RESUMO
We report the synthesis of WO3, TiO2, and TiO2-WO3 nanoparticles by a polyol route, with the objective of studying the influence of the preparation method on their photochromic properties. By combining transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and diffuse reflectance experiments, we show that low W6+ concentrations and high ripening temperatures allow the preparation of WO3 nanoparticles with high photochromic efficiency. WO3-TiO2 nanocomposites (NCs) prepared by the introduction of a TiO2+ solution in a WO3 nanoparticle suspension exhibit a strong coloring photochromism, which is attributed to the TiO2 coating of the WO3 nanoparticles as it involves the formation of W-O-Ti oxo-bonds in place of W5+-νO defects. Especially, after an oxidative treatment in order to obtain an initial pale-yellow material, such WO3-TiO2 NCs exhibit a fully reversible photochromism with a large contrast between the colored and bleached state. They could therefore be incorporated in hybrid smart films for solar control on building window glasses. On the other hand, while the WO3-TiO2 NCs are functionalized with DPA (n-dodecyl phosphonic acid), the as-prepared nanocomposites exhibit exacerbated coloring contrast but with a nearly nonreversible photochromism (very limited bleaching), which makes them good candidates for the fabrication of smart UV-sensor devices that can indicate the cumulative UV dose which is received.
RESUMO
Ideal bone tissue engineering is to induce bone regeneration through the synergistic integration of biomaterial scaffolds, bone progenitor cells, and bone-forming factors. Biomimetic scaffolds imitate the native extracellular matrix (ECM) and are often utilized in vitro as analogues of the natural ECM to facilitate investigations of cell-ECM interactions and processes. In vivo, the cellular microenvironment has a crucial impact on regulating cell behavior and functions. A PET surface was activated and then functionalized with mimetic peptides to promote human mesenchymal stem cell (hMSC) adhesion and differentiation into an osteogenic lineage. Spray technology was used to randomly micropattern peptides (RGD and BMP-2 mimetic peptides) on the PET surface. The distribution of the peptides grafted on the surface, the roughness of the surfaces and the chemistry of the surfaces in each step of the treatment were ascertained by atomic force microscopy, fluorescence microscopy, time-of-flight secondary ion mass spectrometry, Toluidine Blue O assay, and X-ray photoelectron spectroscopy. Subsequently, cell lineage differentiation was evaluated by quantifying the expression of immunofluorescence markers: osteoblast markers (Runx-2, OPN) and osteocyte markers (E11, DMP1, and SOST). In this article, we hypothesized that a unique combination of bioactive micro/nanopatterns on a polymer surface improves the rate of morphology change and enhances hMSC differentiation. In DMEM, after 14 days, disordered micropatterned surfaces with RGD and BMP-2 led to a higher osteoblast marker expression than surfaces with a homogeneous dual peptide conjugation. Finally, hMSCs cultured in osteogenic differentiation medium (ODM) showed accelerated cell differentiation. In ODM, our results highlighted the expression of osteocyte markers when hMSCs were seeded on PET surfaces with random micropatterns.
Assuntos
Sinais (Psicologia) , Osteogênese , Humanos , Diferenciação Celular , Osso e Ossos , OligopeptídeosRESUMO
Self-organised helical bilayers of dicationic gemini surfactants confined in helical silica nanospace were transformed in situ to carbon dots (CDots) via pyrolysis. These water-dispersible CDots exhibit electronic absorption spanning the UV and visible range and possess symmetrical circular dichroism (CD) signals, the sign of which depends on the handedness of the helices.
