Microwave-assisted synthesis of Limonia acidissima Groff gum stabilized palladium nanoparticles for colorimetric glucose sensing.

Herein, we present a novel microwave-assisted method for the synthesis of palladium nanoparticles (PdNPs) supported by Limonia acidissima Groff tree extract gum. The synthesized PdNPs were characterized using various analytical techniques, including FTIR, SEM, TEM, UV-visible, and powder XRD analyses. TEM and XRD analysis confirmed that the synthesized LAG-PdNPs are highly crystalline nature spherical shapes with an average size diameter of 7-9 nm. We employed these gum-capped PdNPs to investigate their peroxidase-like activity for colorimetric detection of hydrogen peroxide (H2O2) and glucose. The oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H2O2, catalyzed by PdNPs, produces oxidation products quantified at 652 nm using spectrophotometry. The catalytic activity of PdNPs was optimized with respect to temperature and pH. The developed method exhibited a linear range of detection from 1 to 50 µm, with detection limits of 0.35 µm for H2O2 and 0.60 µm for glucose.

Correlation between the particle size, structural and photoluminescence spectra of nano NiCr2O4 and La doped NiCr2O4 materials.

Nano NiCr2O4 undoped and La doped NiCr2O4 nanorods array were successfully prepared by solution based conventional method[sbcm]. The synthesized samples were characterized by the diffuse reflectance spectroscopy (DRS) and photoluminescence (PL) spectroscopy for finding optical properties. Further, the samples structure confirmed by Fourier transforms infrared (FTIR), and X-ray diffraction (XRD)techniques. High-resolution transmission electron microscopy (HRTEM) analysis revealed the attachment of NiCr2O4 nanorods on surface of nanoparticles. From the results, it was found that the reaction time, band gap energy, and particle size strongly influenced by changing the concentration of La in NiCr2O4. This work is notable for its examination of the impact of the precursor on the optical and structural characteristics of samples of La-doped and undoped NiCr2O4. This was the first time the investigation had been done. The average particle size of the La-doped and undoped NiCr2O4 samples is between 16 and 24 nm.

Comparative risk assessment studies estimating the hazard posed by long-term consumption of PPCPs in river water.

This study assesses the risk due to Emerging Contaminants (ECs), present in Indian rivers - Ganga (650 million inhabitants), Yamuna (57 million inhabitants), and Musi (7,500,000 inhabitants), 13 ECs in total, have been used for risk assessment studies. Their concentrations (e.g., Fluconazole: 236950 µg/l, Ciprofloxacin: 31000 µg/l, Caffeine: 21.57 µg/l, etc.) were higher than the threshold concentrations for safe consumption (e.g. Fluconazole allowable level is 3.8 µg/l, and Ciprofloxacin allowable level is 0.51 µg/l). Three different pathways of emerging contaminants (ECs) transfer (oral water ingestion, oral fish ingestion, and dermal water contact) have been considered and the study is carried out in 2 ways: (i) deterministic and (ii) probabilistic approaches (using Monte Carlo iterative methods with 10000 simulations) with the aid of a software - Risk (version 7.5). The risk value, quantified by Hazard Quotient (HQ) is higher than the allowable limit of 1 for several compounds in the three rivers like Fluconazole (HQ = 18276.713), Ciprofloxacin (HQ = 278.675), Voriconazole (HQ = 14.578), Cetirizine (HQ = 1006.917), Moxifloxacin (HQ = 8.076), Caffeine (HQ = 55.150), and Ibuprofen (HQ = 9.503). Results show that Fluconazole and Caffeine pose the maximum risk in the rivers via the "oral pathway" that allows maximum transfer of the ECs present in the river (93% and 82% contribution to total risk). The risk values vary from nearly 25 times to 19000 times the United States Environmental Protection Agency (USEPA) threshold limit of 1 (e.g., Caffeine Infant Risk = 25.990 and Fluconazole Adult Risk = 18276.713). The most susceptible age group, from this study, is "Adults" (19-70 years old), who stand the chance of experiencing the adverse health hazards associated with prolonged over-exposure to the ECs present in the river waters. Musi has the maximum concentration of pollutants and requires immediate remediation measures. Further, both methods indicate that nearly 60-70% of the population in all the three study areas are at risk of developing health hazards associated with over-exposure to ECs regularly, making the areas inhabitable.

