Liquid Phase Exfoliation of Few-Layer Non-Van der Waals Chromium Sulfide.

Exfoliation of 2D non-Van der Waals (non-vdW) semiconductor nanoplates (NPs) from inorganic analogs presents many challenges ahead for further exploring of their advanced applications on account of the strong bonding energies. In this study, the exfoliation of ultrathin 2D non-vdW chromium sulfide (2D Cr2S3) by means of a combined facile liquid-phase exfoliation (LPE) method is successfully demonstrated. The morphology and structure of the 2D Cr2S3 material are systematically examined. Magnetic studies show an obvious temperature-dependent uncompensated antiferromagnetic behavior of 2D Cr2S3. The material is further loaded on TiO2 nanorod arrays to form an S-scheme heterojunction. Experimental measurements and density functional theory (DFT) calculations confirm that the formed TiO2@Cr2S3 S-scheme heterojunction facilitates the separation and transmission of photo-induced electron/hole pairs, resulting in a significantly enhanced photocatalytic activity in the visible region.

Platinum group nanoparticles doped BCN matrix: Efficient catalysts for the electrocatalytic reduction of nitrate to ammonia.

The effective treatment of nitrate (NO3-) in water as a nitrogen source and electrocatalytic NO3- reduction to ammonia (NH3) (NRA) have become preferred methods for NO3--to-NH3 conversion. Achieving efficient NO3--to-NH3 conversion requires the design and development of electrode materials with high activity and efficiency for the electrocatalytic NRA reaction. Herein, based on the special properties of dodecahydro-closo-dodecaborate anions, a BCN matrix, loaded with platinum-group nanoparticles (namely, Pd/BCN, Pt/BCN, and Ru/BCN), was prepared using a simple method for the electrocatalytic NRA reaction. Results showed that Pd/BCN exerts the best catalytic effect on the NRA reaction. The NH3 production rate reached 12.71 mg h-1 mgcat.-1 at -1.0 V vs. RHE. Faraday efficiency reached 91.79 %, which can be attributed to the more uniform distribution of the nanoparticles. Furthermore, Pd/BCN exhibited high cycling stability and resistance to ionic interference. Moreover, the density functional theory calculations indicated that small and well-distributed Pd nanoclusters in the BCN matrix have a large active surface area and promote the catalytic process. This study provides a new strategy to design catalysts for green ammonia synthesis.

Hydrophilic Cocrystals with Water Switched Luminescence.

Utilizing water molecules to regulate the luminescence properties of solid materials is highly challenging. Herein, we develop a strategy to produce water-triggered luminescence-switching cocrystals by coassembling hydrophilic donors with electron-deficient acceptors, where 1,2,4,5-Tetracyanobenzene (TCNB) was used as the electron acceptor and pyridyl benzimidazole derivatives were used as the electron donors enabling multiple hydrogen-bonds. Two cocrystals, namely 2PYTC and 4PYTC were obtained and showed heat-activated emission, and such emission could be quenched or weakened by adding water molecules. The cocrystal structure exhibited the donor molecule that can form multiple hydro bonds with water and acceptor molecules due to the many nitrogen atoms of them. The analyses of the photophysical data, powder X-ray diffraction, and other data confirmed the reversible fluorescence "on-off" effects were caused by eliminating and adding water molecules in the crystal lattice. The density functional theory calculations indicate that the vibration of the O-H bond of water molecules in the cocrystal can absorb the excitation energy and suppress fluorescence. Furthermore, the obtained cocrystals also showed temperature, humidity, and H+ /NH4 + responsive emission behavior, which allows their applications as thermal and humidity sensors, and multiple information encryptions. This research paves the way for preparing intelligent hydrophilic organic cocrystal luminescent materials.

Synthesis of iron-boride/carbon-nitride composites and their applications in chemodynamic therapy.