RESUMO
Intermetallics represent an important family of compounds, in which insertion of light elements (H, B, C, N) has been widely explored for decades to synthesize novel phases and promote functional materials such as permanent magnets or magnetocalorics. Fluorine insertion, however, has remained elusive so far since the strong reactivity of this atypical element, the most electronegative one, tends to produce the chemical decomposition of these systems. Here, we introduce a topochemical method to intercalate fluorine atoms into intermetallics, using perfluorocarbon reactant with covalent C-F bonds. We demonstrate the potential of this approach with the synthesis of non-stoichiometric mixed anion (Si-F) LaFeSiFx single-crystals, which are further shown to host FeSi-based superconductivity. Fluorine topochemistry on intermetallics is thus proven to be an effective route to provide functional materials where the coexistence of ionic and metallo-covalent blocks, and their interactions through inductive effects, is at the root of their functional properties.
RESUMO
In order to circumvent the usual nucleation of randomly distributed tiny metallic dots photodeposited on TiO2 nanoparticles (NPs) induced by conventional UV lamps, we propose to synthesize well-controlled nanoheterodimers (NHDs) using lasers focused inside microfluidic reactors to strongly photoactivate redox reactions of active ions flowing along with nanoparticles in water solution. Since the flux of photons issued from a focused laser may be orders of magnitude higher than that reachable with classical lamps, the production of electron-hole pairs is tremendously increased, ensuring a large availability of carriers for the deposition and favoring the growth of a single metallic dot as compared to secondary nucleation events. We show that the growth of single silver or gold nanodots can be controlled by varying the beam intensity, the concentration of the metallic salt, and the flow velocity inside the microreactor. The confrontation to a build-in model of the metallic nanodot light-induced growth onto the surface of TiO2 NPs shows the emergence of a predictable "master behavior" on which individual growths obtained from various tested conditions do collapse. We also characterized the associated quantum yield. Eventually, we successfully confronted our model to growth data from the literature in the case of silver on TiO2 and gold on II-VI semiconducting NPs triggered by UV lamps. It shows that for the photosynthesis of NHDs the efficiency of the electron-hole pair production rate matters much more than the number of pairs produced and that the use of laser light can provide a photodeposition-based synthesis at the nanoscale.
RESUMO
ZnO/MoO3 powder mixture exhibits a huge photochromic effect in comparison with the corresponding single oxides. The coloring efficiency of such combined material after UV-light irradiation was studied in terms of intensity, kinetics, and ZnO/MoO3 powder ratio. Additionally, the incidence of the pretreatment step of the ZnO and MoO3 powders under different atmospheres (air, Ar or Ar/H2 flow) was analyzed. The huge photochromic effect discovered herein was interpreted as the creation of "self-closed Schottky barrier" at the solid/solid interfaces between the two oxides, associated with the full redox reaction which can be pictured by the equation ZnO1-ε + MoO3 â ZnO + MoO3-ε. Remarkable optical contrast between virgin and color states as well as self-bleaching in dark allowing the reversibility of the photochromism is emphasized. From this first discovery, deeper characterization of the self-bleaching process shows that the photochromic mechanism is complex with a bleaching efficiency (possibility to come back to the virgin material optical properties without any deterioration) and a bleaching kinetics, which are both dependent on the coloring irradiation time. This demonstrates that the oxygen exchange through the Schottky interface proceeds in at least two convoluted steps: an anionic surface exchange allowing a reversibility of the redox reaction followed by bulk diffusion of the exchanged anions which are then definitively trapped. An emergent "negative photochromism effect" (i.e., photochromism associated with a self-bleaching instead of a darkening under irradiation) is observed after a long irradiation time.
RESUMO
For many opto-electronic applications, F:SnO2 materials must benefit from high transparency, high conductivity, and high mechanical strength even after quenching. The purpose of this study was to investigate the influence of quenching on the opto-electronic properties of the F:SnO2 layers synthesized at high temperature on Si x C y O-coated soda-lime glass by atmospheric chemical vapor deposition. The morphology, structure, and composition of the layers were studied before and after quenching in air- and oxygen-rich atmospheres at 670 °C. The free carrier concentration was reduced by oxygen vacancy (VO) passivation, as well as by F and Na diffusion, with all effects scaling up with quenching time in air. The transmittance also decreased with quenching time as Na impurities acted as absorption and electron recombination centers. In an oxygen-rich atmosphere, the VO passivation was even more emphasized, with however a moderate contribution to conductivity loss. The F:SnO2 layer microstructure and composition were rather fringed through high-temperature deposition. The almost invariable free carrier concentration and transmittance of the F:SnO2 samples quenched in O2 versus air were related to a moderation in Na diffusion. For long quenching times (>20 min) in air, Na and F diffusion prevailed explaining the conductivity drop.
