Comparison between direct and indirect "digital image" dental visual shade matching considering the effect of clinical experience and gender.

INTRODUCTION: Shade matching is an essential procedure to obtain an esthetic prosthesis. The Direct Visual Shade Matching (DSM) method using shade guides is the most used method by dentists. However, The Indirect Visual Digital Shade Matching (ISM) method based on digital imaging is concerned to be reliable and useful in determining shade matching in dental practice. Several factors such as method, clinical experience, and gender can affect the success of shade matching. AIM OF THE STUDY: This study aimed to compare these two methods and evaluate the effect of experience and gender on the results. MATERIALS AND METHODS: Three volunteers' maxillary central incisor teeth were evaluated using (DSM) and (ISM) methods by 87 examiners (42 males, 45 females). These examiners were further divided into three groups based on their clinical experience: Undergraduate Preclinical Dental Students (UPDS) with 31 examiners, Undergraduate Clinical Dental Students (UCDS) with 34 examiners, and Postgraduate Dental Students from the Department of Prosthodontics (PDS) with 22 examiners. The spectrophotometer device results of three teeth were considered as a reference for shade matching. Statistical analyses of the data were performed using Kruskal-Wallis, Mann-Whitney U, and Chi-square tests. RESULTS: No significant difference was found between indirect and direct methods according to Perfect Matches (p > 0.05). However, according to Shade Matching Deviation Score (SMDS) values a statistically significant difference was found between the two methods where the best result was obtained with the ISM method (p < 0.05). There was a significant difference between the PDS group and the other two groups in terms of clinical experience (p < 0.05). There was no significant difference between gender groups (p > 0.05). CONCLUSION: Digital images, captured under standardized lighting conditions, may serve as a reliable alternative method for direct shade matching. The (ISM) method requires a camera, related accessories, and computer skills. However, as these tools are commonly available nowadays, the focus for practitioners should be on effectively learning and applying these tools to achieve the best results. While clinical experience plays a significant role in the shade matching process, gender does not appear to have a substantial influence. CLINICAL SIGNIFICANCE: This study found no significant differences between the (DSM) and (ISM) methods, leaving the clinical relevance of this method open to debate. However, the ISM method yielded superior responses. Despite requiring specialized tools, conditions, and training, the widespread use of cameras and computers in modern clinics makes the necessary equipment and software readily available. This method enhances clinician-technician communication, potentially improving prosthesis esthetics and patient satisfaction, especially for less experienced clinicians or those with color deficiencies. Further research is crucial to determine its clinical significance.

The quality evaluation of the laurel leaf samples sold in the market under the name of "Defne Yapragi".

Laurus nobilis L. is an aromatic shrub or tree, Mediterranean element. The leaves are employed as a spice and for medicinal purposes. It is known by various names in Turkey, such as "defne, har and tehnel." In this study, 15 different laurel leaf samples were purchased from 6 different cities in Turkey, diagnosed, and evaluated in terms of quality. The conditions of use and sale of these samples were evaluated. The essential oils obtained from the leaf samples were analyzed, and their physical properties such as density, refractive index, and optical rotation were determined. In the chemical composition of the oils, 1,8-cineole (41.2-64.4%), sabinene (1.5-15.9%), and α-terpinyl acetate (1.5-15%) have been found to be the major components. However, in one station, the presence of 1,8-cineole was not be determined. Laurel leaf drugs offered for sale in some provinces of Turkey were purchased from the market and their morphological characteristics and essential oil profiles were examined and evaluated in terms of public health. It was determined that these samples should be standardized and quality-controlled before being released to the market.

Comparison of the Micro-Shear Bond Strength of Resin Cements to CAD/CAM Glass Ceramics with Various Surface Treatments.

This study aimed to compare the effect of acid etching, sandblasting, or silica coating on the micro-shear bond strength of dual-cured resin cements to computer-aided design and computer-aided manufacturing (CAD/CAM) glass ceramic materials. Feldspathic, lithium disilicate, and zirconia-reinforced CAD/CAM ceramics were divided into four groups: control group (C), no surface treatment; hydrofluoric (HF) group, 5% HF acid-etched; sandblasting (SB) group, abraded with 50 µm aluminum oxide (Al2O3) particles; silica-coated (CJ) group, abraded with 30 µm silica-modified Al2O3 particles. Roughness values were obtained by using a profilometer. The cements were condensed on the surface-treated specimens and a micro-shear bond test was conducted. The ceramic material (p < 0.001) and surface treatment type (p < 0.001) significantly affected the micro-shear bond strength values. HF acid etching can be recommended for the surface pretreatment of feldspathic, lithium disilicate, and zirconia-reinforced CAD/CAM ceramics. Better bond strengths can be obtained with HF acid etching than with sandblasting and silica coating.

