Synthesis, characterisation and reactivity of a zinc triazenide for potential use in vapour deposition.

In this study, we synthesised and characterised a new zinc(II) triazenide for potential use in vapour deposition of zinc sulphide thin films. The compound is volatile and quantitatively sublimes at 80 °C under vacuum (0.5 mbar). Thermogravimetric analysis showed a one-step volatilisation with an onset temperature at ∼125 °C and 5% residual mass. The compound also reacted with 2 or 4 molar equivalents of triphenylsilanethiol to give dimeric and monomeric zinc thiolates, respectively. The high volatility, thermal stability, and reactivity with sterically hindered thiols makes this compound a potential candidate for use in vapour deposition of zinc containing thin films.

Uptake of Ethyl Xanthate to Metal Organic Frameworks.

As the mining industry spreads to new areas in the arctic regions, the need for re-useable efficient methods for mine chemicals' recycling increases. Especially in the case of xanthates, which are used as collectors for many metals from ore. Xanthates are very toxic to aquatic life either directly or indirectly and cause potentially severe health problems to humans after long-term exposure. In the present work, potassium ethyl xanthate (KEX) was observed to coordinate into metal organic frameworks (MOFs). HKUST-1 and its post-synthetically modified forms were observed to behave most effectively of the studied MOFs at low concentrations of KEX. Differences in the uptake of KEX were detected regarding the synthesis method in the case of MIL-100(Fe) synthetized by solvothermal and mechanochemical methods. Other studied MOFs, UiO-66 and MIL-100(Al)/MIL-96(Al), were not observed to be effective in KEX uptake.

Stereochemistry-dependent thermotropic liquid crystalline phases of monosaccharide-based amphiphiles.

Conformational rigidity controls the bulk self-assembly and liquid crystallinity from amphiphilic block molecules to copolymers. The effects of block stereochemistry on the self-assembly have, however, been less explored. Here, we have investigated amphiphilic block molecules involving eight open-chain monosaccharide-based polyol units possessing different stereochemistries, derived from D-glucose, D-galactose, L-arabinose, D-mannose and L-rhamnose (allylated monosaccharides t-Glc*, e-Glc*, t-Gal*, e-Gal*, t-Ara*, e-Ara*, t-Man*, and t-Rha*), end-functionalized with repulsive tetradecyl alkyl chain blocks to form well-defined amphiphiles with block molecule structures. All compounds studied showed low temperature crystalline phases due to polyol crystallization, and smectic (lamellar) and isotropic phases upon heating in bulk. Hexagonal cylindrical phase was additionally observed for the composition involving t-Man*. Cubic phases were observed for e-Glc*, e-Gal*, e-Ara*, and t-Rha* derived compounds. Therein, the rich array of WAXS-reflections suggested that the crystalline polyol domains are not ultra-confined in spheres as in classic cubic phases but instead show network-like phase continuity, which is rare in bulk liquid crystals. Importantly, the transition temperatures of the self-assemblies were observed to depend strongly on the polyol stereochemistry. The findings underpin that the stereochemistry in carbohydrate-based assemblies involves complexity, which is an important parameter to be considered in material design when developing self-assemblies for different functions.

Probing the Gelation Synergies and Anti-Escherichia coli Activity of Fmoc-Phenylalanine/Graphene Oxide Hybrid Hydrogel.

The N-fluorenyl-9-methyloxycarbonyl (Fmoc)-protected amino acids have shown high antimicrobial application potential, among which the phenylalanine derivative (Fmoc-F) is the most well-known representative. However, the activity spectrum of Fmoc-F is restricted to Gram-positive bacteria only. The demand for efficient antimicrobial materials expanded research into graphene and its derivatives, although the reported results are somewhat controversial. Herein, we combined graphene oxide (GO) flakes with Fmoc-F amino acid to form Fmoc-F/GO hybrid hydrogel for the first time. We studied the synergistic effect of each component on gelation and assessed the material's bactericidal activity on Gram-negative Escherichia coli (E. coli). GO flakes do not affect Fmoc-F self-assembly per se but modulate the elasticity of the gel and speed up its formation. The hybrid hydrogel affects E. coli survival, initially causing abrupt bacterial death followed by the recovery of the surviving ones due to the inoculum effect (IE). The combination of graphene with amino acids is a step forward in developing antimicrobial gels due to their easy preparation, chemical modification, graphene functionalization, cost-effectiveness, and physicochemical/biological synergy of each component.

