Single atoms and metal nanoclusters anchored to graphene vacancies.

Fabricating dispersed single atoms and size-controlled metal nanoclusters remains a difficult challenge due to sintering. Here, we demonstrate that atoms and clusters can be immobilized using atomically clean defect-engineered graphene as the matrix. The graphene is first cleaned of surface contamination with laser heating, after which low-energy Ar irradiation is used to create spatially well-separated vacancies into it. Metal atoms are then evaporated either via thermal or ebeam evaporation onto graphene, where they diffuse until being trapped into a vacancy. The density of embedded structures can be controlled through irradiation dose, and the size of the structures through evaporation time. The resulting structures are confirmed through atomic-resolution scanning transmission electron microscopy and electron energy loss spectroscopy. We demonstrate here incorporation of Al, Ti, Fe, Ag and Au single atoms or nanoclusters, but the method should work equally well for other elements.

Two-dimensional few-atom noble gas clusters in a graphene sandwich.

The van der Waals atomic solids of noble gases on metals at cryogenic temperatures were the first experimental examples of two-dimensional systems. Recently, such structures have also been created on surfaces under encapsulation by graphene, allowing studies at elevated temperatures through scanning tunnelling microscopy. However, for this technique, the encapsulation layer often obscures the arrangement of the noble gas atoms. Here we create Kr and Xe clusters in between two suspended graphene layers, and uncover their atomic structure through transmission electron microscopy. We show that small crystals (N < 9) arrange on the basis of the simple non-directional van der Waals interaction. Larger crystals show some deviations, possibly enabled by deformations in the encapsulating graphene lattice. We further discuss the dynamics of the clusters within the graphene sandwich, and show that although all the Xe clusters with up to N ≈ 100 remain solid, Kr clusters with already N ≈ 16 turn occasionally fluid under our experimental conditions (under a pressure of ~0.3 GPa). This study opens a way for the so-far unexplored frontier of encapsulated two-dimensional van der Waals solids with exciting possibilities for fundamental condensed-matter physics research and possible applications in quantum information technology.

Creation of Single Vacancies in hBN with Electron Irradiation.

Understanding electron irradiation effects is vital not only for reliable transmission electron microscopy characterization, but increasingly also for the controlled manipulation of 2D materials. The displacement cross sections of monolayer hexagonal boron nitride (hBN) are measured using aberration-corrected scanning transmission electron microscopy in near ultra-high vacuum at primary beam energies between 50 and 90 keV. Damage rates below 80 keV are up to three orders of magnitude lower than previously measured at edges under poorer residual vacuum conditions, where chemical etching appears to dominate. Notably, it is possible to create single vacancies in hBN using electron irradiation, with boron almost twice as likely as nitrogen to be ejected below 80 keV. Moreover, any damage at such low energies cannot be explained by elastic knock-on, even when accounting for the vibrations of the atoms. A theoretical description is developed to account for the lowering of the displacement threshold due to valence ionization resulting from inelastic scattering of probe electrons, modeled using charge-constrained density functional theory molecular dynamics. Although significant reductions are found depending on the constrained charge, quantitative predictions for realistic ionization states are currently not possible. Nonetheless, there is potential for defect-engineering of hBN at the level of single vacancies using electron irradiation.

Linear indium atom chains at graphene edges.

The presence of metal atoms at the edges of graphene nanoribbons (GNRs) opens new possibilities toward tailoring their physical properties. We present here formation and high-resolution characterization of indium (In) chains on the edges of graphene-supported GNRs. The GNRs are formed when adsorbed hydrocarbon contamination crystallizes via laser heating into small ribbon-like patches of a second graphitic layer on a continuous graphene monolayer and onto which In is subsequently physical vapor deposited. Using aberration-corrected scanning transmission electron microscopy (STEM), we find that this leads to the preferential decoration of the edges of the overlying GNRs with multiple In atoms along their graphitic edges. Electron-beam irradiation during STEM induces migration of In atoms along the edges of the GNRs and triggers the formation of longer In atom chains during imaging. Density functional theory (DFT) calculations of GNRs similar to our experimentally observed structures indicate that both bare zigzag (ZZ) GNRs as well as In-terminated ZZ-GNRs have metallic character, whereas in contrast, In termination induces metallicity for otherwise semiconducting armchair (AC) GNRs. Our findings provide insights into the creation and properties of long linear metal atom chains at graphitic edges.