Influences of Toothbrushing and Different Toothpastes on the Surface Roughness and Color Stability of Interim Prosthodontic Materials.

The surface properties and color stability of interim crown materials may vary depending on the toothbrushing procedure. This study aimed to investigate the effects of toothbrushing and different toothpastes on the surface roughness (Ra) and color stability of different interim crown materials. Disc-shaped specimens were prepared from four interim crown materials (Tab 2000 (ChPM), Imident (LaPM), Protemp 4 (ChDM), and Telio-CAD (CadPM)). Specimens were divided into four subgroups for the control group (Cnt) and for simulated toothbrushing with distilled water (Dw) or with two different toothpastes (whitening toothpaste (WTp), activated charcoal toothpaste (ACTp)). The specimens' Ra values were measured before and after 10,000 cycles of toothbrushing. The color parameters were measured and the color differences (ΔE00) were calculated. Data were statistically analyzed by two-way analysis of variance (ANOVA) and Tukey's HSD tests. A significant increase in the Ra values was observed after toothbrushing, except for the LaPM_Dw, ChDM_Dw, and all the CadPM specimens (p < 0.05). Toothbrushing with toothpastes increased the ΔE00 values of all ChPM and ChDM interim materials (p < 0.05). Before and after all toothbrushing procedures, the CadPM specimens had smoother and ChPM specimens had rougher surfaces than the other interim materials. The two tested toothpastes had similar effects on the Ra of all interim materials. Non-perceivable color changes were seen only with the CadPM_Dw group.

The effects of the ethanol extract of Cordia myxa leaves on the cognitive function in mice.

BACKGROUND: Cordia myxa L. (Boraginaceae) is widely distributed in tropical regions and it's fruits, leaves and stem bark have been utilized in folk medicine for treating trypanosomiasis caused by Trypanosoma cruzi. A population-based study showed that T. cruzi infection is associated with cognitive impairments. Therefore, if C. myxa has ameliorating activities on cognitive function, it would be useful for both T. cruzi infection and cognitive impairments. METHODS: In this study, we evaluated the effects of an ethanol extract of leaves of C. myxa (ELCM) on memory impairments and sensorimotor gating deficits in mice. The phosphorylation level of protein was observed by the Western blot analysis. RESULTS: The administration of ELCM significantly attenuated scopolamine-induced cognitive dysfunction in mice, as measured by passive avoidance test and novel object recognition test. Additionally, in the acoustic startle response test, we observed that the administration of ELCM ameliorated MK-801-induced prepulse inhibition deficits. We found that these behavioral outcomes were related with increased levels of phosphorylation phosphatidylinositol 3-kinase (PI3K), protein kinase B (Akt) and glycogen synthase kinase 3 beta (GSK-3ß) in the cortex and extracellular signal-regulated kinase (ERK) and cAMP response element-binding protein (CREB) in the hippocampus by western blot analysis. CONCLUSIONS: These results suggest that ELCM would be a potential candidate for treating cognitive dysfunction and sensorimotor gating deficits observed in individuals with neurodegenerative diseases.

Surface roughness and Streptococcus mutans adhesion on surface sealant agent coupled interim crown materials after dynamic loading.

BACKGROUND: With the application of surface sealant agents, smooth surfaces can be achieved in a shorter time when compared with conventional polishing. However, studies on the performance of these agents against chewing forces are not many. The purpose of this study was to evaluate the surface roughness and Streptococcus mutans adhesion on surface sealent coupled interim prosthetic materials after chewing simulation. METHODS: One hundred and twelve specimens were fabricated from two poly(methyl methacrylate) (Tab 2000, Dentalon Plus) and two bis-acryl (Tempofit, Protemp 4) interim crown materials and divided into 4 groups (n = 7) according to applied surface treatment: conventional polishing (control) and 3 surface sealant (Palaseal, Optiglaze, Biscover) coupling methods. The surface roughness values (Ra) were measured with a profilometer before (Ra0) and after aging through dynamic loading in a multifunctional chewing simulator for 10,000 cycles at 50 N load combined with integral thermocycling (between 5 and 55 °C) (Ra1). Specimens were incubated with Streptococcus mutans suspension and the total number of adherent bacteria was calculated by multiplying the counted bacterial colonies with the dilution coefficient. RESULTS: Surface sealant agent application significantly decreased the surface roughness compared with conventionally polished specimens, except for Optiglaze or BisCover LV applied Protemp 4 and Palaseal or Biscover LV applied Tempofit. Surface roughness after dynamic loading showed a statistically significant increase in all groups, except for the control groups of Tab 2000 and Protemp 4. A positive correlation was found between surface roughness values of interim prosthodontic materials and the quantitiy of Streptococcus Mutans. CONCLUSIONS: Even though surface sealant agent application significantly decreased the surface roughness compared with conventionally polished specimens, dynamic loading significantly increased the surface roughness of all surface sealant coupled materials. The Ra values of all test groups were higher than the plaque accumulation threshold (0.20 µm). Streptococcus mutans adhered more on rougher surfaces.