RESUMO
Novel design of electrochromic devices (ECDs) known for their ability to modify optical properties under an applied voltage, based on a minimization of the number of layers is reported. The use of a metallic electrode, playing the role of both the conductive layer and the counter electrode, allows us to simplify the assembly of a commonly five-layer battery-type device to four-layer ECD. Further minimization of the number of layers is achieved using a conductive and electrochromic material. The novelty of the device configuration is illustrated using poly(3,4-ethylenedioxythiophene) (PEDOT)-based materials as EC layer, lithium-based ionic liquid as electrolyte, and Ag as counter electrode. Such a four- or three-layer ECD deposited on paper substrate switches from light to deep blue in a narrow 0.7 V voltage window. Preliminary investigations of the mechanism indicate traces of Ag on the PEDOT layer upon cycling. Finally, the printed ECD is successfully activated using a mobile phone.
RESUMO
High efficiency and selectivity, easy magnetic recovery and recycling, and use of air as the oxidant at atmospheric pressure are major objectives for oxidation catalysis in terms of sustainable and green processes. A tris(triazolyl) ligand, so far only used in copper-catalyzed alkyne azide cycloadditions, was found to be extremely efficient in SiO2 /γ-Fe2 O3 -immobilized palladium complexes. It was characterized by inductively coupled plasma (ICP) analysis, transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectra (XPS) and found to fulfill the combined conditions for the selective oxidation of alcohols to aldehydes and ketones.
RESUMO
Detailed studies of the electronic states for Mo(0.3)Cu(0.7)Sr(2)ErCu(2)Oy samples with different oxygen contents are presented here. The influence of oxygenation on the electronic states for the Mo(0.3)Cu(0.7)Sr(2)ErCu(2)Oy system from the semiconducting to the superconducting state has been investigated by means of X-ray photoelectron spectroscopy (XPS). The XPS studies show that Mo is in a mixed Mo(V) and Mo(VI) oxidation state and Mo(V) is predominant over the Mo(VI) in the as-prepared (AP) sample. Yet annealing under an oxygen atmosphere enhances the Mo(VI) state. At the same time, a reduction in the copper species is observed. In the Cu 2p spectra, a larger energy separation between the satellite and main peaks (E(S)-E(M)) and a lower intensity ratio (I(S)/I(M)) are found to correlate with higher values of the superconducting transition temperature (T(C)). Analysis of these spectra within the Configuration Interaction (CI) model suggests that higher values of TC are related to lower values of the O 2p-Cu 3d charge transfer energy. The change in the Sr 3d and O 1s core level spectra correlates with the oxygen insertion in the (Mo/Cu)O(1+δ) chain site, after oxygenation. The hole concentration (Ph) in the copper plane has been obtained using the room temperature thermoelectric power (TEP) value; this shows an increasing tendency with increasing T(C), after oxygenation. From these experimental results, one observes that T(C)increases with decreasing charge transfer energy. This is, indeed, opposite to the accepted views and occurs in parallel with the shortening of the apical copper-oxygen distance (Cu(2)-O(2)) and the increasing of the CuO(2) plane buckling angle.
