H-Glass Supported Hybrid Gold Nano-Islands for Visible-Light-Driven Hydrogen Evolution.

Flat panel reactors, coated with photocatalytic materials, offer a sustainable approach for the commercial production of hydrogen (H2) with zero carbon footprint. Despite this, achieving high solar-to-hydrogen (STH) conversion efficiency with these reactors is still a significant challenge due to the low utilization efficiency of solar light and rapid charge recombination. Herein, hybrid gold nano-islands (HGNIs) are developed on transparent glass support to improve the STH efficiency. Plasmonic HGNIs are grown on an in-house developed active glass sheet composed of sodium aluminum phosphosilicate oxide glass (H-glass) using the thermal dewetting method at 550 °C under an ambient atmosphere. HGNIs with various oxidation states (Au0, Au+, and Au-) and multiple interfaces are obtained due to the diffusion of the elements from the glass structure, which also facilitates the lifetime of the hot electron to be ≈2.94 ps. H-glass-supported HGNIs demonstrate significant STH conversion efficiency of 0.6%, without any sacrificial agents, via water dissociation. This study unveils the specific role of H-glass-supported HGNIs in facilitating light-driven chemical conversions, offering new avenues for the development of high-performance photocatalysts in various chemical conversion reactions for large-scale commercial applications.

Subnational estimates of vitamin A supplementation coverage in children: a geospatial analysis of 45 low- and middle-income countries.

OBJECTIVES: Vitamin A supplementation (VAS) can protect children from the adverse health consequences of vitamin A deficiency. Granular data on VAS coverage can guide global and national efforts to achieve universal VAS coverage. To provide geographically precise targeting of VAS programs and to monitor progress in reducing geographic disparities, we aimed to create high-resolution (5 × 5 km2) maps of VAS coverage in children under 5 years across VAS priority countries. STUDY DESIGN: We used cross-sectional data from the Demographic and Health Surveys (DHS) program. METHODS: We used data from the DHS program for United Nations Children's Fund -designated VAS priority countries between 2000 and 2017 with data available from 2005 or later. The outcome variable was the proportion of children under 5 years who received a vitamin A dose in each sampled cluster. We applied a Bayesian geostatistical approach incorporating geographic, climatic, and nutritional covariates to estimate VAS coverage for each cell. We estimated and mapped absolute VAS coverage, Bayesian uncertainty intervals, and exceedance probabilities. RESULTS: Our sample included countries from Latin America and the Caribbean, Asia, and Africa. Most countries had estimated VAS coverage levels <70%, and our exceedance probabilities indicated high certainty that our estimates fell below this threshold in most grid cells. International variations were most notable in the Latin America and the Caribbean region and Africa. Intranational variations were greatest in some South Asian and West and Central African countries. CONCLUSIONS: These prevalence and exceedance maps, especially used with data on indicators of VAS need, could help to improve equity.

Multi-Functional Applications of H-Glass Embedded with Stable Plasmonic Gold Nanoislands.

Metal nanoparticles (MNPs) are synthesized using various techniques on diverse substrates that significantly impact their properties. However, among the substrate materials investigated, the major challenge is the stability of MNPs due to their poor adhesion to the substrate. Herein, it is demonstrated how a newly developed H-glass can concurrently stabilize plasmonic gold nanoislands (GNIs) and offer multifunctional applications. The GNIs on the H-glass are synthesized using a simple yet, robust thermal dewetting process. The H-glass embedded with GNIs demonstrates versatility in its applications, such as i) acting as a room temperature chemiresistive gas sensor (70% response for NO2 gas); ii) serving as substrates for surface-enhanced Raman spectroscopy for the identifications of Nile blue (dye) and picric acid (explosive) analytes down to nanomolar concentrations with enhancement factors of 4.8 × 106 and 6.1 × 105 , respectively; and iii) functioning as a nonlinear optical saturable absorber with a saturation intensity of 18.36 × 1015 W m-2 at 600 nm, and the performance characteristics are on par with those of materials reported in the existing literature. This work establishes a facile strategy to develop advanced materials by depositing metal nanoislands on glass for various functional applications.

Superlubricity and Stress-Shielding of Graphene Enables Ultra Scratch-Resistant Glasses.