Effect of simulated tootbrushing on surface roughness of sealant agent coupled nanohybrid composite resins.

OBJECTIVE: To investigate the effect of toothbrushing on the surface roughness (Ra ) of different sealant agent coupled nanohybrid composite resins. MATERIALS AND METHODS: One hundred sixty disc-shaped (10 × 2 mm) specimens were prepared from four different nanohybrid composite resins (Z-550, Tetric EvoCeram, Clearfill Majesty, Ice). Specimen groups were divided into four subgroups for conventional polishing (control) and to apply three different surface sealant agents (Palaseal, Optiglaze, Biscover LV) (n = 10). The Ra values of the specimens were recorded before (Ra 0) and after 10,000 cycles of toothbrushing (Ra 1). The surface properties of the specimens were evaluated with scanning electron microscope (SEM). Data were statistically analyzed by two-way analysis of variance (ANOVA), Tukey HSD, and paired sample t tests. RESULTS: Composite resin material, surface treatment, and their interaction were significant on Ra values (p < 0.001). Significant decrease in Ra 0 values observed for surface sealant agent coupled Clearfill Majesty and Tetric EvoCeram composite resin groups compared with the control groups (p < 0.05). After simulated one-year toothbrushing, the control group of Clearfill Majesty had the highest Ra 1 value (p < 0.001). The Ra 1 values of all groups were significantly higher than the Ra 0 values (p < 0.05). CONCLUSIONS: Simulated 1-year toothbrushing increased the surface roughness of all nanohybrid composite resin materials. Optiglaze and Biscover LV sealant agents on Tetric EvoCeram, and all tested sealant agents on Clearfill Majesty enabled smoother surfaces than conventional polishing after toothbrushing. CLINICAL SIGNIFICANCE: Because toothbrushing increases the surface roughness of tested nanohybrid composite resins, the application of surface sealant agents on some of the tested resins can be considered for smoother surfaces.

In vitro inhibitory potential of avocado fruits, Persea americana (Lauraceae) against oxidation, inflammation and key enzymes linked to skin diseases / Inhibidor potencial in vitro de frutos de aguacate, Persea americana (Lauraceae) contra la oxidación, inflamación y enzimas clave vinculadas a enfermedades de la piel

Abstract Introduction: Avocado (Persea americana Mill.) is a member of Lauraceae with one-seeded berry fruit and cultivated in all tropical, subtropical regions in the world and in the Southern coast region of Turkey. Oxidative damage caused by UV can trigger inflammation, resulting in serious inflammatory skin diseases including eczema, seborrheic dermatitis, hyperpigmentation and ageing. Enzyme inhibitors involved in melanogenesis, such as tyrosinase, have been used recently for hyperpigmentation and skin diseases in cosmetic products. Objective: This study aimed to evaluate the antioxidant, anti-inflammatory, anti-tyrosinase activities and total polyphenolic contents of the different parts of P. americana fruit. Methods: The fruit was divided into exocarp, mesocarp, seed, and then methanol and n-hexane extracts were prepared. DPPH and ABTS free radical scavenging capacities and inhibitory potentials on lipid peroxidation were determined to investigate the antioxidant potentials of the extracts. Anti-inflammatory activities of the extracts were evaluated by measuring the stabilization level of the human red blood cell membrane. The tyrosinase inhibitory activities of the samples were determined using mushroom tyrosinase. Results: In general methanol extracts possessed remarkable higher DPPH free radical scavenging activities than n-hexane extracts. The highest activity was determined in methanol extracts of seed (4.17 ± 0.04 mg/mL) followed by exocarp (5.25 ± 0.05 mg/mL). Overall methanol extracts possessed higher ABTS free radical scavenging activities than n-hexane extracts. The greatest ABTS free radical scavenging activity was obtained in methanol extracts of seed (0.03 ± 0.01 mg/mL). In the anti-lipid peroxidation assay, the greatest activity was noticed in methanol extracts of seed (7.71 ± 0.36 µg/mL) followed by exocarp (12.12 ± 0.34 µg/mL), while all n-hexane extracts were inactive. Overall methanol extracts exhibited higher anti-inflammatory and antioxidant properties than n-hexane extracts. However, the maximum anti-tyrosinase activity was determined in n-hexane extracts of exocarp (0.40 ± 0.01 mg/mL) followed by seed (0.46 ± 0.01 mg/mL). Conclusions: These extracts are promising candidates for use as natural products-based antioxidant and anti-inflammatory properties in inflammation-related disease, and also anti-tyrosinase properties in dermatological applications.

