus indicating that application of this step is disadvantageous. Recovery studies of 2-phenylphenol were carried out on lemon rind without any treatment, and it was compared with the case when the outer yellow layer was removed by rasping. The inner tissues showed very high adsorption affinity towards 2-phenylphenol.

Voltammetric and Fluorimetric Studies of Dibenzoylmethane on Glassy Carbon Electrodes and Its Interaction with Tetrakis (3,5-Dicarboxyphenoxy) Cavitand Derivative.

Due to the medical importance of dibenzoylmethane, one of the aims of the study was to find an appropriate packing material and a biologically friendly co-solvent to help its introduction into living systems. Accordingly, redox properties of dibenzoylmethane were investigated on glassy carbon electrodes in acetonitrile and in 1-propanol with cyclic voltammetry, and showed a diffusion-controlled process. In the anodic window, an oxidation peak appeared at around 1.9 V in both solvents. Cycling repeatedly between 0 and 2 V, the reproducibility of this peak was acceptable, but when extending the window to higher potentials, the electrode deactivated, obviously due to electrode material. The addition of the investigated tetrakis(3,5-dicarboxyphenoxy) cavitand did not significantly change the voltammograms. Further electrochemical experiments showed that the coexistence of water in acetonitrile and 1-propanol drastically reduces the solubility of dibenzoylmethane. Moreover, very rapid electrode deactivation occurred and this fact made the use of electrochemical methods complicated. Considering that both the cavitand and dibenzoylmethane are soluble in dimethyl sulfoxide, the interaction of these species was investigated and formation of stable complexes was detected. This observation was verified with fluorescence quenching studies. The mixture of water and dimethyl sulphoxide also dramatically improved the solubility of the cavitand-dibenzoylmethane complex at high excess of water. The addition of cavitand improved the solubility of dibenzoylmethane, a property which supports the application of dibenzoylmethane in therapy.

Weak Interactions of the Isomers of Phototrexate and Two Cavitand Derivatives.

The interactions of two conformers of newly synthesized photoswitchable azobenzene analogue of methotrexate, called Phototrexate, with two cavitand derivatives, have been investigated in dimethyl sulfoxide medium. Photoluminescence methods have been applied to determine the complex stabilities and the related enthalpy and entropy changes associated to the complex formation around room temperature. Results show opposite temperature dependence of complex stabilities. The structure of the upper rims of the host molecules and the reordered solvent structure were identified as the background of the opposite tendencies of temperature dependence at molecular level. These results can support the therapeutic application of the photoswitchable phototrexate, because the formation of inclusion complexes is a promising method to regulate the pharmacokinetics of drug molecules.

Selective Synthesis of N-Acylnortropane Derivatives in Palladium-Catalysed Aminocarbonylation.

The aminocarbonylation of various alkenyl and (hetero)aryl iodides was carried out using tropane-based amines of biological importance, such as 8-azabicyclo[3.2.1]octan-3-one (nortropinone) and 3α-hydroxy-8-azabicyclo[3.2.1]octane (nortropine) as N-nucleophile. Using iodoalkenes, the two nucleophiles were selectively converted to the corresponding amide in the presence of Pd(OAc)2/2 PPh3 catalysts. In the presence of several iodo(hetero)arenes, the application of the bidentate Xantphos was necessary to produce the target compounds selectively. The new carboxamides of varied structure, formed in palladium-catalyzed aminocarbonylation reactions, were isolated and fully characterized. In this way, a novel synthetic method has been developed for the producing of N-acylnortropane derivatives of biological importance.

Highly Selective Synthesis of 6-Glyoxylamidoquinoline Derivatives via Palladium-Catalyzed Aminocarbonylation.

The aminocarbonylation of 6-iodoquinoline has been investigated in the presence of large series of amine nucleophiles, providing an efficient synthetic route for producing various quinoline-6-carboxamide and quinoline-6-glyoxylamide derivatives. It was shown, after detailed optimization study, that the formation of amides and ketoamides is strongly influenced by the reaction conditions. Performing the reactions at 40 bar of carbon monoxide pressure in the presence of Pd(OAc)2/2 PPh3, the corresponding 2-ketocarboxamides were formed as major products (up to 63%). When the monodentate triphenylphosphine was replaced by the bidentate XantPhos, the quinoline-6-carboxamide derivatives were synthesized almost exclusively under atmospheric conditions (up to 98%). The isolation and characterization of the new carbonylated products of various structures were also accomplished. Furthermore, the structure of three new mono- and double-carbonylated compounds were unambiguously established by using a single-crystal XRD study.

DFT Study on the Mechanism of Iron-Catalyzed Diazocarbonylation.

The mechanism of the carbonylation of diazomethane in the presence of iron-carbonyl-phosphine catalysts has been investigated by means of DFT calculations at the M06/def-TZVP//B97D3/def2-TZVP level of theory, in combination with the SMD solvation method. The reaction rate is determined by the formation of the coordinatively unsaturated doublet-state Fe(CO)3(P) precursor followed by the diazoalkane coordination and the N2 extrusion. The free energy of activation is predicted to be 18.5 and 28.2 kcal/mol for the PF3 and PPh3 containing systems, respectively. Thus, in the presence of less basic P-donor ligands with stronger π-acceptor properties, a significant increase in the reaction rate can be expected. According to energy decomposition analysis combined with natural orbitals of chemical valence (EDA-NOCV) calculations, diazomethane in the Fe(CO)3(phosphine)(η1-CH2N2) adduct reveals a π-donor-π-acceptor type of coordination.

Weak Interaction of the Antimetabolite Drug Methotrexate with a Cavitand Derivative.

