A blue arsenomolybdic acid-crystal violet ion-associate pair paving the way for the field detection of arsenic in groundwater.

A simple visual colorimetric method based on arsenomolybdic acid-crystal violet ion-associate pair formation is described for the detection of As in groundwater at about 10, 25 and 50 µg L-1 levels. The pair exhibits light green coloration at ≤5 µg L-1 and blue colorations of distinctly different intensities at about 10, 25 and 50 µg L-1 concentrations of arsenic. High sensitivity is achieved by the preconcentration of As that entails simultaneous sorption of both As(III) and As(V) from groundwater on covellite (CuS) and, later, their elution as As(V), which subsequently participates in the formation of arsenomolybdic acid. The interference in the color development from PO43-ions that are as efficiently sorbed on CuS and eluted as the oxyanions of As is eliminated by their selective removal by Ce4+ ions under basic (pH ∼ 8.5) conditions. The removal is caused by the formation of cerium phosphate and its co-precipitation with calcium hydroxide. SiO42- ions do not interfere in the process as they are not sorbed by CuS. Groundwater containing ≤0.5 mg L-1 P and ≥200 mg L-1 total dissolved solid can be conveniently analysed by the method. The direct sensing of As(III) as well as As(V), the use of benign and easily available chemicals, the absence of any hazardous by-product, undiminished applicability in sunlight, the testing procedure lasting only for about 30 min, and rapidity are the major advantages of the method. Thus, the method is potentially well-suited for the on-site testing of groundwater potability under different regulations.

On-line speciation of inorganic and methyl mercury in waters and fish tissues using polyaniline micro-column and flow injection-chemical vapour generation-inductively coupled plasma mass spectrometry (FI-CVG-ICPMS).

A simple and efficient method for the determination of ultra-trace amounts of inorganic mercury (iHg) and methylmercury (MeHg) in waters and fish tissues was developed using a micro-column filled with polyaniline (PANI) coupled online to flow injection-chemical vapour generation-inductively coupled plasma mass spectrometry (FI-CVG-ICPMS) system. Preliminary studies indicated that inorganic and methyl mercury species could be separated on PANI column in two different speciation approaches. At pH <3, only iHg could be sorbed and almost no adsorption of MeHg was found (speciation procedure 1). If the sample solution pH is approximately 7, both MeHg and iHg species could be sorbed on the PANI column. Subsequently both the Hg species were selectively eluted with 2% HCl and a mixture of 2% HCl and 0.02% thiourea respectively (speciation procedure 2). The adsorption percentage of iHg on the PANI column was unchanged even with acidity of the sample solution increased to 6 mol L(-1). Therefore, an acidic solution (5 mol L(-1) HCl), used for ultra-sound assisted extraction of the mercury species from biological samples, was used directly to separate MeHg from iHg in the fish tissues (tuna fish ERM-CE 463, ERM-CE 464 and IAEA-350) by PANI column using speciation procedure 1. The determined values were in good agreement with certified values. Under optimal conditions, the limits of detection (LODs) were 2.52 pg and 3.24 pg for iHg and MeHg (as Hg) respectively. The developed method was applied successfully to the direct determination of iHg and MeHg in various waters (tap water, lake water, ground water and sea-water) and the recoveries for the spiked samples were in the range of 96-102% for both the Hg species.

Analysis of caffeic acid derivatives in echinacea extracts by liquid chromatography particle beam mass spectrometry (LC-PB/MS) employing electron impact and glow discharge ionization sources.

A liquid chromatography-particle beam/mass spectrometry (LC-PB/MS) method with electron impact (EI) and glow discharge (GD) ionization sources is presented for the determination of caffeic acid derivatives in echinacea tinctures. In this work, two commercially available echinacea ethanolic extracts were used as the test samples for the separation, identification, and quantification of the caffeic acid derivatives (caffeic acid, chlorogenic acid, cichoric acid, and caftaric acid), which are suggested to have beneficial medicinal properties. Detailed evaluations of the two primary controlling parameters for EI (electron energy and source block temperature) and GD (discharge current and pressure) sources were performed to determine optimal instrument operation conditions. The mass spectra obtained from both ion sources provide clear and simple molecular fragmentation patterns for each of the target analytes. The absolute detection limits for the caffeic acid derivatives were determined to be at subnanogram levels for both the EI and GD sources. The separation of the caffeic acid derivatives in echinacea was accomplished by reversed-phase chromatography using a C(18) column and a gradient elution system of water containing 0.1% trifluoroacetic acid and methanol, with an analysis time of less than 40 min. A standard addition method was employed for the quantification of each of the caffeic acid derivatives in the tincture.

Liquid chromatography-particle beam electron ionization mass spectrometry method for analysis of botanical extracts: evaluation of ephedrine alkaloids in standard reference materials.