Resumen Introducción: El aguacate (Persea americana Mill.) es un miembro de Lauraceae, es una baya de una semilla que se cultiva en todas las regiones tropicales y subtropicales del mundo y la región costera sur de Turquía. El daño oxidativo causado por los rayos ultravioleta puede desencadenar inflamación, lo que posteriormente da como resultado enfermedades inflamatorias graves de la piel como eccema, dermatitis seborreica, hiperpigmentación y envejecimiento. Los inhibidores de enzimas implicados en la melanogénesis, como la tirosinasa, se han utilizado recientemente para la hiperpigmentación y enfermedades de la piel en productos cosméticos. Objetivo: Evaluar las actividades antioxidantes, antiinflamatorias, antitirosinasas y los contenidos polifenólicos totales de las partes del fruto de P. americana. Métodos: El fruto se dividió en tres partes: exocarpio, mesocarpio y semilla, y se prepararon extractos de metanol y n-hexano. Se determinaron las capacidades de eliminación de radicales libres de DPPH y ABTS y los potenciales inhibidores sobre la peroxidación de lípidos para investigar los potenciales antioxidantes de los extractos. Las actividades antiinflamatorias de los extractos se evaluaron midiendo el nivel de estabilización de la membrana de los glóbulos rojos humanos. Las actividades inhibidoras de tirosinasa de las muestras se determinaron utilizando tirosinasa de hongos. Resultados: En general, los extractos de metanol poseían actividades de eliminación de radicales libres de DPPH notablemente más altas que los extractos de n-hexano. La actividad más alta se presentó en extractos metanólicos de semilla (4.17±0.04 mg/mL) seguido del exocarpio (5.25±0.05 mg/mL). En general, los extractos de metanol poseían una mayor actividad de eliminación de radicales libres ABTS que los extractos de n-hexano. La mayor actividad captadora de radicales libres de ABTS se obtuvo en extractos metanólicos de semilla (0.03±0.01 mg/mL). En el ensayo de anti-peroxidación lipídica, la mayor actividad se observó en los extractos metanólicos de semillas (7.71±0.36 µg/mL) seguidos del exocarpio (12.12±0.34 µg/mL), mientras que todos los extractos de n-hexano estaban inactivos. En general, los extractos de metanol exhibieron mayores propiedades anti-inflamatorias y antioxidantes que los extractos de n-hexano. Sin embargo, la actividad anti-tirosinasa máxima se determinó en extractos de exocarpio de n-hexano (0.40±0.01 mg/mL) seguido de semillas (0.46±0.01 mg/mL). Conclusiones: Estos extractos son candidatos prometedores como productos naturales debido a sus propiedades antioxidantes y antiinflamatorias para tratar enfermedades relacionadas con la inflamación, y también propiedades antitirosinasas en aplicaciones dermatológicas.

Comparative study of the phenolic profile, antioxidant and antimicrobial activities of leaf extracts of five Juniperus L. (Cupressaceae) taxa growing in Turkey.

