Tailored Metal-Organic Frameworks for Water Purification: Perfluorinated Fe-MOFs for Enhanced Heterogeneous Catalytic Ozonation.

An industrially viable catalyst for heterogeneous catalytic ozonation (HCO) in water purification requires the characteristics of good dispersion of active species on its surface, efficient electron transfer for ozone decay, and maximum active species utilization. While metal-organic frameworks (MOFs) represent an attractive platform for HCO, the metal nodes in the unmodified MOFs exhibit low catalytic activity. Herein, we present a perfluorinated Fe-MOF catalyst by substituting H atoms on the metalated ligands with F atoms (termed 4F-MIL-88B) to induce structure evolution. The Lewis acidity of 4F-MIL-88B was enhanced via the formation of Fe nodes, tailoring the electron distribution on the catalyst surface. As a result of catalyst modification, the rate constant for degradation of the target compounds examined increased by ∼700% compared with that observed for the unmodified catalyst. Experimental evidence and theoretical calculations showed that the modulated polarity and the enhanced electron transfer between the catalyst and ozone molecules contributed to the adsorption and transformation of O3 to •OH on the catalyst surface. Overall, the results of this study highlight the significance of tailoring the metalated ligands to develop highly efficient and stable MOF catalysts for HCO and provide an in-depth mechanistic understanding of their structure-function evolution, which is expected to facilitate the applications of nanomaterial-based processes in water purification.

Investigation of the deactivation and regeneration of an Fe2O3/Al2O3•SiO2 catalyst used in catalytic ozonation of coal chemical industry wastewater.

Catalyst deactivation is an ongoing concern for industrial application of catalytic ozonation processes. In this study, we systematically investigated the performance of a catalytic ozonation process employing Fe2O3/Al2O3•SiO2 catalyst for the treatment of coal chemical industry (CCI) wastewater using pilot-scale and laboratory-scale systems. Our results show that the activity of the Fe2O3/Al2O3•SiO2 catalyst for organic contaminant removal deteriorated over time due to formation of a dense and thin carbonaceous layer on the Fe2O3 catalyst surface. EPR and fluorescence imaging analysis confirm that the passivation layer essentially inhibited the O3-catalyst interaction thereby minimizing formation of surficial •OH and associated oxidation of organic contaminants on the catalyst surface. Calcination was demonstrated to be effective in restoring the activity of the catalyst since the carbonaceous layer could be efficiently combusted during calcination to re-establish the surficial •OH-mediated oxidation process. The combustion of the carbonaceous layer and restoration of the Fe layer on the surface on calcination was confirmed based on SEM-EDX, FTIR and thermogravimetric analysis. Cost analysis indicates that regeneration using calcination is economically viable compared to catalyst replacement. The results of this study are expected to pave the way for developing appropriate regeneration techniques for deactivated catalysts and optimising the catalyst synthesis procedure.

Heterogenous Iron Oxide Assemblages for Use in Catalytic Ozonation: Reactivity, Kinetics, and Reaction Mechanism.

Heterogeneous catalytic ozonation (HCO) has gained increasing attention as an effective process to remove refractory organic pollutants from industrial effluents. However, widespread application of HCO is still limited due to the typically low efficacy of catalysts used and matrix passivation effects. To this end, we prepared an Al2O3-supported Fe catalyst with high reactivity via a facile urea-based heterogeneous precipitation method. Due to the nonsintering nature of the preparation method, a heterogeneous catalytic layer comprised of γ-FeOOH and α-Fe2O3 is formed on the Al2O3 support (termed NS-Fe-Al2O3). On treatment of a real industrial effluent by HCO, the presence of NS-Fe-Al2O3 increased the removal of organics by ∼100% compared to that achieved with a control catalyst (i.e., α-Fe2O3/Al2O3 or γ-FeOOH/Al2O3) that was prepared by a conventional impregnation and calcination method. Furthermore, our results confirmed that the novel NS-Fe-Al2O3 catalyst demonstrated resistance to the inhibitory effect of high concentration of chloride and sulfate ions usually present in industrial effluent. A mathematical kinetic model was developed that adequately describes the mechanism of HCO process in the presence of NS-Fe-Al2O3. Overall, the results presented here provide valuable guidance for the synthesis of effective and robust catalysts that will facilitate the wider industrial application of HCO.