RESUMO
The engineering of novel catalytic nanomaterials that are highly active for crucial carbon-carbon bond formations, easily recoverable many times, and biocompatible is highly desirable in terms of sustainable and green chemistry. To this end, catalysts comprising dendritic "click" ligands that are immobilized on a magnetic nanoparticle (MNP) core, terminated by triethylene glycol (TEG) groups, and incorporate Pd nanoparticles (PdNPs) have been prepared. These nanomaterials are characterized by transmission electron microscopy (TEM), high-resolution TEM, inductively coupled plasma analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectra and energy-dispersive X-ray spectroscopy. They are shown to be highly active, dispersible, and magnetically recoverable many times in Suzuki, Sonogashira, and Heck reactions. In addition, a series of pharmacologically relevant or natural products were successfully synthesized using these magnetic PdNPs as catalyst. For comparison, related PdNP catalysts deposited on MNPs bearing linear "click" PEGylated ligands are also prepared. Strong positive dendritic effects concerning ligand loading, catalyst loading, catalytic activity, and recyclability are observed, that is, the dendritic catalysts are much more efficient than non-dendritic analogues.
RESUMO
Posterior Capsular Opacification (PCO) is the capsule fibrosis developed on implanted IntraOcular Lens (IOL) by the de-differentiation of Lens Epithelial Cells (LECs) undergoing Epithelial Mesenchymal Transition (EMT). Literature has shown that the incidence of PCO is multifactorial including the patient's age or disease, surgical technique, and IOL design and material. Reports comparing hydrophilic and hydrophobic acrylic IOLs have shown that the former has more severe PCO. On the other hand, we have previously demonstrated that the adhesion of LECs is favored on hydrophobic compared to hydrophilic materials. By combining these two facts and contemporary knowledge in PCO development via the EMT pathway, we propose a biomimetically inspired strategy to promote LEC adhesion without de-differentiation to reduce the risk of PCO development. By surface grafting of a cell adhesion molecule (RGD peptide) onto the conventional hydrophilic acrylic IOL material, the surface-functionalized IOL can be used to reconstitute a capsule-LEC-IOL sandwich structure, which has been considered to prevent PCO formation in literature. Our results show that the innovative biomaterial improves LEC adhesion, while also exhibiting similar optical (light transmittance, optical bench) and mechanical (haptic compression force, IOL injection force) properties compared to the starting material. In addition, compared to the hydrophobic IOL material, our bioactive biomaterial exhibits similar abilities in LEC adhesion, morphology maintenance, and EMT biomarker expression, which is the crucial pathway to induce PCO. The in vitro assays suggest that this biomaterial has the potential to reduce the risk factor of PCO development.
Assuntos
Opacificação da Cápsula/patologia , Catarata/terapia , Transição Epitelial-Mesenquimal/efeitos dos fármacos , Lentes Intraoculares/efeitos adversos , Animais , Opacificação da Cápsula/cirurgia , Catarata/patologia , Extração de Catarata/efeitos adversos , Adesão Celular/efeitos dos fármacos , Desdiferenciação Celular/efeitos dos fármacos , Linhagem Celular , Células Epiteliais/efeitos dos fármacos , Células Epiteliais/patologia , Humanos , Próteses e Implantes/efeitos adversos , SuínosRESUMO
Fluorination processes of polymer surfaces are able to lead to drastic modifications of the surface properties without changing the bulk characteristics of the virgin material. In this paper, two types of polymers, i.e. ultrahigh molecular weight polyethylene (UHMWPE) and high density polyethylene (HDPE), are considered. The surface of these materials have been modified using two different fluorination routes, both carried out at room temperature: the direct fluorination with 10% F2 + 90% He gaseous mixtures and the radio-frequency plasma-enhanced fluorination (PEF) using either O2/CF4 mixtures or c-C4F8. The effect of these processes on the surface of the polymer samples are compared using mostly XPS results. The different components of the C1s spectra are assigned in term of CFx bonding, giving valuable information on the surface fluorination rate.
