Investigation of mechanism and critical parameters for removal of arsenic from water using Zr-TiO2 composite.

Using the microwave-hydrothermal method for the synthesis of composite, high surface density of hydroxyl groups, as an active adsorption sites for arsenic, was obtained. Adsorption mechanisms of As(III) and As(V) onto zirconium-doped titanium dioxide (Zr-TiO2) were investigated and proposed using macroscopic and microscopic methods. Obtained results are suggesting inner-sphere and outer-sphere adsorption mechanisms for As(III) and As(V), respectively. This allowed us to identify parameters that are critical for the successful removal of arsenic from water, which is essential information for further optimization of the removal process. The composite was further applied for the removal of As(III) and As(V) from water in a dynamic flow through the reactor. Column study proved that the removal of both arsenic species below the value recommended by WHO can be achieved. Elution of As(III) and As(V) from the composite can be done by using small amounts of 0.01 M NaOH solution resulting in preconcentration of arsenic species and possible multiple usage of composite.

A finite element analysis of ferrule design on restoration resistance and distribution of stress within a root.

AIM: To analyse the effect of ferrule height upon the mechanical resistance and stress distribution within a root to explain variations in the pattern of root fracture. METHODOLOGY: An extracted, intact, caries free, maxillary right central incisor was scanned by laser and then reconstructed on a computer to produce a model of the tooth and associated periodontal ligament. A simulated post/core/crown restoration was constructed on conventional tooth preparations with various ferrules. The crown was loaded with a simulated 500 N force and the simulated displacement of components and the tensile and compressive stress within the tooth structure were recorded. RESULTS: Without a ferrule preparation, the simulated crown tilted to the labial and rotated distally. With increasing ferrule height the displacement and rotation of the crown reduced in conventional and crown-lengthening models with maximum reduction occurring when the ferrule height reached 1.5 mm. In ferrule models, higher levels of tensile stress developed in internal (by a factor of 8) and mid-root palatal (by a factor of 90) dentine at the cervical margin of the preparation. With an increase in ferrule height, the area of tensile stress within the palatal mid-dentine expanded towards the cervical margin. Similar patterns and stress values were recorded for the crown-lengthening models. CONCLUSION: The study confirms that a ferrule increases the mechanical resistance of a post/core/crown restoration. However a ferrule creates a larger area of palatal dentine under tensile stress that may be a favourable condition for a crack to develop. Crown-lengthening did not alter the levels or pattern of stress within compared with conventional ferrule preparations.