Selective electrochemical CO2 conversion with a hybrid polyoxometalate.

A multi-component coordination compound, in which ruthenium antenna complexes are connected to a polyoxotungstate core is presented. This hybrid cluster effectively promotes the electrochemical conversion of CO2 to C1 feedstocks, the selectivity of which can be controlled by the acidity of the media.

Beyond the Conventional Limitation of Photocycloaddition Reaction in the Roomy Nanospace of a Metal-Organic Framework.

Topochemical reactions provide selective products based on the molecular position; however, they generally require molecules to be placed in strictly limited orientations and distances, making them less versatile. In this study, we found that by confining trans-4-styrylpyridine (4-spy) as a reactive substrate in a flexible metal-organic framework (MOF) nanospace, [2+2] cycloadducts can be selectively obtained, even when the distance between two C═C bonds of 4-spy in the crystal is 5.9 Å, which is much larger than the conventionally observed upper limit (4.2 Å). Such an unusual cyclization reaction is suggested to occur due to the transient proximity of the 4-spy due to the "swing" motion in the nanospace. The MOF nanospace, with its high degree of molecular structural freedom, can be applied to different platforms that do not require the fine constraints of reactive distances for solid-phase reactions.

Creation of single molecular conjugates of metal-organic cages and DNA.

Here we report the development of an equimolar conjugate of a metal-organic cage (MOC) and DNA (MOC-DNA). Several MOC-DNA conjugates were assembled into a programmed structure by coordinating with a template DNA having a complementary base sequence. Moreover, conjugation with the MOC drastically enhanced the permeability of DNA through the lipid bilayer, presenting great potential as a drug delivery system.

Covalent organic framework atropisomers with multiple gas-triggered structural flexibilities.

Covalent organic frameworks (COFs) are emerging crystalline porous polymers, showing great potential for applications but lacking gas-triggered flexibility. Atropisomerism was experimentally discovered in 1922 but has rarely been found in crystals with infinite framework structures. Here we report atropisomerism in COF single crystals. The obtained COF atropisomers, namely COF-320 and COF-320-A, have identical chemical and interpenetrated structures but differ in the spatial arrangement of repeating units. In contrast to the rigid COF-320 structure, its atropisomer (COF-320-A) exhibits unconventional gas sorption behaviours with one or more sorption steps in isotherms at different temperatures. Single-crystal structures determined from continuous rotation electron diffraction and in situ powder X-ray diffraction demonstrate that these adsorption steps originate from internal pore expansion with or without changing the crystal space group. COF-320-A recognizes different gases by expanding its internal pores continuously (crystal-to-amorphous transition) or discontinuously (crystal-to-crystal transition) or having mixed transition styles, distinguishing COF-320-A from existing soft/flexible porous crystals. These findings extend atropisomerism from molecules to crystals and propel COFs into the covalently linked soft porous crystal regime, further advancing applications of soft porous crystals in gas sorption, separation and storage.

Design of a MOF based on octa-nuclear zinc clusters realizing both thermal stability and structural flexibility.

An octa-nuclear zinc (Zn8) cluster-based two-fold interpenetrated metal-organic framework (MOF) of [(CH3)2NH2]2[Zn8O3(FDC)6]·7DMF (denoted as Zn8-as; H2FDC = 9H-fluorene-2,7-dicarboxylic acid; DMF = N,N-dimethylformamide) was synthesized by the reaction of a hard base of a curved dicarboxylate ligand (H2FDC) with the borderline acid of Zn(II) under solvothermal conditions. Zn8-as shows significant crystal volume shrinkage upon heating, yielding a solvate-free framework of [(CH3)2NH2]2[Zn8O3(FDC)6] (Zn8-de). Zn8-de displays gated adsorption for C2H2 and type-I adsorption for CO2, attributed to the framework flexibility and the different interactions between the gas molecules and the host framework.

Stabilization of radical active species in a MOF nanospace to exploit unique reaction pathways.

We synthesized a metal-organic framework (MOF) using a ligand bearing haloalkoxy chains as a radical precursor. The radicals generated in the MOF upon photoirradiation were stable even at 250 K or under an O2 atmosphere, despite radicals generated from the ligand decomposing at 200 K; thus, the regular arrangement of radicals effectively stabilized them. Moreover, a unique photoproduct was obtained only in the MOF, indicating that the confinement effect in the nanospace enabled a specific reaction that did not occur in the bulk state. We propose a new platform for exploring chemical reactions and materials based on reactive species.