Corrugations in Free-Standing Graphene.

Although both the tendency of 2D materials to bend out of plane as well as its effect on materials' properties are well known, the factors influencing this phenomenon have not been extensively studied. Graphene, the one-atom-thick membrane of carbon atoms, is both arguably the best known 2D material, as well as the most prone to spontaneous corrugations. Here, we use electron diffraction to systematically study the factors influencing corrugations in graphene, including the size of the free-standing area, the preparation method, the amount of surface contamination, and electron-beam-induced structural disorder. We find that mechanically exfoliated graphene is less corrugated than graphene grown via chemical vapor deposition (corrugation amplitude of (0.83±0.10) Å compared to (1.33±0.20) Å for a free-standing area with a diameter of 1.7µm). Similarly, corrugation amplitude grows by more than a factor of two when the diameter of the free- standing area is increased from 1.7µm to ca. 3.0µm. Electron beam irradiation affects the corrugation in two ways, firstly by removing the hydrocarbon contamination, which decreases corrugation, and secondly by creating increasing amounts of disorder into the material, which again increases corrugation. Overall, our results show that control over the sample during both initial preparation and post-preparation treatment allows for a change in the amount of corrugation in free-standing 2D materials, which may lead to new advances in their use in applications.

Ion-Induced Surface Charge Dynamics in Freestanding Monolayers of Graphene and MoS_{2} Probed by the Emission of Electrons.

We compare the ion-induced electron emission from freestanding monolayers of graphene and MoS_{2} to find a sixfold higher number of emitted electrons for graphene even though both materials have similar work functions. An effective single-band Hubbard model explains this finding by a charge-up in MoS_{2} that prevents low energy electrons from escaping the surface within a period of a few femtoseconds after ion impact. We support these results by measuring the electron energy distribution for correlated pairs of electrons and transmitted ions. The majority of emitted primary electrons have an energy below 10 eV and are therefore subject to the dynamic charge-up effects at surfaces.

Beam-driven Dynamics of Aluminium Dopants in Graphene.

Substituting heteroatoms into graphene can tune its properties for applications ranging from catalysis to spintronics. The further recent discovery that covalent impurities in graphene can be manipulated at atomic precision using a focused electron beam may open avenues towards sub-nanometer device architectures. However, the preparation of clean samples with a high density of dopants is still very challenging. Here, we report vacancy-mediated substitution of aluminium into laser-cleaned graphene, and without removal from our ultra-high vacuum apparatus, study their dynamics under 60 keV electron irradiation using aberration-corrected scanning transmission electron microscopy and spectroscopy. Three- and four-coordinated Al sites are identified, showing excellent agreement with ab initio predictions including binding energies and electron energy-loss spectrum simulations. We show that the direct exchange of carbon and aluminium atoms predicted earlier occurs under electron irradiation, although unexpectedly it is less probable than the same process for silicon. We also observe a previously unknown nitrogen-aluminium exchange that occurs at Al─N double-dopant sites at graphene divacancies created by our plasma treatment.

Toward Exotic Layered Materials: 2D Cuprous Iodide.

Heterostructures composed of 2D materials are already opening many new possibilities in such fields of technology as electronics and magnonics, but far more could be achieved if the number and diversity of 2D materials were increased. So far, only a few dozen 2D crystals have been extracted from materials that exhibit a layered phase in ambient conditions, omitting entirely the large number of layered materials that may exist at other temperatures and pressures. This work demonstrates how such structures can be stabilized in 2D van der Waals (vdw) stacks under room temperature via growing them directly in graphene encapsulation by using graphene oxide as the template material. Specifically, an ambient stable 2D structure of copper and iodine, a material that normally only occurs in layered form at elevated temperatures between 645 and 675 K, is produced. The results establish a simple route to the production of more exotic phases of materials that would otherwise be difficult or impossible to stabilize for experiments in ambient.