Assuntos
Materiais Biocompatíveis/química , Polietileno/química , Polietilenos/química , Células Cultivadas , Halogenação , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de SuperfícieRESUMO
Original core/corona nanoparticles composed of a maghemite core and a stimuli-responsive polymer coating made of poly(acrylic acid)-block-poly(vinyl alcohol) macromolecules were fabricated for drug delivery system (DDS) application. This kind of DDS aims to combine the advantage of stimuli-responsive polymer coating, in order to regulate the drug release behaviours under different conditions and furthermore, improve the biocompatibility and in vivo circulation half-time of the maghemite nanoparticles. Drug loading capacity was evaluated with methylene blue (MB), a cationic model drug. The triggered release of MB was studied under various stimuli such as pH, ionic strength and temperature. Local heating generated under alternating magnetic field (AMF) application was studied, and remotely AMF-triggered release was also confirmed, while a mild heating-up of the release medium was observed. Furthermore, their potential application as magnetic resonance imaging (MRI) contrast agents was explored via relaxivity measurements and acquisition of T2-weighted images. Preliminary studies on the cytotoxicity against mouse fibroblast-like L929 cell line and also their cellular uptake within human melanoma MEL-5 cell line were carried out. In conclusion, this kind of stimuli-responsive nanoparticles appears to be promising carriers for delivering drugs to some tumour sites or into cellular compartments with an acidic environment.
Assuntos
Compostos Férricos/química , Nanopartículas Metálicas/química , Azul de Metileno/metabolismo , Polímeros/química , Resinas Acrílicas/química , Animais , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Portadores de Fármacos/química , Portadores de Fármacos/farmacologia , Humanos , Concentração de Íons de Hidrogênio , Magnetismo , Azul de Metileno/química , Azul de Metileno/toxicidade , Camundongos , Polímeros/farmacologia , Álcool de Polivinil/químicaRESUMO
Oh my Gold! Gold atoms stabilise catalytically active palladium nanoparticles when engaged in an alloy heterogenised on carbon. The increased durability makes the Pd-Au/C catalyst more recyclable than the gold-free Pd/C catalyst for the Sonogashira reaction.
RESUMO
The present study provides a rapid way to obtain VO2 (B) under economical and environmentally friendly conditions. VO2 (B) is one of the well-known polymorphs of vanadium dioxide and is a promising cathode material for aqueous lithium ion batteries. VO2 (B) was successfully synthesized by rapid single-step hydrothermal process using V2O5 and citric acid as precursors. The present study shows that phase-pure VO2 (B) polytype can be easily obtained at 180 °C for 2 h and 220 °C for 1 h, that is, the lowest combination of temperature and duration reported so far. The obtained VO2 (B) is characterized by X-ray powder diffraction, high-resolution scanning electron microscopy, and Fourier transform infrared spectroscopy. In addition, we present an indirect way to obtain VO2 (M1) by annealing VO2 (B) under vacuum for 1 h.
RESUMO
Microenvironments such as protein composition, physical features, geometry, and elasticity play important roles in stem cell lineage specification. The components of the extracellular matrix are known to subsequently assemble into fibrillar networks in vivo with defined periodicity. However, the effect of the most critical parameter, which involves the periodicity of these fibrillar networks, on the stem cell fate is not yet investigated. Here, we show the effect of synthetic fibrillar networks patterned with nanometric periodicities, using bottom-up approaches, on the response of stem cells. We have used helical organic nanoribbons based on self-assemblies of Gemini-type amphiphiles to access chiral silica nanoribbons with two different shapes and periodicities (twisted ribbons and helical ribbons) from the same native self-assembled organic nanostructure. We demonstrate the covalent grafting of these silica nanoribbons onto activated glass substrates and the influence of this programmed isotropically oriented matrix to direct the commitment of human mesenchymal stem cells (hMSCs) into osteoblast lineage in vitro, free of osteogenic-inducing media. The specific periodicity of 63 nm (±5 nm) with helical ribbon shape induces specific cell adhesion through the fibrillar focal adhesion formation and leads to stem cell commitment into osteoblast lineage. In contrast, the matrix of periodicity 100 nm (±15 nm) with twisted ribbon shape does not lead to osteoblast commitment. The inhibition of non-muscle myosin II with blebbistatin is sufficient to block this osteoblast commitment on helical nanoribbon matrix, demonstrating that stem cells interpret the nanohelical shape and periodicity environment physically. These results indicate that hMSCs could interpret nanohelical shape and periodicity in the same way they sense microenvironment elasticity. This provides a promising tool to promote hMSC osteogenic capacity, which can be exploited in a 3D scaffold for bone tissue engineering.
