Foraminifera assemblages from Fantangisña serpentinite mud seamount in the NW Pacific Ocean during the Pleistocene (IODP Expedition 366).

The Mariana forearc system, in the northwestern Pacific, is known as the only convergent margin setting with currently active serpentine mud volcanism. The Fantangisña serpentinite mud volcano lies 62 km west of the Mariana trench, within the influence of the North Equatorial Current (NEC). Cores recovered by International Ocean Discovery Program (IODP) Expedition 366 contain pelagic sediments overlying layered serpentinite mud deposits. At the bottom of the sequence, nannofossil-rich forearc deposits were recovered from under the seamount edifice. In this study, we investigated 47 samples from Site U1498A on the southern flank of the seamount for benthic and planktonic foraminifera assemblages. Statistical analyses on planktonic assemblages differentiated two sample groups related to the ratio between thermocline/mixed layer taxa, which indicate fluctuations in the depth of the thermocline (DOT) during the Pleistocene. Variations in the DOT reflect changes in the intensity of the NEC associated with El Niño/La Niña conditions. Mudflows do not influence the ecology of planktonic foraminifera but possibly enhance their preservation against dissolution, which was instead detected in the pelagic deposit as suggested by common Globigerinoides conglobatus. Benthic foraminifers were rare in serpentinite mud deposits as they are severely affected by mudflows. Conversely, they showed high diversity pre-/post-mud-volcanism, and indicate oligotrophic bottom-water conditions.

Mariana serpentinite mud volcanism exhumes subducted seamount materials: implications for the origin of life.

The subduction of seamounts and ridge features at convergent plate boundaries plays an important role in the deformation of the overriding plate and influences geochemical cycling and associated biological processes. Active serpentinization of forearc mantle and serpentinite mud volcanism on the Mariana forearc (between the trench and active volcanic arc) provides windows on subduction processes.  Here, we present (1) the first observation of an extensive exposure of an undeformed Cretaceous seamount currently being subducted at the Mariana Trench inner slope; (2) vertical deformation of the forearc region related to subduction of Pacific Plate seamounts and thickened crust; (3) recovered Ocean Drilling Program and International Ocean Discovery Program cores of serpentinite mudflows that confirm exhumation of various Pacific Plate lithologies, including subducted reef limestone; (4) petrologic, geochemical and paleontological data from the cores that show that Pacific Plate seamount exhumation covers greater spatial and temporal extents; (5) the inference that microbial communities associated with serpentinite mud volcanism may also be exhumed from the subducted plate seafloor and/or seamounts; and (6) the implications for effects of these processes with regard to evolution of life. This article is part of a discussion meeting issue 'Serpentine in the Earth system'.

Magmatic Response to Subduction Initiation: Part 1. Fore-arc Basalts of the Izu-Bonin Arc From IODP Expedition 352.

The Izu-Bonin-Mariana (IBM) fore arc preserves igneous rock assemblages that formed during subduction initiation circa 52 Ma. International Ocean Discovery Program (IODP) Expedition 352 cored four sites in the fore arc near the Ogasawara Plateau in order to document the magmatic response to subduction initiation and the physical, petrologic, and chemical stratigraphy of a nascent subduction zone. Two of these sites (U1440 and U1441) are underlain by fore-arc basalt (FAB). FABs have mid-ocean ridge basalt (MORB)-like compositions, however, FAB are consistently lower in the high-field strength elements (TiO2, P2O5, Zr) and Ni compared to MORB, with Na2O at the low end of the MORB field and FeO* at the high end. Almost all FABs are light rare earth element depleted, with low total REE, and have low ratios of highly incompatible to less incompatible elements (Ti/V, Zr/Y, Ce/Yb, and Zr/Sm) relative to MORB. Chemostratigraphic trends in Hole U1440B are consistent with the uppermost lavas forming off axis, whereas the lower lavas formed beneath a spreading center axis. Axial magma of U1440B becomes more fractionated upsection; overlying off-axis magmas return to more primitive compositions. Melt models require a two-stage process, with early garnet field melts extracted prior to later spinel field melts, with up to 23% melting to form the most depleted compositions. Mantle equilibration temperatures are higher than normal MORB (1,400 °C-1,480 °C) at relatively low pressures (1-2 GPa), which may reflect an influence of the Manus plume during subduction initiation. Our data support previous models of FAB origin by decompression melting but imply a source more depleted than normal MORB source mantle.

The Origin of Carbonate Veins Within the Sedimentary Cover and Igneous Rocks of the Cocos Ridge: Results From IODP Hole U1414A.