Carbon Nano-onions: Potassium Intercalation and Reductive Covalent Functionalization.

Herein we report the synthesis of covalently functionalized carbon nano-onions (CNOs) via a reductive approach using unprecedented alkali-metal CNO intercalation compounds. For the first time, an in situ Raman study of the controlled intercalation process with potassium has been carried out revealing a Fano resonance in highly doped CNOs. The intercalation was further confirmed by electron energy loss spectroscopy and X-ray diffraction. Moreover, the experimental results have been rationalized with DFT calculations. Covalently functionalized CNO derivatives were synthesized by using phenyl iodide and n-hexyl iodide as electrophiles in model nucleophilic substitution reactions. The functionalized CNOs were exhaustively characterized by statistical Raman spectroscopy, thermogravimetric analysis coupled with gas chromatography and mass spectrometry, dynamic light scattering, UV-vis, and ATR-FTIR spectroscopies. This work provides important insights into the understanding of the basic principles of reductive CNOs functionalization and will pave the way for the use of CNOs in a wide range of potential applications, such as energy storage, photovoltaics, or molecular electronics.

Single Indium Atoms and Few-Atom Indium Clusters Anchored onto Graphene via Silicon Heteroatoms.

Single atoms and few-atom nanoclusters are of high interest in catalysis and plasmonics, but pathways for their fabrication and placement remain scarce. We report here the self-assembly of room-temperature-stable single indium (In) atoms and few-atom In clusters (2-6 atoms) that are anchored to substitutional silicon (Si) impurity atoms in suspended monolayer graphene membranes. Using atomically resolved scanning transmission electron microscopy (STEM), we find that the symmetry of the In structures is critically determined by the three- or fourfold coordination of the Si "anchors". All structures are produced without electron-beam induced materials modification. In turn, when activated by electron beam irradiation in the STEM, we observe in situ the formation, restructuring, and translation of the Si-anchored In structures. Our results on In-Si-graphene provide a materials system for controlled self-assembly and heteroatomic anchoring of single atoms and few-atom nanoclusters on graphene.

Atomic-Level Structural Engineering of Graphene on a Mesoscopic Scale.

Structural engineering is the first step toward changing properties of materials. While this can be at relative ease done for bulk materials, for example, using ion irradiation, similar engineering of 2D materials and other low-dimensional structures remains a challenge. The difficulties range from the preparation of clean and uniform samples to the sensitivity of these structures to the overwhelming task of sample-wide characterization of the subjected modifications at the atomic scale. Here, we overcome these issues using a near ultrahigh vacuum system comprised of an aberration-corrected scanning transmission electron microscope and setups for sample cleaning and manipulation, which are combined with automated atomic-resolution imaging of large sample areas and a convolutional neural network approach for image analysis. This allows us to create and fully characterize atomically clean free-standing graphene with a controlled defect distribution, thus providing the important first step toward atomically tailored two-dimensional materials.

Cluster Superlattice Membranes.

Cluster superlattice membranes consist of a two-dimensional hexagonal lattice of similar-sized nanoclusters sandwiched between single-crystal graphene and an amorphous carbon matrix. The fabrication process involves three main steps, the templated self-organization of a metal cluster superlattice on epitaxial graphene on Ir(111), conformal embedding in an amorphous carbon matrix, and subsequent lift-off from the Ir(111) substrate. The mechanical stability provided by the carbon-graphene matrix makes the membrane stable as a free-standing material and enables transfer to other substrates. The fabrication procedure can be applied to a wide variety of cluster materials and cluster sizes from the single-atom limit to clusters of a few hundred atoms, as well as other two-dimensional layer/host matrix combinations. The versatility of the membrane composition, its mechanical stability, and the simplicity of the transfer procedure make cluster superlattice membranes a promising material in catalysis, magnetism, energy conversion, and optoelectronics.

Atomic-Scale Carving of Nanopores into a van der Waals Heterostructure with Slow Highly Charged Ions.

