3D CoMoO4 nanoflake arrays decorated disposable pencil graphite electrode for selective and sensitive enzyme-less electrochemical glucose sensors.

Three-dimensional (3D) cobalt molybdate (CoMoO4) hierarchical nanoflake arrays on pencil graphite electrode (PGE) (CoMoO4/PGE) are actualized via one-pot hydrothermal technique. The morphological features comprehend that the CoMoO4 nanoflake arrays expose the 3D, open, porous, and interconnected network architectures on PGE. The formation and growth mechanisms of CoMoO4 nanostructures on PGE are supported with different structural and morphological characterizations. The constructed CoMoO4/PGE is operated as an electrocatalytic probe in enzyme-less electrochemical glucose sensor (ELEGS), confronting the impairments of cost- and time-obsessed conventional electrode polishing and catalyst amendment progressions and obliged the employment of a non-conducting binder. The wide-opened interior and exterior architectures of CoMoO4 nanoflake arrays escalate the glucose utilization efficacy, whilst the intertwined nanoflakes and graphitic carbon layers, respectively, of CoMoO4 and PGE articulate the continual electron mobility and catalytically active channels of CoMoO4/PGE. It jointly escalates the ELEGS concerts of CoMoO4/PGE including high sensitivity (1613 µA mM-1 cm-2), wide linear glucose range (0.0003-10 mM), and low detection limit (0.12 µM) at a working potential of 0.65 V (vs. Ag/AgCl) together with the good recovery in human serum. Thus, the fabricated CoMoO4/PGE extends exclusive virtues of modest electrode production, virtuous affinity, swift response, and excellent sensitivity and selectivity, exposing innovative prospects to reconnoitring the economically viable ELEGSs with binder-free, affordable cost, and expansible 3D electrocatalytic probes.

Supercritical CO2 Synthesis of Freestanding Se1-x S x Foamy Cathodes for High-Performance Li-Se1-x S x Battery.

Selenium-sulfur solid solutions (Se1-x S x ) are considered to be a new class of promising cathodic materials for high-performance rechargeable lithium batteries owing to their superior electric conductivity than S and higher theoretical specific capacity than Se. In this work, high-performance Li-Se1-x S x batteries employed freestanding cathodes by encapsulating Se1-x S x in a N-doped carbon framework with three-dimensional (3D) interconnected porous structure (NC@SWCNTs) are proposed. Se1-x S x is uniformly dispersed in 3D porous carbon matrix with the assistance of supercritical CO2 (SC-CO2) technique. Impressively, NC@SWCNTs host not only provides spatial confinement for Se1-x S x and efficient physical/chemical adsorption of intermediates, but also offers a highly conductive framework to facilitate ion/electron transport. More importantly, the Se/S ratio of Se1-x S x plays an important role on the electrochemical performance of Li- Se1-x S x batteries. Benefiting from the rationally designed structure and chemical composition, NC@SWCNTs@Se0.2S0.8 cathode exhibits excellent cyclic stability (632 mA h g-1 at 200 cycle at 0.2 A g-1) and superior rate capability (415 mA h g-1 at 2.0 A g-1) in carbonate-based electrolyte. This novel NC@SWCNTs@Se0.2S0.8 cathode not only introduces a new strategy to design high-performance cathodes, but also provides a new approach to fabricate freestanding cathodes towards practical applications of high-energy-density rechargeable batteries.

Optimised spectral effects of programmable LED arrays (PLA)s on bioelectricity generation from algal-biophotovoltaic devices.

The biophotovoltaic cell (BPV) is deemed to be a potent green energy device as it demonstrates the generation of renewable energy from microalgae; however, inadequate electron generation from microalgae is a significant impediment for functional employment of these cells. The photosynthetic process is not only affected by the temperature, CO2 concentration and light intensity but also the spectrum of light. Thus, a detailed understanding of the influences of light spectrum is essential. Accordingly, we developed spectrally optimized light using programmable LED arrays (PLA)s to study the effect on algae growth and bioelectricity generation. Chlorella is a green microalga and contains chlorophyll-a (chl-a), which is the major light harvesting pigment that absorbs light in the blue and red spectrum. In this study, Chlorella is grown under a PLA which can optimally simulate the absorption spectrum of the pigments in Chlorella. This experiment investigated the growth, photosynthetic performance and bioelectricity generation of Chlorella when exposed to an optimally-tuned light spectrum. The algal BPV performed better under PLA with a peak power output of 0.581 mW m-2 for immobilized BPV device on day 8, which is an increase of 188% compared to operation under a conventional white LED light source. The photosynthetic performance, as measured using pulse amplitude modulation (PAM) fluorometry, showed that the optimized spectrum from the PLA gave an increase of 72% in the rETRmax value (190.5 µmol electrons m-2 s-1), compared with the conventional white light source. Highest algal biomass (1100 mg L-1) was achieved in the immobilized system on day eight, which translates to a carbon fixation of 550 mg carbon L-1. When artificial light is used for the BPV system, it should be optimized with the light spectrum and intensity best suited to the absorption capability of the pigments in the cells. Optimum artificial light source with algal BPV device can be integrated into a power management system for low power application (eg. environment sensor for indoor agriculture system).

Environmentally Benign Carbon Nanodots Prepared from Lemon for the Sensitive and Selective Fluorescence Detection of Fe(III) and Tannic Acid.