Chemodynamic therapy (CDT) is an emerging treatment strategy that inhibits tumor growth by catalyzing the generation of reactive oxygen species (ROS), such as hydroxyl radicals (•OH), using specific nanomaterials. Herein, we have developed a new class of iron-based nanomaterials, i.e., iron-based borides (FeB), using the superchaotropic effect of a boron cluster (closo-[B12H12]2-) and organic ligands, followed by high-temperature calcination. Experimental data and theoretical calculations revealed that FeB nanoparticles exhibit a Fenton-like effect, efficiently decomposing hydrogen peroxide into •OH and thus increasing the concentration of ROS. FeB nanomaterials demonstrate excellent catalytic performance, efficiently generate ROS, and exert significant antitumor effects in cell experiments and animal models. Therefore, FeB nanomaterials have considerable potential for application in tumor treatment and offer new insights for the development of novel and efficient cancer therapy strategies.

Superatom molecular orbital in C80.

The Superatom Molecular Orbitals (SAMO) in fullerene derivatives are of great interests which gives a wide basement for many electronic applications. In this work, the Density Functional Theory reveals the SAMO states of endohedrally doped C80 derivatives with Li, Sc, Mn, Ti, Ca, Fe, and Co atoms in molecular and periodic structures. The choice and position of metal atoms in endohedrally doped C80 derivatives largely affects the orientation of SAMO energies and wavefunction distributions. Among various derivatives, the Co-substituted C80 constitutes the lowest SAMO energy. The charge transfer study infers the influence of metal atoms inside the cage on SAMO energies. At higher energies, pz-, 2s-, and pxy- SAMO bands have been overlapped with higher dispersion bands which depict the increased intermolecular interaction in delocalized bands causing a larger dispersion. These results give new insights for future studies on lowering SAMO energy nearly to the fermi level in higher fullerenes.

Superatom Molecular Orbitals of Endohedral C82.

Understanding superatom molecular orbital (SAMO) states in fullerene derivatives has been in the limelight ever since the first discovery of SAMOs owing to the fundamental interest in this topic as well as to the possible applications in molecular switches and other organic electronics. Nevertheless, very few reports have been published on SAMO states of larger fullerenes so far. Using density functional theory, we attempt to partially remedy this situation by presenting a study on SAMO states in C82 and its Ca and Sc endohedrally doped derivatives, comparing results with previous relevant findings for C60. We find that C82 possesses higher SAMO energies compared to C60, as associated with the symmetry of the molecule, and that endohedral doping leads to energetically favorable side positions of Ca and Sc inside the C82 cage. Among the two, Sc@C82 has more stable SAMO states compared to Ca@C82 as reflected by the shift in the density of states, while the charge states are found to be similar. In the case of the monolayer form, the pz- and 2s-SAMO orbitals overlap with the nearest neighbors, causing parabolic band dispersion with the formation of near free electron states and that the SAMO state energies move closer to the Fermi energy compared to the related molecules. These findings provide promising information about the distribution of SAMO states in C82 fullerene, which can be further relevant in studies of SAMO states of higher fullerenes and for coming applications of these systems.

Direct Observation of Photon Induced Giant Band Renormalization in 2D PdSe2 Dichalcogenide by Transient Absorption Spectroscopy.

Insight into fundamental light-matter interaction as well as underlying photo-physical processes is crucial for the development of novel optoelectronic devices. Palladium diselenide (PdSe2 ), an important representative of emerging 2D noble metal dichalcogenides, has gain considerable attention owing to its unique optical, physical, and chemical properties. In this study, 2D PdSe2 nanosheets (NSs) are prepared using the liquid-phase exfoliation method. A broadband carrier relaxation dynamics from visible to near-infrared bands are revealed using a time-resolved transient absorption spectrometer, giving results that indicate band filling and bandgap renormalization (BGR) effects in the 2D PdSe2 NSs. The observed blue-shift of the transient absorption spectra at the primary stage and the subsequent red-shift can be ascribed to this BGR effect. These findings reveal the many-body character of the 2D TMDs material and may hold keys for applications in the field of optoelectronics and ultrafast photonics.

