RESUMO
This work examines the influence of the degradation behaviors of biotic and abiotic conditions on three types of biodegradable products: cups from PLA and from cellulose, and plates from sugarcane. The main objective of this study was to evaluate if biodegradable products can be degraded in composts that were stabilized by backyard composting. Furthermore, the impact of crucial abiotic parameters (temperature and pH) for the degradation behaviors process was investigated. The changes in the biopolymers were analyzed by FTIR spectroscopy. This work confirmed that abiotic and biotic conditions are important for an effective disintegration of the investigated biodegradable products. Under abiotic conditions, the degradation behaviors of PLA were observable under both tested temperature (38 and 59 °C) conditions, but only at the higher temperature was complete disintegration observed after 6 weeks of incubation in mature compost. Moreover, our research shows that some biodegradable products made from cellulose also need additional attention, especially with respect to incorporated additives, as composting could be altered and optimal conditions in composting may not be achieved. This study shows that the disintegration of biodegradable products is a comprehensive process and requires detailed evaluation during composting. The results also showed that biodegradable products can also be degraded post composting and that microplastic pollution from biodegradable polymers in soil may be removed by simple physical treatments.
RESUMO
Torrefaction constitutes one of the promising technologies for the management of waste biomass and the production of high-carbon products for combustion, gasification, adsorption of pollutants or soil treatment. Unfortunately, waste biomass may be contaminated with toxic persistent organic pollutants, such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) and dioxin-like biphenyls (dl-PCB). Literature does not provide consistent measurements on how the low-temperature thermochemical processing, such as torrefaction, affects the toxicity of biomass. This contribution assesses how a torrefaction treatment, conducted at 200 °C, modifies the toxicity due to PCDD/PCDF/dl-PCB in biomass. We deploy the XDS-CALUX biotest on five types of waste biomass (sewage sludge, tree bark, cattle manure, spent coffee ground, common reed), before and after treatment. The content of total dioxin- & biphenyl fraction compounds in the raw biomass, investigated in this study, varies from 0.14 to 3.67 pg BEQ·g-1d.m., and in the torrefied biomass between 0.17 and 6.00 pg BEQ·g-1d.m.; BEQ stands for bioanalytical equivalent. This increase is statistically insignificant at p = 0.05, taking into account all types of examined biomass. This proves that low-temperature torrefaction cannot detoxify biomass, i.e., chars, produced from biomass characterized by elevated concentration of PCDD/PCDF/dl-PCB, will reflect the contamination of the feedstocks. With respect to heavy metals, we conclude that only the content of Cd in biomass, and, to a lesser extent, the abundance of Cu and Fe, modify the toxicity of this material during its thermochemical treatment at low temperature.