Assessment of Outcome of Oral Supplementation of Vitamin D3 as an Adjunct to Scaling and Root Planing in Chronic Periodontitis Patients with Type II Diabetes Mellitus - A Randomized Controlled Clinical Trial.

Background: Both diabetes and periodontitis affect millions of people worldwide and Vitamin D insufficiency may create a conducive environment for the progression of diabetes and periodontal disease. The aim of the study was to assess the outcome of oral supplementation of Vitamin D3 in patients with Type 2Diabetes Mellitus with generalized chronic periodontitis, as an adjuvant toscaling and root planing. Methodology: A total of 92 patients, including 46 each in non-diabetic and diabetec group. Clinical parameters including Plaque Index (PI), Gingival Bleeding Index (GBI), Probing Pocket Depth (PPD), Clinical Attachment Level (CAL), levels of Vitamin D in serum, and Fasting Blood sugar were assessed at the baseline. SRP was finished for each participant in the trial. Following SRP, the first 25people in each group got 60,000 IU of oral vitamin D3 granules once a week for eight weeks, while the remaining 21 subjects from each group did not. At the conclusion of the 8th week following interventions, all the indicators were reviewed. Results: Following SRP and Vitamin D supplementation there was a measurably critical reduction in every one of the periodontal clinical indicators in both groups. In both groups, there was a statistically significant rise in serum vitamin D levels. Conclusion: In addition to SRP, vitamin D supplementation shows promise as a host immunomodulatory drug in the management of periodontitis, particularly in patients with diabetes mellitus.

Management of Sunken Cheeks With Magnet-Retained Cheek Plumpers.

The loss of teeth, associated with sunken lips and cheeks, has a debilitating psychological effect on a person. It is essential for clinicians to incorporate facial esthetics into their treatment plan for complete denture patients in order to improve the patients' confidence and quality of life. Cheek plumpers ensure adequate support to facial muscles, which, in turn, minimizes the appearance of wrinkles, lines, and sagging over time. This case report describes the fabrication of detachable cheek plumpers using magnets to enhance the facial esthetics of a completely edentulous patient. Magnet-retained cheek plumpers, being small and lightweight, allow ease of placement and cleaning without the addition of weight to the prosthesis.

Sectional Impression Tray With Reusable Handle: A Single Solution for All Microstomia Cases.

A dimensionally accurate impression is one of the primary determinants for the precise fabrication of complete denture prostheses in microstomia patients. This can be achieved with the help of sectional trays. This technical report describes the fabrication of a sectional impression tray with a reusable sectional handle using magnets. The handles can be sterilized and reused, thus saving clinical time for future use. The proposed method provides ease of reassembling and disassembling, easy placement, and guided orientation of the two tray segments.

Cylindrical Implant Versus Tapered Implant: A Comparative Study.

AIMS AND OBJECTIVES: The aim of this study is to compare the efficacy of tapered implants with cylindrical implants by evaluating the implant stability using the Osstell implant stability quotient (ISQ) instrument (W&H Dental India PVT Ltd., Bangalore, India) postoperative pain using the visual analog scale (VAS) score, and the peri-implant health using implant mobility scale. MATERIALS AND METHODS: This study included 30 patients who were partially edentulous with single or bilateral missing teeth and received 30 tapered implants on the one side and 30 cylindrical implants on the other side. Implant stability, postoperative pain, and peri-implant health were evaluated. RESULTS: In the evaluation of 30 tapered implants and 30 cylindrical implants, the implant stability quotient (ISQ) value for the tapered implants was higher when compared to that of cylindrical implants, and the group that received tapered implants had the least pain and good peri-implant health than the group that received cylindrical implants. CONCLUSION: On the basis of our clinical findings, it can be concluded that tapered implants provide greater primary stability than cylindrical implants. With the popularity of loading protocols in implant dentistry, the implant surgeon can increase predictability and success by selecting a tapered implant.

Massage Therapy to Control Anxiety Before Extraction of an Impacted Tooth.

Anxiety creates a stressful situation for the dentist as well as the patient. This article describes a simple technique to manage anxiety using an eye massager. The audio and visual distraction technique helps the patient relax and complete the procedure. This article also stresses some basic skills like good communication skills and establishing mutually trustworthy dentist-patient relationships to enhance patient satisfaction during treatment. Managing anxiety during dental visits will help improve oral health in the long term.

A Simple Denture-Marking Technique for Patients Residing at Old Age Homes.

Denture marking helps to identify unknown individuals in social and forensic scenarios. This article describes a simple technique of incorporating a patient's photograph with details in the patient's denture. The photographic marker will help in quick identification in old age homes as it is easily readable by a layperson, playing an important role in day-to-day identification. This technique can be used to label both new and existing dentures that are not marked. The simple technique will ensure positive identification of denture wearers.

Customized Pen for Patients With Arthritis.

Patients with arthritis present with pain, stiffness and limited movement of fingers and hands. Performing tasks independently lead to a lot of anxiety and emotional trauma. Holding simple things like a toothbrush or pen is a cumbersome task. This article describes a simple technique to customize a pen for arthritis patients. The pen holder is customized to the patient's fingers making it easier to write.

A Simple Technique to Manage Anxiety During Tooth Extraction.

