Optimizing Antimicrobial Peptide Design: Integration of Cell-Penetrating Peptides, Amyloidogenic Fragments, and Amino Acid Residue Modifications.

The escalating threat of multidrug-resistant pathogens necessitates innovative approaches to combat infectious diseases. In this study, we examined peptides R23FS*, V31KS*, and R44KS*, which were engineered to include an amyloidogenic fragment sourced from the S1 protein of S. aureus, along with one or two cell-penetrating peptide (CPP) components. We assessed the antimicrobial efficacy of these peptides in a liquid medium against various strains of both Gram-positive bacteria, including S. aureus (209P and 129B strains), MRSA (SA 180 and ATCC 43300 strains), and B. cereus (strain IP 5832), and Gram-negative bacteria such as P. aeruginosa (ATCC 28753 and 2943 strains) and E. coli (MG1655 and K12 strains). Peptides R23FS*, V31KS*, and R44KS* exhibited antimicrobial activity comparable to gentamicin and meropenem against all tested bacteria at concentrations ranging from 24 to 48 µM. The peptides showed a stronger antimicrobial effect against B. cereus. Notably, peptide R44KS* displayed high efficacy compared to peptides R23FS* and V31KS*, particularly evident at lower concentrations, resulting in significant inhibition of bacterial growth. Furthermore, modified peptides V31KS* and R44KS* demonstrated enhanced inhibitory effects on bacterial growth across different strains compared to their unmodified counterparts V31KS and R44KS. These results highlight the potential of integrating cell-penetrating peptides, amyloidogenic fragments, and amino acid residue modifications to advance the innovation in the field of antimicrobial peptides, thereby increasing their effectiveness against a broad spectrum of pathogens.

Enhancing the Antimicrobial Properties of Peptides through Cell-Penetrating Peptide Conjugation: A Comprehensive Assessment.

Combining antimicrobial peptides (AMPs) with cell-penetrating peptides (CPPs) has shown promise in boosting antimicrobial potency, especially against Gram-negative bacteria. We examined the CPP-AMP interaction with distinct bacterial types based on cell wall differences. Our investigation focused on AMPs incorporating penetratin CPP and dihybrid peptides containing both cell-penetrating TAT protein fragments from the human immunodeficiency virus and Antennapedia peptide (Antp). Assessment of the peptides TAT-AMP, AMP-Antp, and TAT-AMP-Antp revealed their potential against Gram-positive strains (Staphylococcus aureus, Methicillin-resistant Staphylococcus aureus (MRSA), and Bacillus cereus). Peptides TAT-AMP and AMP-Antp using an amyloidogenic AMP from S1 ribosomal protein Thermus thermophilus, at concentrations ranging from 3 to 12 µM, exhibited enhanced antimicrobial activity against B. cereus. TAT-AMP and TAT-AMP-Antp, using an amyloidogenic AMP from the S1 ribosomal protein Pseudomonas aeruginosa, at a concentration of 12 µM, demonstrated potent antimicrobial activity against S. aureus and MRSA. Notably, the TAT-AMP, at a concentration of 12 µM, effectively inhibited Escherichia coli (E. coli) growth and displayed antimicrobial effects similar to gentamicin after 15 h of incubation. Peptide characteristics determined antimicrobial activity against diverse strains. The study highlights the intricate relationship between peptide properties and antimicrobial potential. Mechanisms of AMP action are closely tied to bacterial cell wall attributes. Peptides with the TAT fragment exhibited enhanced antimicrobial activity against S. aureus, MRSA, and P. aeruginosa. Peptides containing only the Antp fragment displayed lower activity. None of the investigated peptides demonstrated cytotoxic or cytostatic effects on either BT-474 cells or human skin fibroblasts. In conclusion, CPP-AMPs offer promise against various bacterial strains, offering insights for targeted antimicrobial development.

Exploring the antibacterial action of gliotoxin: Does it induce oxidative stress or protein damage?

The study aimed to investigate the effects of gliotoxin (GTX), a secondary fungal metabolite belonging to the epipolythiodioxopiperazines class, on Gram-positive and Gram-negative bacteria. While the cytotoxic mechanism of GTX on eukaryotes is well understood, its interaction with bacteria is not yet fully comprehended. The study discovered that S. epidermidis displayed a higher uptake rate of GTX than E.coli. However, Gram-negative bacteria required higher doses of GTX than Gram-positive bacteria to experience the bactericidal effect, which occurred within 4 h for both types of bacteria. The treatment of bioluminescent sensor E.coli MG1655 pKatG-lux with GTX resulted in oxidative stress. Pre-incubation with the antioxidant Trolox did not increase the GTX inhibitory dose, however, slightly increased the bacterial growth rate comparing to GTX alone. At the same time, we found that GTX inhibitory dose was significantly increased by the pretreatment of bacteria with 2-mercaptoethanol and reduced glutathione. Using another biosensor, E. coli MG1655 pIpbA-lux, we showed that bacteria treated with GTX exhibited heat shock stress. SDS-page electrophoresis demonstrated protein aggregation under the GTX treatment. In addition, we have found that gliotoxin's action on bacteria was significantly inhibited when zinc salt was added to the growth medium.