Fabrication of a Kagomé-type MOF Membrane by Seeded Growth on Amino-functionalized Porous Al2 O3 Substrate.

In this study, we report an efficient fabrication method for the membrane of a metal-organic framework (MOF) (Kgm-OEt) which is one kind of kagomé-type MOF with a two-dimensional (2D) sheet structure having one-dimensional (1D) channels suitable for separation of H2 from other larger gases. The Kgm-OEt seed layer was created on an Al2 O3 substrate using layer-by-layer (LBL) growth, then a membrane was fabricated by secondary growth. The membrane on a 3-aminopropyltriethoxysilane (APTEs)-treated substrate obtained in this method was continuous and defect-free with the crystal orientation suitable for gas transportation, while the membrane grown on an unmodified substrate was loosely packed with unfavorable crystal orientation.

Triplet Carbene with Highly Enhanced Thermal Stability in the Nanospace of a Metal-Organic Framework.

Triplet carbenes (TCs) are of great interest due to their magnetic properties and reactivity, which descend from TCs' unique electronic state. However, the reactivity and stability of TCs are usually a trade-off, and it is difficult to achieve both at the same time. In this work, we were able to enhance the thermal stability of a TC species while maintaining its reactivity by confining them in the nanospace of a metal-organic framework (MOF). We synthesized a new MOF using a TC precursor; subsequently, TCs were generated by photostimulation. The TCs generated in the MOF nanospace were detectable up to 170 K, whereas their non-MOF-confined counterparts (bare ligand) could not be detected above 100 K. In addition, the reactivity of TC generated in MOF with O2 was drastically improved compared to that of bare ligand. Our approach is generally applicable to the stabilization of highly reactive species, whose reactivity needs to be preserved.

An Open-shell, Luminescent, Two-Dimensional Coordination Polymer with a Honeycomb Lattice and Triangular Organic Radical.

The use of organic radicals as building blocks is an effective approach to the production of open-shell coordination polymers (CPs). Two-dimensional (2D) CPs with honeycomb spin-lattices have attracted attention because of the unique electronic structures and physical properties afforded by their structural topology. However, radical-based CPs with honeycomb spin-lattices tend to have low chemical stability or poor crystallinity, and thus novel systems with high crystallinity and persistence are in strong demand. In this study, a novel triangular organic radical possessing three pyridyl groups, tris(3,5-dichloro-4-pyridyl)methyl radical (trisPyM) was prepared. It exhibits luminescence, high photostability, and a coordination ability, allowing formation of defined and persistent 2D CPs. Optical measurements confirmed the luminescence of trisPyM both in solution and in the solid state, with emission wavelengths, λem, of 665 and 700 nm, respectively. trisPyM exhibits better chemical stability under photoirradiation than other luminescent radicals: the half-life of trisPyM in CH2Cl2 was 10 000 times that of the tris(2,4,6-trichlorophenyl)methyl radical (TTM), a conventional luminescent radical. Complexation between trisPyM and ZnII(hfac)2 yielded a single crystal of a 2D CP trisZn, possessing a honeycomb lattice with graphene-like spin topology. The coordination structure of trisZn is stable under evacuation at 60 °C. Moreover, trisZn exhibits luminescence at 79 K, with λem = 695 nm, and is a rare example of a luminescent material among 2D radical-based CPs. Our results indicate that trisPyM may be a promising building block in the construction of a new class of 2D honeycomb CPs with novel properties, including luminescence.

Molecular motion in the nanospace of MOFs upon gas adsorption investigated by in situ Raman spectroscopy.

Molecular motions taking place in the nanospace of metal-organic frameworks (MOFs) are an interesting research subject, although not yet fully investigated. In this work, we utilized in situ Raman spectroscopy in the ultralow-frequency region to investigate the libration motion (including the rotational motion of phenylene rings) of MOFs, in particular [Cu2(bdc)2(dabco)] (Cu-JAST-1), where bdc = 1,4-benzenedicarboxylate and dabco = 1,4-diazabicyclo[2.2.2]octane. The libration mode of Cu-JAST-1 was found to be significantly suppressed by the adsorption of various guest molecules, such as CO2, Ar, and N2. In addition, an appreciable correlation between the libration mode and adsorption equilibrium time was identified, which provides useful novel tools in the design of MOFs acting as molecular adsorption and separation materials.