Assuntos
Materiais Biocompatíveis/química , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/fisiologia , Nanopartículas/química , Osteoblastos/citologia , Osteoblastos/fisiologia , Osteogênese/fisiologia , Diferenciação Celular , Sobrevivência Celular , Células Cultivadas , Humanos , Nanopartículas/ultraestrutura , Propriedades de Superfície , Engenharia Tecidual/métodosRESUMO
To control specific endothelial cell (EC) functions, cell adhesive RGDS, EC specific REDV and YIGSR peptides, and angiogenic SVVYGLR sequences were covalently immobilized onto polyethylene terephthalate (PET) surfaces for the purpose of cell culture. X-ray photoelectron spectroscopy, atomic force microscopy, fluorescence microscopy and contact angle measurement were employed for characterization of surface modifications. The peptide density on PET surfaces was evaluated by fluorescence microscopy. The surfaces immobilized with peptides were exposed to human umbilical vein endothelial cells to study their specific effects onto EC functions. The results showed that the surface functionalized by these peptides enhanced the EC adhesion, spreading and migration as compared with native PET surfaces. Specifically, the RGDS peptides induced more cell adhesion than other peptides. The YIGSR and SVVYGLR sequences induced more cell spreading and cell migration, represented by intense focal adhesion at the leading edges of cell spreading and migration. The bi-functionalization of RGDS and SVVYGLR peptides (MIX) combined the advantages of both peptides and induced significant EC adhesion, spreading and migration. Our study indicates that the surface functionalization by peptides specific for ECs, especially the combination of RGDS with SVVYGLR or YIGSR peptides, has potential applications in promoting endothelialization of vascular prostheses and for construction of vascularized tissues in tissue engineering.
Assuntos
Adesão Celular , Movimento Celular , Endotélio Vascular/citologia , Peptídeos/química , Polietilenotereftalatos/química , Sequência de Aminoácidos , Células Cultivadas , Adesões Focais , Humanos , Microscopia de Força Atômica , Microscopia de Fluorescência , Espectroscopia Fotoeletrônica , Propriedades de SuperfícieRESUMO
Calcination of cyclopentadienyltitanium-based organic-inorganic hybrid materials at 450-500 °C led to the formation of anatase titanium dioxide as white powders consisting of a porous network of aggregated nanoparticles, the nanoporosity detected being related to the inter-particle space. Depending on the calcination temperatures, the surface area of the titanium dioxide particles varied from 65 to 158 m(2) g(-1).
RESUMO
The electrochemical reaction of lithium with a vacancy-containing titanium hydroxyfluoride was studied. On the basis of pair distribution function analysis, NMR, and X-ray photoelectron spectroscopy, we propose that the material undergoes partitioning upon initial discharge to form a nanostructured composite containing crystalline Li(x)TiO(2), surrounded by a Ti(0) and LiF layer. The Ti(0) is reoxidized upon reversible charging to an amorphous TiF(3) phase via a conversion reaction. The crystalline Li(x)TiO(2) is involved in an insertion reaction. The resulting composite electrode, Ti(0)-LiF/Li(x)TiO(2) â TiF(3)/ Li(y)TiO(2), allows reaction of more than one Li per Ti, providing a route to higher capacities while improving the energy efficiency compared to pure conversion chemistries.