A novel all-organic microcapsule with excellent long-term antibacterial and anti-corrosion performances.

This work successfully synthesized the salicylic acid@polyurea-formaldehyde (SA@PUF) microcapsules with PUF microcapsules as shell material and SA as core material. The loading content of SA in the PUF microcapsules was approximately 40 %. The SA@PUF microcapsules had excellent long-term antibacterial properties because the PUF microcapsules controlled the release of SA antifouling agents with the ability to induce reactive oxygen species generation and inactivate bacteria. The antibacterial efficiency of SA@PUF microcapsules after 35 days against Staphylococcus aureus and Pseudomonas aeruginosa remained at 80 % and 81 %, increased by 60 % and 62 % compared with pure SA, respectively. The impedance modulus at 0.01 Hz of the SA@PUF coating reached 5.51 GΩ cm2, much higher than blank coating (2.55 GΩ cm2) and PUF coating (4.94 GΩ cm2), indicating that the anti-corrosion property of the SA@PUF coating was much better. This work would contribute to developing novel coatings with long-term antibacterial activity and excellent anti-corrosion performance.

In situ synthesis of 2D/2D MXene-COF heterostructure anchored with Ag nanoparticles for enhancing Schottky photocatalytic antibacterial efficiency under visible light.

It is a major challenge to combine the advantages of two kinds of two-dimensional materials to construct a heterojunction and achieve efficient photocatalytic antifouling. In this work, we covalently connected two materials MXenes and covalent organic frameworks (COFs) through the Schiff base reaction and anchored Ag nanoparticles (NPs) to prepare a Ti3C2/TpPa-1/Ag composite material with high efficiency bactericidal properties. The covalent bonding between MXene and COF greatly improved the stability of the material. Ti3C2/TpPa-1/Ag composite showed an excellent antibacterial property against S. aureus and P. aeruginosa. The fluorescence spectra of Ti3C2/TpPa-1/Ag proved that the electron transfer channels formed between the ternary materials could greatly improve the efficiency of carrier separation and prolong the life of photogenerated carriers. Density functional theory calculations showed that the synergistic catalytic effect of Ag and Ti3C2 could greatly reduce the work function along the interface, and the built-in electric field between the layers drive carrier fast migration, which effectively improve the catalytic performance.

Effect of covalent organic framework modified graphene oxide on anticorrosion and self-healing properties of epoxy resin coatings.

Graphene oxide (GO) can enhance the corrosion resistance of epoxy coating, but there are problems such as poor filler dispersion and mechanical damage that will reduce the coating corrosion resistance. To resolve these problems, here, we used a facile and green liquid-phase synthetic strategy to grow covalent organic framework (COF) on GO sheets with 1,3,5-Triformylphloroglucinol and p-phenylenediamine as monomers for the COF synthesis. The COF could not only improve the compatibility of GO with epoxy coating, but also act as a nanocontainer for loading corrosion inhibitors. Electrochemical impedance spectroscopy showed that the low-frequency impedance of GO/COF-2% coating immersed in 3.5 wt% NaCl solution for 60 days was 8.58 × 108 Ω cm2. This was one order of magnitude higher than that of GO-2%, showing excellent corrosion resistance. Then, corrosion inhibitor of benzotriazole (BTA) was loaded into GO/COF, where the adsorption and release of BTA was controlled by environmental pH values. Results proved that the GO/COF@BTA-2% reinforced epoxy coating had superior corrosion resistance as well as self-healing ability because of the good compatibility, greater crosslinking density and controllable release of BTA.

Facile synthesis of BTA@NiCo2O4 hollow structure for excellent microwave absorption and anticorrosion performance.

A three-dimensional hollow NiCo2O4 structure was successfully prepared with a precipitation-hydrothermal method. A balance between magnetic and dielectric losses was achieved by using a hollow NiCo2O4 structure loaded with benzotriazole (BTA), and thus the performance of electromagnetic waves was attenuated. The minimum reflection loss value of BTA@NiCo2O4 at 16.01 GHz was -35.39 dB when the absorber thickness was 2 mm, at which the absorption bandwidth for an RL of less than -10 dB is as high as 4.64 GHz. The absorption mechanism was characterized by the synergy among interfacial polarization, multiple reflection, and dipole polarization enhancement between NiCo2O4 and BTA. Interestingly, the epoxy/BTA@NiCo2O4 coating not only exhibited an outstanding microwave absorption (MA) performance but also has excellent anticorrosion and self-healing properties, as shown by the results of electrochemical impedance spectroscopy and confocal laser scanning microscopy. This work would be very helpful to the development of novel coatings with excellent MA performance and anticorrosion and self-healing properties.