Trapping and Releasing of Oxygen in Liquid by Metal-Organic Framework with Light and Heat.

Nanoporous materials can adsorb small molecules into their nanospaces. However, the trapping of light gas molecules dissolved in solvents suffers from low concentration and poor adsorption affinity. Here, the reversible trapping and releasing of dissolved oxygen are shown through integrating photosensitization and chemical capturing abilities into a metal-organic framework (MOF), MOMF-1. 9,10-Di(4-pyridyl)anthracene (dpa) ligands in MOMF-1 generates singlet oxygen from triplet oxygen under photoirradiation without additional photosensitizers, and successively reacts with it to produce anthracene endoperoxide, forming MOMF-2, which is proved crystallographically. The reverse reaction also proceeds quantitatively by heating MOMF-2. Moreover, MOMF-1 exhibits excellent water resistance, and completely removes oxygen of ppm order concentrations in water. The new material shown in this report allows controlling of the amount of dissolved oxygen, which can be applicable in various fields relating to numerous oxidation phenomena.

Hysteresis in the gas sorption isotherms of metal-organic cages accompanied by subtle changes in molecular packing.

Structural deformation in response to gas sorption is rarely observed for porous molecular solids, when compared to porous framework materials. Here, we describe the effect of chemical modification on the exterior of lantern-type metal-organic cages on the emergence and then disappearance of cooperative gas uptake. The results suggest that supramolecular design of ligands can be used to reveal this behaviour.

Direct observation of dimethyl sulfide trapped by MOF proving efficient removal of sulfur impurities.

Here, we report the adsorptive removal of trace amounts of dimethyl sulfide (DMS) using metal-organic frameworks (MOFs). Cu2+-based MOFs with open metal sites (OMSs), [Cu3(btc)2] (HKUST-1), where btc = 1,3,5-benzenetricarboxylate, and without OMSs, [Cu2(bdc)2(dabco)] (Cu-JAST-1), where bdc = 1,4-benzenedicarboxylate and dabco = 1,4-diazabicyclo[2.2.2]octane, were investigated for the removal of DMS to compare their performance with that of Ag-Y zeolite, which is currently widely used in industry. HKUST-1 exhibited a considerably higher adsorption capacity for DMS than the other adsorbents, which was confirmed by breakthrough measurements. The adsorption state of DMS with HKUST-1 was directly revealed by single-crystal X-ray diffraction (SXRD) analysis and in situ Raman spectroscopy. In addition, it was shown that DMS can be removed by HKUST-1 even under humid conditions.

One-Step Synthesis of an Adaptive Nanographene MOF: Adsorbed Gas-Dependent Geometrical Diversity.

A layered metal-organic framework (MOF) comprising extra-large nanographene sheets, HBCMOF, was successfully synthesized using a dicarboxylic acid derivative of hexa-peri-hexabenzocoronene (HBCLH2), and its structure was characterized by single-crystal X-ray diffraction analysis. The crystal structure shows that 2D layers composed of a dinuclear Zn2+ complex unit and HBCL are located on top of each other through multiple weak interlayer bonds, affording HBCMOF, having three dimensionally connected nanopores with large nanographene surfaces. The HBC-based nanographene sheets are anchored to the MOF framework via two zinc carboxylate linkages and therefore have an axial rotational freedom. The sorption isotherms of gaseous molecules such as carbon dioxide and hydrocarbons (acetylene, propane, propylene, benzene, and cyclohexane) on HBCMOF all displayed a hysteretic profile with reversible structural changes, as observed by in situ powder X-ray diffraction studies.

Reversible low-temperature redox activity and selective oxidation catalysis derived from the concerted activation of multiple metal species on Cr and Rh-incorporated ceria catalysts.

The ceria-based catalyst incorporated with Cr and a trace amount of Rh (Cr0.19Rh0.06CeOz) was prepared and the reversible redox performances and oxidation catalysis of CO and alcohol derivatives with O2 at low temperatures (<373 K) were investigated. In situ X-ray absorption fine structure (XAFS), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM)-EDS/EELS and temperature-programmed reduction/oxidation (TPR/TPO) revealed the structures and redox mechanisms of three metals in Cr0.19Rh0.06CeOz: dispersed Rh3+δ species (<1 nm) and Cr6-γO3-x nanoparticles (∼1 nm) supported on CeO2 in Cr0.19Rh0.06CeOz were transformed to Rh nanoclusters, Cr(OH)3 species and CeO2-x with two Ce3+-oxide layers at the surface in a concerted activation manner of the three metal species with H2.