Glasses, when subjected to scratch loading, incur damages affecting their optical and mechanical integrity. Here, it is demonstrated that silica glasses protected with mechanically exfoliated few-layer graphene sheets can exhibit remarkable improvement in scratch resistance. To this extent, the friction and wear characteristics of silica glasses with exfoliated graphene using atomic force microscopy (AFM) are explored. The friction forces recorded during AFM scratch tests of the graphene-glass surfaces at multiple loads exhibit ∼98% reduction compared to that of the bare silica glass, with the friction coefficient falling in the superlubricity regime. This dramatic reduction in friction achieved by the graphene sheets results in significantly lower wear of the graphene-glass surfaces postscratching. Further investigations employing atomistic simulations reveal that the stress-shielding mechanism is due to the reduced deformation of graphene-glass surfaces, thereby curtailing the overall damage. Altogether, the present work provides a new fillip toward the development of glasses with enhanced scratch resistance exploiting two-dimensional coatings.

Learning the stress-strain fields in digital composites using Fourier neural operator.

Increased demands for high-performance materials have led to advanced composite materials with complex hierarchical designs. However, designing a tailored material microstructure with targeted properties and performance is extremely challenging due to the innumerable design combinations and prohibitive computational costs for physics-based solvers. In this study, we employ a neural operator-based framework, namely Fourier neural operator (FNO), to learn the mechanical response of 2D composites. We show that the FNO exhibits high-fidelity predictions of the complete stress and strain tensor fields for geometrically complex composite microstructures with very few training data and purely based on the microstructure. The model also exhibits zero-shot generalization on unseen arbitrary geometries with high accuracy. Furthermore, the model exhibits zero-shot super-resolution capabilities by predicting high-resolution stress and strain fields directly from low-resolution input configurations. Finally, the model also provides high-accuracy predictions of equivalent measures for stress-strain fields, allowing realistic upscaling of the results.

Role of steric repulsions on the precipitation kinetics and the structure of calcium-silicate-hydrate gels.

The microstructure and properties of calcium-silicate-hydrate (C-S-H) gels are largely controlled by the physicochemical environment during their precipitation. However, the role of the steric repulsive environment induced by the pore solution chemistry on the kinetics, structure, and properties of C-S-H gels remains unclear. Here, we develop two potential formalisms, namely sinusoidal and polynomial, to simulate the role of steric repulsions in C-S-H. The results show excellent agreement with experimental observations of precipitation kinetics and elastic properties. We demonstrate that the repulsive interactions result in delayed precipitation and percolation, and an open and branched microstructure. Interestingly, the elastic properties (which are equilibrium properties) are also significantly affected by these second-neighbor interactions. Overall, the present study demonstrates that the kinetics, structure, and equilibrium properties of colloidal gels are controlled by the steric repulsions induced by the chemical environment.

Ionic Conductivity of Na3Al2P3O12 Glass Electrolytes-Role of Charge Compensators.

In glasses, a sodium ion (Na+) is a significant mobile cation that takes up a dual role, that is, as a charge compensator and also as a network modifier. As a network modifier, Na+ cations modify the structural distributions and create nonbridging oxygens. As a charge compensator, Na+ cations provide imbalanced charge for oxygen that is linked between two network-forming tetrahedra. However, the factors controlling the mobility of Na+ ions in glasses, which in turn affects the ionic conductivity, remain unclear. In the current work, using high-fidelity experiments and atomistic simulations, we demonstrate that the ionic conductivity of the Na3Al2P3O12 (Si0) glass material is dependent not only on the concentration of Na+ charge carriers but also on the number of charge-compensated oxygens within its first coordination sphere. To investigate, we chose a series of glasses formulated by the substitution of Si for P in Si0 glass based on the hypothesis that Si substitution in the presence of Na+ cations increases the number of Si-O-Al bonds, which enhances the role of Na as a charge compensator. The structural and conductivity properties of bulk glass materials are evaluated by molecular dynamics (MD) simulations, magic angle spinning-nuclear magnetic resonance, Raman spectroscopy, and impedance spectroscopy. We observe that the increasing number of charge-imbalanced bridging oxygens (BOs) with the substitution of Si for P in Si0 glass enhances the ionic conductivity by an order of magnitude-from 3.7 × 10-8 S.cm-1 to 3.3 × 10-7 S.cm-1 at 100 °C. By rigorously quantifying the channel regions in the glass structure, using MD simulations, we demonstrate that the enhanced ionic conductivity can be attributed to the increased connectivity of Na-rich channels because of the increased charge-compensated BOs around the Na atoms. Overall, this study provides new insights for designing next-generation glass-based electrolytes with superior ionic conductivity for Na-ion batteries.

Looking through glass: Knowledge discovery from materials science literature using natural language processing.