Carbonate veins in the igneous basement and in the lithified sedimentary cover of the Cocos Ridge at International Ocean Discovery Program (IODP) Hole 344-U1414A reveal the hydrologic system and fluid-rock interactions. IODP Hole 344-U1414A was drilled on the northern flank of the Cocos Ridge and is situated 1 km seaward from the Middle America Trench offshore Costa Rica. Isotopic and elemental compositions were analyzed to constrain the fluid source of the carbonate veins and to reveal the thermal history of Hole 344-U1414A. The formation temperatures (oxygen isotope thermometer) of the carbonate veins in the lithified sedimentary rocks range from 70 to 92 °C and in the basalt from 32 to 82 °C. 87Sr/86Sr ratios of the veins in the altered Cocos Ridge basalt range between 0.707307 and 0.708729. The higher ratios are similar to seawater strontium ratios in the Neogene. 87Sr/86Sr ratios lower 0.7084 indicate exchange of Sr with the igneous host rock. The calcite veins hosted by the sedimentary rocks are showing more primitive 87Sr/86Sr ratios <0.706396. The isotopic compositions indicate seawater, modified into a hydrothermal fluid by subsequent heating, as the main fluid source. Low-temperature alteration and the presence of a high-temperature fluid resulted in different carbonate precipitates forming up to several cm thick veins. The geochemical data combined with age data of the sedimentary rocks suggest intraplate seamount volcanism in the area between the Galapagos hot spot and the Cocos Island as an additional heating source, after the formation of the Cocos Ridge at the Galapagos hot spot.

Microstructural analysis and calcite piezometry on hydrothermal veins: Insights into the deformation history of the Cocos Plate at Site U1414 (IODP Expedition 344).

In this study we present microstructural data from hydrothermal veins in the sedimentary cover and the igneous basement recovered from Hole U1414A, Integrated Ocean Drilling Program (IODP) Expedition 344 (Costa Rica Seismogenesis Project), to constrain deformation mechanism operating in the subducting Cocos Plate. Cathodoluminescence studies, mechanical e-twin piezometry and electron backscatter diffraction (EBSD) analyses of carbonate veins were used to give insights into the deformation conditions and to help to understand the tectonic deformation history of the Cocos Plate offshore Costa Rica. Analyses of microstructures in the sedimentary rocks and in the basalt of the igneous basement reveal brittle deformation, as well as crystal-plastic deformation of the host rock and the vein material. Cathodoluminescence images showed that in the basalt fluid flow and related precipitation occurred over several episodes. The differential stresses, obtained from two different piezometers using the same parameter (twin density), indicate various mean differential stresses of 49 ± 11 and 69 ± 30 MPa and EBSD mapping of calcite veins reveals low-angle subgrain boundaries. Deformation temperatures are restricted to the range from 170°C to 220°C, due to the characteristics of the existing twins and the lack of high-temperature intracrystalline deformation mechanisms (>220°C). The obtained results suggest that deformation occurred over a period associated with changes of ambient temperatures, occurrence of fluids and hydrofracturing, induced differential stresses due to the bending of the plate at the trench, and related seismic activity.

Fluid inclusion petrology and microthermometry of the Cocos Ridge hydrothermal system, IODP Expedition 344 (CRISP 2), Site U1414.

In this study, we present new data from microthermometry of fluid inclusions entrapped in hydrothermal veins along the Cocos Ridge from the IODP Expedition 344 Site U1414. The results of our study concern a primary task of IODP Expedition 344 to evaluate fluid/rock interaction linked with the tectonic evolution of the incoming Cocos Plate from the Early Miocene up to recent times. Aqueous, low saline fluids are concentrated within veins from both the Cocos Ridge basalt and the overlying lithified sediments of Unit III. Mineralization and crosscutting relationships give constraints for different vein generations. Isochores from primary, reequilibrated, and secondary fluid inclusions crossed with litho/hydrostatic pressures indicate an anticlockwise PT evolution during vein precipitation and modification by isobaric heating and subsequent cooling at pressures between ∼210 and 350 bar. Internal over and underpressures in the inclusions enabled decrepitation and reequilibration of early inclusions but also modification of vein generations in the Cocos Ridge basalt and in the lithified sediments. We propose that lithification of the sediments was accompanied with a first stage of vein development (VU1 and VC1) that resulted from Galapagos hotspot activity in the Middle Miocene. Heat advection, either related to the Cocos-Nazca spreading center or to hotspot activity closer to the Middle America Trench, led to subsequent vein modification (VC2, VU2/3) related to isobaric heating. The latest mineralization (VC3, VU3) within aragonite and calcite veins and some vesicles of the Cocos Ridge basalt occurred during crustal cooling up to recent times. Fluid inclusion analyses and published isotope data show evidence for communication with deeper sourced, high-temperature hydrothermal fluids within the Cocos Plate. The fluid source of the hydrothermal veins reflects aqueous low saline pore water mixed with invaded seawater.