Copper Ferrite Nanoparticles Synthesized Using Anion-Exchange Resin: Influence of Synthesis Parameters on the Cubic Phase Stability.

Copper ferrite is of great interest to researchers as a material with unique magnetic, optical, catalytic, and structural properties. In particular, the magnetic properties of this material are structurally sensitive and can be tuned by changing the distribution of Cu and Fe cations in octahedral and tetrahedral positions by controlling the synthesis parameters. In this study, we propose a new, simple, and convenient method for the synthesis of copper ferrite nanoparticles using a strongly basic anion-exchange resin in the OH form. The effect and possible mechanism of polysaccharide addition on the elemental composition, yield, and particle size of CuFe2O4 are investigated and discussed. It is shown that anion-exchange resin precipitation leads to a mixture of unstable cubic (c-CuFe2O4) phases at standard temperature and stable tetragonal (t-CuFe2O4) phases. The effect of reaction conditions on the stability of c-CuFe2O4 is studied by temperature-dependent XRD measurements and discussed in terms of cation distribution, cooperative Jahn-Teller distortion, and Cu2+ and oxygen vacancies in the copper ferrite lattice. The observed differences in the values of the saturation magnetization and coercivity of the prepared samples are explained in terms of variations in the particle size and structural properties of copper ferrite.

Cyclo[18]carbon Formation from C18Br6 and C18(CO)6 Precursors.

Although cyclo[18]carbon has been isolated experimentally from two precursors, C18Br6 and C18(CO)6, no reaction mechanisms have yet been explored. Herein, we provide insight into the mechanism behind debromination and decarbonylation. Both neutral precursors demonstrate high activation barriers of ∼2.3 eV, while the application of an electric field can lower the barriers by 0.1-0.2 eV. The barrier energy of the anion-radicals is found to be significantly lower for C18Br6 compared to C18(CO)6, confirming a considerably higher yield of cylco[18]carbon when the C18Br6 precursor is used. Elongation of the C-Br bond in the anion-radical confirms its predissociation condition. Natural bonding orbital analysis shows that the stability of C-Br and C-CO bonds in the anion-radicals is lower compared to their neutral species, indicating a possible higher yield. The applied analysis provides crucial details regarding the reaction yield of cyclo[18]carbon and can serve as a general scheme for tuning reaction conditions for other organic precursors.

Optical Properties of Few-Layer Ti3CN MXene: From Experimental Observations to Theoretical Calculations.

Despite the emerging interest in research and development of Ti3CN MXene nanosheet (NS)-based optoelectronic devices, there is still a lack of in-depth studies of the underlying photophysical processes, like carrier relaxation dynamics and nonlinear photon absorption, operating in such devices, hindering their further and precise design. In this paper, we attempt to remedy the situation by fabricating few-layer Ti3CN NSs via combining selective etching and molecular intercalation and by investigating the carrier relaxation possesses and broadband nonlinear optical responses via transient absorption and Z-scan techniques. These results are complemented by first-principle theoretical analyses of the optical properties. Both saturable absorption and reverse saturable absorption phenomena are observed due to multiphoton absorption effects. The analysis of these results adds to the understanding of the basic photophysical processes, which is anticipated to be beneficial for the further design of MXene-based devices.

A Facile Approach for Elemental-Doped Carbon Quantum Dots and Their Application for Efficient Photodetectors.