Most of the knowledge in materials science literature is in the form of unstructured data such as text and images. Here, we present a framework employing natural language processing, which automates text and image comprehension and precision knowledge extraction from inorganic glasses' literature. The abstracts are automatically categorized using latent Dirichlet allocation (LDA) to classify and search semantically linked publications. Similarly, a comprehensive summary of images and plots is presented using the caption cluster plot (CCP), providing direct access to images buried in the papers. Finally, we combine the LDA and CCP with chemical elements to present an elemental map, a topical and image-wise distribution of elements occurring in the literature. Overall, the framework presented here can be a generic and powerful tool to extract and disseminate material-specific information on composition-structure-processing-property dataspaces, allowing insights into fundamental problems relevant to the materials science community and accelerated materials discovery.

Realizing cool and warm white-LEDs based on color controllable (Sr,Ba)2Al3O6F:Eu2+ phosphors obtained via a microwave-assisted diffusion method.

Globally, phosphor converted white-LEDs (W-LEDs) are among the most suitable sources to reduce energy consumption. Nevertheless, modernization of efficient broadband emitting phosphors is most crucial to improve the W-LED performance. Herein, we synthesized a series of novel broadband emitting Sr2-xAl3O6F:xEu2+ phosphors via a new microwave-assisted diffusion method. Rietveld refinement of the obtained X-ray diffraction results was performed to recognize the exact crystal phase and the various cationic sites. Oxygen vacancies (VO) formed under synthetic reducing conditions enabled Sr2Al3O6F to demonstrate bright self-activated bluish emission. Doping of Eu2+ ions unlocked the energy transfer process from the host to the activator ions, owing to which, the self-activated emission diminished and the Eu2+-doped sample showed amplified bluish-green emission. The gradual increase in Eu2+ concentrations regulated the controllable emissions from the bluish (0.34, 0.42) to the greenish (0.38, 0.43) zone under UV excitation. Because of the different absorption preferences of Eu2+ ions located at the different Sr2+ sites, Sr2-xAl3O6F:xEu2+ exhibited bluish-white emission under blue irradiation. A further enhancement in PL intensity had been observed by the cation substitution of Ba2+ for Sr2+ sites in the optimum Sr1.95Al3O6F:0.05Eu2+ phosphor. The as-fabricated W-LEDs utilizing the optimized Sr1.75Ba0.2Al3O6F:0.05Eu2+ phosphor exhibited a cool-white light emission along with a 372 nm NUV-LED and a 420 nm blue-LED with a moderate CRI of 70 and a CCT above 6000 K. Such cool white emission was controlled to natural white with the CCT close to 5000 K, and the CRI above 80 via utilizing a suitable red emitting phosphor. The W-LED performances of the optimized phosphor justified its applicability to produce white light for lighting applications.

Sublethal Impacts of Novaluron on Tarnished Plant Bug (Hemiptera: Miridae) Adults.

Tarnished plant bug, Lygus lineolaris Palisot de Beauvois (Hemiptera: Miridae), has become a primary pest of cotton in the Midsouthern United States. Insect growth regulators such as novaluron are an important part of L. lineolaris management. While novaluron is lethal to nymphs, it does not kill adults, so it has been used when nymphs are the primary stage present. However, cotton yield protection was observed from an application of novaluron when adults were the predominant stage present. To explain this, a series of studies were conducted to examine sublethal impacts of novaluron to L. lineolaris adults. Novaluron ingestion by adults reduced hatch rate and sometimes reduced oviposition rate. Ingestion by either males or females reduced hatch rates, but the reduction was greater from female exposure. Contact exposure of adults with novaluron residues within 1 d of application reduced hatch rate by about 50%, but the impact on oviposition was inconsistent. A field study showed reduced hatch rate from contact exposure to mixed-age natural populations, but the overall net reproductive rate was not reduced. Surface exposure of eggs to novaluron did not reduce hatch rate. Overall, exposure of tarnished plant bug adults to novaluron, regardless of adult age or exposure route, reduced egg viability. However, the impact on oviposition rate and net reproductive rate varied with adult age and exposure route. This understanding of sublethal impacts of novaluron, in addition to lethal impacts on nymphs, should be considered when choosing application times to maximize effects on L. lineolaris populations.

Cardiopulmonary and metabolic physiology during hemodialysis and inter/intradialytic exercise.