The Strategies of Development of New Non-Toxic Inhibitors of Amyloid Formation.

In recent years, due to the aging of the population and the development of diagnostic medicine, the number of identified diseases associated with the accumulation of amyloid proteins has increased. Some of these proteins are known to cause a number of degenerative diseases in humans, such as amyloid-beta (Aß) in Alzheimer's disease (AD), α-synuclein in Parkinson's disease (PD), and insulin and its analogues in insulin-derived amyloidosis. In this regard, it is important to develop strategies for the search and development of effective inhibitors of amyloid formation. Many studies have been carried out aimed at elucidating the mechanisms of amyloid aggregation of proteins and peptides. This review focuses on three amyloidogenic peptides and proteins-Aß, α-synuclein, and insulin-for which we will consider amyloid fibril formation mechanisms and analyze existing and prospective strategies for the development of effective and non-toxic inhibitors of amyloid formation. The development of non-toxic inhibitors of amyloid will allow them to be used more effectively for the treatment of diseases associated with amyloid.

Amyloidogenic Peptides: New Class of Antimicrobial Peptides with the Novel Mechanism of Activity.

Antibiotic-resistant bacteria are recognized as one of the leading causes of death in the world. We proposed and successfully tested peptides with a new mechanism of antimicrobial action "protein silencing" based on directed co-aggregation. The amyloidogenic antimicrobial peptide (AAMP) interacts with the target protein of model or pathogenic bacteria and forms aggregates, thereby knocking out the protein from its working condition. In this review, we consider antimicrobial effects of the designed peptides on two model organisms, E. coli and T. thermophilus, and two pathogenic organisms, P. aeruginosa and S. aureus. We compare the amino acid composition of proteomes and especially S1 ribosomal proteins. Since this protein is inherent only in bacterial cells, it is a good target for studying the process of co-aggregation. This review presents a bioinformatics analysis of these proteins. We sum up all the peptides predicted as amyloidogenic by several programs and synthesized by us. For the four organisms we studied, we show how amyloidogenicity correlates with antibacterial properties. Let us especially dwell on peptides that have demonstrated themselves as AMPs for two pathogenic organisms that cause dangerous hospital infections, and in which the minimal inhibitory concentration (MIC) turned out to be comparable to the MIC of gentamicin sulfate. All this makes our study encouraging for the further development of AAMP. The hybrid peptides may thus provide a starting point for the antibacterial application of amyloidogenic peptides.

Multiple Antimicrobial Effects of Hybrid Peptides Synthesized Based on the Sequence of Ribosomal S1 Protein from Staphylococcus aureus.

The need to develop new antimicrobial peptides is due to the high resistance of pathogenic bacteria to traditional antibiotics now and in the future. The creation of synthetic peptide constructs is a common and successful approach to the development of new antimicrobial peptides. In this work, we use a simple, flexible, and scalable technique to create hybrid antimicrobial peptides containing amyloidogenic regions of the ribosomal S1 protein from Staphylococcus aureus. While the cell-penetrating peptide allows the peptide to enter the bacterial cell, the amyloidogenic site provides an antimicrobial effect by coaggregating with functional bacterial proteins. We have demonstrated the antimicrobial effects of the R23F, R23DI, and R23EI hybrid peptides against Staphylococcus aureus, methicillin-resistant S. aureus (MRSA), Pseudomonas aeruginosa, Escherichia coli, and Bacillus cereus. R23F, R23DI, and R23EI can be used as antimicrobial peptides against Gram-positive and Gram-negative bacteria resistant to traditional antibiotics.

Is It Possible to Create Antimicrobial Peptides Based on the Amyloidogenic Sequence of Ribosomal S1 Protein of P. aeruginosa?