Exploring Modified Rice Straw Biochar as a Sustainable Solution for Simultaneous Cr(VI) and Pb(II) Removal from Wastewater: Characterization, Mechanism Insights, and Application Feasibility.

This study aimed to investigate the efficacy of a rice straw biosorbent in batch adsorption for the removal of chromium (Cr(VI)) and lead (Pb(II)) heavy-metal ions from wastewater. The biosorbent was chemically synthesized and activated by using concentrated sulfuric acid. The produced biosorbent was then characterized by using Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) analyses, which provided insights into surface morphology and functional groups. The study examined the effects of pH, rice straw dose, ion concentration, and contact time on metal ion adsorption. Optimal conditions for efficient removal (95.57% for Cr(VI) and 85.68% for Pb(II)) were achieved at a pH of 2.0, a biosorbent dose of 2 g/L, an initial concentration of 20 mg/L, and a contact time of 50 min in synthetic solutions. The isotherms and kinetics model fitting results found that both metal ion adsorption processes were multilayer on the hetero surface of rice straw biosorbent via rate diffusion kinetics. Thermodynamic investigations were conducted, and the results strongly indicate that the adsorption process is endothermic and spontaneous. Notably, the results indicated that the highest desorption rate was achieved by adding 0.3 N HCl to the system.

Isomerization of C7 and C8 through Ionic Liquids Supported by a Fe/SBA-15 Catalyst.

Isomerization is extensively utilized in the petroleum industry, and this study demonstrates an energy-efficient process utilizing an ionic liquid catalyst. 1-Ethyl-3-methylimidazolium triflate [Emim][TFO] as an ionic liquid was immobilized on solid support Fe/SBA-15. Variants of the catalyst were developed with the Fe constant at 5% and different ratios of ionic liquid. In the catalyst Fe/[Emim][TFO]/SBA-15, the metal Fe was loaded via the impregnation method, and subsequently, the ionic liquid variants Fe/[Emim][TFO](10)/SBA-15, Fe/[Emim][TFO](20)/SBA-15, and Fe/[Emim][TFO](30)/SBA-15 were synthesized. The physical properties of the synthesized catalyst were studied using standard characteristic techniques. The process performance was studied for variants of each parameter, which include temperature, hydrogen flow rate, pressure, and weight hourly space velocity. The iso-products of n-heptane and n-octane were obtained with an appreciable conversion of >90% and a selectivity of >95% with the catalyst Fe/[Emim][TFO](20)/SBA-15 among the other synthesized catalysts. The process yielded a high quantum of iso-products with negligible cracked products at a low temperature of 140 °C. The catalyst Fe/[Emim][TFO](20)/SBA-15 at 140 °C delivered the highest yield of iso-alkanes among the three catalysts. Iso-alkanes are instrumental tools for increasing the octane number of a fuel. This study delivers high iso-alkane content fuel, which can provide the best anti knock capability and enhance fuel efficiency for the life of modern high-powered engines. The results demonstrate a process that is energy-efficient, economic, and environmentally friendly.

Enhancing Electrochemical Performance with g-C3N4/CeO2 Binary Electrode Material.

An innovative form of 2D/0D g-C3N4/CeO2 nanostructure was synthesized using a simple precursor decomposition process. The 2D g-C3N4 directs the growth of 0D CeO2 quantum dots, while also promoting good dispersion of CeO2QDs. This 2D/0D nanostructure shows a capacitance of 202.5 F/g and notable rate capability and stability, outperforming the g-C3N4 electrode, reflecting the state-of-the-art g-C3N4 binary electrodes. The binary combination of materials also enables an asymmetric device (g-C3N4/CeO2QDs//AC) to deliver the highest energy density (9.25 Wh/kg) and power density (900 W/kg). The superior rate capacity and stability endorsed the quantum structural merits of CeO2QDs and layered g-C3N4, which offer more accessible sites for ion transport. These results suggest that the g-C3N4/CeO2QDs nanostructure is a promising electrode material for energy storage devices.