The growing family of 2D materials led not long ago to combining different 2D layers and building artificial systems in the form of van der Waals heterostructures. Tailoring of heterostructure properties postgrowth would greatly benefit from a modification technique with a monolayer precision. However, appropriate techniques for material modification with this precision are still missing. To achieve such control, slow highly charged ions appear ideal as they carry high amounts of potential energy, which is released rapidly upon ion neutralization at the position of the ion. The resulting potential energy deposition is thus limited to just a few atomic layers (in contrast to the kinetic energy deposition). Here, we irradiated a freestanding van der Waals MoS2/graphene heterostructure with 1.3 keV/amu xenon ions in high charge states of 38, which led to nanometer-sized pores that appear only in the MoS2 facing the ion beam, but not in graphene beneath the hole. Reversing the stacking order leaves both layers undamaged, which we attribute to the high conductivity and carrier mobility in graphene acting as a shield for the MoS2 underneath. Our main focus is here on monolayer MoS2, but we also analyzed areas with few-layer structures and observed that the perforation is limited to the two topmost MoS2 layers, whereas deeper layers remain intact. Our results demonstrate that in addition to already being a valuable tool for materials processing, the usability of ion irradiation can be extended to mono- (or bi)layer manipulation of van der Waals heterostructures when the localized potential energy deposition of highly charged ions is also added to the toolbox.

Scalable growth of single-walled carbon nanotubes with a highly uniform structure.

Here, a scalable floating catalyst chemical vapor deposition (FCCVD) method is developed for the production of single-walled carbon nanotubes (SWCNTs) with a controlled structure. For the first time, water is used as the growth promoter in the FCCVD process to modulate the growth of SWCNTs. At an optimum water concentration of ca. 115 ppm, the water-assisted FCCVD process synthesizes SWCNTs with a significantly narrow chirality distribution. In particular, the proportion of (9,8) and (8,7) semiconducting tubes was dramatically enhanced to 45% with 27% of the (9,8) tube in the end product. This is attributed to the changes in both the SWCNT diameter and the chiral angle. The experiment results and accurate quantum chemical molecular dynamics simulations show that the addition of water affects the nucleation and the size distribution of nanoparticle catalysts, thus resulting in the growth of SWCNTs with a highly uniform structure. This direct and continuous water-assisted FCCVD provides the possibility for the mass production of high-quality SWCNTs with a controlled structure.

Transformation and Evaporation of Surface Adsorbents on a Graphene "Hot Plate".

Dynamic surface modification of suspended graphene at high temperatures was directly observed with in situ scanning transmission electron microscopy (STEM) measurements. The suspended graphene devices were prepared on a SiN membrane substrate with a hole so that STEM observations could be conducted during Joule heating. Current-voltage characteristics of suspended graphene devices inside the STEM chamber were measured while monitoring and controlling the temperature of graphene by estimating the electrical power of the devices. During the in situ STEM observation at high temperatures, residual hydrocarbon adsorbents that had remained on graphene effectively evaporated creating large, atomically clean graphene areas. At other places, dynamic changes in the shape, position, and orientation of adsorbents could be directly observed. The temperature of the suspended graphene sample was estimated to reach up to 2000 K during the experiment, making graphene an efficient high-temperature micrometer-sized electron-transparent hot plate for future experiments in microscopes.

Kiruna-Type Ore as a Novel Precursor for Large-Scale Production of Small Uniform Iron Oxide Nanoparticles.

The wide range of actual and potential applications of nanoparticles, highlight the necessity of a reliable production method for both quality and quantity of the products. Mechanical attrition is one of the first well-known techniques used to produce nanoparticles. However, these approaches have been restricted to produce uniform particles below the critical size of 15 nm because of the attrition balance limit. This paper introduces the magnetite-silicate raw material of a Kiruna-type ore deposit as a novel precursor, which enables the production of small iron oxide nanoparticles below the critical size by mechanical attrition. X-ray fluorescence (XRF), powder X-ray diffractometry (pXRD), dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used for characterization of the precursor and obtained nanoparticles. The results indicate that the particles with a mean diameter of 10.7(2.7) nm consist of mainly less than one crystallite. The significant size reduction below the attrition balance limit can be attributed to the quartz content of the raw material, which operated as supporting micro-balls for transferring the energy during the milling process.