The purpose of this study was to conduct a comparative evaluation of some biological properties of methanol and water extracts of leaves of five Juniperus taxa growing in Turkey: J. communis L. var. communis (Jcc), J. communis L. var. saxatilis Pall. (Jcs), J. drupacea Labill. (Jd), J. oxycedrus L. subsp. oxycedrus (Joo), J. oxycedrus L. subsp. macrocarpa (Sibth. & Sm.) Ball. (Jom). The antioxidant properties were examined in vitro; both in the DPPH and in the reducing power tests, Joo methanol extract resulted the most active (IC50 = 0.09 ± 0.01mg/mL and ASE/mL = 2.56 ± 0.06). In the TBA assay, Jcs methanol extract exhibited the highest activity (IC50 = 4.39 ± 0.47 µg/mL). The extracts displayed bacteriostatic activity against Staphylococcus aureus, and Jd methanol extract resulted the most effective (MIC = 19.53 µg/mL); no effect on the S. aureus biofilm formation was observed. The extracts resulted non-toxic in the Artemia salina lethality bioassay. Finally, the phenolic profile of the methanol extracts was characterized by HPLC-PDA/ESI-MS.

Activity evaluation on Ribes species, traditionally used to speed up healing of wounds: With special focus on Ribes nigrum.

ETHNOPHARMACOLOGICAL RELEVANCE: Ribes species are usually evergreen shrubs, represented by eight species in Turkey. Although they are known for their fruits with commercial importance, their leaves have been used as folk remedy in various areas in Turkey by rural population owing to their wound healing potential. AIM OF THE STUDY: In the present study we aimed to assess the wound healing activity of the leaves of Ribes species growing in Turkey, namely, Ribes alpinum L., R. anatolica Behçet, R. petraeum Wulfen, R. multiflorum Kit. ex Romer & Schultes, R. nigrum L., R. orientale Desf., R. rubrum L., R. uva-crispa L. MATERIALS AND METHODS: Wounds were surgically induced on the dorsal parts of the rats and mice. Prepared herbal ointments were topically applied onto the wounds once daily. The effects of the extracts were evaluated by measuring the breaking strength and percentage of reduction in wounded area by comparing the results with the registered reference ointment, FITO Krem®. Histopathological and antioxidant assays were also conducted. Since, R. nigrum was determined to be the most active species, we further investigated the wound healing potential of the subextracts of the methanol extract of R. nigrum leaves. RESULTS: R. nigrum and R. multiflorum extracts significantly increased wound breaking strength. Significant reduction in the areas was determined for the wounded tissues treated with the ointments of R. nigrum and R. multiflorum extracts. Oxidative Stress Index was found to be lowest for R. orientale, R. nigrum and R. multiflorum. Among the subextracts of R. nigrum, ethyl acetate subextract was found to have promising effect. CONCLUSIONS: Methanol extracts of leaves of R. nigrum and R. multiflorum demonstrated significant wound healing effect. We can suggest that ethyl acetate subextract of R. nigrum may be a potential candidate to be used for the development of a wound healing agent.

A Comparative Study on the in vitro Antioxidant and Antimicrobial Potentials of Three Endemic Ononis L. Species from Turkey.

OBJECTIVES: In this study, the antioxidant capacity, antimicrobial activity and phenolic contents of aerial parts and roots extracts of three endemic Ononis L. (Leguminosae) species (O. sessilifolia Bornm., O. basiadnata Hub. & Mor., O. macrosperma Hub. & Mor.) were investigated for the first time. MATERIALS AND METHODS: The phenolic contents of the extracts [water and ethanol (EtOH)] and fractions [dichloromethane, EtOAc and n-butanol] were determined using Folin-Ciocalteu's phenol reagent. Also, their antioxidant capacities were studied using qualitative DPPH˙ (1,1-diphenyl-2-picrylhdrazyl radical) and TBA assays. The antimicrobial activity of these extracts and fractions compared with standard antibiotics were studied using disc diffusion assays against various Gram-positive and Gram-negative bacteria and fungi. RESULTS: The total phenolic contents of the water extracts were found to range between 14.78-80.33 mg/g, and the EtOH extracts ranged from 67.19-145.33 mg/g. EtOAc fractions of the three species were rich in terms of total phenolic contents when compared with other extracts (242.56-620.89 mg/g). The most significant results in the TBA assays were obtained in EtOH extracts of O. macrosperma (IC50=0.13±0.17 µg/mL), O. sessilifolia (IC50=1.41±0.58 µg/mL) and root (IC50=1.96±0.39 µg/mL). CONCLUSION: EtOAc fractions rich in phenolic content were also found to be the most effective in antioxidant activity assays. Although all water extracts had no antimicrobial activity, EtOH extracts and n-butanol fractions showed generally moderate activity against bacteria. Some EtOAc fractions except for O. sessilifolia showed less activity against Escherichia coli, Staphylococcus aureus, MRSA and Candida albicans.