Pain-free dental treatment is important for reducing anxiety, treatment completion, and enhancing acceptance of future dental treatment. Injectable local anesthesia assists this pain-free approach but can cause anxiety in few patients. Achieving proper anesthesia is important to complete the procedure successfully, thereby adding to patient's care and comfort. This article describes a simple technique to manage dental anxiety using virtual reality headset. Audio visual aid helped the patient to relax and eliminate the phobia of local anesthesia injection during surgical tooth extraction. The simple technique enhanced the patient's ability to continue the dental procedure.

Custom Sectional Impression Tray With Sectional Handle for Microstomia Patients.

Microstomia presents a unique challenge to the dentist as well as the patient. Microstomia patients often face difficulty in inserting or removing removable dental prostheses due to constricted opening of the oral cavity. Dentists often face difficulty in inserting impression trays in these patients because of the limited mouth opening. Standard impression procedures need to be modified in such patients. This article describes a simple design for the fabrication of a sectional handle for a definitive impression in microstomia patients. The sectional handle could be sterilized and reused.

Individually Modeled 3D Printed Toothbrush and Interproximal Brush Handle With Name for Patients With Limited Manual Dexterity.

Maintenance of proper oral hygiene is a cumbersome task when hand and finger movement is restricted. The customized handle allows better grip on the toothbrush, making it easier to brush teeth or dentures. This increases self-esteem by reducing their dependency on others. This article describes a method of fabricating a 3D printed two-in-one customized handle for a patient with limited manual dexterity. The 3D printed handle is simple and requires less fabrication time than other methods. The customized handle is strong, durable, and resistant to water absorption. It also allows reuse with a new brush design, thus saving additional time and cost. In addition, using a customized toothbrush handle is more effective in oral plaque control than a standard toothbrush.

Comparative Analysis of Intravenous Midazolam with Nasal Spray for Conscious Sedation in Minor Oral and Maxillofacial Surgeries.

AIM: The aim of the current study was to evaluate the efficacy of nasal spray midazolam by collating it with conventional intravenous midazolam for conscious sedation in minor oral surgeries. MATERIALS AND METHODS: Sixty patients were selected randomly and divided into two groups: group A for intranasal midazolam atomized spray (n = 30) and group B for intravenous midazolam (n = 30). Physiological parameters, anxiety score, sedation rating, patient's cooperation score, and retrograde and anterograde amnesia were recorded for each patient during preoperative, intraoperative, and postoperative period. Final evaluation of safety and efficacy in the nasal and intravenous routes of midazolam drug during minor oral surgery was compared. RESULTS: In this study, both intranasal and intravenous groups showed decrease in systolic blood pressure and diastolic blood pressure intraoperatively but within physiological limits and increase in the average pulse rates in both the groups. The average oxygen saturation levels were maintained to normal range in both the groups. The average respiratory rate decreased in both intranasal and intravenous groups during surgical procedure. The preoperative to postoperative anxiety scores were decreased significantly in the both groups and there was no significant difference in pre- to postoperative anxiety scores between the groups. CONCLUSION: Both intravenous and intranasal administration of midazolam showed better patient cooperation, satisfaction, and clinical effectiveness. Intranasal midazolam spray is effective in the reduction of subjective stress, reliable anxiolysis while preserving protective reflexes.

Evaluation of Vertical Bone Gain Following Alveolar Distraction Osteogenesis in the Anterior Edentulous Mandible: A Clinical Study.

AIM AND OBJECTIVES: To calculate the gain in bony height and volume of the distracted upper segment using an extraosseous unidirectional device to improve the retention of the future prosthesis. MATERIALS AND METHODS: Ten cases with completely or partially edentulous but severely or considerably resorbed anterior mandibles were managed by vertical alveolar distraction osteogenesis. All the patients were evaluated preoperatively, intraoperatively and post-operatively for various parameters clinically and radiographically i.e. on OPG, lateral cephalogram and on CT scan, at different time intervals. In all cases there was increase in vertical bone height. RESULTS: The study showed mean vertical bone gain (VBG) on OPG as 8.2 mm. The mean VBG on lateral cephalogram was 8.1 mm. The mean VBG on CT scan at right canine was 8.35 mm, at left canine was 8.2 mm and at midline was 8.27 mm. CONCLUSION: Alveolar distraction osteogenesis is a predictable method for restoring alveolar ridges prior to implant placement or prosthesis. Distraction osteogenesis is ideally suited for recreating missing tissue in the anterior esthetic zone by increasing vertical bone height as well as good width and soft tissue growth.

Achieving the prediction results by visualized treatment objective following anterior maxillary segmental osteotomy. A retrospective study.

This study used the manual visualized treatment objectives (VTO) as a tool to evaluate the predictive value of the computer-assisted VTO. Presurgical cephalometric tracing predictions generated by oral and maxillofacial surgeons and computer-assisted VTOs were compared with the postsurgical outcome as seen on lateral cephalometric tracings. Ten measurements of the predicted and actual postsurgical hard tissue landmarks were compared statistically. A paired Student's t test showed that in nine of ten measurements, there were no statistically significant differences in the mean values of manual VTO (MVTO). Statistically significant differences were found in one of the four linear measurements (cant of upper lip P - 0.0001). For computer assisted (CAVTO) Student's t test showed that in nine of ten measurements, there were no statistically significant differences in the mean values. Statistically significant differences were found in one of the four linear measurements (nasolabial angle, P  - 0.0001). From these data, it appears that both VTOs demonstrated good predictive comparative outcome, and are equally predictive, but CAVTO is precise.