Charge-Assisted Halogen Bonding in an Ionic Cavity of a Coordination Cage Based on a Copper(I) Iodide Cluster.

The design of molecular containers capable of selectively binding specific guest molecules presents an interesting synthetic challenge in supramolecular chemistry. Here, we report the synthesis and structure of a coordination cage assembled from Cu3 I4 - clusters and tripodal cationic N-donor ligands. Owing to the localized permanent charges in the ligand core the cage binds iodide anions in specific regions within the cage through ionic interactions. This allows the selective binding of bromomethanes as secondary guest species within the cage promoted by halogen bonding, which was confirmed by single-crystal X-ray diffraction.

Phase-selective low molecular weight organogelators derived from allylated d-mannose.

In the last decades, synthesis and design of low molecular weight organogelators has gained increasing attention due to their versatile use in, for example, cosmetics, biomedicine and oil spill remediation. In this work, three potential gelators have been prepared from allylated d-mannose. Both the gelators and the corresponding gels formed were thoroughly characterized by crystallography, FTIR spectroscopy, SEM, rheometry and NMR spectroscopy, in solution and in solid state. The results showed that two of the compounds phase-selectively form gels with hydrocarbon solvents. The most promising gelator compound is alkene terminated, with the unsaturated end functionality not critical for gel formation, tentatively providing the possibility for customizing the gelation properties by further chemical modification. Alternatively, the alkene group could possibly be utilized as a linker for future coupling to carrier materials or surfaces to further increase the mechanical strength of the gel.

Single crystal X-ray structural dataset of 1,2,4-dithiazolium tetrafluoroborate.

Herein, we present the crystallographic dataset of 1,2,4-dithiazolium tetrafluoroborate. Single crystal X-ray structural analysis evidences that the 1,2,4-dithiazolium ring is almost planar. The 1,2,4-dithiazolium and tetrafluoroborate ions contribute in hydrogen bonding wherein the N-H·N hydrogen bonding in 1,2,4-dithiazolium dimer forms an eight-membered pseudo ring with the R 2 2 ( 8 ) Etter's graph set. The information provided in this data contributes to the understanding of structural chemistry and hydrogen bonding interactions in dithiazole derivatives.

Room-Temperature Magnetic Bistability in a Salt of Organic Radical Ions.

Cocrystallization of 7,7',8,8'-tetracyanoquinodimethane radical anion (TCNQ-•) and 3-methylpyridinium-1,2,3,5-dithiadiazolyl radical cation (3-MepyDTDA+•) afforded isostructural acetonitrile (MeCN) or propionitrile (EtCN) solvates containing cofacial π dimers of homologous components. Loss of lattice solvent from the diamagnetic solvates above 366 K affords a high-temperature paramagnetic phase containing discrete TCNQ-• and weakly bound π dimers of 3-MepyDTDA+•, as evidenced by X-ray diffraction methods and magnetic susceptibility measurements. Below 268 K, a first-order phase transition occurs, leading to a low-temperature diamagnetic phase with TCNQ-• σ dimer and π dimers of 3-MepyDTDA+•. This study reveals the first example of cooperative interactions between two different organic radical ions leading to magnetic bistability, and these results are central to the future design of multicomponent functional molecular materials.

Studies of Nature of Uncommon Bifurcated I-I···(I-M) Metal-Involving Noncovalent Interaction in Palladium(II) and Platinum(II) Isocyanide Cocrystals.

Two isostructural trans-[MI2(CNXyl)2]·I2 (M = Pd or Pt; CNXyl = 2,6-dimethylphenyl isocyanide) metallopolymeric cocrystals containing uncommon bifurcated iodine···(metal-iodide) contact were obtained. In addition to classical halogen bonding, single-crystal X-ray diffraction analysis revealed a rare type of metal-involved stabilizing contact in both cocrystals. The nature of the noncovalent contact was studied computationally (via DFT, electrostatic surface potential, electron localization function, quantum theory of atoms in molecules, and noncovalent interactions plot methods). Studies confirmed that the I···I halogen bond is the strongest noncovalent interaction in the systems, followed by weaker I···M interaction. The electrophilic and nucleophilic nature of atoms participating in I···M interaction was studied with ED/ESP minima analysis. In trans-[PtI2(CNXyl)2]·I2 cocrystal, Pt atoms act as weak nucleophiles in I···Pt interaction. In the case of trans-[PdI2(CNXyl)2]·I2 cocrystal, electrophilic/nucleophilic roles of Pd and I are not clear, and thus the quasimetallophilic nature of the I···Pd interaction was suggested.