Influence of the color of composite resin foundation and luting cement on the final color of lithium disilicate ceramic systems.

STATEMENT OF PROBLEM: Lithium disilicate restorations are commonly used, particularly in the anterior region. The color of the underlying composite resin foundation (CRF) and luting cement may negatively affect the color of lithium disilicate ceramic restorations. PURPOSE: The purpose of this in vitro study was to investigate the effect of CRF and resin cement materials on the color of lithium disilicate ceramics in 2 different translucencies. MATERIAL AND METHODS: Twenty disks (11×1.5 mm, shade A2) were fabricated from medium-opacity (mo) (n=10) and high-translucency (ht) (n=10) lithium disilicate (Lds) blocks (IPS e.max Press). Five CRF disks (11×3 mm) were fabricated in 5 different shades (A1, A2, A3, B2, C2) and 30 resin cement disks (11×0.2 mm) in the shades of translucent (Tr), universal (Un=A2), and white-opaque (Wo). Ceramic specimens were placed on each CRF, and the resin cement combination and color was measured with a spectrophotometer. CIELAB color coordinates were recorded, and the color coordinates of both ceramics on the shades of the A2 CRF and resin cement were saved as the control. Color differences (ΔE00) between the control and test groups were calculated. Data were analyzed with 3-way analysis ANOVA and compared with the Tukey HSD test (α=.05). RESULTS: The ΔE00 values were influenced by the shades of the CRF, resin cement materials, and also their interactions (P<.05). The ΔE00 values were not affected by the ceramic type. The ΔE00 values of the Wo cement groups (1.73 to 2.96) were significantly higher than those of the other cement shades (0.88 to 1.29) for each ceramic type and CRF shade (P<.05). CONCLUSIONS: Lithium disilicate ceramics in 2 different translucencies were similarly influenced by the color of the underlying cement and CRF. When translucent and universal cement shades were used, the core shade did not affect the final color of the ceramics. White opaque cement caused clinically unacceptable color changes in both ceramics on all shades of CRFs except the C2 CRF and when high translucency ceramic was used on the A2 CRF. These changes were clinically acceptable, but perceptible.

Efficacy of denture cleaners on the surface roughness and Candida albicans adherence of sealant agent coupled denture base materials.

This study investigated the effect of denture cleansers on the surface roughness and Candida albicans adherence of surface sealant agent coupled denture base resins. One hundred and twenty specimens were fabricated from 2 polymethyl methacrylate (PMMA) (Meliodent; Acron MC) and 1 polyamide (Deflex) denture base materials, coated with a sealant agent (Palaseal) and divided into 4 groups (n=10) according to overnight cleaning procedures: distilled water (control), 5% sodium hypochlorite (NaOCl) and two different sodium perborate (Corega; Rapident). The surface roughness values were measured with a profilometer before (Ra0) and after 90 days immersion in denture cleaners (Ra1). Specimens were incubated with Candida albicans suspension and Candida colony- forming units (CFU) (Cfu/mm) were counted. Significant differences were found, between the Ra0 and Ra1 values of 5% NaOCl applied Acron MC, Deflex and also Rapident applied Deflex groups (p<0.05). Denture cleaning procedures had no significant effects on the quantitiy of Candida albicans.

Effect of surface sealant agents on the surface roughness and color stability of denture base materials.

STATEMENT OF PROBLEM: The effects of surface sealant agents on the surface roughness and color stability of denture base materials are unknown. PURPOSE: The purpose of this in vitro study was to evaluate the effects of different polishing methods on the surface roughness and color stability of denture base materials. MATERIAL AND METHODS: A total of 120 specimens were fabricated from 2 poly(methyl methacrylate) (PMMA) and 1 polyamide denture base materials and divided into 4 groups (n=10 in each group) according to the applied surface treatment procedure: conventional polishing (control) and 3 surface sealant coupling methods. Surface roughness average (Ra) values were measured using a profilometer. Color parameters were measured using a spectrophotometer before and after being stained with coffee. Color differences (CIEDE 2000 [ΔE00]) were calculated. Data were statistically analyzed using 2-way ANOVA and Tukey honest significant difference test (α=.05). RESULTS: No statistically significant difference were found between surface roughness values of the control and those of the specimens treated using a surface sealant agent (P>.05). The highest color difference was calculated for the polyamide control group. Statistically significant differences were found between the control group and the group treated with the polyamide surface sealant agent (P<.05). CONCLUSIONS: All specimens had a surface roughness value higher than the plaque accumulation threshold (0.20 µm). The color changes observed were clinically unacceptable, except for conventionally polished and one type of surface sealant applied microwave polymerized PMMA denture base material.