Management of concentrate and waste streams for membrane-based algal separation in water treatment: A review.

Frequent occurrence of harmful algal blooms (HABs) and red tides in freshwater and seawater poses serious threats to water treatment and drives the application of membrane-based technologies in algal separation. Despite the high removal efficiency of algal cells and their metabolites (e.g. organic matter and toxins) by membranes, the generation of concentrate and waste streams presents a major challenge. In this paper, we review the scenarios under which membrane-based processes are integrated with algal separation, with particular attention given to (i) drinking water production and desalination at low algal concentrations and (ii) cyanobacteria-laden water treatment/desalination. The concentrate and waste streams from backwashing and membrane cleaning in each scenario are characterised with this information facilitating a better understanding of the transport of algal cells and metabolites in membrane processes. Current strategies and gaps in managing concentrate and waste streams are identified with guidance and perspectives for future studies discussed in an Eisenhower framework.

Mechanistic insights into the catalytic ozonation process using iron oxide-impregnated activated carbon.

In the present study, radiolabelled formate was used as a probe compound in order to gain mechanistic insight into the catalytic ozonation process using a commercially available iron oxide-impregnated activated carbon catalyst. We simultaneously analysed the adsorptive and oxidative removal of formate in order to determine the contribution of the catalyst to adsorption and oxidant generation processes respectively. Our results show that the presence of the catalyst enhanced ozone decay as well as the rate and extent of formate oxidation at pH 3.0 compared to that observed in the presence of ozone alone as a result of oxidant generation via O3-Fe oxide interaction. A reduction in rate and extent of formate oxidation on addition of t-butanol and Cl- (known hydroxyl radical (•OH) scavengers under acidic conditions) provides evidence that the oxidant generated during catalytic ozonation at pH 3.0 is •OH. Moreover, the oxidation of formate during catalytic ozonation mostly occurs at the solid-liquid interface and/or in bulk solution with adsorption playing no role in the overall oxidation process with this finding supported by the exceptionally high oxidation efficiency compared to the extent of adsorption observed when no O3 was added. While catalytic ozonation was effective in formate oxidation at pH 3.0, the presence of the catalyst did not lead to an increase in either the rate or extent of formate oxidation at pH 7.3 and 8.5 suggesting that only protonated iron oxide surface sites generate strong oxidant(s) on interaction with O3. Based on our understanding of the processes operating during the ozonation and catalytic ozonation processes, a mathematical model has been developed that adequately describes the experimental results obtained here. Overall, this study shows that systematic measurement of ozone decay, removal of the parent compound as well as formation of the oxidized products under well controlled conditions are required for unequivocal elucidation of the mechanism of catalytic ozonation.

Effect of the Presence of Carbon in Ti4O7 Electrodes on Anodic Oxidation of Contaminants.

Magnéli phase titanium suboxide, Ti4O7, has attracted increasing attention as a potential electrode material in anodic oxidation as a result of its high efficiency and (electro)chemical stability. Although carbon materials have been amended to Ti4O7 electrodes to enhance the electrochemical performance or are present as an unwanted residual during the electrode fabrication, there has been no comprehensive investigation of how these carbon materials affect the electrochemical performance of the resultant Ti4O7 electrodes. As such, we investigated the electrochemical properties of Ti4O7 electrodes impregnated with carbon materials at different contents (and chemical states). Results of this study showed that while pure Ti4O7 electrodes exhibited an extremely low rate of interfacial electron transfer, the introduction of minor amounts of carbon materials (at values as low as 0.1 wt %) significantly facilitated the electron transfer process and decreased the oxygen evolution reaction potential. The oxygen-containing functional groups have been shown to play an important role in interfacial electron transfer with moderate oxidation of the carbon groups aiding electron uptake at the electrode surface (and consequently organic oxidation) while the generation of carboxyl groups-a process that is likely to occur in long-term operation-increased the interfacial resistance and thus retarded the oxidation process. Results of this study provide a better understanding of the relationship between the nature of the electrode surface and anodic oxidation performance with these insights likely to facilitate improved electrode design and optimization of operation of anodic oxidation reactors.