Rapid Self-Healing and Thixotropic Organogelation of Amphiphilic Oleanolic Acid-Spermine Conjugates.

Natural and abundant plant triterpenoids are attractive starting materials for the synthesis of conformationally rigid and chiral building blocks for functional soft materials. Here, we report the rational design of three oleanolic acid-triazole-spermine conjugates, containing either one or two spermine units in the target molecules, using the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction. The resulting amphiphile-like molecules 2 and 3, bearing just one spermine unit in the respective molecules, self-assemble into highly entangled fibrous networks leading to gelation at a concentration as low as 0.5% in alcoholic solvents. Using step-strain rheological measurements, we show rapid self-recovery (up to 96% of the initial storage modulus) and sol ⇔ gel transition under several cycles. Interestingly, rheological flow curves reveal the thixotropic behavior of the gels. To the best of our knowledge, this kind of behavior was not shown in the literature before, neither for a triterpenoid nor for its derivatives. Conjugate 4, having a bolaamphiphile-like structure, was found to be a nongelator. Our results indicate that the position and number of spermine units alter the gelation properties, gel strength, and their self-assembly behavior. Preliminary cytotoxicity studies of the target compounds 2-4 in four human cancer cell lines suggest that the position and number of spermine units affect the biological activity. Our results also encourage exploring other triterpenoids and their derivatives as sustainable, renewable, and biologically active building blocks for multifunctional soft organic nanomaterials.

Series of Near-IR-Absorbing Transition Metal Complexes with Redox Active Ligands.

New soluble and intensely near-IR-absorbing transition metal (Ti, Zr, V, Ni) complexes were synthesized using a redox non-innocent N,N'-bis(3,5-di-tertbutyl-2-hydroxy-phenyl) -1,2-phenylenediamine (H4L) as a ligand precursor. In all the complexes, ([Ti(Lox)2, [Zr(Lox)2], [V(Lsq1)(HLox)] and [Ni(HLox)2], two organic molecules coordinate to the metal center as tri- or tetradentate ligands. The solid-state structures of the complexes were determined using single crystal XRD, and the compounds were further characterized with Electrospray Ionisation Mass Spectrometry (ESI-MS). Thermoanalytical measurements indicated the thermal stabilities of the complexes. All compounds absorb strongly in the near-IR region and show very interesting magnetic and electrochemical properties. Moreover, it was shown that the V and Ni complexes can also convert absorbed near-IR photons to (un)paired electrons, which indicates great promise in photovoltaic applications.

Bringing a Molecular Plus One: Synergistic Binding Creates Guest-Mediated Three-Component Complexes.

Cethyl-2-methylresorcinarene (A), pyridine (B), and a set of 10 carboxylic acids (Cn) associate to form A·B·Cn ternary assemblies with 1:1:1 stoichiometry, representing a useful class of ternary systems where the guest mediates complex formation between the host and a third component. Although individually weak in solution, the combined strength of the multiple noncovalent interactions organizes the complexes even in a highly hydrogen-bond competing methanol solution, as explored by both experimental and computational methods. The interactions between A·B and Cn are dependent on the pKa values of carboxylic acids. The weak interactions between A and C further reinforce the interactions between A and B, demonstrating positive cooperativity. Our results reveal that the two-component system such as that formed by A and B can form the basis for the development of specific sensors for the molecular recognition of carboxylic acids.

Improved synthesis and application of conjugation-amenable polyols from d-mannose.

A series of polyhydroxyl sulfides and triazoles was prepared by reacting allyl and propargyl d-mannose derivatives with selected thiols and azides in thiol-ene and Huisgen click reactions. Conformational analysis by NMR spectroscopy proved that the intrinsic rigidity and linear conformation of the mannose derived polyol backbone is retained in the final click products in solution. Single crystal X-ray structure determination of one of the compounds prepared further verified that the linear conformation of the polyol segment is also retained in the solid state. In addition, an improved method for direct Barbier-type propargylation of unprotected d-mannose is reported. The new reaction protocol, involving tin-mediated propargylation in an acetonitrile-water mixture, provides access to multigram quantities of the desired, valuable alkyne polyol without relying on protecting group manipulations or chromatographic purification.

Gold Nanoparticles on 3D-Printed Filters: From Waste to Catalysts.