Effect of Compatibilizer on the Persistent Luminescence of Polypropylene/Strontium Aluminate Composites.

There is a demand for long afterglow composites due to their potential applications in nighttime signal boards, sensors, and biomedical areas. In this study, Polypropylene (PP)/strontium aluminate-based composites [SrAl2O4:Eu2+/Dy3+ (SAO1) and Sr4Al14O25: Eu+2, Dy+3 (SAO2)] with maleic anhydride grafted PP compatibilizer (PRIEX) were prepared, and their auto-glowing properties were examined. After UV excitation at 320 nm, the PP/5PRIEX/SAO1 composites showed green emission at 520 nm, and blue emission was observed for PP/5PRIEX/SAO2 around 495 nm. The intensity of phosphorescence emission and phosphorescence decay was found to be proportional to the filler content (SAO1 and SAO2). The FTIR analysis excluded the copolymerization reaction between the SAO1 and SAO2 fillers and the PP matrix during the high-temperature melt mixing process. The SAO1 and SAO2 fillers decreased the overall crystallinity of the composites without affecting the Tm and Tc (melting and crystallization temperature) values. The thermal stability of the composites was slightly improved with the SAO1 and SAO2 fillers, as seen from the TGA curve. Due to the plasticizing effect of the compatibilizer and the agglomeration of the SAO1 and SAO2 fillers, the tensile modulus, tensile strength, and storage modulus of the composites was found to be decreased with an increase in the SAO1 and SAO2 content. The decreasing effect was more pronounced, especially with the bulk-sized SAO2 filler.

Long Persistent Luminescent HDPE Composites with Strontium Aluminate and Their Phosphorescence, Thermal, Mechanical, and Rheological Characteristics.

In this work, HDPE/strontium aluminate-based auto glowing composites (SrAl2O4: Eu, Dy (AG1) and Sr4Al14O25: Eu, Dy (AG2)) were prepared, and their phosphorescence studies were conducted. In HDPE/AG1 composites, the green emission was observed at ~500 nm after the UV excitation at 320 nm. The HDPE/AG2 has a blue emission at ~490 nm and, in both cases, the intensity of emission is proportional to the AG1 and AG2 content. The DSC data show that the total crystallinity of both the composites was decreased but with a more decreasing effect with the bulky AG2 filler. The melting and crystallization temperatures were intact, which shows the absence of any chemical modification during high shear and temperature processing. This observation is further supported by the ATR-FTIR studies where no new peaks appeared or disappeared from the HDPE peaks. The tensile strength and modulus of HDPE, HDPE/AG1, and HDPE/AG2 composites were improved with the AG1 and AG2 fillers. The rheological studies show the improvement in the complex viscosity and accordingly the storage modulus of the studied phosphorescent HDPE composites. The SEM images indicate better filler dispersion and filler-matrix adhesion, which improves the mechanical characteristics of the studied HDPE composites. The ageing studies in the glowing composites show that there is a decrease in the intensity of phosphorescence emission on exposure to drastic atmospheric conditions for a longer period and the composites become more brittle.

Engineered biochar from wood apple shell waste for high-efficient removal of toxic phenolic compounds in wastewater.

This study investigated a novel agricultural low-cost bio-waste biochar derived from wood apple fruit shell waste via the pyrolysis method, which is modified by ball milling and utilized to remove toxic phenol and chlorophenols (4-CPh and 2,4-DCPh) from contaminated aqueous media. The ball-milled wood apple fruit shell waste biochar (WAS-BC) sorbent was systematically analyzed by BET, CHN, and FTIR as well as particle size, SEM-EDS, XPS and TGA studies. The sorption equilibrium and kinetic studies exhibit that the sorption capacity was greater than 75% within the first 45 min of agitation at pH 6.0. The uptake capacity of 2,4-DCPh onto WAS-BC was greater than those of 4-CPh and phenol. Equilibrium results were consistent with the Langmuir isotherm model, while the kinetic data were best represented by the Elovich and pseudo-second-order model. The maximum uptake of phenol, 4-CPh, and 2,4-DCPh was 102.71, 172.24, and 226.55 mg/g, respectively, at 30 ± 1 °C. Thus, this study demonstrates that WAS-BC is an efficient, low-cost sorbent that can be used for the elimination of phenol and chlorophenol compounds from polluted wastewater.