Effect of sealant agents on the color stability and surface roughness of nanohybrid composite resins.

STATEMENT OF PROBLEM: The effect of sealant agents on the surface roughness and color stability of nanohybrid composite resins is unknown. PURPOSE: The purpose of this in vitro study was to evaluate the effect of sealant agents on the surface roughness and color stability of 4 nanohybrid composite resin materials. MATERIAL AND METHODS: Forty disks (10×2 mm) were fabricated for each nanohybrid composite resin material (Z-550, Tetric EvoCeram, Clearfill Majesty, Ice) (N=160) and divided into 4 surface treatment groups: 1 conventional polishing (control) and 3 different sealant agent (Palaseal, Optiglaze, BisCover) coupling groups (n=10). The specimens were thermocycled, and surface roughness (Ra) values were obtained with a profilometer. Scanning electron microscope images were also recorded. CIELab color parameters of each specimen were measured with a spectrophotometer before and after 7 days of storage in a coffee solution. Color differences were calculated by the CIEDE 2000 (ΔE00) formula. The data were statistically analyzed by 2-way ANOVA and by the Tukey HSD test (α=.05). RESULTS: The surface treatment technique significantly affected the Ra values of the composite resins tested (P<.001). The interaction between the surface treatment technique and composite resin material was also significant for ΔE00 values (P<.05). Within the composite resin groups, significant decreases in Ra were observed only for the Palaseal agent coupled composite resin groups (except Ice) compared with the control groups (P<.05). Scanning electron microscope images revealed rougher surfaces with conventionally polished groups compared with test groups. Conventionally polished groups had the highest ΔE00 (3.09 to 3.49) values for each composite resin group, except for BisCover applied Clearfill Majesty (P<.05). Within the composite resin groups, significant differences were observed between the color change seen with BisCover and other sealants for Clearfill Majesty composite resin (P<.05). CONCLUSIONS: Using Palaseal agent on all tested composite resins except for Ice produced smoother surfaces. All surface sealant agents provided less discoloration of nanohybrid composite resins after coffee staining compared with conventional polishing except for BisCover applied Clearfill Majesty composite resin.

Effect of denture cleansing solutions on different retentive attachments.

STATEMENT OF PROBLEM: Various Locator abutments and attachments are available commercially for use in overdenture patients. Patients are advised to use cleansing agents to keep their overdentures clean. The effect of different cleansing agents on attachments with different retention is not known. PURPOSE: The purpose of this in vitro study was to evaluate the retention of 3 Locator abutment attachments after they were soaked in 3 different cleansing solutions. MATERIAL AND METHODS: An implant analog with a diameter of 4.1 mm was embedded into acrylic resin, and 1 Locator abutment was placed onto the analog. Seven specimens of clear, pink, and blue Locator attachments (n=7) were soaked in 3 different denture-cleansing solutions (NaOCl, sodium perborate, sodium perborate-sodium bicarbonate) for a time simulating 6 months of clinical use. The control group was soaked in tap water. A testing machine was used to test the attachments' retention. The retention of the attachments after they were soaked in denture cleansers was compared among the groups with repeated-measures analysis of variance followed by the Tukey HSD test (α=.05). RESULTS: The retention of the clear attachments was significantly less after they had been soaked in sodium bicarbonate-containing denture cleanser (P=.001). The retention of the pink Locator attachments was no different after they had been soaked in the different solutions, and the retention of the blue Locator attachments decreased significantly after they had been soaked in the NaOCl and sodium bicarbonate cleansing agents (P=.002). CONCLUSIONS: Attachments of different colors and retention were affected differently by cleansing agents.

Effect of different surface treatment methods on the surface roughness and color stability of interim prosthodontic materials.