Three-dimensionally printed solid but highly porous polyamide-12 (PA12) plate-like filters were used as selective adsorbents for capturing tetrachloroaurate from acidic solutions and leachates to prepare PA12-Au composite catalysts. The polyamide-adsorbed tetrachloroaurate can be readily reduced to gold nanoparticles by using sodium borohydride, ascorbic acid, hydrogen peroxide, UV light, or by heating. All reduction methods led to polyamide-anchored nanoparticles with an even size distribution and high dispersion. The particle sizes were somewhat dependent on the reduction method, but the average diameters were typically about 20 nm. Particle sizes were determined by using a combination of single-particle inductively coupled plasma mass spectrometry, helium ion microscopy, and powder X-ray diffraction. Dispersion of the particles was analyzed by scanning electron microscopy with energy-dispersive spectroscopy. Due to the high adsorption selectivity of polyamide-12 toward tetrachloroaurate, the three-dimensional-printed filters were first used as selective gold scavengers for the acidic leachate of electronicwaste (WEEE). The supported nanoparticles were then generated directly on the filter via a simple reduction step. These objects were used as catalysts for the reduction of 4-nitrophenol to 4-aminophenol. The described method provides a direct route from waste to catalysts. The selective laser sintering method can be used to customize the flow properties of the catalytically active filter object, which allows the optimization of the porous catalytic object to meet the requirements of catalytic processes.

Metal Doping of Au25(SR)18- Clusters: Insights and Hindsights.

The study of the structures and properties of atomically precise gold nanoclusters is the object of active research worldwide. Recently, research has been also focusing on the doping of metal nanoclusters through introduction of noble metals, such as platinum, and less noble metals, such as cadmium and mercury. Previous studies, which relied extensively on the use of mass spectrometry and single-crystal X-ray crystallography, led to the assignment of the location of each of these foreign-metal atoms. Our study provides new insights into this topic and, particularly, compelling evidence about the actual position of the selected metal atoms M = Pt, Pd, Hg, and Cd in the structure of Au24M(SR)180. To make sure that the results were not dependent on the thiolate, for SR we used both butanethiolate and phenylethanethiolate. The clusters were prepared according to different literature procedures that were supposed to lead to different doping positions. Use of NMR spectroscopy and isotope effects, with the support of mass spectrometry, electrochemistry, and single-crystal X-ray crystallography, led us to confirm that noble metals indeed dope the cluster at its central position, whereas no matter how the doping reaction is conducted and the nature of the ligand, the position of both Cd and Hg is always on the icosahedron shell, rather than at the central or staple position, as often reported. Our results not only provide a reassessment of previous conclusions, but also highlight the importance of NMR spectroscopy studies and cast doubts on drawing conclusions mostly based on single-crystal X-ray crystallography.

Spin Switching with Triazolate-Strapped Ferrous Porphyrins.

Fe(III) porphyrins bridged with 1,2,3-triazole ligands were synthesized. Upon deprotonation, the triazolate ion coordinates to the Fe(III) ion, forming an overall neutral high-spin Fe(III) porphyrin in which the triazolate serves both as an axial ligand and as the counterion. The second axial coordination site is activated for coordination and binds p-methoxypyridine, forming a six-coordinate low-spin complex. Upon addition of a phenylazopyridine as a photodissociable ligand, the spin state of the complex can be reversibly switched with ultraviolet and visible light. The system provides the basis for the development of switchable catalase- and peroxidase-type catalysts and molecular spin switches.

Selective Laser Sintering of Metal-Organic Frameworks: Production of Highly Porous Filters by 3D Printing onto a Polymeric Matrix.

Metal-organic frameworks (MOFs) have raised a lot of interest, especially as adsorbing materials, because of their unique and well-defined pore structures. One of the main challenges in the utilization of MOFs is their crystalline and powdery nature, which makes their use inconvenient in practice. Three-dimensional printing has been suggested as a potential solution to overcome this problem. We used selective laser sintering (SLS) to print highly porous flow-through filters containing the MOF copper(II) benzene-1,3,5-tricarboxylate (HKUST-1). These filters were printed simply by mixing HKUST-1 with an easily printable nylon-12 polymer matrix. By using the SLS, powdery particles were fused together in such a way that the structure of the printed solid material resembles the structure of a powder bed. The MOF additive is firmly attached only on the surface of partially fused polymer particles and therefore remains accessible to fluids passing through the filter. Powder X-ray analysis of the printed object confirmed that printing did not have any negative impact on the structure of the MOF. CO2 -adsorption studies also showed that the activity of the MOF was not affected by the printing process. SLS offers a straightforward and easy way to fabricate tailor-made MOF-containing filters for practical applications.