The development and testing of new antimicrobial peptides (AMPs) represent an important milestone toward the development of new antimicrobial drugs that can inhibit the growth of pathogens and multidrug-resistant microorganisms such as Pseudomonas aeruginosa, Gram-negative bacteria. Most AMPs achieve these goals through mechanisms that disrupt the normal permeability of the cell membrane, which ultimately leads to the death of the pathogenic cell. Here, we developed a unique combination of a membrane penetrating peptide and peptides prone to amyloidogenesis to create hybrid peptide: "cell penetrating peptide + linker + amyloidogenic peptide". We evaluated the antimicrobial effects of two peptides that were developed from sequences with different propensities for amyloid formation. Among the two hybrid peptides, one was found with antibacterial activity comparable to antibiotic gentamicin sulfate. Our peptides showed no toxicity to eukaryotic cells. In addition, we evaluated the effect on the antimicrobial properties of amino acid substitutions in the non-amyloidogenic region of peptides. We compared the results with data on the predicted secondary structure, hydrophobicity, and antimicrobial properties of the original and modified peptides. In conclusion, our study demonstrates the promise of hybrid peptides based on amyloidogenic regions of the ribosomal S1 protein for the development of new antimicrobial drugs against P. aeruginosa.

Optimization method for designing double-surface refractive optical elements for an extended light source.

We propose a method for designing optical elements with two freeform refracting surfaces generating prescribed non-axisymmetric irradiance distributions in the case of an extended light source. The method is based on the representation of the optical surfaces as bicubic splines and on the subsequent optimization of their parameters using a quasi-Newton method. For the fast calculation of the merit function, we propose an efficient version of the ray tracing method. Using the proposed approach, we design optical elements generating uniform square-shaped irradiance distributions in the far- and near-field. The designed elements are very compact (the height-to-source ratio is only 1.6) and, while providing a high lighting efficiency of 89%, generate highly uniform distributions (the ratio between minimum and average irradiance values in the prescribed square-shaped region exceeds 0.9).

Designing freeform TIR optical elements using supporting quadric method.

The supporting quadric method (SQM) is a versatile method for the design of a wide class of freeform optical elements. In the present work, a novel SQM-based approach for the computation of total internal reflection (TIR) optical elements generating arbitrary narrow-angle light distributions is proposed. High performance of the presented method is confirmed by two designed optical elements: the first one forms an illuminance distribution in a square region with angular size of 17°, and the second one generates a bat-shaped uniformly illuminated area with an angular size of 43.6° x 22.6°. The lighting efficiencies in both cases exceed 90%, and the relative root-mean-square deviations of the generated light distributions from the required ones are less than 6%.

Development of multiple-surface optical elements for road lighting.

The development of LED secondary optics for road illumination is quite a challenging problem. Optical elements developed for this kind of application should have maximal efficiency, provide high luminance and illuminance uniformity, and meet many other specific requirements. Here, we demonstrate that the usage of the supporting quadric method modification enables generating free-form optical solution satisfying all these requirements perfectly. As an example, two optical elements for different roadway types are computed, manufactured by injection molding, and then measured in a photometry bench. Experimental data demonstrate that the obtained light distributions meet ME1 class requirements of EN 13201 standard. The obtained directivity patterns are universal and provide high performance with different configurations of luminaires' arrangement: the ratio of pole altitude to distance can vary from 2.5 up to 3.6.

Design of LED refractive optics with predetermined balance of ray deflection angles between inner and outer surfaces.

To improve the optical performance of LED-based lighting devices, refractive optical elements are usually used. We propose a novel technique for the computation of free-form optical elements with two refractive surfaces generating the required illuminance or intensity distribution. The proposed approach makes it possible to control the balance of deflection angles between the inner and outer surfaces of the optical element. It has been proved that for the point light source, the maximal efficiency is obtained when each refractive surface performs exactly the half of the required ray deflection. As an example, a set of optical elements producing a uniformly illuminated square region is computed. Simulation of the computed designs with extended sources has shown that the most tolerant solutions to the size of the light source are obtained in the case when the inner surface performs 60-80% of the ray deflection, and the outer surface performs the remaining 20-40%. The influence of deflection balance on the size of the optical element is discussed.

Design of efficient LED optics with two free-form surfaces.

Most LED illumination applications require generation of complex light patterns for which the secondary optics with two free-form surfaces needs to be used. We present a novel optimization method for computing such type of optical elements. An analytical solution for the generation of the initial surfaces is proposed. To accelerate the optimization process, a specific surface representation is used, that eliminates the need to run a time-expensive raytracing procedure. As an example, an optical element generating uniformly illuminated rectangular area with size of 60° by 40° is computed. Lighting efficacy for the extended Lambertian source 1x1 mm is 88.5% and nonuniformity is less than 8.5%.