Dynamic Topochemical Reaction Tuned by Guest Molecules in the Nanospace of a Metal-Organic Framework.

Reaction in well-designed solids allows yielding products with high selectivity and unique compounds that cannot be obtained in solution. However, the precise tuning of the arrangement of reactants in solids for the versatile application of solid-phase reactions remains a challenging subject. Here, a [2 + 2] photocyclization reaction at different positions of the carbon-carbon bonds is described in which the spatial arrangement of 4-styrylpyridines (4-spy) is changed by guest molecules in a flexible metal-organic framework. The 4-spy molecules undergo photodimerization between two carbon-carbon double bonds in the guest-free framework, whereas a reaction between olefinic and aromatic carbon-carbon bonds or the absence of reaction takes place in the solvent-incorporated form. This reactivity, which can be termed as "dynamic topochemistry" contributes to enforce the applicability of solid-phase reactions in synthetic chemistry.

Microwave-Assisted Hydrothermal Synthesis of [Al(OH)(1,4-NDC)] Membranes with Superior Separation Performances.

In this study, we report a facile ligand-assisted in situ hydrothermal approach for preparation of compact [Al(OH)(1,4-NDC)] (1,4-NDC=1,4-naphthalenedicarboxylate) MOF membranes on porous γ-Al2 O3 substrates, which also served as the Al3+ source of MOF membranes. Simultaneously, it was observed that the heating mode exerted significant influence on the final microstructure and separation performance of [Al(OH)(1,4-NDC)] membranes. Compared with the conventional hydrothermal method, the employment of microwave heating led to the formation of [Al(OH)(1,4-NDC)] membranes composed of closely packed nanorods with superior H2 /CH4 selectivity.

Design and control of gas diffusion process in a nanoporous soft crystal.

Design of the gas-diffusion process in a porous material is challenging because a contracted pore aperture is a prerequisite, whereas the channel traffic of guest molecules is regulated by the flexible and dynamic motions of nanochannels. Here, we present the rational design of a diffusion-regulatory system in a porous coordination polymer (PCP) in which flip-flop molecular motions within the framework structure provide kinetic gate functions that enable efficient gas separation and storage. The PCP shows substantial temperature-responsive adsorption in which the adsorbate molecules are differentiated by each gate-admission temperature, facilitating kinetics-based gas separations of oxygen/argon and ethylene/ethane with high selectivities of ~350 and ~75, respectively. Additionally, we demonstrate the long-lasting physical encapsulation of ethylene at ambient conditions, owing to strongly impeded diffusion in distinctive nanochannels.

Highly responsive nature of porous coordination polymer surfaces imaged by in situ atomic force microscopy.

The ability of porous coordination polymers to undergo reversible structural transformations in response to the presence of guest molecules has been intensively investigated for applications such as molecular separation, storage, sensing and signalling processes. Here we report on the direct observation of the highly guest-responsive nature of the surface of a single-crystalline porous coordination polymer, which consists of paddlewheel zinc clusters and two types of ligand, by in situ liquid-phase atomic force microscopy. Observations were carried out in solution at constant temperature (28 °C) by high-speed atomic force microscopy with lattice resolution. A sharp and reversible response to the presence or absence of biphenyl guest molecules was observed, under conditions that can scarcely induce the transformation of the bulk crystal. Additionally, by modulating the surface coordination equilibrium, layer-by-layer delamination events were captured in real time at every ~13 s per frame.

Creation of MOFs with open metal sites by partial replacement of metal ions with different coordination numbers.

Herein, we developed isostructural metal-organic frameworks (MOFs) [Cu1-xPdx(SiF6)(bpy)2] (bpy: 4,4'-bipyridine) (SIFSIX-1-CuPd-3, -5 and -10) containing open metal sites using a partial metal-replacement approach. Starting from the SIFSIX-1-Cu-type MOF, some of the Cu2+ ions having octahedral geometry were successfully replaced with Pd2+ ions having square planar geometry in different ratios, while the framework structure was maintained. The results showed that gas adsorption properties of SIFSIX-1-Cu-type MOFs can be tuned via partial metal replacement.