In situ microwave-assisted solvothermal synthesis via morphological transformation of ZnCo2O4 3D nanoflowers and nanopetals to 1D nanowires for hybrid supercapacitors.

Over recent decades, the conversion of energy and its storage have been in the lime light due to the depletion of fossil resources. The electrochemical energy storage devices like supercapacitors and batteries, and their materials and fabrication methods have been extensively evaluated, which is the best solution for the energy crisis. Herein, zinc cobaltite (ZnCo2O4; ZCO) nanostructures grown on nickel (Ni) foam by microwave-assisted solvothermal fabrication for hybrid supercapacitors are reported. Two different structures/samples, ZCO-15/Ni (nanoflowers) and ZCO-30/Ni (nanowires), were obtained by simply adjusting the reaction time. The electrochemical and physicochemical properties of the as-prepared samples were systematically determined. Particularly, ZCO-15/Ni exhibits excellent structural stability due to its dual morphologies: nanoflowers and nanopetals, and exhibits a large electroactive surface area (25.61 m2 g-1), pore diameter (48.38 nm), and robust adhesion to Ni foam, enabling ion and electron transport. ZCO-15/Ni foam electrode delivers an excellent specific capacity of 650.27 C g-1 at 0.5 A g-1 and admirable cyclic performance of 91% capacitance retention after 5000 cycles compared to ZCO-30/Ni electrode. The excellent electrochemical performance of ZCO makes them promising electrode materials for batteries, hybrid supercapacitors, and other alternative energy storage applications.

Deagglomeration of Ultrafine Hydrophilic Nanopowder Using Low-Frequency Pulsed Fluidization.

Low-frequency flow pulsations were utilized to improve the hydrodynamics of the fluidized bed of hydrophilic ultrafine nanosilica powder with strong agglomeration behavior. A gradual fluidization of unassisted fluidized bed through stepwise velocity change was carried out over a wide range of velocities followed by a gradual defluidization process. Bed dynamics in different regions of the fluidized bed were carefully monitored using fast and sensitive pressure transducers. Next, 0.05-Hz square-wave flow pulsation was introduced, and the fluidization behavior of the pulsed fluidized bed was rigorously characterized to delineate its effect on the bed hydrodynamics by comparing it with one of the unassisted fluidized bed. Flow pulsations caused a substantial decrease in minimum fluidization velocity and effective agglomerate diameter. The frequencies and amplitudes of various events in different fluidized bed regions were determined by performing frequency domain analysis on real-time bed transient data. The pulsations and their effects promoted deagglomeration and improved homogeneity of the pulsed fluidized bed.

Novel nanohydrogel based on itaconic acid grafted tragacanth gum for controlled release of ampicillin.

Nanohydrogel of tragacanth gum using microwave radiations is used for the controlled release of ampicillin. Tragacanth gum was grafted with itaconic acid, employing graft copolymerization in the presence of N, N1-methylene-bis-acrylamide (MBA) as cross linker, and potassium persulphate as initiator. The prepared nanohydrogel was characterized using FTIR, XRD, SEM, and TEM. Besides, the hydrogel was evaluated for in vitro drug release in distilled water and different pH values, and antimicrobial efficacy against E. Coli by well diffusion assay. In vitro drug release studies, at different pH values (2.2, 5.4 and 9.4), and distilled water, pH 2.2 was considered as the optimized pH for maximum drug release. Finally, through antimicrobial efficacy studies against E. Coli, it was observed that ampicillin loaded nanohydrogel, was more efficient in comparison to that of plain ampicillin drug.

Adsorptive removal of phenolic compounds from aqueous solutions using pine cone biomass: kinetics and equilibrium studies.