The present work demonstrates a facile hydrothermal approach to synthesize lanthanide-doped carbon quantum dots (CQDs) with europium and/or gadolinium elements. Taking the advantage of broadband adsorption in the ultraviolet-visible region, the doped QDs are directly used as building blocks for photo-electrochemical (PEC)-type photodetectors (PDs) and their performance is systematically investigated under various conditions. The europium (Eu) and gadolinium (Gd) co-doped (C:EuGd) QDs exhibit better photo-response than the single-elemental doped ones and also show outstanding long-term stability. According to the apparent response to light from 350 to 400 nm, the C:EuGd QDs are demonstrated to hold great potential for narrow-band PDs. This work highlights the practical applications of lanthanide-doped CQDs for PDs, and the results are beneficial for the development of elemental-doped CQDs in general.

Direct Visualization of Nearly Free Electron States Formed by Superatom Molecular Orbitals in a Li@C60 Monolayer.

Using scanning tunneling microscopy (STM) and density functional theory (DFT) calculations, we directly determine the spatial and energetic distributions of superatom molecular orbitals (SAMOs) of an Li@C60 monolayer adsorbed on a Cu(111) surface. Utilizing a weakly bonded [Li+@C60] NTf2- (NTf2-: bis(trifluoromethanesulfonyl)imide) salt makes it possible to produce a Li@C60 monolayer with high concentration of Li@C60 molecules. Because of the very uniform adsorption geometry of Li@C60 on Cu(111), the pz-SAMO, populated above the upper hemisphere of the molecule, exhibits an isotropic and delocalized nature, with an energy that is significantly lower compared to that of C60. The isotropic overlapping of pz-SAMOs in the condensed monolayer of Li@C60 results in a laterally homogeneous STM image contributing to the formation of a free-electron-like states. These findings make an important step toward further basic research and applicative utilization of Li@C60 SAMOs.

Single-layer polymeric tetraoxa[8]circulene modified by s-block metals: toward stable spin qubits and novel superconductors.

Tunable electronic properties of low-dimensional materials have been the object of extensive research, as such properties are highly desirable in order to provide flexibility in the design and optimization of functional devices. In this study, we account for the fact that such properties can be tuned by embedding diverse metal atoms and theoretically study a series of new organometallic porous sheets based on two-dimensional tetraoxa[8]circulene (TOC) polymers doped with alkali or alkaline-earth metals. The results reveal that the metal-decorated sheets change their electronic structure from semiconducting to metallic behaviour due to n-doping. Complete active space self-consistent field (CASSCF) calculations reveal a unique open-shell singlet ground state in the TOC-Ca complex, which is formed by two closed-shell species. Moreover, Ca becomes a doublet state, which is promising for magnetic quantum bit applications due to the long spin coherence time. Ca-doped TOC also demonstrates a high density of states in the vicinity of the Fermi level and induced superconductivity. Using the ab initio Eliashberg formalism, we find that the TOC-Ca polymers are phonon-mediated superconductors with a critical temperature TC = 14.5 K, which is within the range of typical carbon based superconducting materials. Therefore, combining the proved superconductivity and the long spin lifetime in doublet Ca, such materials could be an ideal platform for the realization of quantum bits.

Applications of Few-Layer Nb2C MXene: Narrow-Band Photodetectors and Femtosecond Mode-Locked Fiber Lasers.

Although the physicochemical properties of niobium carbide (Nb2C) have been widely investigated, their exploration in the field of photoelectronics is still at the infancy stage with many potential applications that remain to be exploited. Hence, it is demonstrated here that few-layer Nb2C MXene can serve as an excellent building block for both photoelectrochemical-type photodetectors (PDs) and mode-lockers. We show that the photoresponse performance can be readily adjusted by external conditions and that Nb2C NSs exhibit a great potential for narrow-band PDs. The demonstrated mechanism was further confirmed by work functions predicted by density functional theory calculations. In addition, as an optical switch for passively mode-locked fiber lasers, ultrastable pulses can be demonstrated in the telecommunication and mid-infrared regions for Nb2C MXene, and as high as the 69th harmonic order with 411 MHz at the center wavelength of 1882 nm can be achieved. These intriguing results indicate that few-layer Nb2C nanosheets can be used as building blocks for various photoelectronic devices, further broadening the application prospects of two-dimensional MXenes.