The preliminary validation of a high-performance liquid chromatography particle beam mass spectrometry method (HPLC-PB/MS) with electron impact ionization source for analysis of botanical extracts is presented. The LC-PB/MS system was evaluated for the analysis of ephedrine alkaloids using ephedra-containing National Institute of Standards and Technology dietary supplement standard reference materials (SRMs) 3241 Ephedra Sinica Stapf Native Extract and 3242 Ephedra Sinica Stapf Commercial Extract. The ephedrine alkaloids were separated by reversed-phase chromatography using a phenyl column at room temperature. A linear gradient method with a mobile phase composition varying from 5:95 [MeOH:0.1% trifluoroacetic acid (TFA) in water] to 20:80 (MeOH:0.1% TFA in water) at a flow rate of 1.0 ml/min, with an analysis time of less than 20 min, was used. The source block temperature was evaluated to determine the optimal operating conditions by monitoring the intensities and fragmentation patterns of the ephedrine alkaloids. Ephedrine and N-methylephedrine were taken as a representative of the test alkaloids. The LODs on the sub-nanogram level were achieved, with ephedrine, pseudoephedrine, and methylephedrine in the SRMs quantified by a standard addition method with recoveries of > or = 86% and RSDs of < or = 14% (n = 3).

On-line preconcentration and recovery of palladium from waters using polyaniline (PANI) loaded in mini-column and determination by ICP-MS; elimination of spectral interferences.

The applicability of polyaniline (PANI) for the on-line preconcentration and recovery of palladium from various water samples has been investigated. Batch experiments were performed to optimize conditions such as pH and contact time to achieve quantitative separation of Pd spiked at high (microg ml(-1)) and low levels (ng ml(-1)). During all the steps of the removal process, it was found that Pd was selectively removed by PANI even in the presence of various ions. Quantitative removal of Pd occured in the entire studied pH range (1-12) and the K(d) value was found to be >10(6). Kinetic studies show that a contact time of <4 min was adequate to reach equilibrium. The retained Pd was subsequently eluted with a mixture of HCl and thiourea, optimized using a factorial experimental design approach. ICP-OES was used for the micro-level determinations of Pd whereas ICP-MS was used for the determination of Pd at sub-ppb levels. Breakthrough curve using column experiments demonstrated that PANI has an excellent ability to accumulate up to approximately 120 mg g(-1) of Pd from synthetic sample solutions. A preconcentration factor of about 125 was achieved for Pd when 250 ml of water was passed. PANI columns prepared were used up to 10 times in consecutive retention-elution cycles without appreciable deterioration in their performance. The proposed on-line method also has the ability to remove interfering elements Cu and Y for the determination of Pd in waters by ICP-MS. The reported method has been applied successfully for the determination of Pd in ground water, lake water sea-water and waste water samples. The recoveries were found to be >95% in all cases. These studies indicate that PANI has an excellent ability to preconcentrate Pd from various waters making the method very promising for the determination of Pd.

Removal and preconcentration of inorganic and methyl mercury from aqueous media using a sorbent prepared from the plant Coriandrum sativum.

A sorbent prepared from the plant Coriandrum sativum, commonly known as coriander or Chinese parsley, was observed to remove inorganic (Hg2+) and methyl mercury (CH3Hg+) from aqueous solutions with good efficiency. Batch experiments were carried out to determine the pH dependency in the range 1-10 and the time profiles of sorption for both the species. Removal of both the forms of mercury from spiked ground water samples was found to be efficient and not influenced by other ions. Column experiments with silica-immobilized coriander demonstrated that the sorbent is capable of removing considerable amounts of both forms of mercury from water. The sorption behaviour indicates the major role of carboxylic acid groups in binding the mercury. The studies suggest that the sorbent can be used for the decontamination of inorganic and methyl mercury from contaminated waters.

A rapid ultrasound-assisted thiourea extraction method for the determination of inorganic and methyl mercury in biological and environmental samples by CVAAS.

A rapid ultrasound-assisted extraction procedure for the determination of total mercury, inorganic and methyl mercury (MM) in various environmental matrices (animal tissues, samples of plant origin and coal fly ash) has been developed. The mercury contents were estimated by cold vapour atomic absorption spectrometry (CVAAS). Inorganic mercury (IM) was determined using SnCl(2) as reducing agent whereas total mercury was determined after oxidation of methyl mercury through UV irradiation. Operational parameters such as extractant composition (HNO(3) and thiourea), sonication time and sonication amplitude found to be different for different matrices and were optimized using IAEA-350 (Fish homogenate), IM and MM loaded moss and NIST-1633b (Coal fly ash) to get quantitative extraction of total mercury. The method was further validated through the analysis of additional certified reference materials (RM): NRCC-DORM2 (Dogfish muscle), NRCC-DOLT1 (Dogfish liver) and IAEA-336 (Lichen). Quantitative recovery of total Hg was achieved using mixtures of 5% HNO(3) and 0.02% thiourea, 10% HNO(3) and 0.02% thiourea, 20% HNO(3) and 0.2% thiourea for fish tissues, plant matrices and coal fly ash samples, respectively. The results obtained were in close agreement with certified values with an overall precision in the range of 5-15%. The proposed ultrasound-assisted extraction procedure significantly reduces the time required for sample treatment for the extraction of Hg species. The extracted mercury species are very stable even after 24h of sonication. Closed microwave digestion was also used for comparison purposes. The proposed method was applied for the determination of Hg in field samples of lichens, mosses, coal fly ash and coal samples.