Formation of inclusion complexes involving a cavitand derivative (as host) and an antimetabolite drug, methotrexate (as guest) was investigated by photoluminescence measurements in dimethyl sulfoxide solvent. Molecular modeling performed in gas phase reflects that, due to the structural reasons, the cavitand can include the methotrexate in two forms: either by its opened structure with free androsta-4-en-3-one-17α-ethinyl arms or by the closed form when all the androsta-4-en-3-one-17α-ethinyl arms play role in the complex formation. Experiments reflect enthalpy driven complex formation in higher temperature range while at lower temperature the complexes are stabilized by the entropy gain.

Solvent Switched Weak Interaction of a 4-Quinazolinone with a Cavitand Derivative.

Interaction of 4-quinazolinone with tetrakis (3,5-dicarboxylatophenoxy)-cavitand derivative has been studied in methanol and dimethylformamide media using fluorescence spectroscopy and molecular modeling methods. Results show temperature dependent complex formation: either the entropy gain or the high enthalpy changes are responsible for the formation of stable complexes in two separated temperature regions. However, different thermodynamic parameters are associated to different conformations of the complexes: while the high entropy gain associated to the formation of deeply included guest in methanol, the high entropy gain is associated with the formation of weakly included guest in dimethylformamide solvent. This finding highlights the importance of dynamic properties of the species interacted in different solvents.

Palladium-catalyzed Sonogashira coupling reactions in γ-valerolactone-based ionic liquids.

It was demonstrated that the γ-valerolactone-based ionic liquid, tetrabutylphosphonium 4-ethoxyvalerate as a partially bio-based solvent can be utilized as alternative reaction medium for copper- and auxiliary base-free Pd-catalyzed Sonogashira coupling reactions of aryl iodides and functionalized acetylenes under mild conditions. Twenty-two cross-coupling products were isolated with good to excellent yields (72-99%) and purity (>98%). These results represent an example which proves that biomass-derived safer solvents can be utilized efficiently in common, industrially important transformations exhibiting higher chemical and environmental efficiency.

Dynamic Response of Long Rectangular Floors Subjected to Periodic Force Excitation.

Since damping in lightweight floors is usually low, dynamic amplification can be rather high. Long rectangular plates subjected to concentrated loads are often investigated by a replacement beam with a so called "effective width". Although this approach is a reliable tool for static loads, the steady-state dynamic response of beams and long plates subjected to periodic loads are significantly different. The maximum displacements and accelerations of beams (and of not-long rectangular plates) are obtained by using a dynamic amplification factor, which in the case of resonance is equal to 1 / 2 ξ , where ξ is the damping ratio. For long plates (and for not-long orthotropic rib-stiffened plates), as discussed in the paper, the response and the amplification factor are substantially different from those of beams. Hence, design based on effective width may lead to 2-4 times higher acceleration than the real values. In an economic design, to avoid unnecessary damping enhancement, this effect must be taken into account.

Computational Characterization of Bidentate P-Donor Ligands: Direct Comparison to Tolman's Electronic Parameters.

The applicability of two types of transition-metal carbonyl complexes as appropriate candidates for computationally derived Tolman's ligand electronic parameters were examined with density functional theory (DFT) calculations employing the B97D3 functional. Both Pd(0)L2(CO) and HRh(I)L2(CO) complexes correlated well with the experimental Tolman Electronic Parameter scale. For direct comparison of the electronic effects of diphosphines with those of monophosphines, the palladium-containing system is recommended. The t r a n s influence of various phosphines did not show a major difference, but the decrease of the H-Rh-P angle from linear can cause a significant change.

Carboxamido steroids inhibit the opening properties of transient receptor potential ion channels by lipid raft modulation.

Transient Receptor Potential (TRP) cation channels, like the TRP Vanilloid 1 (TRPV1) and TRP Ankyrin 1 (TRPA1), are expressed on primary sensory neurons. These thermosensor channels play a role in pain processing. We have provided evidence previously that lipid raft disruption influenced the TRP channel activation, and a carboxamido-steroid compound (C1) inhibited TRPV1 activation. Therefore, our aim was to investigate whether this compound exerts its effect through lipid raft disruption and the steroid backbone (C3) or whether altered position of the carboxamido group (C2) influences the inhibitory action by measuring Ca2+ transients on isolated neurons and calcium-uptake on receptor-expressing CHO cells. Membrane cholesterol content was measured by filipin staining and membrane polarization by fluorescence spectroscopy. Both the percentage of responsive cells and the magnitude of the intracellular Ca2+ enhancement evoked by the TRPV1 agonist capsaicin were significantly inhibited after C1 and C2 incubation, but not after C3 administration. C1 was able to reduce other TRP channel activation as well. The compounds induced cholesterol depletion in CHO cells, but only C1 induced changes in membrane polarization. The inhibitory action of the compounds on TRP channel activation develops by lipid raft disruption, and the presence and the position of the carboxamido group is essential.

Palladium-Catalyzed Synthesis of Amidines via tert-Butyl isocyanide Insertion.

Para-substituted iodobenzenes were reacted with tert-butyl isocyanide and piperidine as nucleophiles in the presence of palladium-diphosphine catalysts. Both single and double insertion of the isocyanide was observed and the corresponding amidines and ketimine-amidines were obtained in yields of practical interest. With the increase of the tert-butyl isocyanide/iodobenzene ratio, 100% chemoselectivity toward the ketimine-amidine was achieved. The formation of the products was rationalized on the basis of a catalytic cycle analogous to that of the aminocarbonylation reactions. Clear connection was found between the activity and the electronic structure of the proposed catalyst Pd(diphosphine) by computational studies, as the more negative partial charge on palladium resulted in higher conversion. Among five isocyanide substrates, only tert-butyl isocyanide was proved to be active.