Hetero-MXenes: Theory, Synthesis, and Emerging Applications.

Since their discovery in 2011, MXenes (abbreviation for transition metal carbides, nitrides, and carbonitrides) have emerged as a rising star in the family of 2D materials owing to their unique properties. Although the primary research interest is still focused on pristine MXenes and their composites, much attention has in recent years been paid also to MXenes with diverse compositions. To this end, this work offers a comprehensive overview of the progress on compositional engineering of MXenes in terms of doping and substituting from theoretical predictions to experimental investigations. Synthesis and properties are briefly introduced for pristine MXenes and then reviewed for hetero-MXenes. Theoretical calculations regarding the doping/substituting at M, X, and T sites in MXenes and the role of vacancies are summarized. After discussing the synthesis of hetero-MXenes with metal/nonmetal (N, S, P) elements by in situ and ex situ strategies, the focus turns to their emerging applications in various fields such as energy storage, electrocatalysts, and sensors. Finally, challenges and prospects of hetero-MXenes are addressed. It is anticipated that this review will be beneficial to bridge the gap between predictions and experiments as well as to guide the future design of hetero-MXenes with high performance.

Ultra-Small 2D PbS Nanoplatelets: Liquid-Phase Exfoliation and Emerging Applications for Photo-Electrochemical Photodetectors.

2D PbS nanoplatelets (NPLs) form an emerging class of photoactive materials and have been proposed as robust materials for high-performance optoelectronic devices. However, the main drawback of PbS NPLs is the large lateral size, which inhibits their further investigations and practical applications. In this work, ultra-small 2D PbS NPLs with uniform lateral size (11.2 ± 1.7 nm) and thickness (3.7 ± 0.9 nm, ≈6 layers) have been successfully fabricated by a facile liquid-phase exfoliation approach. Their transient optical response and photo-response behavior are evaluated by femtosecond-resolved transient absorption and photo-electrochemical (PEC) measurements. It is shown that the NPLs-based photodetectors (PDs) exhibit excellent photo-response performance from UV to the visible range, showing extremely high photo-responsivity (27.81 mA W-1 ) and remarkable detectivity (3.96 × 1010 Jones), which are figures of merit outperforming currently reported PEC-type PDs. The outstanding properties are further analyzed based on the results of first-principle calculations, including electronic band structure and free energies for the oxygen evolution reaction process. This work highlights promising applications of ultra-small 2D PbS NPLs with the potential for breakthrough developments also in other fields of optoelectronic devices.

Multidimensional Structure Conformation of Persulfurated Benzene for Highly Efficient Phosphorescence.

It is a challenge to acquire, realize, and comprehend highly emissive phosphorescent molecules. Herein, we report that, using persulfurated benzene compounds as models, phosphorescence can be strongly enhanced through the modification of molecular conformation and crystal growth conditions. By varying the peripheral groups in these compounds, we were able to control their molecular conformation and crystal growth mode, leading to one- (1D), two- (2D), and three-dimensional (3D) crystal morphologies. Two kinds of typical molecular conformations were separately obtained in these crystals through substituent group control or the solvent effect. Importantly, a symmetrical 3,3-conformer exhibits that a planar central benzene ring prefers a 3D-type crystal growth mode, demonstrating high phosphorescence efficiency. Such outcome is attributed to the strong crystal protection effect of the 3D crystal and the bright global minimum (GM) boat-like T1 state of the symmetrical 3,3-conformer. The conformation studies further reveal small deformation of the inner benzene ring in both singlet and triplet states. The GM boat-like T1 state is indicated by theoretical calculations, which is far away from the conical intersection (CI) point between the S0 and T1 potential energy surfaces. Meanwhile, the small energy gap between S1 and T1 states and the considerable spin-orbit coupling matrix elements allow an efficient population of the T1 state. Combined with the crystal protection and conformation effect, the 3,3-conformer crystal shows high phosphorescence efficiency. The unsymmetrical 2,4-conformer conformation with the twisted central benzene ring leads to 1D or 2D crystal growth mode, which has a weak crystal protection effect. In addition, the unsymmetrical conformation has a dark GM T1 state that is very close to the T1-S0 CI point, implying an efficient nonradiative T1-S0 quenching. Thus, weak phosphorescence was observed from the unsymmetrical conformation. This study provides an insight for the development of highly emissive phosphorescent materials.