Hemodialysis is associated with numerous symptoms and side effects that, in part, may be due to subclinical hypoxia. However, acute cardiopulmonary and metabolic physiology during hemodialysis is not well defined. Intradialytic and interdialytic exercise appear to be beneficial and may alleviate these side effects. To better understand these potential benefits, the acute physiological response to exercise should be evaluated. The aim of this study was to compare and characterize the acute physiological response during hemodialysis, intradialytic exercise, and interdialytic exercise. Cardiopulmonary physiology was evaluated during three conditions: 1) hemodialysis without exercise (HD), 2) intradialytic exercise (IDEx), and 3) interdialytic exercise (Ex). Exercise consisted of 30-min constant load cycle ergometry at 90% V̇O2AT (anaerobic threshold). Central hemodynamics (via noninvasive bioreactance) and ventilatory gas exchange were recorded during each experimental condition. Twenty participants (59 ± 12 yr, 16/20 male) completed the protocol. Cardiac output (Δ = -0.7 L/min), O2 uptake (Δ = -1.4 mL/kg/min), and arterial-venous O2 difference (Δ = -2.0 mL/O2/100 mL) decreased significantly during HD. Respiratory exchange ratio exceeded 1.0 throughout HD and IDEx. Minute ventilation was lower (P = 0.001) during IDEx (16.5 ± 1.1 L/min) compared with Ex (19.8 ± 1.0 L/min). Arterial-venous O2 difference was partially restored further to IDEx (4.6 ± 1.9 mL/O2/100 mL) compared with HD (3.5 ± 1.2 mL/O2/100 mL). Hemodialysis altered cardiopulmonary and metabolic physiology, suggestive of hypoxia. This dysregulated physiology contributed to a greater physiological demand during intradialytic exercise compared with interdialytic exercise. Despite this, intradialytic exercise partly normalized cardiopulmonary physiology during treatment, which may translate to a reduction in the symptoms and side effects of hemodialysis.NEW & NOTEWORTHY This study is the first, to our knowledge, to directly compare cardiopulmonary and metabolic physiology during hemodialysis, intradialytic exercise, and interdialytic exercise. Hemodialysis was associated with increased respiratory exchange ratio, blunted minute ventilation, and impaired O2 uptake and extraction. We also identified a reduced ventilatory response during intradialytic exercise compared with interdialytic exercise. Impaired arterial-venous O2 difference during hemodialysis was partly restored by intradialytic exercise. Despite dysregulated cardiopulmonary and metabolic physiology during hemodialysis, intradialytic exercise was well tolerated.

An adaptive, interacting, cluster-based model for predicting the transmission dynamics of COVID-19.

The SARS-CoV-2 driven disease COVID-19 is pandemic with increasing human and monetary costs. COVID-19 has put an unexpected and inordinate degree of pressure on healthcare systems of strong and fragile countries alike. To launch both containment and mitigation measures, each country requires estimates of COVID-19 incidence as such preparedness allows agencies to plan efficient resource allocation and to design control strategies. Here, we have developed a new adaptive, interacting, and cluster-based mathematical model to predict the granular trajectory of COVID-19. We have analyzed incidence data from three currently afflicted countries of Italy, the United States of America, and India. We show that our approach predicts state-wise COVID-19 spread for each country with reasonable accuracy. We show that Rt, as the effective reproduction number, exhibits significant spatial variations in these countries. However, by accounting for the spatial variation of Rt in an adaptive fashion, the predictive model provides estimates of the possible asymptomatic and undetected COVID-19 cases, both of which are key contributors in COVID-19 transmission. We have applied our methodology to make detailed predictions for COVID19 incidences at the district and state level in India. Finally, to make the models available to the public at large, we have developed a web-based dashboard, namely "Predictions and Assessment of Corona Infections and Transmission in India" (PRACRITI, see http://pracriti.iitd.ac.in), which provides the detailed Rt values and a three-week forecast of COVID cases.

Elucidating the constitutive relationship of calcium-silicate-hydrate gel using high throughput reactive molecular simulations and machine learning.