Photoluminescent carbon nanodots (CNDs) were prepared using a biocarbon source of lemon extract. The obtained CNDs are of spherical shape and are enriched with the carboxylic acid fucntionalities. CNDs exhibited a fluorescence emission at 445 nm and unveiled blue luminescence in ultraviolet excitation. The influences of pH and ionic strength toward the stability of CNDs were investigated in detail and the obtained stability authenticates their applicability in different environmental conditions. The competitive binding of Fe3+ with CNDs quenches the fluorescence behavior of CNDs and was further quenched with the selective complex formation of Fe3+ with tannic acid (TA). The interference experiments specified that CNDs-Fe3+ assembly selectively detected TA and the co-existing molecules have not influenced the quenching effect of TA with CNDs-Fe3+. The analytical reliability of constructed sensor was validated from the recovery obtained in the range of 91.66-107.02% in real samples. Thus the low cost and environmentally benign CNDs prepared from natural biomass provide new avenues in the fluorescence detection of biologically significant metal ions and biomolecules, facilitating their competency in on-site applications of real environmental samples.

Curcuma mangga-Mediated Synthesis of Gold Nanoparticles: Characterization, Stability, Cytotoxicity, and Blood Compatibility.

The utilization of toxic chemicals as reducing and stabilizing agents in the preparation of gold nanoparticles (AuNPs) has increased in vivo toxicity and thus limited its application in clinical settings. Herein, we propose an alternative method of preparing highly stable AuNPs, where non-toxic Curcuma mangga (CM) extract was used as a single reducing and stabilizing agent to overcome the aforementioned constraints. The morphological images enunciated that the homogeneously dispersed AuNPs exhibited spherical morphology with an average particle diameter of 15.6 nm. Fourier Transform infrared (FTIR) and cyclic voltammetry analysis demonstrated that carbonyl groups of terpenoids in CM extract played an important role in the formation and stabilization of AuNPs. Green-synthesized AuNPs were found to have good stability in physiological media after 24 h of dispersion. The AuNPs were also cytocompatible with human colon fibroblast cell (CCD-18Co) and human lung fibroblast cell (MRC-5). Hemocompatibility tests revealed that the AuNPs were blood-compatible, with less than 10% of hemolysis without any aggregation of erythrocytes. The current study suggests potential in employing a CM-extract-based method in the preparation of AuNPs for anticancer diagnosis and therapy.

The Influence of Chitosan Substrate and Its Nanometric Form Toward the Green Power Generation in Sediment Microbial Fuel Cell.

A simple, environmental friendly and biologically important sediment interfaced fuel cell was developed for the green energy generation. The soil sediment used for the study is enriched of rich anthropogenic free organic carbon, sufficient manganese and high level potassium contents as evidenced from the geochemical characterizations. The saccharides produced by the catalytic reaction of substrate chitosan were utilized for the growth of microorganisms and electron shuttling processes. Chitosan substrate influenced sediment microbial fuel cells exhibited the nearly two fold power increment over the substrate free fuel cells. The fuel cell efficiencies were further increased by bringing the substrate chitosan at nanometric level, which is nearly three and two fold higher than that of substrate free and chitosan influenced sediment microbial fuel cells, respectively, and the influential parameters involved in the power and longevity issues were addressed with different perspectives.

Synthesis of Iron Nanoparticles Using Azadirachta indica Extract and Its Catalytic Activity Toward Nitrophenol Reduction.

A simple, hasty and eco-friendly approach for the synthesis of iron nanoparticles has been developed using the medicinally important Azadirachta indica extract, which act as both reducing and stabilizing agent. The formation and morphological properties of iron nanoparticles as a function of metallic precursor and Azadirachta indica extract concentration have been investigated. The influence of solvent over the size and texture of iron nanoparticles has also been evaluated in detail. The thermal behavior of prepared nanoparticles was identified from thermogravimetric analysis. Furthermore, the catalytic activity of prepared iron nanoparticles toward the reduction of p-nitrophenol was analyzed and the reduction process was occurred within 30 sec. The cost and time efficient biosynthesis process and excellent catalytic activity of the prepared iron nanoparticles construct this protocol attractive.

Graphene oxide/carbon nanotube composite hydrogels-versatile materials for microbial fuel cell applications.

Carbonaceous nanocomposite hydrogels are prepared with an aid of a suspension polymerization method and are used as anodes in microbial fuel cells (MFCs). (Poly N-Isopropylacrylamide) (PNIPAM) hydrogels filled with electrically conductive carbonaceous nanomaterials exhibit significantly higher MFC efficiencies than the unfilled hydrogel. The observed morphological images clearly show the homogeneous dispersion of carbon nanotubes (CNTs) and graphene oxide (GO) in the PNIPAM matrix. The complex formation of CNTs and GO with NIPAM is evidenced from the structural characterizations. The effectual MFC performances are influenced by combining the materials of interest (GO and CNTs) and are attributed to the high surface area, number of active sites, and improved electron-transfer processes. The obtained higher MFC efficiencies associated with an excellent durability of the prepared hydrogels open up new possibilities for MFC anode applications.

Recent advances and challenges in the anode architecture and their modifications for the applications of microbial fuel cells.

Microbial fuel cells (MFC), the ergonomic technology connects the liaison of fuel cell architecture and biological resources. Many viable applications like wastewater treatment, biosensors and bioremediation can be made possible with the help of MFCs. This technology is still at its toddler stage and immense works are still in progress to increase the volumetric energy density of MFCs. The overall performance of MFC depends on the cardinal part of the system; anode. A number of anode materials are currently in research to adjudge the better one in terms of the startup time, power output and durability. A wide range of possibilities are now currently available in the fabrication and modification of anode materials to substantially increase the power performances. This review adumbrates the significant requirements of anodes that are essential to be fulfilled, encompasses the aspiring research efforts which have been devoted so far in the anode modification and fabrication strategies to increase the power output, durability and compatibility of the anode interface with the inoculated microorganisms.