Direct imaging of light-element impurities in graphene reveals triple-coordinated oxygen.

Along with hydrogen, carbon, nitrogen and oxygen are the arguably most important elements for organic chemistry. Due to their rich variety of possible bonding configurations, they can form a staggering number of compounds. Here, we present a detailed analysis of nitrogen and oxygen bonding configurations in a defective carbon (graphene) lattice. Using aberration-corrected scanning transmission electron microscopy and single-atom electron energy loss spectroscopy, we directly imaged oxygen atoms in graphene oxide, as well as nitrogen atoms implanted into graphene. The collected data allows us to compare nitrogen and oxygen bonding configurations, showing clear differences between the two elements. As expected, nitrogen forms either two or three bonds with neighboring carbon atoms, with three bonds being the preferred configuration. Oxygen, by contrast, tends to bind with only two carbon atoms. Remarkably, however, triple-coordinated oxygen with three carbon neighbors is also observed, a configuration that is exceedingly rare in organic compounds.

Enhanced Tunneling in a Hybrid of Single-Walled Carbon Nanotubes and Graphene.

Transparent and conductive films (TCFs) are of great technological importance. Their high transmittance, electrical conductivity, and mechanical strength make single-walled carbon nanotubes (SWCNTs) a good candidate for the raw material for TCFs. Despite the ballistic transport in individual SWCNTs, electrical conductivity of SWCNT networks is limited by low efficiency of charge tunneling between the tube elements. Here, we demonstrate that the nanotube network sheet resistance at high optical transmittance is decreased by more than 50% when fabricated on graphene. This is a comparable improvement as that obtained through gold chloride (AuCl3) doping. However, while Raman spectroscopy reveals substantial changes in spectral features of AuCl3 doped nanotubes, this does not occur with graphene. Instead, temperature-dependent transport measurements indicate that a graphene substrate reduces the tunneling barrier heights, while its parallel conductivity contribution is almost negligible. Finally, we show that combining the graphene substrate and AuCl3 doping, brings the SWCNT thin film sheet resistance down to 36 Ω/□.

Influence of temperature on the displacement threshold energy in graphene.

The atomic structure of nanomaterials is often studied using transmission electron microscopy. In addition to image formation, the energetic electrons impinging on the sample may also cause damage. In a good conductor such as graphene, the damage is limited to the knock-on process caused by elastic electron-nucleus scattering. This process is determined by the kinetic energy an atom needs to be sputtered, i.e. its displacement threshold energy Ed. This is typically assumed to have a fixed value for all electron impacts on equivalent atoms within a crystal. Here we show using density functional tight-binding simulations that the displacement threshold energy is affected by thermal perturbations of atoms from their equilibrium positions. This effect can be accounted for in the estimation of the displacement cross section by replacing the constant threshold energy value with a distribution. Our refined model better describes previous precision measurements of graphene knock-on damage, and should be considered also for other low-dimensional materials.

Silicon Substitution in Nanotubes and Graphene via Intermittent Vacancies.

The chemical and electrical properties of single-walled carbon nanotubes (SWCNTs) and graphene can be modified by the presence of covalently bound impurities. Although this can be achieved by introducing chemical additives during synthesis, it often hinders growth and leads to limited crystallite size and quality. Here, through the simultaneous formation of vacancies with low-energy argon plasma and the thermal activation of adatom diffusion by laser irradiation, silicon impurities are incorporated into the lattice of both materials. After an exposure of ∼1 ion/nm2, we find Si-substitution densities of 0.15 nm-2 in graphene and 0.05 nm-2 in nanotubes, as revealed by atomically resolved scanning transmission electron microscopy. In good agreement with predictions of Ar irradiation effects in SWCNTs, we find Si incorporated in both mono- and divacancies, with ∼2/3 being of the first type. Controlled inclusion of impurities in the quasi-1D and -2D carbon lattices may prove useful for applications such as gas sensing, and a similar approach might also be used to substitute other elements with migration barriers lower than that of carbon.