Prediction of material behavior using machine learning (ML) requires consistent, accurate, and, representative large data for training. However, such consistent and reliable experimental datasets are not always available for materials. To address this challenge, we synergistically integrate ML with high-throughput reactive molecular dynamics (MD) simulations to elucidate the constitutive relationship of calcium-silicate-hydrate (C-S-H) gel-the primary binding phase in concrete formed via the hydration of ordinary portland cement. Specifically, a highly consistent dataset on the nine elastic constants of more than 300 compositions of C-S-H gel is developed using high-throughput reactive simulations. From a comparative analysis of various ML algorithms including neural networks (NN) and Gaussian process (GP), we observe that NN provides excellent predictions. To interpret the predicted results from NN, we employ SHapley Additive exPlanations (SHAP), which reveals that the influence of silicate network on all the elastic constants of C-S-H is significantly higher than that of water and CaO content. Additionally, the water content is found to have a more prominent influence on the shear components than the normal components along the direction of the interlayer spaces within C-S-H. This result suggests that the in-plane elastic response is controlled by water molecules whereas the transverse response is mainly governed by the silicate network. Overall, by seamlessly integrating MD simulations with ML, this paper can be used as a starting point toward accelerated optimization of C-S-H nanostructures to design efficient cementitious binders with targeted properties.

Dynamics of confined water and its interplay with alkali cations in sodium aluminosilicate hydrate gel: insights from reactive force field molecular dynamics.

This paper presents the dynamics of confined water and its interplay with alkali cations in disordered sodium aluminosilicate hydrate (N-A-S-H) gel using reactive force field molecular dynamics. N-A-S-H gel is the primary binding phase in geopolymers formed via alkaline activation of fly ash. Despite attractive mechanical properties, geopolymers suffer from durability issues, particularly the alkali leaching problem which has motivated this study. Here, the dynamics of confined water and the mobility of alkali cations in N-A-S-H is evaluated by obtaining the evolution of mean squared displacements and Van Hove correlation function. To evaluate the influence of the composition of N-A-S-H on the water dynamics and diffusion of alkali cations, atomistic structures of N-A-S-H with Si/Al ratio ranging from 1 to 3 are constructed. It is observed that the diffusion of confined water and sodium is significantly influenced by the Si/Al ratio. The confined water molecules in N-A-S-H exhibit a multistage dynamic behavior where they can be classified as mobile and immobile water molecules. While the mobility of water molecules gets progressively restricted with an increase in Si/Al ratio, the diffusion coefficient of sodium also decreases as the Si/Al ratio increases. The diffusion coefficient of water molecules in the N-A-S-H structure exhibits a lower value than those of the calcium-silicate-hydrate (C-S-H) structure. This is mainly due to the random disordered structure of N-A-S-H as compared to the layered C-S-H structure. To further evaluate the influence of water content in N-A-S-H, atomistic structures of N-A-S-H with water contents ranging from 5-20% are constructed. Qn distribution of the structures indicates significant depolymerization of N-A-S-H structure with increasing water content. Increased conversion of Si-O-Na network to Si-O-H and Na-OH components with an increase in water content helps explain the alkali-leaching issue in fly ash-based geopolymers observed macroscopically. Overall, the results in this study can be used as a starting point towards multiscale simulation-based design and development of durable geopolymers.

Ventilatory and chronotropic incompetence during incremental and constant load exercise in end-stage renal disease: a comparative physiology study.

Maximal O2 uptake is impaired in end-stage renal disease (ESRD), reducing quality of life and longevity. While determinants of maximal exercise intolerance are well defined, little is known of limitation during submaximal constant load exercise. By comparing individuals with ESRD and healthy controls, the aim of this exploratory study was to characterize mechanisms of exercise intolerance in participants with ESRD by assessing cardiopulmonary physiology at rest and during exercise. Resting spirometry and echocardiography were performed in 20 dialysis-dependent participants with ESRD (age: 59 ± 12 yr, 14 men and 6 women) and 20 healthy age- and sex-matched controls. Exercise tolerance was assessed with ventilatory gas exchange and central hemodynamics during a maximal cardiopulmonary exercise test and 30 min of submaximal constant load exercise. Left ventricular mass (292 ± 102 vs. 185 ± 83 g, P = 0.01) and filling pressure (E/e': 6.48 ± 3.57 vs. 12.09 ± 6.50 m/s, P = 0.02) were higher in participants with ESRD; forced vital capacity (3.44 ± 1 vs. 4.29 ± 0.95 L/min, P = 0.03) and peak O2 uptake (13.3 ± 2.7 vs. 24.6 ± 7.3 mL·kg-1·min-1, P < 0.001) were lower. During constant load exercise, the relative increase in the arterial-venous O2 difference (13 ± 18% vs. 74 ± 18%) and heart rate (32 ± 18 vs. 75 ± 29%) were less in participants with ESRD despite exercise being performed at a higher percentage of maximum minute ventilation (48 ± 3% vs. 39 ± 3%) and heart rate (82 ± 2 vs. 64 ± 2%). Ventilatory and chronotropic incompetence contribute to exercise intolerance in individuals with ESRD. Both are potential targets for medical and lifestyle interventions.