Non-Innocent Base Properties of 3- and 4-Pyridyl-dithia- and Diselenadiazolyl Radicals: The Effect of N-Methylation.

Condensation of persilylated nicotinimideamide and isonicotinimideamide with sulfur monochloride affords double salts of the 3-, 4-pyridyl-substituted 1,2,3,5-dithiadiazolylium DTDA cations of the general formula [3-, 4-pyDTDA][Cl][HCl] in which the pyridyl nitrogen serves as a noninnocent base. Reduction of these salts with triphenylantimony followed by deprotonation of the intermediate-protonated radical affords the free base radicals [3-, 4-pyDTDA], the crystal structures of which, along with those of their diselenadiazolyl analogues [3-, 4-pyDSDA], have been characterized by powder or single-crystal X-ray diffraction. The crystal structures consist of "pancake" π-dimers linked head-to-tail into ribbonlike arrays by η2-S2---N(py) intermolecular secondary bonding interactions. Methylation of the persilylated (iso)nicotinimide-amides prior to condensation with sulfur monochloride leads to N-methylated double chloride salts Me[3-, 4-pyDTDA][Cl]2, which can be converted by metathesis into the corresponding triflates Me[3-, 4-pyDTDA][OTf]2 and then reduced to the N-methylated radical triflates Me[3-, 4-pyDTDA][OTf]. The crystal structures of both the N-methylated double triflate and radical triflate salts have been determined by single-crystal X-ray diffraction. The latter consist of trans-cofacial π-dimers strongly ion-paired with triflate anions. Variable temperature magnetic susceptibility measurements on both the neutral and radical ion dimers indicate that they are diamagnetic over the temperature range 2-300 K.

Thermal, Spectroscopic, and Crystallographic Analysis of Mannose-Derived Linear Polyols.

The major diastereomer formed in the Barbier-type metal-mediated allylation of d-mannose has previously been shown to adopt a perfectly linear conformation, both in solid state and in solution, resulting in the formation of hydrogen-bonded networks and subsequent aggregation from aqueous solution upon stirring. Here, a comprehensive study of the solid state structure of both the allylated d-mannose and its racemic form has been conducted. The binary melting point diagram of the system was determined by differential scanning calorimetry analysis, and the obtained results, along with structure determination by single crystal X-ray diffraction, confirmed that allylated mannose forms a true racemate. Further examination by powder X-ray diffraction and CP MAS 13C NMR spectroscopy revealed polymorphism both in the pure enantiomer and in the racemate. In addition, the propargylated and hydrogenated analogues of allylated d-mannose were prepared and subjected to thermal and spectroscopic analyses. The crystal structure of the propargylated compound was successfully determined, showing a linear molecular conformation similar to that found for allylated d-mannose. Both new compounds likewise display aggregation behavior in water, further verifying that the low-energy linear conformation plays a significant role in this unusual behavior of these rodlike mannose derivatives.

High-Generation Amphiphilic Janus-Dendrimers as Stabilizing Agents for Drug Suspensions.

Pharmaceutical nanosuspensions are formed when drug crystals are suspended in aqueous media in the presence of stabilizers. This technology offers a convenient way to enhance the dissolution of poorly water-soluble drug compounds. The stabilizers exert their action through electrostatic or steric interactions, however, the molecular requirements of stabilizing agents have not been studied extensively. Here, four structurally related amphiphilic Janus-dendrimers were synthesized and screened to determine the roles of different macromolecular domains on the stabilization of drug crystals. Physical interaction and nanomilling experiments have substantiated that Janus-dendrimers with fourth generation hydrophilic dendrons were superior to third generation analogues and Poloxamer 188 in stabilizing indomethacin suspensions. Contact angle and surface plasmon resonance measurements support the hypothesis that Janus-dendrimers bind to indomethacin surfaces via hydrophobic interactions and that the number of hydrophobic alkyl tails determines the adsorption kinetics of the Janus-dendrimers. The results showed that amphiphilic Janus-dendrimers adsorb onto drug particles and thus can be used to provide steric stabilization against aggregation and recrystallization. The modular synthetic route for new amphiphilic Janus-dendrimers offers, thus, for the first time a versatile platform for stable general-use stabilizing agents of drug suspensions.