In this study, a novel inexpensive biosorbent of pine cone powder was used for the treatment of wastewater contaminated with phenol and chlorophenols (CPhs). The biosorbent was thoroughly characterized by using CHN and BET measurements, as well as FTIR, SEM, and XRD analyses. Kinetic and equilibrium biosorption experiments showed that the uptake was more than 80% within the first 30 min of contact time at pH 5.0. The biosorption of 4-CPh onto pine cone powder was higher than those of phenol and 2-CPh. The kinetic data were consistent with the pseudo-first-order kinetic model, and the Langmuir isotherm model best represented the equilibrium data. The maximum biosorption capacities of phenol, 2-CPh, and 4-CPh were 164.51, 189.44, and 220.12 mg/g, respectively, at 30 ± 1 °C. Therefore, the pine cone powder is an effective low-cost adsorbent for the removal of phenol and CPhs from the contaminated water.

Dependency of Anion and Chain Length of Imidazolium Based Ionic Liquid on Micellization of the Block Copolymer F127 in Aqueous Solution: An Experimental Deep Insight.

The non-ionic triblock copolymer, Pluronic® F127, has been selected to observe its interaction with ionic liquids (ILs) in aqueous solutions by using DLS, surface tension, and viscosity measurements. The Critical Micelle Concentration (CMC) of F127 increased with the addition of ILs, which appeared logical since it increases the solubility of PPO (and PEO) moiety, making it behaves more like a hydrophilic block copolymer that is micellized at a higher copolymer concentration. The results from DLS data showed good agreement with those obtained from the surface tension measurements. Upon the addition of ILs, the tendency in micellar size reduction was demonstrated by viscosity results, and therefore, intrinsic viscosity decreased compared to pure F127 in aqueous solution. The results were discussed as a function of alkyl chain length and anions of imidazolium based ILs.

Column dynamic studies and breakthrough curve analysis for Cd(II) and Cu(II) ions adsorption onto palm oil boiler mill fly ash (POFA).

This paper investigates the adsorption characteristics of palm oil boiler mill fly ash (POFA) derived from an agricultural waste material in removing Cd(II) and Cu(II) from aqueous solution via column studies. The performance of the study is described through the breakthrough curves concept under relevant operating conditions such as column bed depths (1, 1.5, and 2 cm) and influent metal concentrations (5, 10, and 20 mg/L). The Cd(II) and Cu(II) uptake mechanism is particularly bed depth- and concentration-dependant, favoring higher bed depth and lower influent metal concentration. The highest bed capacity of 34.91 mg Cd(II)/g and 21.93 mg Cu(II)/g of POFA was achieved at 20 mg/L of influent metal concentrations, column bed depth of 2 cm, and flow rate of 5 mL/min. The whole breakthrough curve simulation for both metal ions were best described using the Thomas and Yoon­Nelson models, but it is apparent that the initial region of the breakthrough for Cd(II) was better described using the BDST model. The results illustrate that POFA could be utilized effectively for the removal of Cd(II) and Cu(II) ions from aqueous solution in a fixed-bed column system.

Equilibrium and kinetic studies on biosorption of 2,4,6-trichlorophenol from aqueous solutions by Acacia leucocephala bark.

Biosorption of 2,4,6-trichlorophenol (2,4,6-TCP) from aqueous solution by biomass prepared from Acacia leucocephala bark, an agricultural solid waste has been investigated in the present study. All the experiments are carried out by batch mode technique. The resulting biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) techniques. The effect of experimental parameters such as contact time, effect of pH (2-10), initial concentration of adsorbate (50-200 mg L(-1)) and amount of biosorbent dosage was evaluated. The removal was found to be pH dependent, and maximum removal was found to be at pH 5.0. The equilibrium time was found to be 3h. The biosorbent dose was increased, and the percentage removal of 2,4,6-TCP was increased, while the adsorption capacity at equilibrium q(e) (mg g(-1)) (amount of 2,4,6-TCP loaded per unit weight of adsorbent) decreased. Biosorption kinetic and isotherm studies showed the pseudo-second-order kinetics with a good correlation coefficient (R(2)=0.999), and both Langmuir and Freundlich isotherms were the best choices to describe the adsorption behaviors. The maximum monolayer biosorption capacity of A. leucocephala bark for 2,4,6-TCP was found to be 256.4 mg g(-1), at 30±1°C according to Langmuir model. This study demonstrated for the first time that the A. leucocephala bark could be an alternative for more costly adsorbents used for removal of 2,4,6-TCP from aqueous media.