On the equivalence of vapor-deposited and melt-quenched glasses.

Vapor deposition can yield glasses that are more stable than those obtained by the traditional melt-quenching route. However, it remains unclear whether vapor-deposited glasses are "allowable" or "forbidden," that is, if they are equivalent to glasses formed by cooling extremely slowly a liquid or if they differ in nature from melt-quenched glasses. Here, based on reactive molecular dynamics simulation of silica glasses, we demonstrate that the allowable or forbidden nature of vapor-deposited glasses depends on the temperature of the substrate and, in turn, is found to be encoded in their medium-range order structure.

Cytokinetic bridge triggers de novo lumen formation in vivo.

Multicellular rosettes are transient epithelial structures that serve as intermediates during diverse organ formation. We have identified a unique contributor to rosette formation in zebrafish Kupffer's vesicle (KV) that requires cell division, specifically the final stage of mitosis termed abscission. KV utilizes a rosette as a prerequisite before forming a lumen surrounded by ciliated epithelial cells. Our studies identify that KV-destined cells remain interconnected by cytokinetic bridges that position at the rosette's center. These bridges act as a landmark for directed Rab11 vesicle motility to deliver an essential cargo for lumen formation, CFTR (cystic fibrosis transmembrane conductance regulator). Here we report that premature bridge cleavage through laser ablation or inhibiting abscission using optogenetic clustering of Rab11 result in disrupted lumen formation. We present a model in which KV mitotic cells strategically place their cytokinetic bridges at the rosette center, where Rab11-associated vesicles transport CFTR to aid in lumen establishment.

A Peridynamics-Based Micromechanical Modeling Approach for Random Heterogeneous Structural Materials.

This paper presents a peridynamics-based micromechanical analysis framework that can efficiently handle material failure for random heterogeneous structural materials. In contrast to conventional continuum-based approaches, this method can handle discontinuities such as fracture without requiring supplemental mathematical relations. The framework presented here generates representative unit cells based on microstructural information on the material and assigns distinct material behavior to the constituent phases in the random heterogenous microstructures. The framework incorporates spontaneous failure initiation/propagation based on the critical stretch criterion in peridynamics and predicts effective constitutive response of the material. The current framework is applied to a metallic particulate-reinforced cementitious composite. The simulated mechanical responses show excellent match with experimental observations signifying efficacy of the peridynamics-based micromechanical framework for heterogenous composites. Thus, the multiscale peridynamics-based framework can efficiently facilitate microstructure guided material design for a large class of inclusion-modified random heterogenous materials.

Influence of Ga2O3, CuGa2O4 and Cu4O3 phases on the sodium-ion storage behaviour of CuO and its gallium composites.

CuO and its gallium composites with various compositions are successfully fabricated by using a hydrothermal technique followed by calcination at 900 °C. The added Ga precursors formed oxides in the composites, such as Ga2O3, CuGa2O4 and Cu4O3, as confirmed through the X-ray diffraction patterns as well as the HRTEM and SAED patterns. Further HRTEM analysis also confirmed that Cu4O3 and CuGa2O4 phases reside on the surface of CuO in the composites with a CuO : Ga ratio of 90 : 10. The contents of various oxide phases varied when we increased the amount of Ga in the CuO composites. Changing the ratios of CuO and Ga precursors in the composites is quite effective in tailoring the sodium-ion storage behaviour of CuO. The resultant CuO/Ga composites exhibit remarkable electrochemical performance for sodium-ion batteries in terms of capacity, rate capability and cycling performance. The composite containing 90% CuO and 10% Cu/Ga oxides delivers the highest charge capacity of 661 mA h g-1 at a current density of 0.07 A g-1 with a capacity retention of 73.1% even after 500 cycles. The structure and morphology of the composite (90% CuO and 10% Cu/Ga oxides) was successfully retained after 500 cycles, which was confirmed through ex situ XRD, SEM and HRTEM analyses. The composite also exhibited remarkable rate capability in which it delivered 96 mA h g-1 even at a high current density of 6.6 A g-1. The enhanced electrochemical performances of CuO and its gallium composites are attributed to the presence of Cu4O3 and CuGa2O4 phases. The Cu4O3 phase is actively involved in the redox reaction and the CuGa2O4 phase stabilizes the CuO phase and buffers the volume expansion of CuO during cycling. The present approach eplores great opportunities for improving the electrochemical performance of oxide based anode materials for sodium-ion batteries.