Two-Dimensional Gold Halides: Novel Semiconductors with Giant Spin-Orbit Splitting and Tunable Optoelectronic Properties.

We introduce a new family of 2D materials with unique structure and optoelectronic properties, namely, single-layer gold(I) halides (AuHals). We propose their stability as well as structural, electronic, and optical properties using first-principles calculations. The cleavage energy is found to be similar to that of graphene from graphite, indicating the possibility for mechanical exfoliation. We show that AuHals are stable and have tunable direct (AuBr) and indirect (AuI) band gaps depending on the number of layers. We discuss the possible origin of the giant spin-orbit coupling (SOC) induced conduction band splitting in terms of orbital-decomposed band structure to guide future investigations on the design of materials with highly effective SOC. Exceptionally high excitonic binding energy, high hole mobility, and tunable band gaps indicate that AuHals are promising candidates for optoelectronic devices with excellent performance.

Efficient Ambient Electrocatalytic Ammonia Synthesis by Nanogold Triggered via Boron Clusters Combined with Carbon Nanotubes.

Currently, the development of stable electrochemical nitrogen reduction reaction (ENRR) catalysts with high N2 conversion activity and low cost to instead of the traditional Haber-Bosch ammonia production process of high-energy consumption remains a great challenge for researchers. Here, we have immobilized reductive closo-[B12H11]- boron clusters on a carbon nanotubes (CNT) surface and have successfully prepared a novel Au-CNT catalyst with extraordinary ENRR activity after adding HAuCl4 to the CNT-[B12H11]- precursor. The excellent properties of ammonia yield (57.7 µg h-1 cm-2) and Faradaic efficiency (11.97%) make it possible to achieve using this Au-CNT catalyst in large-scale industrial production of ammonia. Furthermore, its outstanding cyclic stability and long-term tolerability performance make it one of the most cost-effective catalysts to date. Here, by means of density functional theory we disclose the associative mechanism of N2-to-NH3 conversion on the Au(111) surface, providing visual theoretical support for the experimental results.

BCN-Encapsulated Nano-nickel Synergistically Promotes Ambient Electrochemical Dinitrogen Reduction.

The electricity provided by solar or wind power can drive nitrogen in the atmosphere, combining with ubiquitous water to form ammonia, and distributed production methods can alleviate the irreversible damage to the environment caused by the energy-intensive Haber-Bosch process. Here, we have designed a novel Ni-doped BCN heterojunction (S/M-BOPs-1) as a catalyst for the electrochemical nitrogen reduction reaction (NRR). The ammonia yield rate and Faraday efficiency in NRR driven by S/M-BOPs-1 reach up to 16.72 µg-1 h-1 cm-2 and 13.06%, respectively. Moreover, S/M-BOPs-1 still maintains high NRR activity and excellent stability after recycling for eight times and long-time operation of 12 h. Using density functional theory calculations, we reveal a possible NRR path for N2 to NH3 on Ni, BCN, and the S/M-BOPs-1 composite surfaces. The interaction between the BCN matrix and Ni nanoparticles promotes a synergetic effect for the electrochemical NRR efficiency due to the partial electron transfer from the Ni particles to BCN that inhibits hydrogen evolution reaction and decreases the rate-determining step on Ni surfaces toward NRR by ∼1.5 times. Therefore, efficient NRR performance can be achieved by tuning the electronic properties of non-noble metals via the formation of a heterointerface.