STATEMENT OF PROBLEM: The effects of surface sealant agents on the surface roughness and color stability of interim crown materials are unknown. PURPOSE: The purpose of this in vitro study was to evaluate the effects of different polishing methods on the surface roughness and color stability of 4 interim crown materials. MATERIAL AND METHODS: A total of 160 specimens were fabricated from 2 poly(methyl methacrylate) (PMMA; Tab 2000, Dentalon Plus) and 2 bis-acryl (Tempofit, Protemp 4) interim crown materials and divided into 4 groups (n=10) according to applied surface treatment procedures: conventional polishing (control) and 3 surface sealant (Palaseal, Optiglaze, Biscover) coupling methods. Surface roughness (Ra) values were measured with a profilometer. Color parameters were measured with a spectrophotometer before and after staining in coffee. Color differences (CIEDE 2000 [ΔE00]) were calculated. Data were statistically analyzed with 2-way ANOVA and the Tukey honest significant differences test (α=.05). RESULTS: The Ra values of Tempofit with Biscover were significantly lower than their control group, Tab 2000 and Dentalon Plus control groups (P<.05). The highest ΔE00 was calculated for Tempofit control (P<.05). The Dentalon Plus control group had significantly higher ΔE00 values than the other groups, except for the Tempofit and Tab 2000 control groups.The Tab 2000 control ΔE00 was significantly higher than the other groups, except for Dentalon Plus with Palaseal and Dentalon Plus with Optiglaze. CONCLUSIONS: All specimens had a surface roughness higher than the plaque accumulation threshold (0.20 µm). Smoother surfaces were observed for Tempofit with Biscover when compared with theTempofit control. The color change observed with the Dentalon Plus, Tab 2000, and Tempofit control groups was clinically unacceptable. Nonperceivable color changes were seen with Protemp 4 with Optiglaze, Tempofit with Optiglaze, and Tempofit with Biscover. Perceivable but clinically acceptable color changes were observed when sealants were used for all other test groups and Protemp 4 control.

Silver nanoparticle incorporation effect on mechanical and thermal properties of denture base acrylic resins.

OBJECTIVE: The aim of the present study was to evaluate the mechanical and thermal characteristics of two denture base acrylic resins containing silver nanoparticles (AgNPs). MATERIAL AND METHODS: Two different acrylic denture base resins (heat-polymerized and microwave polymerized) containing 0.3, 0.8 and 1.6 wt% AgNPs were evaluated for flexural strength, elastic modulus and impact strength. The glass transition temperature (Tg) and relative heat capacity (Cp) of the samples were determined from the Differential Scanning Calorimetry (DSC) results. For statistical analysis, two-way ANOVA and Tukey-HSD tests were performed. RESULTS: Addition of 0.8% and 1.6% AgNPs in microwave-polymerized resin significantly decreased the transverse strength and elastic modulus. In terms of impact strength, the addition of AgNPs has no effect on both resin groups. Glass transition temperature (Tg) was decreased with the addition of AgNPs for both denture base resins. CONCLUSIONS: The incorporation of AgNPs, generally used for antimicrobial efficiency, affected the transverse strength of the denture base acrylic resins depending on the concentration of nanoparticles. Tg was decreased with the addition of AgNPs for both denture base resins.

11-Hydroxy-2,4-cycloeudesmane from the Leaf Oil of Juglans regia and Evaluation of its Larvicidal Activity.

Leaves of Juglans regia L. collected from two different locations [Adana (A) and Ankara (B)] from Turkey were subjected to hydrodistillation in a Clevenger type apparatus to yield the essential oils (EOs). GC/MS and GC-FID analyses revealed that the A EO was rich in thymol (23.1%), while caryophyllene oxide (33.8%) was found as the main constituent of B EO. Both contained P-eudesmol (1.4% - 9.5 %), (E)-geranyl acetone (3.7% - 5.8%) and the eudesmane type constituent juglaterpene A (3.1% - 11.0%). Using a HP Innowax preparative capillary column connected to a preparative fraction collector, an unknown constituent, juglaterpene A (1, 1 l-hydroxy-2,4-cycloeudesmane), was isolated in a rapid one-step manner with > 94.0% purity. Structure determination was accomplished from ID- and 2D-NMR spectroscopic data. Oil B demonstrated significant larvicidal activity against 1st instar Aedes aegypti L.

Telescopic Overdenture and Implant Supported Fixed Partial Denture: A Pragmatic Treatment Approach.

This case report presents a patient who had been rehabilitated with a telescopic overdenture and implant supported fixed partial denture (ISFPD). The treatment process was as follows: (1) fabricating telescopic crowns and overdenture prosthesis for the lower jaw and a temporary complete denture for the upper jaw, (2) using the temporary denture as diagnostic and surgical guide to optimize dental implant placement, and (3) fabricating ISFPD for the upper jaw. Using the patient's existing or temporary denture not only serves as an alternative surgical guide to calibrate the dental implant locations but also helps to finish the restoration at desired dimension, size, and anatomic form.